orthopedicsautomotiveexoskeletonaerospacedefensework place ergonomicsconsumer productsfurnituresports

Body part

handwristupper extremityshouldertrunkspinehiplower extremitykneeanklefootmandibleelbowleg

Research area

seatinggaitmethodsFEAanimaloccupational healthvalidationsensitivity analysisrehab

Year 854 Publications Keywords
2022 Hu J, Xiong R, Chen X, Chen Z, Jin Z (2022), "Effect of components mal-alignment on biomechanics in fixed unicompartmental knee arthroplasty using multi-body dynamics model during a walking cycle", Med. Eng. Phys., vol. 100, pp. 103747. [DOIWWW] NEWorthopedicsknee
2021 Alexander N, Schwameder H, Baker R, Trinler U (2021), "Effect of different walking speeds on joint and muscle force estimation using AnyBody and OpenSim", Gait Posture. [DOIWWW] lower extremitygait
2021 Alt T, Komnik I, Severin J, Nodler YT, Benker R, Knicker AJ, Brüggemann GP, Strüder HK (2021), "Swing Phase Mechanics of Maximal Velocity Sprints-Does Isokinetic Lower-Limb Muscle Strength Matter?", Int. J. Sports Physiol. Perform., pp. 1-11. [DOI] sportshiplower extremityknee
2021 Andersen MS (2021), "4 - Introduction to musculoskeletal modelling", Book Chapter, In: Jin Z, Li J, Chen Z (Ed): Computational Modelling of Biomechanics and Biotribology in the Musculoskeletal System (Second Edition), pp. 41-80. [DOIWWW] methods
2021 Andersen MS, Dzialo CM, Marra MA, Pedersen D (2021), "A Methodology to Evaluate the Effects of Kinematic Measurement Uncertainties On Knee Ligament Properties Estimated From Laxity Measurements", J. Biomech. Eng.. [DOI] orthopedicskneemethods
2021 Asayama A, Tateuchi H, Yamagata M, Ichihashi N (2021), "Influence of stance width and toe direction on medial knee contact force during bodyweight squats", J. Biomech., pp. 110824. [DOIWWW] orthopedicssportslower extremityknee
2021 Askari E, Andersen MS (2021), "An anatomy-based dynamic model of total knee arthroplasty", Nonlinear Dyn.. [DOI] lower extremitykneeFEA
2021 Bahramian M, Shayestehpour MA, Yavari M (2021), "Musculoskeletal injury risk assessment in a car dashboard assembly line using various quantitative and qualitative tools", . [WWW] NEWautomotivework place ergonomicsspine
2021 Bai S, Islam MR, Power V, OŚullivan L (2021), "User-centered development and performance assessment of a modular full-body exoskeleton (AXO-SUIT)", Biomimetic Intelligence and Robotics, pp. 100032. [DOIWWW] NEWexoskeleton
2021 Barba N, Ignasiak D, Villa TMT, Galbusera F, Bassani T (2021), "Assessment of trunk muscle activation and intervertebral load in adolescent idiopathic scoliosis by musculoskeletal modelling approach", J. Biomech., vol. 114, pp. 110154. [DOI] spine
2021 Bardin AL, Tang L, Panizzi L, Rogers CW, Colborne GR (2021), "Development of An Anybody Musculoskeletal Model of The Thoroughbred Forelimb", J. Equine Vet. Sci., vol. 103, pp. 103666. [DOIWWW] animal
2021 Bilde Simonsen M, Pessoto Hirata R, Næsborg-Andersen K, Derek Christian Leutscher P, Hørslev-Petersen K, Woodburn J, Skipper Andersen M (2021), "Different types of foot orthoses effect on gait mechanics in patients with rheumatoid arthritis", J. Biomech., pp. 110496. [DOIWWW] orthopedicslower extremityfootgait
2021 Brund RB, Waagepetersen R, Nielsen RO, Rasmussen J, Nielsen MS, Andersen CH, de Zee M (2021), "How Precisely Can Easily Accessible Variables Predict Achilles and Patellar Tendon Forces during Running?", Sensors. [PDFDOIWWW] sportslower extremity
2021 Burks G, Lee Y, Kim S, Ye Y, Beiter B, Herron C, Shi Y, Leonessa A, Du J, Srinivasan D (2021), "A Framework for Virtual Reality-Based Motor Skills Training for the Use of Exoskeletons", Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 65, pp. 277-278. [DOI] NEWexoskeleton
2021 Błażkiewicz M (2021), "Joint loads and muscle force distribution during classical and jazz pirouettes", Acta Bioeng. Biomech., vol. 23. [DOIWWW] sports
2021 Chen Z, Fan X, Gao Y, Zhang J, Guo L, Chen S, Jin Z (2021), "Effect of Rotator Cuff Deficiencies on Muscle Forces and Glenohumeral Contact Force After Anatomic Total Shoulder Arthroplasty Using Musculoskeletal Multibody Dynamics Simulation", Frontiers in Bioengineering and Biotechnology, vol. 9, pp. 579. [DOIWWW] orthopedicsshoulder
2021 David S, Potthast W (2021), "Control strategies during fast turning manoeuvers - the free moment and its contribution to body rotation and joint loading", J. Sports Sci., pp. 1-9. [DOI] sportslower extremityknee
2021 De Pieri E, Friesenbichler B, List R, Monn S, Casartelli NC, Leunig M, Ferguson SJ (2021), "Subject-Specific Modeling of Femoral Torsion Influences the Prediction of Hip Loading During Gait in Asymptomatic Adults", Front Bioeng Biotechnol, vol. 9, pp. 679360. [DOI] orthopedicshiplower extremitygait
2021 De Roeck J, Duquesne K, Van Houcke J, Audenaert EA (2021), "Statistical-Shape Prediction of Lower Limb Kinematics During Cycling, Squatting, Lunging, and Stepping-Are Bone Geometry Predictors Helpful?", Front Bioeng Biotechnol, vol. 9, pp. 696360. [PDFDOI] orthopedicssportslower extremitymethods
2021 Demirel HO, Ahmed S, Duffy VG (2021), "Digital Human Modeling: A Review and Reappraisal of Origins, Present, and Expected Future Methods for Representing Humans Computationally", International Journal of Human–Computer Interaction, pp. 1-41. [DOI] orthopedicsautomotivework place ergonomicsmethods
2021 Dupré T (2021), "Groin injuries in soccer", Ph.D. Thesis, Deutsche Sporthochschule Köln. sports
2021 Dupré T, Tryba J, Potthast W (2021), "Muscle activity of cutting manoeuvres and soccer inside passing suggests an increased groin injury risk during these movements", Sci. Rep., vol. 11, pp. 7223. [DOI] sportshipknee
2021 Duquesne K, Galibarov P, Salazar-Torres JD, Audenaert E (2021), "Statistical kinematic modelling: concepts and model validity", Comput. Methods Biomech. Biomed. Engin., pp. 1-12. [DOI] gaitmethods
2021 Firouzabadi A, Arjmand N, Pan F, Zander T, Schmidt H (2021), "Sex-Dependent Estimation of Spinal Loads During Static Manual Material Handling Activities-Combined in vivo and in silico Analyses", Front Bioeng Biotechnol, vol. 9, pp. 750862. [PDFDOI] work place ergonomicsspine
2021 Fonk R, Schneeweiss S, Simon U, Engelhardt L (2021), "Hand Motion Capture from a 3D Leap Motion Controller for a Musculoskeletal Dynamic Simulation", Sensors , vol. 21. [DOI] hand
2021 Franţ GM, Bărbuceanu RC, Argeşanu V, Petraşcu IM, Borozan IS (2021), "Contributions to increase the safety of road vehicles by optimizing passive systems using AnyBody software", In: 2021 IEEE 19th International Symposium on Intelligent Systems and Informatics (SISY), pp. 153-158. [DOI] automotiveupper extremityshoulder
2021 Fritzsche L (2021), "Ergonomie 4.0 – Herausforderungen und Chancen der Industrie 4.0 für die Gestaltung menschengerechter Arbeitsplätze", In: Interdisziplinäre Wissenschaftliche Konferenz Mittweida. [DOI] exoskeletonwork place ergonomics
2021 Fritzsche L, Galibarov P, Gärtner C, Bornmann J, Damsgaard M, Wall R, Schirrmeister B, Gonzalez-Vargas J, Pucci D, Maurice P (2021), "Assessing the efficiency of exoskeletons in physical strain reduction by biomechanical simulation with AnyBody Modelling System", HAL. exoskeletonwork place ergonomicsupper extremity
2021 Fukaya T, Mutsuzaki H, Aoyama T, Watanabe K, Mori K (2021), "A Simulation Case Study of Knee Joint Compressive Stress during the Stance Phase in Severe Knee Osteoarthritis Using Finite Element Method", Medicina , vol. 57. [DOI] lower extremitykneeFEA
2021 Hansen CE, Stensvig M, Wienecke J, Villa C, Lorentzen J, Rasmussen J, Simonsen EB (2021), "Factors correlated with running economy among elite middle- and long-distance runners", Physiol Rep, vol. 9, pp. e15076. [DOI] sportslower extremity
2021 Hua X, Li J, De Pieri E, Ferguson S (2021), "Multiscale biomechanics of the biphasic articular cartilage in the natural hip joint during routine activities", Comput. Methods Programs Biomed., pp. 106606. [DOIWWW] NEWorthopedicshipFEA
2021 Ishii C, Takahashi K (2021), "Evaluation of Lumbar Burdens for Endoskeleton-Type Assist Suit Based on Musculoskeletal Model and Its Improvement of the Utility", In: 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 9518-9523. [DOI] NEWexoskeletonspine
2021 JianQiao Peng M, Wong T, Ma L, Hu Y, Bo B (2021), "Dynamic analysis for flexion and extension of elbow joint motion based on musculoskeletal model of Anybody", Int. J. Med. Robot., pp. e2321. [DOI] orthopedicsFEA
2021 JianQiao Peng M, Wong TM, Ma L, Hu Y, To M (2021), "Dynamic effect of 3 locking plates fixated to humeral fracture based on multibody musculoskeletal model", Int. J. Med. Robot., pp. e2323. [DOI] orthopedicsFEA
2021 Kersting UG, Støttrup N, Larsen FG (2021), "The influence of shaft stiffness on joint kinematics and kinetics during hiking", J. Biomech., pp. 110643. [DOIWWW] sportskneeankle
2021 Kessels I, Koopman B, Verdonschot N, Marra M, Gijsbertse K (2021), "The Added Value of Musculoskeletal Simulation for the Study of Physical Performance in Military Tasks", Sensors , vol. 21. [PDFDOI] defenselower extremity
2021 Lace KL, Błażkiewicz M (2021), "How does the ski boot affect human gait and joint loading?", Biomed. Hum. Kinet., vol. 13, pp. 163-169. [DOIWWW] sportsgait
2021 Liming S, Hailong S (2021), "Muscle force response characteristics of the slipping leg after an unexpected slip", Chinese Journal of Tissue Engineering Research, vol. 25, pp. 1184. [DOI] lower extremity
2021 Liu YX, Zhang L, Wang R, Smith C, Gutierrez-Farewik EM (2021), "Weight Distribution of a Knee Exoskeleton Influences Muscle Activities During Movements", IEEE Access, vol. 9, pp. 91614-91624. [DOI] exoskeletonknee
2021 Melzner M, Engelhardt L, Simon U, Dendorfer S (2021), "Electromyography Based Validation of a Musculoskeletal Hand Model", J. Biomech. Eng.. [DOI] handvalidation
2021 Melzner M, Ismail KM, Rušavý Z, Kališ V, Süß F, Dendorfer S (2021), "Musculoskeletal lower back load of accoucheurs during childbirth - A pilot and feasibility study", Eur. J. Obstet. Gynecol. Reprod. Biol., vol. 264, pp. 306-313. [DOI] orthopedicswork place ergonomicsspine
2021 Melzner M, Süß F, Dendorfer S (2021), "The impact of anatomical uncertainties on the predictions of a musculoskeletal hand model - a sensitivity study", Comput. Methods Biomech. Biomed. Engin., pp. 1-9. [DOI] handvalidation
2021 Miura T, Miyakoshi N, Saito K, Kijima H, Iida J, Hatakeyama K, Suzuki K, Komatsu A, Iwami T, Matsunaga T, Shimada Y (2021), "Association between global sagittal malalignment and increasing hip joint contact force, analyzed by a novel musculoskeletal modeling system", PLoS One, vol. 16, pp. e0259049. [DOI] orthopedicsspinehip
2021 Oh J, Kuenze C, Signorile JF, Andersen MS, Letter M, Best TM, Ripic Z, Emerson C, Eltoukhy M (2021), "Estimation of ground reaction forces during stair climbing in patients with ACL reconstruction using a depth sensor-driven musculoskeletal model", Gait Posture, vol. 84, pp. 232-237. [DOI] lower extremitykneemethods
2021 Peng Y, Niu W, Wong DW, Wang Y, Chen TL, Zhang G, Tan Q, Zhang M (2021), "Biomechanical Comparison among Five Mid/hindfoot Arthrodeses Procedures in Treating Flatfoot Using a Musculoskeletal Multibody Driven Finite Element Model", Comput. Methods Programs Biomed., pp. 106408. [DOIWWW] footFEA
2021 Peng Y, Wai-Chi Wong D, Lin-Wei Chen T, Wang Y, Zhang G, Yan F, Zhang M (2021), "Influence of Arch Support Heights on the Internal Foot Mechanics of Flatfoot during Walking: A Muscle-Driven Finite Element Analysis", Comput. Biol. Med., pp. 104355. [DOIWWW] lower extremityfoot
2021 Peng Y, Wang Y, Wong DW, Chen TL, Zhang G, Tan Q, Zhang M (2021), "Extrinsic foot muscle forces and joint contact forces in flexible flatfoot adult with foot orthosis: A parametric study of tibialis posterior muscle weakness", Gait Posture, vol. 88, pp. 54-59. [DOI] lower extremityfoot
2021 Rasmussen J, Iversen K, Engelund BK, Rasmussen S (2021), "Biomechanical Evaluation of the Effect of Minimally Invasive Spine Surgery Compared with Traditional Approaches in Lifting Tasks", Frontiers in Bioengineering and Biotechnology. [PDFDOI] orthopedicsspine
2021 Rydén A, Martinsson A (2021), "Evaluation of 3D motion capture data from a deep neural network combined with a biomechanical model", Thesis. [WWW] methods
2021 Saito T, Ogihara N, Takei T, Seki K (2021), "Musculoskeletal Modeling and Inverse Dynamic Analysis of Precision Grip in the Japanese Macaque", Front. Syst. Neurosci., vol. 15, pp. 151. [PDFDOIWWW] NEWanimal
2021 Schmalz T, Colienne A, Bywater E, Fritzsche L, Gärtner C, Bellmann M, Reimer S, Ernst M (2021), "A passive back-support exoskeleton for manual materials handling: Reduction of low back loading and metabolic effort during repetitive lifting", IISE Trans Occup Ergon Hum Factors, pp. 1-15. [DOIWWW] exoskeletonspine
2021 Shayestehpour H, Rasmussen J, Galibarov P, Wong C (2021), "An articulated spine and ribcage kinematic model for simulation of scoliosis deformities", Multibody Syst. Dyn.. [DOI] upper extremityspine
2021 Skals S, Bláfoss R, Andersen LL, Andersen MS, de Zee M (2021), "Manual material handling in the supermarket sector. Part 2: Knee, spine and shoulder joint reaction forces", Appl. Ergon., vol. 92, pp. 103345. [DOI] shoulderspineknee
2021 Skals S, Bláfoss R, de Zee M, Andersen LL, Andersen MS (2021), "Effects of load mass and position on the dynamic loading of the knees, shoulders and lumbar spine during lifting: a musculoskeletal modelling approach", Appl. Ergon., vol. 96, pp. 103491. [DOIWWW] work place ergonomicsshoulderspineknee
2021 Skals SL (2021), "Musculoskeletal modelling of manual material handling in the supermarket sector", Ph.D. Thesis, Aalborg University, Denmark. work place ergonomicsupper extremityshoulderspine
2021 Skejø SD, Lund ME, Stensvig M, Kaae NM, Rasmussen J (2021), "Running in circles: Describing running kinematics using Fourier series", J. Biomech., vol. 115, pp. 110187. [DOI] sportsmethods
2021 Stensgaard Stoltze J, Pallari J, Eskandari B, Oliveira AS, Pirscoveanu CI, Rasmussen J, Andersen MS (2021), "Development and Functional Testing of An Unloading Concept for Knee Osteoarthritis Patients: A Pilot Study", J. Biomech. Eng.. [DOI] orthopedicslower extremityknee
2021 Sylvester AD, Lautzenheiser SG, Kramer PA (2021), "A review of musculoskeletal modelling of human locomotion", Interface Focus, vol. 11, pp. 20200060. [PDFDOI] orthopedicslower extremitygait
2021 Sylvester AD, Lautzenheiser SG, Kramer PA (2021), "Muscle forces and the demands of human walking", Biol. Open, vol. 10. [PDFDOI] lower extremitygait
2021 Takanori CHIHARA, Kohei SEKINE, Takahiro TANAKA, Jiro SAKAMOTO, Kenji KAWANO and Takashi KAWAGOE (2021), "An experimental and simulation-based evaluation of the effect of seat angle on muscle load for perching", The Japan Society of Mechanical Engineers, vol. advpub. [DOI] automotive
2021 Tzanetis P, Marra MA, Fluit R, Koopman B, Verdonschot N (2021), "Biomechanical Consequences of Tibial Insert Thickness after Total Knee Arthroplasty: A Musculoskeletal Simulation Study", Applied sciences. [DOIWWW] orthopedicsknee
2021 Unnikrishnan G, Xu C, Baggaley M, Tong J, Kulkarni S, Edwards WB, Reifman J (2021), "Effects of body size and load carriage on lower-extremity biomechanical responses in healthy women", BMC Musculoskelet. Disord., vol. 22, pp. 219. [DOI] lower extremity
2021 Wang Z, Wu X, Zhang Y, Chen C, Liu S, Liu Y, Peng A, Ma Y (2021), "A Semi-active Exoskeleton Based on EMGs Reduces Muscle Fatigue When Squatting", Front. Neurorobot., vol. 15, pp. 30. [DOIWWW]
2021 Weber M, SuessEng F, Jerabek SA, Meyer M, Grifka J, Renkawitz T, Eng SD (2021), "Kinematic pelvic tilt during gait alters functional cup position in total hip arthroplasty", J. Orthop. Res.. [DOI] hiplower extremitygait
2021 Weiske F, Böhme M, Jäkel J, Zentner J, Witt M (2021), "Stair ascent comparison of lower limb kinematics with differing time normalization techniques", J. Biomech., vol. 119, pp. 110316. [DOI] lower extremity
2021 Wolf P, Rausch J, Hennes N, Potthast W (2021), "The effects of joint angle variability and different driving load scenarios on maximum muscle activity – A driving posture simulation study", Int. J. Ind. Ergon., vol. 84, pp. 103161. [DOIWWW] automotivework place ergonomics
2021 Xiong B, Yang P, Lin T, Xu J, Xie Y, Guo Y, Liu C, Zhou Q, Lai Q, Wei Q, He W, Zhang Q (2021), "Changes in hip joint contact stress during a gait cycle based on the individualized modeling framework of"gait-musculoskeletal system-finite element"", . [DOIWWW] gaitFEA
2021 Xu Z, Yan F, Chen TL, Zhang M, Wong DW, Jiang WT, Fan YB (2021), "Non-amputated limb muscle coordination of unilateral transfemoral amputees", J. Biomech., vol. 115, pp. 110155. [DOI] gait
2021 Yamagata M, Taniguchi M, Tateuchi H, Kobayashi M, Ichihashi N (2021), "The effects of knee pain on knee contact force and external knee adduction moment in patients with knee osteoarthritis", J. Biomech., vol. 123, pp. 110538. [DOIWWW] lower extremitykneegait
2021 Zadoń H, Nowakowska-Lipiec K, Michnik R, Zadoń H (2021), "A Sitting or Standing Position--Which One Exerts More Loads on the Musculoskeletal System of the Lumbar Spine? Comparative Tests Based on the Methods of Mathematical Modelling", [WWW] spine
2021 Zaïri F, Moulart M, Fontaine C, Zaïri F, Tiffreau V, Logier R (2021), "Relevance of a novel external dynamic distraction device for treating back pain", Proc. Inst. Mech. Eng. H, vol. 235, pp. 264-272. [DOI] exoskeletonspine
2021 Zhang L, Liu Y, Wang R, Smith C, Gutierrez-Farewik EM (2021), "Modeling and Simulation of a Human Knee Exoskeleton's Assistive Strategies and Interaction", Front. Neurorobot., vol. 15, pp. 13. [DOIWWW] exoskeletonknee
2021 Zongxing L, Shengxian Y, Xiangwen W, Xiaohui C, Chao J (2021), "The Effect of Crank Length Changes from Cycling Rehabilitation on Muscle Behaviors", Appl. Bionics Biomech., vol. 2021. [DOIWWW] sports
2021 des Doktorgrades der Humanwissenschaften (Dr. sc DZ (2021), "The influence of mental stress on the musculoskeletal human back during static posture and trunk motion", Thesis. trunkspine
2020 Asadi F, Arjmand N (2020), "Marker-less versus marker-based driven musculoskeletal models of the spine during static load-handling activities", J. Biomech., vol. 112, pp. 110043. [DOI] work place ergonomicsspinemethods
2020 Askari E, Andersen MS (2020), "Effect of Joint Laxity On Nonlinear Dynamics and Wear Prediction of Knee Prostheses", J. Biomech. Eng.. [DOI] orthopedicsknee
2020 Auer S, Kubowitsch S, Süß F, Renkawitz T, Krutsch W, Dendorfer S (2020), "Mental stress reduces performance and changes musculoskeletal loading in football-related movements", Science and Medicine in Football, pp. 1-7. [DOI] sports
2020 Aurbach M, Špička J, Süß F, Vychytil J, Havelková L, Ryba T, Dendorfer S (2020), "Torus obstacle method as a wrapping approach of the deltoid muscle group for humeral abduction in musculoskeletal simulation", J. Biomech., pp. 109864. [DOIWWW] shouldermethods
2020 Baldoni M (2020), "Computational Analysis of the Lumbar Spine Kinetics", Ph.D. Thesis, University of Miami. [WWW] orthopedicsspine
2020 Bardin A (2020), "Predicting horse limb responses to surface variations with a 3D musculoskeletal model", Ph.D. Thesis. animal
2020 Cappetti N, Naddeo A, Soldovieri VM, Vitillo I, Fiorillo I (2020), "Perceived Comfort and Muscular Activity: A Virtual Assessment of Possible Correlations", In: Design Tools and Methods in Industrial Engineering, pp. 59-70. [DOI] upper extremitymethods
2020 Castro MN, Rahman T, Nicholson KF, Rasmussen J, Bai S, Andersen MS (2020), "A Case Study on Designing a Passive Feeding-Assistive Orthosis for Arthrogryposis", J. Med. Device., vol. 14. [DOIWWW] exoskeletonupper extremity
2020 Chander DS, Cavatorta MP (2020), "Modelling Interaction Forces at a Curved Physical Human-Exoskeleton Interface", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 217-225. [DOI] exoskeletonwork place ergonomics
2020 De Roeck J, Van Houcke J, Almeida D, Galibarov P, De Roeck L, Audenaert EA (2020), "Statistical Modeling of Lower Limb Kinetics During Deep Squat and Forward Lunge", Front Bioeng Biotechnol, vol. 8, pp. 233. [DOI] hipknee
2020 Deane NC (2020), "Pressure Monitoring Based Identification of the EOD Suit: Human Interface Load Distribution and Ergonomics", Ph.D. Thesis, University of Massachusetts Lowell. [WWW] defensework place ergonomics
2020 Dejtiar DL, Bartsoen L, Wesseling M, Wirix-Speetjens R, Sloten JV, Perez MA (2020), "Standard Cruciate-Retaining Total Knee Arthroplasty Implants can Reproduce Native Kinematics", In: F. Rodriguez Y Baena and F. Tatti (eds.) (Ed): CAOS 2020 (EPiC Series in Health Sciences, vol. 4), pp. 61–64. orthopedicsknee
2020 Dupré T, Potthast W (2020), "Groin injury risk of pubertal soccer players increases during peak height velocity due to changes in movement techniques", J. Sports Sci., pp. 1-9. [DOI] sportslower extremity
2020 El-Edrissi O (2020), "Contribution of an upper body stick-figure model for subject-specific scaling approaches of generic musculoskeletal models in the AnyBody Modelling System", Masters Thesis, Deutsche Sporthochschule Köln. [DOI] methods
2020 Engelhardt L, Melzner M, Havelkova L, Fiala P, Christen P, Dendorfer S, Simon U (2020), "A new musculoskeletal AnyBody™ detailed hand model", Comput. Methods Biomech. Biomed. Engin., pp. 1-11. [DOI] hand
2020 Ferle M (2020), "The soft-tissue restraints of the knee and its balancing capacity in total knee arthroplasty procedures", Ph.D. Thesis, Gottfried Wilhelm Leibniz Universitat Hannover . [WWW] orthopedicskneevalidation
2020 Gao F, Zong S, Han ZW, Xiao Y, Gao ZH (2020), "Musculoskeletal computational analysis on muscle mechanical characteristics of drivers’ lumbar vertebras and legs in different sitting postures", Rev. Assoc. Med. Bras., vol. 66, pp. 637-642. [DOIWWW] automotivespinelower extremityseating
2020 Ghezelbash F, Shirazi-Adl A, Plamondon A, Arjmand N (2020), "Comparison of different lifting analysis tools in estimating lower spinal loads - Evaluation of NIOSH criterion", J. Biomech., vol. 112, pp. 110024. [DOI] work place ergonomicsspine
2020 Groß SJ (2020), "Muscle Fatigue in Musculoskeletal Numerical Models", Thesis, Universität Regensburg/Regensburg University, Germany. [WWW] methods
2020 Hedegaard M, Anvari-Moghaddam A, Jensen BK, Jensen CB, Pedersen MK, Samani A (2020), "Prediction of energy expenditure during activities of daily living by a wearable set of inertial sensors", Med. Eng. Phys., vol. 75, pp. 13-22. [DOI] gaitmethods
2020 Hungenahalli Shivanna B (2020), "Musculoskeletal modeling of ballet", Thesis. [WWW] sports
2020 Kawada M, Takeshita Y, Miyazaki T, Nakai Y, Hata K, Nakatsuji S, Kiyama R (2020), "Contribution of hip and knee muscles to lateral knee stability during gait", J. Phys. Therapy Sci., vol. 32, pp. 729-734. [DOI] kneegait
2020 Kitagawa K, Nishisako Y, Nagasaki T, Nakano S, Hida M, Okamatsu S, Wada C (2020), "Regression equation between required force and lumbar load of caregiver in supporting standing-up motion via computational musculoskeletal simulation", Pertanika J. Sci. Technol., vol. 28. [DOIWWW] work place ergonomicsspine
2020 Koo YJ, Jung Y, Seon JK, Koo S (2020), "Anatomical ACL Reconstruction can Restore the Natural Knee Kinematics than Isometric ACL Reconstruction During the Stance Phase of Walking", International Journal of Precision Engineering and Manufacturing. [DOI] orthopedicsknee
2020 Kurpiers N, McAlpine P, Kersting UG (2020), "A biomechanical field testing approach in snow sports: Case studies toward a detailed analysis of joint loading", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120918037. [DOI] sportslower extremity
2020 Larsen FG, Svenningsen FP, Andersen MS, de Zee M, Skals S (2020), "Estimation of Spinal Loading During Manual Materials Handling Using Inertial Motion Capture", Ann. Biomed. Eng., vol. 48, pp. 805-821. [DOI] work place ergonomicsspine
2020 Liu X, Huang H, Ren S, Ao Y, Rong Q (2020), "Anterior Cruciate Ligament Injuries Alter the Kinematics and Kinetics of Knees with or Without Meniscal Deficiency", In: Multibody Dynamics 2019, pp. 11-17. [DOI] kneegait
2020 Liu X, Huang H, Ren S, Rong Q, Ao Y (2020), "Use of the normalcy index for the assessment of abnormal gait in the anterior cruciate ligament deficiency combined with meniscus injury", Comput. Methods Biomech. Biomed. Engin., pp. 1-7. [DOI] orthopedicskneegait
2020 Liu X, Huang H, Yin W, Ren S, Rong Q, Ao Y (2020), "Anterior cruciate ligament deficiency combined with lateral and/or medial meniscal injury results in abnormal kinematics and kinetics during level walking", Proc. Inst. Mech. Eng. H, vol. 234, pp. 91-99. [DOI] orthopedicskneegait
2020 Liu Y, Song Q, Li C, Guan X, Ji L (2020), "Quantitative Assessment of Motor Function for Patients with a Stroke by an End-Effector Upper Limb Rehabilitation Robot", Biomed Res. Int., vol. 2020, pp. 5425741. [DOI] upper extremityrehab
2020 Michnik R, ZadoŃ H, Nowakowska-Lipiec K, Jochymczyk-WoŹniak K, MyŚliwiec A, Mitas AW (2020), "The effect of the pelvis position in the sagittal plane on loads in the human musculoskeletal system", Acta Bioeng. Biomech., vol. 22, pp. 33-42. [DOIWWW] trunkspinelower extremitysensitivity analysis
2020 Miyoshi T, Kamada Y, Kobayashi Y (2020), "Differences in Simulated EMG Activities between a Non-Rotational Shot and an Ordinary Instep Kick Identified by Principal Component Analysis", Proc. AMIA Annu. Fall Symp., vol. 49, pp. 154. [DOIWWW] sportslower extremitymethods
2020 Mohamaddan S, Rahman A, Jamali A, Hazmi H, Limbai MM (2020), "Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device", In: Intelligent Manufacturing and Energy Sustainability, pp. 739-748. [DOI] upper extremityrehab
2020 Mundt M, Koeppe A, David S, Witter T, Bamer F, Potthast W, Markert B (2020), "Estimation of Gait Mechanics Based on Simulated and Measured IMU Data Using an Artificial Neural Network", Front Bioeng Biotechnol, vol. 8, pp. 41. [DOI] gait
2020 Mundt M, Thomsen W, Witter T, Koeppe A, David S, Bamer F, Potthast W, Markert B (2020), "Prediction of lower limb joint angles and moments during gait using artificial neural networks", Med. Biol. Eng. Comput., vol. 58, pp. 211-225. [DOI] gait
2020 Nowakowska-Lipiec K, Michnik R, Linek P, Myśliwiec A, Jochymczyk-Woźniak K, Gzik M (2020), "A numerical study to determine the effect of strengthening and weakening of the transversus abdominis muscle on lumbar spine loads", Comput. Methods Biomech. Biomed. Engin., pp. 1-10. [DOI] orthopedicsspinerehab
2020 Obrębska P, Skubich J, Piszczatowski S (2020), "Gender differences in the knee joint loadings during gait", Gait Posture, vol. 79, pp. 195-202. [DOI] kneegait
2020 Peng Y, Wong DW, Wang Y, Chen TL, Tan Q, Chen Z, Jin Z, Zhang M (2020), "Immediate Effects of Medially Posted Insoles on Lower Limb Joint Contact Forces in Adult Acquired Flatfoot: A Pilot Study", Int. J. Environ. Res. Public Health, vol. 17, pp. 2226. [DOI] orthopedicshipkneeanklegait
2020 Peters M, Wischniewski S (2020), "Evaluation of Physical Workload Using Simulation Versus Motion Capturing Data for Biomechanical Models", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11. [DOI] work place ergonomicsmethods
2020 Phillips CW, Forrester AI, Hudson DA, Turnock SR (2020), "Propulsive efficiency of alternative underwater flykick techniques for swimmers", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120912610. [DOI] sports
2020 Qu H, Yu LJ, Wu JT, Liu G, Liu SH, Teng P, Ding L, Zhao Y (2020), "Spine system changes in soldiers after load carriage training in a plateau environment: a prediction model research", Mil Med Res, vol. 7, pp. 63. [DOI] defensespine
2020 Rasmussen J, Lund ME, Waagepetersen RP (2020), "Data-Based Parametric Biomechanical Models for Cyclic Motions", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 372-379. [DOI] methods
2020 Reilly M, Kontson K (2020), "Computational musculoskeletal modeling of compensatory movements in the upper limb", J. Biomech., vol. 108, pp. 109843. [DOI] exoskeletonupper extremityspinerehab
2020 Ruggiero A, D’Amato R, Ungureanu N (2020), "Musculoskeletal multibody simulations for the optimal tribological design of human prostheses: the case of the ankle joint", IOP Conf. Ser.: Mater. Sci. Eng., vol. 749, pp. 012008. [DOIWWW] orthopedicsanklegait
2020 Seiferheld BE, Frost J, Krog M, Skals S, Andersen MS (2020), "BIOMECHANICAL INVESTIGATION OF A PASSIVE UPPER EXTREMITY EXOSKELETON FOR MANUAL MATERIAL HANDLING – A COMPUTATIONAL PARAMETER STUDY", In: 12th Annual Meeting of the Danish Society of Biomechanics..
2020 Shayestehpour H, Shayestehpour MA, Koutras C, Rasmussen J, Wong C (2020), "Preliminary kinetic validation of a thoracolumbar musculoskeletal model using sensitivity analysis", . [WWW] spine
2020 Shigemitsu, R., Sasaki, K., Rasmussen, J. (2020), "Musculoskeletal modeling with jaw motion data from a TMD patient", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 108-114. [DOI] orthopedicsmandible
2020 Sjöberg M (2020), "Biomechanical analyses of flywheel resistance exercise : From a space- and ground-based perspective", Ph.D. Thesis, KTH, Sweden, School of Engineering Sciences in Chemistry, Biotechnology and Health (CBH). [WWW] aerospacesportsspinelower extremity
2020 Smith AJJ, Fournier BN, Nantel J, Lemaire ED (2020), "Estimating upper extremity joint loads of persons with spinal cord injury walking with a lower extremity powered exoskeleton and forearm crutches", J. Biomech., vol. 107, pp. 109835. [DOI] exoskeletonupper extremitylower extremitygait
2020 Sohane A, Agarwal R (2020), "Knee Muscle Force Estimating Model Using Machine Learning Approach", Comput. J.. [DOIWWW] kneemethods
2020 Taira K, Kobayashi Y, Tanaka K (2020), "Evaluation of Operability for a Competition Wheelchair Using Manipulability", Proc. AMIA Annu. Fall Symp., vol. 49, pp. 53. [DOIWWW] sportsupper extremityvalidationrehab
2020 Vychytil J, Havelková L, Čechová H, Zítka T, Melzner M (2020), "Injury prevention during childbirth: The model of obstetrician", Mathematical Modeling, vol. 4, pp. 125-127. work place ergonomicshandspine
2020 Wiggermann N, Zhou J, McGann N (2020), "Effect of Repositioning Aids and Patient Weight on Biomechanical Stresses When Repositioning Patients in Bed", Hum. Factors, pp. 18720819895850. [DOI] work place ergonomicshandspine
2020 Wu R, Wang J, Chen W, Wang P (2020), "Design of a transfer robot for the assistance of elderly and disabled", Adv. Robot., pp. 1-11. [DOI] exoskeletonwork place ergonomicslower extremity
2020 Zhang Q, Chen Z, Zhang Z, Jin Z, Muratoglu OK, Varadarajan KM (2020), "Leveraging subject-specific musculoskeletal modeling to assess effect of anterior cruciate ligament retaining total knee arthroplasty during walking gait", Proc. Inst. Mech. Eng. H, pp. 954411920947204. [DOI] orthopedicskneegait
2020 Zhang Y, Chen Z, Peng Y, Zhao H, Liang X, Jin Z (2020), "Predicting ground reaction and tibiotalar contact forces after total ankle arthroplasty during walking", Proc. Inst. Mech. Eng. H, pp. 954411920947208. [DOI] orthopedicsanklegait
2020 Zhou J, Wiggermann N (2020), "The effects of hospital bed features on physical stresses on caregivers when repositioning patients in bed", Appl. Ergon., vol. 90, pp. 103259. [DOI] work place ergonomicshandupper extremityshoulderspine
2020 Zongxing L, Xiangwen W, Shengxian Y (2020), "The effect of sitting position changes from pedaling rehabilitation on muscle activity", Comput. Methods Biomech. Biomed. Engin., pp. 1-10. [DOI] sportsrehab
2020 亚东 陈 (2020), "Biomechanical Analysis of Knee Joint during the Process of Jumping and Landing", MOS, vol. 09, pp. 77-86. [DOIWWW] knee
2019 Andrzej B, Anna S, Robert M, Miłosz C, Piotr W, Jacek J (2019), "Analysis of Skeletal Muscle System Loads for the Most Optimal Positions During Lifting in Different Load Distances", In: Biomechanics in Medicine and Biology, pp. 221-230. [DOI] work place ergonomicsspine
2019 Ardestani MM, ZhenXian C, Noori-Dokht H, Moazen M, Jin Z (2019), "Computational analysis of knee joint stability following total knee arthroplasty", J. Biomech., vol. 86, pp. 17-26. [DOI] orthopedicskneegait
2019 Ashtiani MN, Azghani M, Shakouri SK (2019), "Biomechanical Modeling of Hip Abduction Exercise Using Optimized Inverse Dynamics", Zahedan J Res Med Sci, vol. In Press. [DOIWWW] hiplower extremityrehab
2019 Baldoni M, Gu W (2019), "Effect of fixed charge density on water content of IVD during bed rest: A numerical analysis", Med. Eng. Phys., vol. 70, pp. 72-77. [DOI] spine
2019 Bassani T, Casaroli G, Galbusera F (2019), "Dependence of lumbar loads on spinopelvic sagittal alignment: An evaluation based on musculoskeletal modeling", PLoS One, vol. 14, pp. e0207997. [DOI] orthopedicsspinehip
2019 Bayoglu R, Galibarov PE, Verdonschot N, Koopman B, Homminga J (2019), "Twente Spine Model: A thorough investigation of the spinal loads in a complete and coherent musculoskeletal model of the human spine", Med. Eng. Phys., vol. 68, pp. 35-45. [DOI] spine
2019 Castro MN, Rasmussen J, Andersen MS, Bai S (2019), "A compact 3-DOF shoulder mechanism constructed with scissors linkages for exoskeleton applications", Mechanism and Machine Theory, vol. 132, pp. 264-278. [DOIWWW] exoskeletonshoulder
2019 Castro MN, Rasmussen J, Bai S, Andersen MS (2019), "Validation of subject-specific musculoskeletal models using the anatomical reachable 3-D workspace", J. Biomech., vol. 90, pp. 92-102. [DOI] upper extremitymethodsvalidation
2019 Castro MN, Rasmussen J, Bai S, Andersen MS (2019), "The reachable 3-D workspace volume is a measure of payload and body-mass-index: A quasi-static kinetic assessment", Appl. Ergon., vol. 75, pp. 108-119. [DOI] exoskeletonwork place ergonomicsupper extremitymethods
2019 Chander DS, Cavatorta MP (2019), "Modelling friction at the mechanical interface between the human and the exoskeleton", International Journal of Human Factors Modelling and Simulation, vol. 7, pp. 119-136. [DOIWWW] exoskeleton
2019 Chen Z, Zhang J, Zhang X, Jin ZM (2019), "Biomechanics and Tribology of Artificial Knee Joint", Book Chapter, In: Fu J, Jin ZM, Wang JW (Ed): UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 191-239. [DOI] orthopedicskneegaitFEA
2019 De Pieri E, Lunn DE, Chapman GJ, Rasmussen KP, Ferguson SJ, Redmond AC (2019), "Patient characteristics affect hip contact forces during gait", Osteoarthritis Cartilage, vol. 27, pp. 895-905. [DOI] orthopedicshiplower extremitygaitvalidation
2019 Dejtiar DL, Dzialo CM, Pedersen PH, Jensen KK, Fleron M, Andersen MS (2019), "Development and evaluation of a subject-specific lower limb model with an 11 DOF natural knee model using MRI and EOS during a quasi-static lunge", J. Biomech. Eng.. [DOI] knee
2019 Dupré T, Dietzsch M, Komnik I, Potthast W, David S (2019), "Agreement of measured and calculated muscle activity during highly dynamic movements modelled with a spherical knee joint", J. Biomech., vol. 84, pp. 73-80. [DOI] lower extremitykneegaitvalidation
2019 Dzialo CM, Mannisi M, Halonen KS, de Zee M, Woodburn J, Andersen MS (2019), "Gait alteration strategies for knee osteoarthritis: a comparison of joint loading via generic and patient-specific musculoskeletal model scaling techniques", International Biomechanics, vol. 6, pp. 54-65. [DOI] orthopedicskneegait
2019 Dzialo CM, Pedersen PH, Jensen KK, de Zee M, Andersen MS (2019), "Evaluation of predicted patellofemoral joint kinematics with a moving-axis joint model", Med. Eng. Phys., vol. 73, pp. 85-91. [DOI] kneevalidation
2019 Flores-Hernandez C, Eskinazi I, Hoenecke HR, D'Lima DD (2019), "Scapulothoracic rhythm affects glenohumeral joint force", JSES Open Access, vol. 3, pp. 77-82. [DOI] shouldervalidationsensitivity analysis
2019 Gao Y, Jin ZM (2019), "Biomechanics and Biotribology of UHMWPE Artificial Hip Joints", Book Chapter, In: Fu J, Jin ZM, Wang JW (Ed): UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 241-286. [DOI] orthopedicshipgaitFEA
2019 Guan X, Kuai S, Song L, Liu W, Liu Y, Ji L, Wang R (2019), "Effects of Ankle Joint Motion on Pelvis-Hip Biomechanics and Muscle Activity Patterns of Healthy Individuals in Knee Immobilization Gait", J. Healthc. Eng., vol. 2019, pp. 3812407. [DOI] exoskeletongaitrehab
2019 Harthikote Nagaraja V (2019), "Motion capture and musculoskeletal simulation tools to measure prosthetic arm functionality", Ph.D. Thesis, University of Oxford. [WWW] orthopedicsexoskeletonhandwristupper extremityshouldertrunkelbowmethodsvalidationsensitivity analysisrehab
2019 Hazrati E, Azghani M (2019), "Saddle place effect on the leg joints range of motion and muscles contraction velocity in ergometer: parametric study", Modares Mechanical Engineering, vol. 18, pp. 91-99. [WWW] sportslower extremityrehab
2019 Heinen F, S Rensen SR, King M, Lewis M, Lund ME, Rasmussen J, de Zee M (2019), "Muscle-tendon unit parameter estimation of a Hill-type musculoskeletal model based on experimentally obtained subject-specific torque profiles", J. Biomech. Eng.. [DOI] lower extremitymethods
2019 Higuchi R, Komatsu A, Iida J, Iwami T, Shimada Y (2019), "Construction and validation under dynamic conditions of a novel thoracolumbar spine model with defined muscle paths using the wrapping method", Journal of Biomechanical Science and Engineering, vol. 14, pp. 18-00432-18-00432. [DOI] spinemethods
2019 Hu J, Xin H, Chen Z, Zhang Q, Peng Y, Jin Z (2019), "The role of menisci in knee contact mechanics and secondary kinematics during human walking", Clin. Biomech. , vol. 61, pp. 58-63. [DOI] orthopedicskneegait
2019 Huang H, Yin W, Ren S, Yu Y, Zhang S, Rong Q, Ao Y (2019), "Muscular Force Patterns during Level Walking in ACL-Deficient Patients with a Concomitant Medial Meniscus Tear", Appl. Bionics Biomech., vol. 2019, pp. 7921785. [DOI] orthopedicskneegait
2019 Ignasiak D (2019), "A novel method for prediction of postoperative global sagittal alignment based on full-body musculoskeletal modeling and posture optimization", J. Biomech., pp. 109324. [DOI] orthopedicsspinemethodsvalidation
2019 Iida J, Miyakoshi N, Hongo M, Iwami T, Iwami T, Higuchi R, Komatsu A, Matsunaga T, Shimada Y (2019), "Calculation of Intervertebral Disc Pressure in the Thoracic and Lumbar Spine in Elderly Women with Kyphosis Using a Novel Musculoskeletal Model with Isolated Thoracic Vertebrae and Rib Cage", OJO, vol. 09, pp. 241-253. [DOIWWW] orthopedicsspine
2019 Iwasaki K, Okuya G, Nishisako Y, Chijiwa N, Arizono H, Wada C (2019), "Evaluation of Upper Limb Muscle Load in Lower-Limb Amputees during Ladder Climbing", International Journal of New Technology and Research, vol. 5. [DOIWWW] sportsupper extremityvalidation
2019 Jiang C, Xiang Z, Zhao Z, Yang Y (2019), "The Design of an Adjustable Rehabilitation Bed based on Human Biomechanics", In: Advances in Mechanism and Machine Science, pp. 143-153. [DOI] rehab
2019 Kang KT, Koh YG, Nam JH, Jung M, Kim SJ, Kim SH (2019), "Biomechanical evaluation of the influence of posterolateral corner structures on cruciate ligaments forces during simulated gait and squatting", PLoS One, vol. 14, pp. e0214496. [DOI] kneegaitvalidation
2019 Kang KT, Koh YG, Park KM, Choi CH, Jung M, Shin J, Kim SH (2019), "The anterolateral ligament is a secondary stabilizer in the knee joint", Bone Joint Res., vol. 8, pp. 509–517. [DOIWWW] orthopedicskneegaitvalidation
2019 Karatsidis A, Jung M, Schepers HM, Bellusci G, de Zee M, Veltink PH, Andersen MS (2019), "Musculoskeletal model-based inverse dynamic analysis under ambulatory conditions using inertial motion capture", Med. Eng. Phys., vol. 65, pp. 68-77. [DOI] gaitmethods
2019 Kim Y, Kim J, Lee KM, Koo S (2019), "The increase of joint contact forces in foot joints with simulated subtalar fusion in healthy subjects", Gait Posture, vol. 74, pp. 27-32. [DOI] orthopedicsfoot
2019 Konrath JM, Karatsidis A, Schepers HM, Bellusci G, de Zee M, Andersen MS (2019), "Estimation of the Knee Adduction Moment and Joint Contact Force during Daily Living Activities Using Inertial Motion Capture", Sensors , vol. 19. [DOI] orthopedicsknee
2019 Kuai S, Guan X, Liu W, Ji R, Xiong J, Wang D, Zhou W (2019), "Prediction of the Spinal Musculoskeletal Loadings during Level Walking and Stair Climbing after Two Types of Simulated Interventions in Patients with Lumbar Disc Herniation", J. Healthc. Eng., vol. 2019, pp. 6406813. [DOI] orthopedicsspinegait
2019 Liu T, Khalaf K, Adeeb S, El-Rich M (2019), "Numerical Investigation of Intra-abdominal Pressure Effects on Spinal Loads and Load-Sharing in Forward Flexion", Front Bioeng Biotechnol, vol. 7, pp. 428. [DOI] spineFEAvalidation
2019 Liu T, Khalaf K, Adeeb S, El-Rich M (2019), "Effects of lumbo-pelvic rhythm on trunk muscle forces and disc loads during forward flexion: A combined musculoskeletal and finite element simulation study", J. Biomech., vol. 82, pp. 116-123. [DOI] spineFEA
2019 Lund M, Rasmussen J, Andersen M (2019), "AnyPyTools: A Python package for reproducible research with the AnyBody Modeling System", JOSS, vol. 4, pp. 1108. [DOIWWW] methods
2019 Lunn DE, De Pieri E, Chapman GJ, Lund ME, Redmond AC, Ferguson SJ (2019), "Current Preclinical Testing of New Hip Arthroplasty Technologies Does Not Reflect Real-World Loadings: Capturing Patient-Specific and Activity-Related Variation in Hip Contact Forces", J. Arthroplasty, vol. 0. [DOI] orthopedicshiplower extremitygait
2019 Mannisi M, Dell'Isola A, Andersen MS, Woodburn J (2019), "Effect of lateral wedged insoles on the knee internal contact forces in medial knee osteoarthritis", Gait Posture, vol. 68, pp. 443-448. [DOI] orthopedicskneegait
2019 Moore CW (2019), "Development of a Task Analysis Tool to Estimate Shoulder Strain During a Lifting Task", Ph.D. Thesis, West Virginia University. [DOIWWW] work place ergonomicsshouldervalidation
2019 Nakashima M, Kanie R, Shimana T, Matsuda Y, Kubo Y (2019), "Development of a comprehensive method for musculoskeletal simulation in swimming using motion capture data", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337119838395. [DOI] sports
2019 Oomen P (2019), "Simulating gait in patients with knee osteoarthritis", Thesis, Universiteit Maastricht, The Netherlands. [WWW] lower extremitykneegaitmethods
2019 Rasmussen J (2019), "Chapter 8 - The AnyBody Modeling System", Book Chapter, In: Scataglini S, Paul G (Ed): DHM and Posturography, pp. 85-96. [DOIWWW] methods
2019 Rasmussen J (2019), "Predictive Models in Biomechanics", In: Biomechanics in Medicine and Biology, pp. 98-106. [DOI] sportsmethods
2019 Rodrigues C, Correia M, Abrantes J, Nadal J, Benedetti M (2019), "Combined Phase and Magnitude Metric for Validation of Lower Limb Multibody Dynamics Muscle Action with sEMG", In: World Congress on Medical Physics and Biomedical Engineering 2018, pp. 517-521. [DOI] lower extremityvalidation
2019 Sakamoto TC (2019), "Effect of age-related muscle weakness and height on L5/S1 compression force during manual material handling", In: Transactions of the JSME (in Japanese), pp. 19-00125-19-00125. [DOI] spine
2019 Simonsen MB, Yurtsever A, Næsborg-Andersen K, Leutscher PDC, Hørslev-Petersen K, Andersen MS, Hirata RP (2019), "Tibialis posterior muscle pain effects on hip, knee and ankle gait mechanics", Hum. Mov. Sci., vol. 66, pp. 98-108. [DOI] orthopedicshipkneeanklegait
2019 Simonsen MB, Yurtsever A, Næsborg-Andersen K, Leutscher PDC, Hørslev-Petersen K, Hirata RP, Andersen MS (2019), "A parametric study of effect of experimental tibialis posterior muscle pain on joint loading and muscle forces-Implications for patients with rheumatoid arthritis?", Gait Posture, vol. 72, pp. 102-108. [DOI] lower extremityanklefootgait
2019 Skendraoui N, Bogard F, Murer S, Ahram TZ, Fiok K, Taiar R (2019), "The Musculoskeletal Contribution in Wheelchair Propulsion Systems: Numerical Analysis", In: Advances in Ergonomics in Design, pp. 251-260. [DOI] upper extremityshoulderrehab
2019 Skubich J, Piszczatowski S (2019), "Model of loadings acting on the femoral bone during gait", J. Biomech., vol. 87, pp. 54-63. [DOI] orthopedicslower extremitygait
2019 Spada S, Ghibaudo L, Carnazzo C, Di Pardo M, Chander DS, Gastaldi L, Cavatorta MP (2019), "Physical and Virtual Assessment of a Passive Exoskeleton", In: Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 247-257. [DOI] exoskeletonwork place ergonomicslower extremityvalidation
2019 Taira K, Kobayashi Y, Tanaka K (2019), "Influences of design parameters of a competition wheelchair on muscle activity based on measured operation", Abstr. ATEM Int. Conf. Adv. Technol. Exp. Mech. Asian Conf. Exp. Mech., vol. 2019, pp. 1008D0945. [DOIWWW] sportswristshoulderelbowrehab
2019 Theodorakos I, Savonnet L, Beurier G, Wang X (2019), "Can Computationally Predicted Internal Loads Be Used to Assess Sitting Discomfort? Preliminary Results", In: Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 447-456. [DOI] furniturespineseating
2019 Theodorakos I, Wang X (2019), "Evaluation of a modelling workflow to obtain subject specific spine geometry for sitting postures", IJHFMS, vol. 7, pp. 87. [DOIWWW] spinemethods
2019 Wang H, Sun Y, Tian Y (2019), "Mechanical Structure Design and Robust Adaptive Integral Backstepping Cooperative Control of a New Lower Back Exoskeleton", STUD INFORM CONTROL, vol. 28. [DOIWWW] exoskeletonrehab
2019 Wu JZ, Sinsel EW, Carey RE, Zheng L, Warren CM, Breloff SP (2019), "Biomechanical modeling of deep squatting: Effects of the interface contact between posterior thigh and shank", J. Biomech., vol. 96, pp. 109333. [DOI] work place ergonomicsknee
2019 Xu C, Reifman J, Baggaley M, Edwards WB, Unnikrishnan G (2019), "Individual differences in women during walking affect tibial response to load carriage: The importance of individualized musculoskeletal finite-element models", IEEE Trans. Biomed. Eng.. [DOI] defenselower extremitygaitFEA
2019 Xu J, Li Y, Xu L, Peng C, Chen S, Liu J, Xu C, Cheng G, Xu H, Liu Y, Chen J (2019), "A Multi-Mode Rehabilitation Robot With Magnetorheological Actuators Based on Human Motion Intention Estimation", IEEE Trans. Neural Syst. Rehabil. Eng., vol. 27, pp. 2216-2228. [DOI] exoskeletonlower extremityrehab
2019 Xunjian F, Zhenxian C, Zhuo C, Zhihui X, Zhongmin J (2019), "Combined Musculoskeletal Multi-Body Dynamics and Finite Element Investigation for Customized Scapular Locking Plate (in Chinese)", J. Xi'an Jiaotong Univ./Xi'an Jiaotong Daxue Xuebao, vol. 53, pp. 168-176. [DOI] orthopedicsshoulderFEA
2019 Yoshito Otake, Yuta Hiasa, Masaki Takao, Nobuhiko Sugano, Yoshinobu Sato (2019), "Analysis of Large Scale CT Image Database using AI for Understanding of Musculoskeletal Anatomy and Application in Computer Assisted Surgery", In: Medical Imaging Technology. methods
2019 Zadoń H, Michnik R, Nowakowska K, Myśliwiec A (2019), "Assessment of Loads Exerted on the Lumbar Segment of the Vertebral Column in Everyday-Life Activities – Application of Methods of Mathematical Modelling", In: Information Technology in Biomedicine, pp. 554-565. [DOI] work place ergonomicsspine
2019 Zhang Y, Chen Z, Zhao H, Liang X, Sun C, Jin Z (2019), "Musculoskeletal modeling of total ankle arthroplasty using force-dependent kinematics for predicting in vivo joint mechanics", Proc. Inst. Mech. Eng. H, pp. 954411919890724. [DOI] orthopedicsanklegait
2019 Zhou* J, Wiggermann N (2019), "Physical Stresses on Caregivers when Pulling Patients Up in Bed: Effect of Repositioning Aids and Patient Weight", Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 63, pp. 1057-1061. [DOI] work place ergonomics
2018 Alamdari A, Jun S, Ramsey D, Krovi V (2018), "A REVIEW OF HOME-BASED ROBOTIC REHABILITATION", Book Chapter, In: The Encyclopedia of Medical Robotics, pp. 187-215. [DOI] rehab
2018 Andersen MS (2018), "How sensitive are predicted muscle and knee contact forces to normalization factors and polynomial order in the muscle recruitment criterion formulation?", International Biomechanics, vol. 5, pp. 88-103. [DOI] kneesensitivity analysis
2018 Arshad R, Angelini L, Zander T, Di Puccio F, El-Rich M, Schmidt H (2018), "Spinal loads and trunk muscles forces during level walking - A combined in vivo and in silico study on six subjects", J. Biomech., vol. 70, pp. 113-123. [DOI] spinegait
2018 Bardin A, Wang J, Rogers CW, Colborne GR (2018), "A PRELIMINARY ANYBODY MODEL OF THE EQUINE FORELIMB FOR MOTION SIMULATIONS", International Conference on Equine Exercise Physiology (ICEEP) X, Lorne, Australia. animal
2018 Behjati M, Arjmand N (2018), "Biomechanical Assessment of the NIOSH Lifting Equation in Asymmetric Load-Handling Activities Using a Detailed Musculoskeletal Model", Hum. Factors, vol. 61, pp. 18720818795038. [DOI] work place ergonomicsspine
2018 Benditz A, Auer S, Spörrer JF, Wolkerstorfer S, Grifka J, Suess F, Dendorfer S (2018), "Regarding loads after spinal fusion, every level should be seen separately: a musculoskeletal analysis", Eur. Spine J., vol. 27, pp. 1905-1910. [DOI] orthopedicsspine
2018 Bitter T (2018), "A finite element approach for wear prediction at the taper junction in modular total hip arthroplasty", Ph.D. Thesis, [Sl: sn]. orthopedicshipgaitFEA
2018 Chander DS, Cavatorta MP (2018), "Multi-directional one-handed strength assessments using AnyBody Modeling Systems", Appl. Ergon., vol. 67, pp. 225-236. [DOI] upper extremityvalidation
2018 Chen Z, Gao Y, Chen S, Zhang Q, Zhang Z, Zhang J, Zhang X, Jin Z (2018), "Biomechanics and wear comparison between mechanical and kinematic alignments in total knee arthroplasty", Proc. Inst. Mech. Eng. H, pp. 954411918811855. [DOI] orthopedicskneegait
2018 Chowdhury SK, Nimbarte AD, Hsiao H, Gopalakrishnan B, Jaridi M (2018), "A biomechanical shoulder strain index based on stabilizing demand of shoulder joint", Ergonomics, vol. 61, pp. 1657-1670. [DOI] work place ergonomicsshouldermethods
2018 David S, Mundt M, Komnik I, Potthast W (2018), "Understanding cutting maneuvers - The mechanical consequence of preparatory strategies and foot strike pattern", Hum. Mov. Sci., vol. 62, pp. 202-210. [DOI] sports
2018 De Pieri E, Lund ME, Gopalakrishnan A, Rasmussen KP, Lunn DE, Ferguson SJ (2018), "Refining muscle geometry and wrapping in the TLEM 2 model for improved hip contact force prediction", PLoS One, vol. 13, pp. e0204109. [DOI] hiplower extremitymethods
2018 Diao H, Xin H, Jin Z (2018), "Prediction of in vivo lower cervical spinal loading using musculoskeletal multi-body dynamics model during the head flexion/extension, lateral bending and axial rotation", Proc. Inst. Mech. Eng. H, vol. 232, pp. 1071-1082. [DOI] spinevalidation
2018 Dupré T, Funken J, Müller R, Mortensen KRL, Lysdal FG, Braun M, Krahl H, Potthast W (2018), "Does inside passing contribute to the high incidence of groin injuries in soccer? A biomechanical analysis", J. Sports Sci., vol. 36, pp. 1827-1835. [DOI] sports
2018 Dzialo CM (2018), "Personalized musculoskeletal modeling: Bone morphing, knee joint modeling, and applications", Ph.D. Thesis, Aalborg University. [DOI] orthopedicskneegait
2018 Dzialo CM, Pedersen PH, Simonsen CW, Jensen KK, de Zee M, Andersen MS (2018), "Development and validation of a subject-specific moving-axis tibiofemoral joint model using MRI and EOS imaging during a quasi-static lunge", J. Biomech., vol. 72, pp. 71-80. [DOI] orthopedicskneemethods
2018 Fischer MCM, Eschweiler J, Schick F, Asseln M, Damm P, Radermacher K (2018), "Patient-specific musculoskeletal modeling of the hip joint for preoperative planning of total hip arthroplasty: A validation study based on in vivo measurements", PLoS One, vol. 13, pp. e0195376. [DOI] orthopedicshipgaitvalidation
2018 Fournier B (2018), "Model and Characterization of a Passive Biomimetic Ankle for Lower Extremity Powered Exoskeleton", . [DOI] exoskeletonlower extremityanklegaitrehab
2018 Fournier BN, Lemaire ED, Smith AJJ, Doumit M (2018), "Modeling and Simulation of a Lower Extremity Powered Exoskeleton", IEEE Trans. Neural Syst. Rehabil. Eng., vol. 26, pp. 1596-1603. [DOI] exoskeletonspinelower extremitygait
2018 Gross S, Verkerke GJ, Dendorfer S (2018), "Combined experimental and numerical approach to investigate changes in muscle recruitment pattern of the back muscles during exhausting exercise", In: World Congress Biomechanics Dublin, 2018. [WWW] methods
2018 Haberer C, David S, Weiss S, Potthast W, Komnik I, Funken J (2018), "Data from: Compromised knee internal rotation in total knee arthroplasty patients during stair climbing", . [DOI] orthopedicskneegait
2018 Hu J, Chen Z, Xin H, Zhang Q, Jin Z (2018), "Musculoskeletal multibody dynamics simulation of the contact mechanics and kinematics of a natural knee joint during a walking cycle", Proc. Inst. Mech. Eng. H, vol. 232, pp. 508-519. [DOI] kneegaitFEA
2018 Ignasiak D, Peteler T, Fekete TF, Haschtmann D, Ferguson SJ (2018), "The influence of spinal fusion length on proximal junction biomechanics: a parametric computational study", Eur. Spine J., vol. 27, pp. 2262-2271. [DOI] orthopedicsspine
2018 Ignasiak D, Rüeger A, Sperr R, Ferguson SJ (2018), "Thoracolumbar spine loading associated with kinematics of the young and the elderly during activities of daily living", J. Biomech., vol. 70, pp. 175-184. [DOI] orthopedicsspine
2018 Ignasiak D, Valenzuela W, Reyes M, Ferguson SJ (2018), "The effect of muscle ageing and sarcopenia on spinal segmental loads", Eur. Spine J., vol. 27, pp. 2650-2659. [DOI] spine
2018 Jeang A, Chiang AJ, Chiang PC, Chiang PS, Tung PY (2018), "Robust parameters determination for ergonomical product design via computer musculoskeletal modeling and multi-objective optimization", Comput. Ind. Eng., vol. 118, pp. 180-201. [DOIWWW] sportslower extremitymethods
2018 Jensen EF, Raunsbæk J, Lund JN, Rahman T, Rasmussen J, Castro MN (2018), "Development and simulation of a passive upper extremity orthosis for amyoplasia", J Rehabil Assist Technol Eng, vol. 5, pp. 2055668318761525. [DOI] exoskeletonupper extremityshoulderrehab
2018 Jeong Y, Chun HJ (2018), "The Biomechanical Effects on the Spine during Gait Using Inverse Dynamics", In: Proceedings of the 4th World Congress on Electrical Engineering and Computer Systems and Science. [DOIWWW] spinegaitvalidation
2018 Kang KT, Koh YG, Son J, Jung M, Oh S, Kim SJ, Kim SH (2018), "Biomechanical influence of deficient posterolateral corner structures on knee joint kinematics: A computational study", J. Orthop. Res.. [DOI] orthopedicskneegaitvalidation
2018 Karatsidis A, Jung M, Martin Schepers H, Bellusci G, de Zee M, Veltink PH, Andersen MS (2018), "Predicting kinetics using musculoskeletal modeling and inertial motion capture", . [WWW] lower extremitygaitmethods
2018 Kathawala KJ (2018), "Effects of Slips and Trips on Resultant Lumbar Kinematics, Lumbar Muscle Activity and Low-Back Loads", Thesis, Rochester Institute of Technology. [WWW] spinegait
2018 Kim Y, Jung Y, Choi W, Lee K, Koo S (2018), "Similarities and differences between musculoskeletal simulations of OpenSim and AnyBody modeling system", J. Mech. Sci. Technol., vol. 32, pp. 6037-6044. [DOI] lower extremitymethods
2018 Kim Y, Lee KM, Koo S (2018), "Joint moments and contact forces in the foot during walking", J. Biomech., vol. 74, pp. 79-85. [DOI] footgait
2018 Kobayashi Y, Tanaka K (2018), "Evaluation of a Competition Wheelchair Based on Estimation of Muscle Activity for Forward Linear Operation by Using Inverse Dynamics Analysis", Proc. AMIA Annu. Fall Symp., vol. 2, pp. 259. [DOIWWW] sportsupper extremityshoulderrehab
2018 Konya MN, Aslan A, Bakbak S (2018), "How is hip prosthesis and proximal femoral nail stability affected by lesser trochanter fractures: A comparative finite element analysis", Eklem Hastalik. Cerrahisi, vol. 29, pp. 79-86. [DOI] orthopedicshipFEA
2018 Kuai S, Guan X, Zhou W, Zhang R, Ji R, Liao Z, Guo D, Liu W, Wang D (2018), "Continuous lumbar spine rhythms during level walking, stair climbing and trunk flexion in people with and without lumbar disc herniation", Gait Posture, vol. 63, pp. 296-301. [DOI] orthopedicsspinegait
2018 Leijendekkers RA, Marra MA, Kolk S, van Bon G, Schreurs BW, Weerdesteyn V, Verdonschot N (2018), "Gait symmetry and hip strength in women with developmental dysplasia following hip arthroplasty compared to healthy subjects: A cross-sectional study", PLoS One, vol. 13, pp. e0193487. [DOI] orthopedicshipgait
2018 Liu T, Khalaf K, Naserkhaki S, El-Rich M (2018), "Load-sharing in the lumbosacral spine in neutral standing & flexed postures - A combined finite element and inverse static study", J. Biomech., vol. 70, pp. 43-50. [DOI] spineFEA
2018 Lund Ohlsson M, Danvind J, Holmberg LJ (2018), "Shoulder and Lower Back Joint Reaction Forces in Seated Double Poling", J. Appl. Biomech., vol. 34, pp. 369-376. [DOI] sportsshoulderspine
2018 M. Tröster, U. Scheneider, T. Bauernhansl, J. Rasmussen, M.S. Andersen (2018), "Simulation Framework for Active Upper Limb Exoskeleton", In: RW (Ed): Dritte Transdisziplinäre Konferenz "Technisce Unterstützungssysteme, die die Menschen wirklich wollen" 2018, pp. 345-354. exoskeletonupper extremity
2018 Marra MA, Heskamp L, Mul K, Lassche S, van Engelen BGM, Heerschap A, Verdonschot N (2018), "Specific muscle strength is reduced in facioscapulohumeral dystrophy: An MRI based musculoskeletal analysis", Neuromuscul. Disord., vol. 28, pp. 238-245. [DOI] upper extremityshouldermandible
2018 Marra MA, Strzelczak M, Heesterbeek PJC, van de Groes SAW, Janssen D, Koopman BFJM, Verdonschot N, Wymenga AB (2018), "Flexing and downsizing the femoral component is not detrimental to patellofemoral biomechanics in posterior-referencing cruciate-retaining total knee arthroplasty", Knee Surg. Sports Traumatol. Arthrosc., vol. 26, pp. 3377-3385. [DOI] orthopedicsknee
2018 Mundt M, Koeppe A, Bamer F, Potthast W, Markert B (2018), "[No title]", . [WWW] sportsmethods
2018 Mundt M, Koeppe A, Bamer F, Potthast W, Markert B (2018), "[No title]", . [WWW] gaitmethods
2018 Niu K, Anijs T, Sluiter V, Homminga J, Sprengers A, Marra MA, Verdonschot N (2018), "In situ comparison of A-mode ultrasound tracking system and skin-mounted markers for measuring kinematics of the lower extremity", J. Biomech., vol. 72, pp. 134-143. [DOI] lower extremitykneemethods
2018 Niu W, Wang L, Jiang C, Zhang M (2018), "Effect of Dropping Height on the Forces of Lower Extremity Joints and Muscles during Landing: A Musculoskeletal Modeling", J. Healthc. Eng., vol. 2018, pp. 2632603. [DOI] hiplower extremitykneeankle
2018 Oefner C, Kruber D, Rickert C, Voigt C, Schoenfelder S, Hierl T (2018), "Osteosynthese des Unterkiefergelenkhalses – eine vergleichende biomechanische Analyse der Festigkeit von vier Versorgungssystemen", 36. CADFEM ANSYS Simulation Conference, 10-12 Oct. 2018, Leipzig, Germany. [WWW] orthopedicsmandibleFEA
2018 Peng Y, Zhang Z, Gao Y, Chen Z, Xin H, Zhang Q, Fan X, Jin Z (2018), "Concurrent prediction of ground reaction forces and moments and tibiofemoral contact forces during walking using musculoskeletal modelling", Med. Eng. Phys., vol. 52, pp. 31-40. [DOI] orthopedicskneemethods
2018 Reilly M, Kontson K (2018), "Computational musculoskeletal modeling of compensatory movements in the upper limb", RESNA 2018 Annual Conference, Arlington, VA, USA July 11-15, 2018. upper extremityspinerehab
2018 Richards RE, Andersen MS, Harlaar J, van den Noort JC (2018), "Relationship between knee joint contact forces and external knee joint moments in patients with medial knee osteoarthritis: effects of gait modifications", Osteoarthritis Cartilage, vol. 26, pp. 1203-1214. [DOI] orthopedicskneegaitvalidation
2018 Richards RE, Andersen MS, Harlaar J, van den Noort JC (2018), "Relationship between knee joint contact forces and external knee joint moments in patients with medial knee osteoarthritis: effects of gait modifications", Osteoarthritis Cartilage, vol. 26, pp. 1203-1214. [DOI] orthopedicskneegait
2018 Ro J, Kim C, Kim JS, Yoo OS (2018), "CONTACT MECHANICS AND MUSCLE STABILITY OF TOTAL KNEE ARTHROPLASTY DURING SQUATTING AND WALKING: A SIMULATION STUDY", Orthopaedic Proceedings, vol. 99-B, pp. 118-118. [WWW] orthopedicskneegait
2018 Ruggiero A, Merola M, Affatato S (2018), "Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking", Materials , vol. 11. [DOI] orthopedicshipgaitFEA
2018 Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M (2018), "Tennis Elbow: Comparison of One- Handed Backhand Stroke Form", SM Orthop Musc Syst., vol. 2, pp. 1002. [WWW] orthopedicssportselbow
2018 Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M (2018), "Analysis of Forearm Muscle Activity Aiming at Prevention of Refractory Tennis Elbow", M Orthop Musc Syst., vol. 2, pp. 1002. orthopedicssports
2018 Schmitz P, Cornelius Neumann C, Neumann C, Nerlich M, Dendorfer S (2018), "Biomechanical analysis of iliac crest loading following cortico-cancellous bone harvesting", J. Orthop. Surg. Res., vol. 13, pp. 108. [DOI] orthopedicsFEA
2018 Stensgaard Stoltze J, Rasmussen J, Skipper Andersen M (2018), "On the biomechanical relationship between applied hip, knee and ankle joint moments and the internal knee compressive forces", International Biomechanics, vol. 5, pp. 63-74. [DOI] orthopedicskneegait
2018 Theodorakos I, Rueterbories J, Lund ME, Eils E, Andersen MS, De Zee M, Kersting UG (2018), "Effects of a semi-rigid ankle brace on ankle joint loading during landing on inclined surfaces", International Biomechanics, vol. 5, pp. 46-56. [DOI] exoskeletonankle
2018 Tröster M, Schneider U, Bauernhansl T, Rasmussen J, Andersen MS (2018), "Simulation Framework for Active Upper Limb Exoskeleton Design Optimization Based on Musculoskeletal Modeling", In: Smart ASSIST, pp. 345-353. exoskeletonupper extremity
2018 Wolf A, Wartzack S (2018), "PARAMETRIC MOVEMENT SYNTHESIS: TOWARDS VIRTUAL OPTIMISATION OF MAN-MACHINE INTERACTION IN ENGINEERING DESIGN", In: Proceedings of the DESIGN 2018 15th International Design Conference, pp. 941-952. [DOIWWW] methods
2018 ZeYu Huang YN, Xu B, Shen B, Kraus VB, Pei F (2018), "Evidence and mechanism by which upper partial fibulectomy improves knee biomechanics and decreases knee pain of osteoarthritis", J. Orthop. Res.. [DOI] orthopedicskneegait
2018 Zoltan FA, Veronica A, Inocenţiu M, Silviu BI, Mikloş KR, Cerasela PD, Stanciu BS (2018), "Biomechanical Simulation of Different Postures Obtained from Three Sport Branches", In: 2018 IEEE 16th International Symposium on Intelligent Systems and Informatics (SISY), pp. 000305-000310. [DOI] sports
2018 智久 加藤, 隆直 藤井, 求 中島, 弘恭 金髙, 紳一 出江 (2018), "手すりを用いた高齢者起立動作の筋骨格シミュレーション解析", バイオエンジニアリング講演会講演論文集, vol. 2018.30, pp. 2D16. [DOI] rehab
2017 Angelini L, Damm P, Zander T, Arshad R, Di Puccio F, Schmidt H (2017), "Effect of arm swinging on lumbar spine and hip joint forces", J. Biomech.. [DOI] spinehipkneegait
2017 Arshad R, Zander T, Bashkuev M, Schmidt H (2017), "Influence of spinal disc translational stiffness on the lumbar spinal loads, ligament forces and trunk muscle forces during upper body inclination", Med. Eng. Phys., vol. 46, pp. 54-62. [DOI]
2017 Atici H, Gonen D, Oral A, Kaya B (2017), "Ergonomic Analysis of an Assembly Line Using the AnyBody Modeling System", International Conference of Management and Industrial Engineering. [WWW] work place ergonomicsshoulderspine
2017 Bajelan S, Nagano H, Sparrow T, Begg RK (2017), "Effects of wide step walking on swing phase hip muscle forces and spatio-temporal gait parameters", In: 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 954-957. [DOI] lower extremitygait
2017 Bassani T, Ottardi C, Costa F, Brayda-Bruno M, Wilke HJ, Galbusera F (2017), "Semiautomated 3D Spine Reconstruction from Biplanar Radiographic Images: Prediction of Intervertebral Loading in Scoliotic Subjects", Front Bioeng Biotechnol, vol. 5, pp. 1. [DOI] spine
2017 Bassani T, Stucovitz E, Qian Z, Briguglio M, Galbusera F (2017), "Validation of the AnyBody full body musculoskeletal model in computing lumbar spine loads at L4L5 level", J. Biomech., vol. 58, pp. 89-96. [DOI] spinevalidation
2017 Bayoglu R, Geeraedts L, Groenen KH, Verdonschot N, Koopman B, Homminga J (2017), "Twente spine model: A complete and coherent dataset for musculo-skeletal modeling of the lumbar region of the human spine", J. Biomech., vol. 53, pp. 111-119. [DOI] spine
2017 David S, Komnik I, Peters M, Funken J, Potthast W (2017), "Identification and risk estimation of movement strategies during cutting maneuvers", J. Sci. Med. Sport. [DOI] orthopedicssportsknee
2017 Dell'Isola A, Smith SL, Andersen MS, Steultjens M (2017), "Knee internal contact force in a varus malaligned phenotype in knee osteoarthritis (KOA)", Osteoarthritis Cartilage, vol. 25, pp. 2007-2013. [DOI] orthopedicskneegait
2017 Eltoukhy M, Kuenze C, Andersen MS, Oh J, Signorile J (2017), "Prediction of ground reaction forces for Parkinson's disease patients using a kinect-driven musculoskeletal gait analysis model", Med. Eng. Phys., vol. 50, pp. 75-82. [DOI] gaitmethods
2017 Farahmand F, Hosseini SH, Seifi MM (2017), "Analysis of quadriceps muscles force and activity of a 3-Dimensional musculoskeletal model", Journal of Advanced Sport Technology, vol. 1, pp. 7-15. lower extremity
2017 Fournier B, Smith AJ, Doumit M, Lemaire ED (2017), "MODELLING AND SIMULATION OF LOWER EXTREMITY POWERED EXOSKELETON", In: RESNA 2017 - Rehabilitation Engineering and Assistive Technology Society of North America annual conference, June 26-30, 2017, New Orleans, LA. exoskeletonlower extremitygait
2017 Garijo N, Verdonschot N, Engelborghs K, García-Aznar JM, Pérez MA (2017), "Subject-specific musculoskeletal loading of the tibia: Computational load estimation", J. Mech. Behav. Biomed. Mater., vol. 65, pp. 334-343. [DOI] lower extremitygaitmethodsFEA
2017 Halonen KS, Dzialo CM, Mannisi M, Venäläinen MS, de Zee M, Andersen MS (2017), "Workflow assessing the effect of gait alterations on stresses in the medial tibial cartilage - combined musculoskeletal modelling and finite element analysis", Sci. Rep., vol. 7, pp. 17396. [DOI] orthopedicskneegaitmethodsFEA
2017 Hejazi S, Rouhi G, Rasmussen J (2017), "The effects of gastrocnemius-soleus muscle forces on ankle biomechanics during triple arthrodesis", Comput. Methods Biomech. Biomed. Engin., vol. 20, pp. 130-141. [DOI] orthopedicsanklegaitFEAvalidation
2017 Inose H, Mohri S, Arakawa H, Okui M, Koide K, Yamada Y, Kikutani I, Nakamura T (2017), "Semi-endoskeleton-type waist assist AB-wear suit equipped with compressive force reduction mechanism", In: 2017 IEEE International Conference on Robotics and Automation (ICRA), pp. 6014-6019. [DOI] exoskeletonwork place ergonomicsspine
2017 Jung Y, Koo YJ, Koo S (2017), "Simultaneous estimation of ground reaction force and knee contact force during walking and squatting", International Journal of Precision Engineering and Manufacturing, vol. 18, pp. 1263-1268. [DOI] orthopedicskneegaitvalidation
2017 Kang KT, Koh YG, Jung M, Nam JH, Son J, Lee YH, Kim SJ, Kim SH (2017), "The effects of posterior cruciate ligament deficiency on posterolateral corner structures under gait- and squat-loading conditions: A computational knee model", Bone Joint Res., vol. 6, pp. 31-42. [DOI] orthopedicskneegaitsensitivity analysis
2017 Kang KT, Koh YG, Son J, Kim SJ, Choi S, Jung M, Kim SH (2017), "Finite Element Analysis of the Biomechanical Effects of 3 Posterolateral Corner Reconstruction Techniques for the Knee Joint", Arthroscopy, vol. 33, pp. 1537-1550. [DOI] orthopedicskneegaitFEA
2017 Kilic H, Ozcan C, Efe H, Kasal A (2017), "Computer aided ergonomics in furniture design: baby crib case study", In: The XXVIIITH International conference Research for Furniture Industry, Poznan, Poland, 21-22 September 2017. work place ergonomicsspine
2017 Kloster BV, Iversen K (2017), "Parameterizing Running Kinematics", Masters Thesis, Aalborg University. [WWW] gaitmethods
2017 Kuai S, Liu W, Ji R, Zhou W (2017), "The Effect of Lumbar Disc Herniation on Spine Loading Characteristics during Trunk Flexion and Two Types of Picking Up Activities", J. Healthc. Eng., vol. 2017. [DOIWWW] work place ergonomicsspine
2017 Kuai S, Zhou W, Liao Z, Ji R, Guo D, Zhang R, Liu W (2017), "Influences of lumbar disc herniation on the kinematics in multi-segmental spine, pelvis, and lower extremities during five activities of daily living", BMC Musculoskelet. Disord., vol. 18, pp. 216. [DOI] orthopedicsspinelower extremity
2017 LIa L, Xiang Z, LIUa H, Shao Y, Zhang J (2017), "Design and Simulation of Lower Limb Rehabilitation Robot Based on Human Physiological Characteristics", In: Transdisciplinary Engineering: a Paradigm Shift: Proceedings of the 24th ISPE Inc. International Conference on Transdisciplinary Engineering, July 10-14 2017, pp. 428. [WWW] exoskeletonlower extremityrehab
2017 Lee H, Jung M, Lee KK, Lee SH (2017), "A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine", Sensors , vol. 17, pp. 299. [DOI] sportshipkneemethodsvalidation
2017 Lemieux PO, Cresson T, Aissaoui R (2017), "Simultaneous estimation of the path, magnitude and orientation of the femorotibial contact forces using bone geometry constraints: an exploratory numerical study for the stance phase of gait", Multibody Syst. Dyn., vol. 41, pp. 25-45. [DOI] kneegaitmethods
2017 Letier P, Fau G, Mittag U, Zange J, Rittweger J, Jung M, McIntyre J, Runge A (2017), "SOLEUS: Ankle Foot Orthosis for Space Countermeasure with Immersive Virtual Reality", Book Chapter, In: Wearable Robotics: Challenges and Trends, pp. 305-309. [DOIWWW] exoskeletonaerospacelower extremity
2017 Li X, Komeili A, Gül M, El-Rich M (2017), "A framework for evaluating muscle activity during repetitive manual material handling in construction manufacturing", Autom. Constr., vol. 79, pp. 39-48. [DOIWWW] work place ergonomicsspinevalidation
2017 Liao Z, Lu Z, Peng C, Li Y, Zhang J, Yao L (2017), "Ankle Active Rehabilitation Strategies Analysis Based on the Characteristics of Human and Robotic Integrated Biomechanics Simulation", In: Intelligent Robotics and Applications, pp. 3-13. [DOI] exoskeletonanklefootrehab
2017 Lund Ohlsson M, Laaksonen MS (2017), "Sitting position affects performance in cross-country sit-skiing", Eur. J. Appl. Physiol., vol. 117, pp. 1095-1106. [DOI] sportsrehab
2017 Marra MA, Andersen MS, Damsgaard M, BF, Janssen D, Verdonschot N (2017), "Evaluation of a Surrogate Contact Model in Force-Dependent Kinematic Simulations of Total Knee Replacement", J. Biomech. Eng., vol. 139, pp. 081001. [DOIWWW] kneegaitmethods
2017 Mochimaru M, National Institute of Advanced Industrial Science and Technology (AIST) Central #1, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8560, Japan (2017), "Digital human models for human-centered design", J. Robot. Mechatron., vol. 29, pp. 783-789. [DOIWWW] methods
2017 Møller KL, Brauer C, Mikkelsen S, Loft S, Simonsen EB, Koblauch H, Bern SH, Alkjær T, Hertel O, Becker T, Larsen KH, Bonde JP, Thygesen LC (2017), "Copenhagen Airport Cohort: air pollution, manual baggage handling and health", BMJ Open, vol. 7. [DOI] aerospacework place ergonomics
2017 Møller SP, Brauer C, Mikkelsen S, Alkjær T, Koblauch H, Pedersen EB, Simonsen EB, Thygesen LC (2017), "Risk of subacromial shoulder disorder in airport baggage handlers: combining duration and intensity of musculoskeletal shoulder loads", Ergonomics, pp. 1-29. [DOI] orthopedicsaerospacework place ergonomicsshoulder
2017 Noor NS, Ghazalli Z, Rejab MR, Fauzi FA, Mamat R, Kadirgama K, Sani MS, Ahmad Z, Johari NH (2017), "A Comparison of Muscular Activity Among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method", Adv. Sci. Lett., vol. 23, pp. 11471-11474. [DOIWWW] automotiveseating
2017 Nowakowska K, Gzik M, Michnik R, Myśliwiec A, Jurkojć J, Suchoń S, Burkacki M (2017), "The Loads Acting on Lumbar Spine During Sitting Down and Standing Up", Book Chapter, In: Innovations in Biomedical Engineering, pp. 169-176. [DOIWWW] spine
2017 Nowakowska K, Michnik R, Jochymczyk-Woźniak K, Jurkojć J, Kopyta I (2017), "Evaluation of Locomotor Function in Patients with CP Based on Muscle Length Changes", In: Innovations in Biomedical Engineering, pp. 161-168. [DOI] gait
2017 Ogrodnik J, Piszczatowski S (2017), "Influence of modified muscle morphology and activity pattern on the results of musculoskeletal system modelling in cerebral palsy patient", Acta Bioeng. Biomech., vol. 19, pp. 63-75. [WWW] lower extremitygait
2017 Ohlsson ML, Laaksonen MS (2017), "Erratum to: Sitting position affects performance in cross-country sit-skiing", Eur. J. Appl. Physiol., vol. 117, pp. 2123-2124. [DOI] sportsrehab
2017 Oliveira AS, Silva PB, Lund ME, Farina D, Kersting UG (2017), "Balance Training Enhances Motor Coordination During a Perturbed Sidestep Cutting Task", J. Orthop. Sports Phys. Ther., vol. 47, pp. 853-862. [DOI] sportstrunkknee
2017 Plantard P, Muller A, Pontonnier C, Dumont G, Shum HP, Multon F (2017), "Inverse dynamics based on occlusion-resistant Kinect data: Is it usable for ergonomics?", Int. J. Ind. Ergon., vol. 61, pp. 71-80. [DOIWWW] work place ergonomicsmethods
2017 Reed SA (2017), "A preliminary musculoskeletal model of the German Shepherd lumbosacral spine: a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Animal Science at Massey University, Manawatū, New Zealand", Ph.D. Thesis, Massey University. [WWW] spineanimal
2017 Sakai R, Uchino M, Yoneo T, Ohtaki Y, Minehara H, Matsuura T, Gomi T, Ujihira M (2017), "Influence of hooks and a lag screw on internal fixation plates for lateral malleolar fracture: a biomechanical and ergonomic study", J. Orthop. Surg. Res., vol. 12, pp. 34. [DOI] orthopedicsankleFEA
2017 Skals S, Jung MK, Damsgaard M, Andersen MS (2017), "Prediction of ground reaction forces and moments during sports-related movements", Multibody Syst. Dyn., vol. 39, pp. 175-195. [DOI] sportsvalidation
2017 Skals S, Rasmussen KP, Bendtsen KM, Yang J, Andersen MS (2017), "A musculoskeletal model driven by dual Microsoft Kinect Sensor data", Multibody Syst. Dyn., pp. 1-20. [DOIWWW] upper extremitylower extremitygaitmethods
2017 Skipper Andersen M, de Zee M, Damsgaard M, Nolte D, Rasmussen J (2017), "Introduction to Force-Dependent Kinematics: Theory and Application to Mandible Modeling", J. Biomech. Eng., vol. 139, pp. 091001. [DOI] mandiblemethods
2017 Tagawa Y, Yamamoto N, Omoto M, Matsuse H, Shiba N (2017), "Simulation of oxygen uptake and leg joint reaction force during ergometer exercise under altered gravity", In: 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1901-1904. [WWW] lower extremity
2017 Van Houcke J, Schouten A, Steenackers G, Vandermeulen D, Pattyn C, Audenaert EA (2017), "Computer-based estimation of the hip joint reaction force and hip flexion angle in three different sitting configurations", Appl. Ergon., vol. 63, pp. 99-105. [DOI] orthopedicsautomotivehip
2017 Vanheule V, Delport HP, Andersen MS, Scheys L, Wirix-Speetjens R, Jonkers I, Victor J, Vander Sloten J (2017), "Evaluation of predicted knee function for component malrotation in total knee arthroplasty", Med. Eng. Phys., vol. 40, pp. 56-64. [DOI] orthopedicskneemethods
2017 Wang X, Ma Y, Hou BY, Lam WK (2017), "Influence of Gait Speeds on Contact Forces of Lower Limbs", J. Healthc. Eng., vol. 2017. [DOIWWW] gait
2017 Wunsch T, Alexander N, Kröll J, Stöggl T, Schwameder H (2017), "Effects of a leaf spring structured midsole on joint mechanics and lower limb muscle forces in running", PLoS One, vol. 12, pp. e0172287. [DOI] foot
2017 Xu C, Silder A, Zhang J, Reifman J, Unnikrishnan G (2017), "A cross-sectional study of the effects of load carriage on running characteristics and tibial mechanical stress: implications for stress-fracture injuries in women", BMC Musculoskelet. Disord., vol. 18, pp. 125. [DOI] lower extremitygaitFEAvalidation
2017 Yin W, Ren S, Huang H, Yu Y, Liang Z, Ao Y, Rong Q (2017), "Dynamical Characteristics of Anterior Cruciate Ligament Deficiency Combined Meniscus Injury Knees", Book Chapter, In: Fei M, Ma S, Li X, Sun X, Jia L, Su Z (Ed): Advanced Computational Methods in Life System Modeling and Simulation, pp. 132-139. [DOIWWW] orthopedicskneegait
2017 Zhang J, Chen Z, Wang L, Li D, Jin Z (2017), "A patient-specific wear prediction framework for an artificial knee joint with coupled musculoskeletal multibody-dynamics and finite element analysis", Tribol. Int., vol. 109, pp. 382-389. [DOIWWW] orthopedicskneegaitFEA
2017 Zhou L, Bai S, Li Y (2017), "Energy Optimal Trajectories in Human Arm Motion Aiming for Assistive Robots", MIC, vol. 38, pp. 11-19. [DOIWWW] exoskeletonupper extremity
2017 Zhou L, Li Y, Bai S (2017), "A human-centered design optimization approach for robotic exoskeletons through biomechanical simulation", Rob. Auton. Syst., vol. 91, pp. 337-347. [DOIWWW] exoskeletonupper extremityshoulderrehab
2016 Abdul Majid NA, Mohamaddan S, Omiya T, Notomi M (2016), "Musculoskeletal model of awkward carrying postures", Cogent Engineering, vol. 3, pp. 1256073. [DOIWWW] work place ergonomicsspinevalidation
2016 Al-Munajjed AA, Bischoff JE, Dharia MA, Telfer S, Woodburn J, Carbes S (2016), "Metatarsal Loading During Gait-A Musculoskeletal Analysis", J. Biomech. Eng., vol. 138, pp. 4032413. [DOI] orthopedicsfootgait
2016 Alexander N, Schwameder H (2016), "Effect of sloped walking on lower limb muscle forces", Gait Posture, vol. 47, pp. 62-67. [DOI] sportslower extremitygaitrehab
2016 Alexander N, Schwameder H (2016), "Comparison of Estimated and Measured Muscle Activity During Inclined Walking", J. Appl. Biomech., vol. 32, pp. 150-159. [DOI] lower extremitygaitvalidation
2016 Alexander N, Schwameder H (2016), "Lower limb joint forces during walking on the level and slopes at different inclinations", Gait Posture, vol. 45, pp. 137-142. [DOI] gait
2016 Ardestani MM, Moazen M (2016), "How human gait responds to muscle impairment in total knee arthroplasty patients: Muscular compensations and articular perturbations", J. Biomech., vol. 49, pp. 1620-1633. [DOI] orthopedicskneegait
2016 Arshad R, Zander T, Dreischarf M, Schmidt H (2016), "Influence of lumbar spine rhythms and intra-abdominal pressure on spinal loads and trunk muscle forces during upper body inclination", Med. Eng. Phys., vol. 38, pp. 333-338. [DOI] spinevalidation
2016 Blab F, Avci O, Daub U, Schneider U (2016), "New approaches for analysis in ergonomics: From paper and pencil methods to biomechanical simulation", Book Chapter, In: 16. Internationales Stuttgarter Symposium, pp. 821-835. [DOIWWW] work place ergonomicsmethods
2016 Camino Willhuber G, Zderic I, Gras F, Wahl D, Sancineto C, Barla J, Windolf M, Richards RG, Gueorguiev B (2016), "Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study", Int. Orthop., vol. 40, pp. 1537-1543. [DOI] orthopedicstrunkgait
2016 Carbone V (2016), "Subject-specific lower extremity modeling. Personalization of musculoskeletal models using medical imaging and functional measurements", Thesis, University of Twente, Enschede, Netherlands. [PDFWWW] lower extremitymethodsvalidation
2016 Carbone V, van der Krogt MM, Koopman HF, Verdonschot N (2016), "Sensitivity of subject-specific models to Hill muscle-tendon model parameters in simulations of gait", J. Biomech., vol. 49, pp. 1953-1960. [DOI] lower extremitygait
2016 Chen Z, Jin Z (2016), "Prediction of in-vivo kinematics and contact track of total knee arthroplasty during walking", Biosurface and Biotribology, vol. 2, pp. 86-94. [DOIWWW] orthopedicskneegait
2016 Chen Z, Zhang Z, Wang L, Li D, Zhang Y, Jin Z (2016), "Evaluation of a subject-specific musculoskeletal modelling framework for load prediction in total knee arthroplasty", Med. Eng. Phys., vol. 38, pp. 708-716. [DOI] orthopedicskneevalidation
2016 Cruz Ruiz AL, Pontonnier C, Levy J, Dumont G (2016), "A synergy-based control solution for overactuated characters: Application to throwing", Comput. Animat. Virtual Worlds. [DOI] upper extremitymethods
2016 David S, Funken J, Potthast W, Blanke A (2016), "Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects", J. R. Soc. Interface, vol. 13. [DOI] mandibleanimal
2016 David S, Funken J, Potthast W, Blanke A (2016), "Musculoskeletal modelling of the dragonfly mandible system as an aid to understanding the role of single muscles in an evolutionary context", J. Exp. Biol., vol. 219, pp. 1041-1049. [DOI] mandibleanimal
2016 David S, Peters M, Komnik I, Potthast W (2016), "Victory or defeat. How movement strategies distinguish fast direction changes from cutting maneuvers with high injury risk", In: 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [WWW] sportsknee
2016 Davoudabadi Farahani S, Svinin M, Andersen MS, de Zee M, Rasmussen J (2016), "Prediction of closed-chain human arm dynamics in a crank-rotation task", J. Biomech., vol. 49, pp. 2684-2693. [DOI] upper extremitymethodsvalidation
2016 Dupré T, Mortensen KR, Lysdal FG, Funken J, Müller R, Braun M, Krahl H, Kersting U, Potthast W, Pforzheim AC (2016), "Hip Joint Load and Muscle Stress in Soccer Inside Passing", In: ISBS-Conference Proceedings Archive, 34th International Conference on Biomechanics in Sport. [WWW] sports
2016 Eddy M, Moore C, Nimbarte A (2016), "Evaluation of shoulder strain during multi-directional forceful arm exertions", Occup. Ergonomics, vol. 13, pp. 131-138. [WWW] work place ergonomicsshoulder
2016 Eschweiler J, Stromps JP, Fischer M, Schick F, Rath B, Pallua N, Radermacher K (2016), "A biomechanical model of the wrist joint for patient-specific model guided surgical therapy: Part 2", Proc. Inst. Mech. Eng. H, vol. 230, pp. 326-334. [DOI] orthopedicswrist
2016 Eschweiler J, Stromps JP, Fischer M, Schick F, Rath B, Pallua N, Radermacher K (2016), "Development of a biomechanical model of the wrist joint for patient-specific model guided surgical therapy planning: Part 1", Proc. Inst. Mech. Eng. H, vol. 230, pp. 310-325. [DOI] orthopedicswristupper extremityvalidation
2016 Farahani SD, Andersen MS, de Zee M, Rasmussen J (2016), "Optimization-based dynamic prediction of kinematic and kinetic patterns for a human vertical jump from a squatting position", Multibody Syst. Dyn., vol. 36, pp. 37-65. [DOIWWW] methods
2016 Grüneweller N, Raschke M, Zderic I, Windolf M (2016), "Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a new hemi-pelvis test model", J. Orthop. Res., vol. 35, pp. 1485-1493. orthopedicsgait
2016 Guan X, Ji L, Wang R, Huang W (2016), "Optimization of an unpowered energy-stored exoskeleton for patients with spinal cord injury", In: 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5030-5033. [DOI] exoskeletonspinehiprehab
2016 Guzik-Kopyto A, Michnik R, Wodarski P, Chuchnowska I (2016), "Determination of Loads in the Joints of the Upper Limb During Activities of Daily Living", Book Chapter, In: Information Technologies in Medicine, pp. 99-108. [DOIWWW] upper extremity
2016 Hangalur G, Brenneman E, Nicholls M, Bakker R, Laing A, Chandrashekar N (2016), "Can a knee brace reduce the strain in the anterior cruciate ligament? A study using combined in vivo/in vitro method", Prosthet. Orthot. Int., vol. 40, pp. 394-399. [DOI] exoskeletonkneerehab
2016 Hölscher T, Weber T, Lazarev I, Englert C, Dendorfer S (2016), "Influence of rotator cuff tears on glenohumeral stability during abduction tasks", J. Orthop. Res., vol. 34, pp. 1628-1635. [DOI] orthopedicsupper extremityshoulder
2016 Ignasiak D, Dendorfer S, Ferguson SJ (2016), "Thoracolumbar spine model with articulated ribcage for the prediction of dynamic spinal loading", J. Biomech., vol. 49, pp. 959-966. [DOI] spinemethods
2016 Ignasiak D, Ferguson SJ, Arjmand N (2016), "A rigid thorax assumption affects model loading predictions at the upper but not lower lumbar levels", J. Biomech., vol. 49, pp. 3074-3078. [DOI] spine
2016 Jakobsen L, Ahlers FH (2016), "Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics", Thesis, Aalborg University, Denmark. [PDFWWW] sportsupper extremity
2016 Jakobsen L, Ahlers FH (2016), "Biomechanical analysis of hand cycling propulsion movement. A musculoskeletal modelling approach and Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics - worksheets", Thesis, Aalborg University, Denmark. [WWW] sportsupper extremity
2016 Ji Z, Wang H, Jiang G, Li L (2016), "Analysis of Muscle Activity Utilizing Bench Presses in the AnyBody Simulation Modelling System", Modell. Simul. Mater. Sci. Eng., vol. 2016, pp. 1-7. [PDFDOIWWW] sportsvalidation
2016 Jia B, Nussbaum MA (2016), "Development and evaluation of an EMG-based model to estimate lumbosacral loads during seated work", Int. J. Ind. Ergon., vol. 55, pp. 96-102. [DOIWWW] spineseatingmethods
2016 Jianbo X, Suihuai Y, Wen F (2016), "Inverse dynamics simulation and quantitative evaluation of comfort level for brake operations on workover rig", In: Robots & Intelligent System (ICRIS), 2016 International Conference on 27-28 August 2016. work place ergonomics
2016 Jochymczyk-Wozniak K, Jurkojc J, Kopyta I (2016), "Evaluation of Locomotor Function in Patients with CP Based on Muscle Length Changes", Innovations in Biomedical Engineering, vol. 526, pp. 161. [DOIWWW] gait
2016 Jung Y, Jung M, Ryu J, Yoon S, Park SK, Koo S (2016), "Dynamically adjustable foot-ground contact model to estimate ground reaction force during walking and running", Gait Posture, vol. 45, pp. 62-68. [DOI] gaitmethods
2016 Kim Y, Ta D, Jung M, Koo S (2016), "A musculoskeletal lumbar and thoracic model for calculation of joint kinetics in the spine", J. Mech. Sci. Technol., vol. 30, pp. 2891-2897. [DOIWWW] spinemethods
2016 Komnik I, Peters M, Funken J, David S, Weiss S, Potthast W (2016), "Non-Sagittal Knee Joint Kinematics and Kinetics during Gait on Level and Sloped Grounds with Unicompartmental and Total Knee Arthroplasty Patients", PLoS One, vol. 11, pp. e0168566. [PDFDOI] orthopedicskneegait
2016 Komnik I, Peters M, Potthast W (2016), "Lower limb kinematics and kinetics after total knee arthroplasty surgery during running – a case study", In: 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [PDFWWW] orthopedicssportsknee
2016 Lemieux PO, Barré A, Hagemeister N, Aissaoui R (2016), "Degrees of freedom coupling adapted to the upper limb of a digital human model", In: 4th International Digital Human Modeling Symposium. [WWW] shouldermethods
2016 Marková M, Gallo LM (2016), "The influence of the human TMJ eminence inclination on predicted masticatory muscle forces", Hum. Mov. Sci., vol. 49, pp. 132-140. [DOI] mandible
2016 Meena VK, Kumar M, Pundir A, Singh S, Goni V, Kalra P, Sinha RK (2016), "Musculoskeletal-based finite element analysis of femur after total hip replacement", Proc. Inst. Mech. Eng. H, vol. 230, pp. 553-560. [DOI] orthopedicshipFEA
2016 Mehle K, Eckert AW, Gentzsch D, Schwan S, Ludtka CM, Knoll WD (2016), "Evaluation of a new PEEK mandibular reconstruction plate design for continuity defect therapy by finite element analysis", International Journal of New Technology and Research, vol. 2, pp. 65-71. [PDFWWW] orthopedicsmandibleFEA
2016 Michael David Stokes CU, Authors (2016), "Design and Initial Verification of a Novel Total Knee Replacement that Incorporates Synthetic Ligaments to Influence Knee Stability", Thesis, Clemson University. [WWW] orthopedicsknee
2016 Miyoshi T, Asaishi K, Nakamura T, Takagi M (2016), "Master–Slave-Type Gait Training System for Hip Movement Disorders", Sens. Mater., vol. 28, pp. 295–309. exoskeletongaitrehab
2016 Muehling M, Weber T, Russ P, Dendorfer S (2016), "Prediction of ground reaction forces and moments by using gait analysis silhouette tracking method compared to marker tracking and force platform method", White paper - Simi Reality Motion Systems GmbH. [PDFWWW] gaitmethods
2016 Nakashima M, Hosoya T, Shimana T (2016), "Musculoskeletal Simulation of Sports Motion Considering Tension Distribution in a Whole Body Compression Garment", Procedia Engineering, vol. 147, pp. 252-256. [DOIWWW] sportsmethods
2016 Ogrodnik J, Piszczatowski S, Syczewska M (2016), "The possibility of evaluation of the pathological muscle function using modelling simulation", Current Research in Motor Control, pp. 192-197. [PDF] gait
2016 Oosterwaal M (2016), "The Glasgow-Maastricht foot model: development, repeatability and sources of error of a 26 segment multi-body foot model", Thesis, Maastricht University, The Netherlands. [WWW] footgait
2016 Oosterwaal M, Carbes S, Telfer S, Woodburn J, Tørholm S, Al-Munajjed AA, van Rhijn L, Meijer K (2016), "The Glasgow-Maastricht foot model, evaluation of a 26 segment kinematic model of the foot", J. Foot Ankle Res., vol. 9, pp. 19. [PDFDOI] footgaitmethods
2016 Pablo Joaquin Dopico Uof, Authors (2016), "A Subject Specific Surface Electromyography Model For Estimating L4/L5 Compressive Loading", Thesis, University of Tennessee Health Science Center. [DOIWWW] spine
2016 Putzer M, Auer S, Malpica W, Suess F, Dendorfer S (2016), "A numerical study to determine the effect of ligament stiffness on kinematics of the lumbar spine during flexion", BMC Musculoskelet. Disord., vol. 17, pp. 95. [DOI] spinemethods
2016 Putzer M, Ehrlich I, Rasmussen J, Gebbeken N, Dendorfer S (2016), "Sensitivity of lumbar spine loading to anatomical parameters", J. Biomech., vol. 49, pp. 953-958. [DOI] spinemethods
2016 Ren S (2016), "Biomechanical effects of cranio-cervical positions on cervical musculoskeletal disorders", Thesis, The Hong Kong Polytechnic University. [WWW] work place ergonomicsspine
2016 Renkawitz T, Weber T, Dullien S, Woerner M, Dendorfer S, Grifka J, Weber M (2016), "Leg length and offset differences above 5mm after total hip arthroplasty are associated with altered gait kinematics", Gait Posture, vol. 49, pp. 196-201. [DOI] orthopedicshipgait
2016 Sanford B, Williams J, Zucker-Levin A, Mihalko W (2016), "PEAK HIP, KNEE AND ANKLE JOINT FORCES DURING GAIT AFTER TOTAL KNEE ARTHROPLASTY", Bone Joint J., vol. 98-B, pp. 129-129. [WWW] orthopedicskneegait
2016 Savonnet L, Duprey S, Wang X (2016), "Coupling rigid multi-body and deformable finite element human models for assessing seat discomfort", DHM 2016, Montreal, 2016. [PDFWWW] automotiveseatingFEA
2016 Seo J, Choi J, Kang D, Yang S, Kim D, Tack G (2016), "Forward and inverse dynamic study during pedaling: Comparison between the young and the elderly", Technol. Health Care, vol. 24 Suppl 2, pp. S659-64. [DOI] validationrehab
2016 Sins L, Tétreault P, Nuño N, Hagemeister N (2016), "Effects of Prosthetic Mismatch and Subscapularis Tear on Glenohumeral Contact Patterns in Total Shoulder Arthroplasty: A Numerical Musculoskeletal Analysis", J. Biomech. Eng., vol. 138. [DOI] orthopedicsshoulder
2016 Stambolian D, Eltoukhy M, Asfour S (2016), "Development and validation of a three dimensional dynamic biomechanical lifting model for lower back evaluation for careful box placement", Int. J. Ind. Ergon., vol. 54, pp. 10-18. [DOIWWW] work place ergonomicsspinevalidation
2016 Theodorakos I, Rueterbories J, Lund ME, Andersen MS, de Zee M, Kersting UG (2016), "Ankle bracing effects on knee and hip mechanics during landing on inclined surfaces", International Biomechanics, vol. 3, pp. 22-32. [DOIWWW] exoskeletonhipkneeanklemethodsrehab
2016 Tomaszewski P, Eijkenboom J, Berahmani S, Janssen D, Verdonschot N (2016), "FINITE ELEMENT ASSESSMENT OF INITIAL STABILITY AND BONE REMODELING OF SHORT HIP STEM", Bone Joint J., vol. 98-B, pp. 78-78. [WWW] orthopedicshipFEA
2016 Trapanese S, Naddeo A, Cappetti N (2016), "A Preventive Evaluation of Perceived Postural Comfort in Car-Cockpit Design: Differences between the Postural Approach and the Accurate Muscular Simulation under Different Load Conditions in the Case of Steering-Wheel Usage", In: SAE Technical Paper Series. [DOIWWW] automotiveupper extremityseatingmethods
2016 Upmann A (2016), "Application of digital human modeling for the ergonomic evaluation of handbrakes in passenger vehicles", Ph.D. Thesis, Dissertation, Köln, Deutsche Sporthochschule Köln, 2016. [WWW] automotiveupper extremityvalidation
2016 Weber T, Dendorfer S, Bulstra SK, Grifka J, Verkerke GJ, Renkawitz T (2016), "Gait six month and one-year after computer assisted Femur First THR vs. conventional THR. Results of a patient- and observer- blinded randomized controlled trial", Gait Posture, vol. 49, pp. 418-425. [DOI] orthopedicshipgait
2016 Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ (2016), "Musculoskeletal modeling of human lower limb during normal walking, one-legged forward hopping and side jumping: Comparison of measured EMG and predicted muscle activity patterns", J. Biomech., vol. 49, pp. 3660-3666. [DOI] lower extremityvalidation
2016 Wibawa AD, Verdonschot N, Halbertsma JP, et al. (2016), "A Trap Motion in Validating Muscle Activity Prediction from Musculoskeletal Model using EMG", International Journal of. [WWW] validation
2016 Worsley PR, Whatling G, Barrett D, Holt C, Stokes M, Taylor M (2016), "Assessing changes in subjective and objective function from pre- to post-knee arthroplasty using the Cardiff Dempster-Shafer theory classifier", Comput. Methods Biomech. Biomed. Engin., vol. 19, pp. 418-427. [DOI] orthopedicskneemethods
2016 Xu C, Silder A, Zhang J, Hughes J, Unnikrishnan G, Reifman J, Rakesh V (2016), "An Integrated Musculoskeletal-Finite-Element Model to Evaluate Effects of Load Carriage on the Tibia During Walking", J. Biomech. Eng., vol. 138. [DOI] defenselower extremitygaitFEAvalidation
2016 Zander T, Dreischarf M, Schmidt H (2016), "Sensitivity analysis of the position of the intervertebral centres of reaction in upright standing--a musculoskeletal model investigation of the lumbar spine", Med. Eng. Phys., vol. 38, pp. 297-301. [DOI] spinemethods
2016 Zeng WN, Wang FY, Chen C, Zhang Y, Gong XY, Zhou K, Chen Z, Wang D, Zhou ZK, Yang L (2016), "Investigation of association between hip morphology and prevalence of osteoarthritis", Sci. Rep., vol. 6, pp. 1-8. [DOIWWW] orthopedicshiplower extremitygait
2015 Ali N (2015), "Predicting risk factors of noncontact anterior cruciate ligament injuries during single-leg landing", Thesis, University of Ottawa, Canada. [PDFWWW] orthopedicssportskneevalidation
2015 Ardestani MM, Moazen M, Chen Z, Zhang J, Jin Z (2015), "A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitation", Neurocomputing, vol. 154, pp. 174-188. [DOIWWW] orthopedicskneemethodsFEArehab
2015 Ardestani MM, Moazen M, Jin Z (2015), "Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics", Med. Eng. Phys., vol. 37, pp. 165-174. [DOI] lower extremitygait
2015 Benoit DL, Damsgaard M, Andersen MS (2015), "Surface marker cluster translation, rotation, scaling and deformation: Their contribution to soft tissue artefact and impact on knee joint kinematics", J. Biomech., vol. 48, pp. 2124-2129. [DOI] kneegaitmethods
2015 Boije M, Jönsson M (2015), "Biomechanical simulations of a flywheel exercise device in microgravity", Thesis, Karolinska Institutet, Sweden. [PDFWWW] aerospacesports
2015 Carbone V, Fluit R, Pellikaan P, van der Krogt MM, Janssen D, Damsgaard M, Vigneron L, Feilkas T, Koopman HF, Verdonschot N (2015), "TLEM 2.0 - a comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity", J. Biomech., vol. 48, pp. 734-741. [DOI] lower extremitymethods
2015 Chen Z, Wang L, Liu Y, He J, Lian Q, Li D, Jin Z (2015), "Effect of component mal-rotation on knee loading in total knee arthroplasty using multi-body dynamics modeling under a simulated walking gait", J. Orthop. Res., vol. 33, pp. 1287-1296. [DOI] orthopedicskneegait
2015 Cronskär M, Rasmussen J, Tinnsten M (2015), "Combined finite element and multibody musculoskeletal investigation of a fractured clavicle with reconstruction plate", Comput. Methods Biomech. Biomed. Engin., vol. 18, pp. 740-748. [DOI] orthopedicsshoulderFEA
2015 Cutlip K, Nimbarte AD, Chowdhury SK, Jaridi M (2015), "Evaluation of Shoulder Stability During Forceful Arm Exertions", Industrial and Systems Engineering Review, vol. 3, pp. 49-58. [WWW] work place ergonomicsshoulder
2015 Davoudabadi Farahani S, Andersen MS, de Zee M, Rasmussen J (2015), "Human arm posture prediction in response to isometric endpoint forces", J. Biomech., vol. 48, pp. 4178-4184. [DOI] upper extremitymethods
2015 Duprey S, Savonnet L, Black N, Wang X (2015), "Muscle force prediction: can we rely on musculoskeletal model estimations? A case study on push force exertions with the upper limb", Comput. Methods Biomech. Biomed. Engin., vol. 18 Suppl 1, pp. 1934-1935. [DOI] work place ergonomicsupper extremityvalidation
2015 Efe H, Kasal A, Kiliç H, Ozcan C (2015), "Effect of the Critical Ergonomics Parameters on Domestic Chairs for Comfort using the Human Based Product Development Software", In: The XXVIIth International Conference Research for Furniture Industry. [PDFWWW] work place ergonomicsfurnitureseating
2015 Farahani SD, Bertucci W, Andersen MS, de Zee M, Rasmussen J (2015), "Prediction of crank torque and pedal angle profiles during pedaling movements by biomechanical optimization", Struct. Multidiscip. Optim., vol. 51, pp. 251-266. [DOIWWW] sportsmethodsvalidation
2015 Fluit R (2015), "Functional outcome prediction after surgery : a bridge too far?", Ph.D. Thesis, University of Twente. [DOIWWW] orthopedicslower extremitygaitmethods
2015 Fu Y, Li S, Chen Q, Zhou W (2015), "Modeling and Simulating Lifting Task of Below-Knee Amputees", In: Digital Human Modeling. Applications in Health, Safety, Ergonomics and Risk Management: Ergonomics and Health, pp. 134-143. [DOIWWW] work place ergonomicsspinelower extremityrehab
2015 Funken J, Heinrich B, Heinrich K, Felker K, Fett D, Platen P, Brüggemann GP (2015), "Estimating lumbar spine loading during volleyball specific movements using 3d modeling", In: 33rd International Conference on Biomechanics in Sports, Poitiers, France. [PDFWWW] sportsspine
2015 Gammelgaard MS (2015), "A general marker-less motion capture approach for the Microsoft Kinect Sensor v2 using subject-specific articulated models within an iterative closest point algorithm for improved anatomical accuracy", Thesis, Aalborg University, Denmark. [WWW] sportslower extremitymethods
2015 Graichen S (2015), "Biomechanische Betrachtung manueller Montageprozesse – Beitrag zur Bewertung dynamischer Arbeitsformen innerhalb des Greifraums [Biomechanical view on manual assembly processes - Contribution to the evaluation of dynamic work within the space of reach]", Thesis, Karlsruhe Institute of Technology, Germany. [PDF] work place ergonomics
2015 Graichen S, Stein T, Deml B (2015), "Adaptive Workplace Design Based on Biomechanical Stress Curves", Book Chapter, In: Brecher C (Ed): Advances in Production Technology, pp. 175-183. [DOIWWW] work place ergonomicsmethods
2015 Han KS, Nam H, Kim K (2015), "Core muscle Strengthening Effect During Spine Stabilization Exercise", Journal of Electrical Engineering and Technology, vol. 10, pp. 2413-2419. [DOIWWW] sportsspinerehab
2015 Kersting U, Theodorakos I, Lund ME, Andersen MS, de Zee M (2015), "Semi-rigid ankle braces and force transfer in the ankle joint when landing on inclined surfaces", Footwear Sci., vol. 7, pp. S19-S21. [DOI] exoskeletonsportslower extremityanklerehab
2015 Koblauch H (2015), "Low back load in airport baggage handlers", Thesis, University of Copenhagen, Denmark. [PDF] aerospacework place ergonomicsspinevalidation
2015 Kolk S, Fluit R, Luijten J, Heesterbeek PJ, Geurts AC, Verdonschot N, Weerdesteyn V (2015), "Gait and lower limb muscle strength in women after triple innominate osteotomy", BMC Musculoskelet. Disord., vol. 16, pp. 68. [DOI] orthopedicslower extremitygait
2015 Koning BH, van der Krogt MM, Baten CT, Koopman BF (2015), "Driving a musculoskeletal model with inertial and magnetic measurement units", Comput. Methods Biomech. Biomed. Engin., vol. 18, pp. 1003-1013. [DOIWWW] lower extremitygaitmethods
2015 Kulcsar RM, Borozan IS, Argesanu V, Maniu I, Jula M, Streian F, Puta T, Nagel A (2015), "Modeling, simulation and experimental determination of the spine muscle's activities of the driver", Appl. Mech. Mater., vol. 760. [WWW] automotivespinevalidation
2015 Li J, McWilliams AB, Jin Z, Fisher J, Stone MH, Redmond AC, Stewart TD (2015), "Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking", Clin. Biomech. , vol. 30, pp. 513-519. [DOI] orthopedicshipgait
2015 Li L, Ji Z, Xia Y, Gong R (2015), "Development and Validation of a Portable Human Body Joint Power Test System", Int. J. Distrib. Sens. Netw., vol. 11, pp. 341072. [DOI] sportsmethods
2015 Li W, Zhang M, Lv G, Han Q, Gao Y, Wang Y, Tan Q, Zhang M, Zhang Y, Li Z (2015), "Biomechanical response of the musculoskeletal system to whole body vibration using a seated driver model", Int. J. Ind. Ergon., vol. 45, pp. 91-97. [DOIWWW] automotiveseating
2015 Lindenroth L, Caplan N, Debuse D, Salomoni SE, Evetts S, Weber T (2015), "A novel approach to activate deep spinal muscles in space—Results of a biomechanical model", Acta Astronaut., vol. 116, pp. 202-210. [DOIWWW] aerospacespinevalidation
2015 Lund ME, Andersen MS, de Zee M, Rasmussen J (2015), "Scaling of musculoskeletal models from static and dynamic trials", International Biomechanics, vol. 2, pp. 1-11. [PDFDOIWWW] methodsvalidation
2015 Mabuma J, Schwarze M, Hurschler C, Markert B, Ehlers W (2015), "Effects of osteoarthritis and pathological walking on contact stresses in femoral cartilage", Biomech. Model. Mechanobiol., vol. 14, pp. 1167-1180. [DOI] orthopedicskneegait
2015 Marie C (2015), "Strength analysis of clavicle fracture fixation devices and fixation techniques using finite element analysis with musculoskeletal force input", Med. Biol. Eng. Comput., vol. 53, pp. 759-769. [DOI] orthopedicsshoulderFEA
2015 Marra MA, Vanheule V, Fluit R, Koopman BH, Rasmussen J, Verdonschot N, Andersen MS (2015), "A subject-specific musculoskeletal modeling framework to predict in vivo mechanics of total knee arthroplasty", J. Biomech. Eng., vol. 137, pp. 020904. [DOIWWW] orthopedicskneegait
2015 Mellon SJ, Grammatopoulos G, Andersen MS, Pandit HG, Gill HS, Murray DW (2015), "Optimal acetabular component orientation estimated using edge-loading and impingement risk in patients with metal-on-metal hip resurfacing arthroplasty", J. Biomech., vol. 48, pp. 318-323. [DOI] orthopedicshipgait
2015 Mirakhorlo M, Azghani MR (2015), "Similarity of different lifting techniques in trunk muscular synergies", Acta Bioeng. Biomech., vol. 17, pp. 21-29. [WWW] work place ergonomicsspinelower extremityvalidation
2015 Nedergaard NJ, Heinen F, Sloth S, Holmberg HC, Kersting UG (2015), "Biomechanics of the ski cross start indoors on a customised training ramp and outdoors on snow", Sports Biomech., vol. 14, pp. 273-286. [DOI] sports
2015 Nishiki T, Tawara D, Tsujikami T, Ninomiya S, Okayama H, Morikawa S, Sakamoto J (2015), "Musculoskeletal simulation for design of supportive underwear for pelvic floor disorder", In: Proceedings 8th Asian-Pasific Conference on Biomechanics, 16-19 September 2015, Sapporo, Japan, pp. 282. [WWW] FEA
2015 Okamoto Y, Murakami H, Demura S, Kato S, Yoshioka K, Hayashi H, Sakamoto J, Kawahara N, Tsuchiya H (2015), "The effect of kyphotic deformity because of vertebral fracture: a finite element analysis of a 10° and 20° wedge-shaped vertebral fracture model", Spine J., vol. 15, pp. 713-720. [DOI] orthopedicsspineFEA
2015 Pendergast M, Rusovici R (2015), "A finite element parametric study of clavicle fixation plates", Int. j. numer. method. biomed. eng., vol. 31. [DOI] orthopedicsshoulderFEA
2015 Pieter Oomen, Janneke Annegarn, John Rasumussen, Jessica Rausch, Karl Siebertz, Lex Verdijk, Maarten Drost, Kenneth Meiler (2015), "Development and validation of a rule-based strength scaling method for musculoskeletal modeling", Int. J. Human Factors Modeling and Simulation, vol. 5, pp. 19-32. methodsvalidation
2015 Rajaee MA, Arjmand N, Shirazi-Adl A, Plamondon A, Schmidt H (2015), "Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities", Appl. Ergon., vol. 48, pp. 22-32. [DOI] spinevalidation
2015 Shin YH, Choi JS, Kang DW, Seo JW, Lee JH, Kim JY, Kim DH, Yang ST, Tack GR (2015), "A study on human musculoskeletal model for cycle fitting: comparison with EMG", International Journal of Medical, Health, Pharmaceutical and Biomedical Engineering, vol. 9 . [WWW] sportsvalidation
2015 Sins L, Tétreault P, Hagemeister N, Nuño N (2015), "Adaptation of the AnyBody™ Musculoskeletal Shoulder Model to the Nonconforming Total Shoulder Arthroplasty Context", J. Biomech. Eng., vol. 137, pp. 101006. [DOI] orthopedicsupper extremity
2015 Skals SL (2015), "Prediction of ground reaction forces and moments during sports-related movements", Thesis, Aalborg University, Denmark. [PDFWWW] sportsmethodsvalidation
2015 Van Branteghem A, Victor J, De Baets P, Verstraete M (2015), "A methodology to develop a patient-specific 3D musculoskeletal model based on MRI, ground reaction forces and motion capture data", SCADA J., vol. 6, pp. 5. [DOIWWW] orthopedicskneemethods
2015 Varady PA, Glitsch U, Augat P (2015), "Loads in the hip joint during physically demanding occupational tasks: A motion analysis study", J. Biomech., vol. 48, pp. 3227-3233. [DOI] orthopedicswork place ergonomicship
2015 Wang X, Wang C, Wang Z, Li H (2015), "Comfort Analysis in EVA Reachable Envelope Based on Human-Spacesuit Integrated Biomechanical Modeling", In: HCI International 2015 - Posters’ Extended Abstracts, pp. 539-545. [DOIWWW] aerospacework place ergonomicsupper extremity
2015 Weber TA, Dendorfer S, Grifka J, Verkerke GJ, Renkawitz T (2015), "Does Computer-Assisted Femur First THR Improve Musculoskeletal Loading Conditions?", Biomed Res. Int., vol. 2015, pp. 625317. [DOI] orthopedicshipmethods
2015 Wunsch T, Alexander N, Kröll J, Schwameder H (2015), "Effects of a leaf spring structured midsole on lower limb muscle forces in running", Footwear Sci., vol. 7, pp. S153-S155. [DOI] sportslower extremitygait
2015 Yang Y, Xu C, Guan XR, Wang YP (2015), "Numerical Analysis of Comfort of Military Helmets Based on Inverse Dynamics", Acta Armamentarii, vol. 36, pp. 321-326. [WWW] work place ergonomicsspine
2015 Yoder AJ, Petrella AJ, Silverman AK (2015), "Trunk-pelvis motion, joint loads, and muscle forces during walking with a transtibial amputation", Gait Posture, vol. 41, pp. 757-762. [DOI] spinegaitrehab
2015 Zander T, Dreischarf M, Schmidt H, Bergmann G, Rohlmann A (2015), "Spinal loads as influenced by external loads: a combined in vivo and in silico investigation", J. Biomech., vol. 48, pp. 578-584. [DOI] orthopedicsspine
2015 Zhang X, Chen Z, Wang L, Yang W, Li D, Jin Z (2015), "Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation", Proc. Inst. Mech. Eng. H, vol. 229, pp. 477-490. [DOI] orthopedicshipvalidation
2015 Zhou L, Bai S, Andersen MS, Rasmussen J (2015), "Modeling and Design of a Spring-loaded, Cable-driven, Wearable Exoskeleton for the Upper Extremity", MIC, vol. 36, pp. 167-177. [DOIWWW] exoskeletonupper extremitymethodsrehab
2014 Alexander N, Schwameder H (2014), "Analysis of muscle forces during downhill walking", In: eProceedings of the 32nd Conference of the International Society of Biomechanics in Sport; 2014; Johnson City, TN, pp. 199-202. [PDF] lower extremitygait
2014 Ali N, Andersen MS, Rasmussen J, Robertson DG, Rouhi G (2014), "The application of musculoskeletal modeling to investigate gender bias in non-contact ACL injury rate during single-leg landings", Comput. Methods Biomech. Biomed. Engin., vol. 17, pp. 1602-1616. [DOI] sportskneevalidation
2014 Ardestani MM, Chen Z, Wang L, Lian Q, Liu Y, He J, Li D, Jin Z (2014), "A neural network approach for determining gait modifications to reduce the contact force in knee joint implant", Med. Eng. Phys., vol. 36, pp. 1253-1265. [DOI] orthopedicskneegaitmethods
2014 Ardestani MM, Moazen M, Jin Z (2014), "Gait modification and optimization using neural network–genetic algorithm approach: Application to knee rehabilitation", Expert Syst. Appl., vol. 41, pp. 7466-7477. [DOIWWW] orthopedicskneegaitmethodsFEArehab
2014 Bajelan S, Azghani MR (2014), "Musculoskeletal modeling and simulation of three various Sit-to-Stand strategies: An evaluation of the biomechanical effects of the chair-rise strategy modification", Technol. Health Care, vol. 22, pp. 627-644. [DOI] rehab
2014 Basafa E, Murphy RJ, Gordon CR, Armand M (2014), "Modeling the biomechanics of swine mastication--an inverse dynamics approach", J. Biomech., vol. 47, pp. 2626-2632. [DOI] orthopedicsmandibleanimal
2014 Bonin D, Wischniewski S, Wirsching HJ, Upmann A, Rausch J, Paul G (2014), "Exchanging data between Digital Human Modelling systems : a review of data formats", In: 3rd International Digital Human Modeling Symposium, May 20-22 2014, Odaiba, Tokyo, Japan. Symposium Program and Paper Abstracts. [WWW] methods
2014 Bosch JB (2014), "Estudio computacional de los sistemas de fijación interna aplicados a la recuperación de fracturas diafisarias del húmero [Computational study of internal fixation systems applied to recovery of humeral diaphyseal fractures]", Thesis, Universidad De Las Palmas De Gran Canaria, Mexico. [PDFWWW] orthopedicsupper extremityFEA
2014 Chen Z, Zhang X, Ardestani MM, Wang L, Liu Y, Lian Q, He J, Li D, Jin Z (2014), "Prediction of in vivo joint mechanics of an artificial knee implant using rigid multi-body dynamics with elastic contacts", Proc. Inst. Mech. Eng. H, vol. 228, pp. 564-575. [DOI] orthopedicskneevalidation
2014 Coombs DJ, Wykosky S, Bushelow M (2014), "Calcaneal Fixation Plate Test Method Development", In: SIMULIA Community Conference, May 19-24, 2014, Providence, RI. [PDF] orthopedicsfootmethodsFEA
2014 Cutlip K, Nimbarte AD, Ning X, Jaridi M (2014), "A Biomechanical Strain Index to Evaluate Shoulder Stress", Proceedings of the 2014 Industrial and Systems Engineering Research Conference. [PDFWWW] work place ergonomicsshouldermethods
2014 DŚouza SF (2014), "Physical efficiency as a function of age: Development of an age scaling model for biomechanical simulation", Thesis, Technical University of Munich. [PDF] methods
2014 Fluit R, Andersen MS, Kolk S, Verdonschot N, Koopman HF (2014), "Prediction of ground reaction forces and moments during various activities of daily living", J. Biomech., vol. 47, pp. 2321-2329. [DOI] gaitmethods
2014 Fluit R, Andersen MS, Verdonschot N, Koopman HF (2014), "Optimal inverse dynamic simulation of human gait", Gait Posture, vol. 39, pp. S42. [PDFDOIWWW] orthopedicsgaitmethods
2014 Gao ZH, Fan D, Wang D, Zhao H, Zhao K, Chen C (2014), "Muscle activity and co-contraction of musculoskeletal model during steering maneuver", Biomed. Mater. Eng., vol. 24, pp. 2697-2706. [DOI] automotive
2014 Han KS, Yu CH, Kwon TK (2014), "Muscle forces and activation patterns in the spine during spine stabilization exercise using a whole body tilt device", International Journal of Precision Engineering and Manufacturing, vol. 15, pp. 2589-2595. spinevalidation
2014 Huang N, Yang X, Chen X (2014), "Modification of Muscle Force Prediction Model Based on Muscle Fatigue Analysis", Space Med. Med. Eng.. [WWW] aerospacemethods
2014 Ignasiak D, Ferguson SJ (2014), "Simulation of Spinal Loading: Importance of Subject-Specific Posture and Motion Patterns", Global Spine Journal, vol. 4, pp. s-0034-1376548-s-0034-1376548. [DOI] orthopedicsspine
2014 Jung Y, Jung M, Lee K, Koo S (2014), "Ground reaction force estimation using an insole-type pressure mat and joint kinematics during walking", J. Biomech., vol. 47, pp. 2693-2699. [DOI] footgaitmethods
2014 Li J, Redmond AC, Jin Z, Fisher J, Stone MH, Stewart TD (2014), "Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing", Clin. Biomech. , vol. 29, pp. 747-751. [DOI] orthopedicship
2014 Li L, Ji Z, Xia Y, Gong R (2014), "Application of Inertial Navigation System in Portable Human Body Joint Power Test System", In: 2014 International Conference on Identification, Information and Knowledge in the Internet of Things, pp. 111-116. [DOIWWW] upper extremitymethods
2014 Li T, Liu T, Li G, Tao W, Inoue Y, Yi J (2014), "A novel parallel mechanism designed for walking assistance", In: 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO 2014), pp. 980-985. [DOI] exoskeletonfootgaitrehab
2014 Marek C, Siebertz K (2014), "Ergonomics for Passenger Cars", Book Chapter, In: Encyclopedia of Automotive Engineering, pp. 1-24. [DOI] automotive
2014 Mirakhorlo M, Azghani MR, Kahrizi S (2014), "Validation of a musculoskeletal model of lifting and its application for biomechanical evaluation of lifting techniques", J. Res. Health Sci., vol. 14, pp. 23-28. [WWW] work place ergonomicslower extremityvalidation
2014 N.Quirk, Baker M, Epari D (2014), "Force reaction analysis of lower limbs during common netball motions; a musculoskeletal modeling approach", In: Australian Biomedical Engineering Conference 2014, Canberra, Australia, 20 - 22 August 2014. [WWW] sportsknee
2014 Nakashima M, Mori Y (2014), "Effect of mechanical unbalance induced by pregnancy on the muscle load of the erector spinae during a sit-to-stand motion", Journal of Biomechanical Science and Engineering, vol. 9, pp. 14-00035-14-00035. [DOI] spine
2014 Olesen CG, de Zee M, Rasmussen J (2014), "Comparison between a Computational Seated Human Model and Experimental Verification Data", Appl. Bionics Biomech., vol. 11, pp. 175-183. [DOIWWW] seatingvalidation
2014 Pellikaan P, van der Krogt MM, Carbone V, Fluit R, Vigneron LM, Van Deun J, Verdonschot N, Koopman HF (2014), "Evaluation of a morphing based method to estimate muscle attachment sites of the lower extremity", J. Biomech., vol. 47, pp. 1144-1150. [DOI] lower extremitymethods
2014 Phillips CW, Forrester AI, Hudson DA, Turnock SR (2014), "Comparison of Kinematic Acquisition Methods for Musculoskeletal Analysis of Underwater Flykick", Procedia Engineering, vol. 72, pp. 56-61. [DOIWWW] sportsmethods
2014 Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2014), "Strengths and limitations of a musculoskeletal model for an analysis of simulated meat cutting tasks", Appl. Ergon., vol. 45, pp. 592-600. [DOI] work place ergonomicsupper extremityshouldervalidation
2014 Rasmussen J, Andersen MS, Al-Munajjed AA, Upmann A (2014), "H-point simulation in musculoskeletal models of seating", 3rd International Digital Human Modeling Symposium (DHM2014), May 20-22, 2014, Tokyo, Japan. [WWW] automotiveseatingmethods
2014 Rasmussen S, Rasmussen J (2014), "A Computational Investigation Of Minimal Invasive Spine Surgery", In: 15th EFORT Congress 2014. [PDFWWW] orthopedicsspine
2014 Sanford BA, Williams JL, Zucker-Levin AR, Mihalko WM (2014), "Hip, Knee, and Ankle Joint Forces in Healthy Weight, Overweight, and Obese Individuals During Walking", Book Chapter, In: Computational Biomechanics for Medicine, pp. 101-111. [DOIWWW] lower extremitygait
2014 Schiehlen W (2014), "Human walking dynamics: modeling, identification and control", MATEC Web of Conferences, vol. 16, pp. 05008. [DOIWWW] gait
2014 Schwarze M, Hurschler C, Seehaus F, Correa T, Welke B (2014), "Influence of transfemoral amputation length on resulting loads at the osseointegrated prosthesis fixation during walking and falling", Clin. Biomech. , vol. 29, pp. 272-276. [DOI] lower extremitygaitrehab
2014 Seo JW, Kang DW, Kim JY, Yang ST, Kim DH, Choi JS, Tack GR (2014), "Finite element analysis of the femur during stance phase of gait based on musculoskeletal model simulation", Biomed. Mater. Eng., vol. 24, pp. 2485-2493. [DOI] lower extremitygaitFEAvalidation
2014 Shingo Sakurai, Kazunori Hase, Ryusuke Arai, Yutaka Muraki, Hidenori Horita, Takeshi Rakumatsu (2014), "20211 Biomechanical Analysis of Entering and Exiting Motions of Automobile Using a Musculoskeletal Model", In: The Proceedings of Conference of Kanto Branch. [DOI] automotive
2014 Sins L (2014), "Étude expérimentale et numérique dárthroplasties totales anatomiques de lé́paule [Experimental and numerical study of anatomical total joint replacement of the shoulder]", Thesis, ÉTS - École de Technologie Supérieure, Montréal, Canada. [PDFWWW] orthopedicsshoulder
2014 Skals S, Rasmussen K, Bendtsen K, Andersen MS (2014), "Validation of musculoskeletal models driven by dual Microsoft Kinect Sensor data", In: 13th International Symposium on 3D Analysis of Human Movement, Lausanne, Switzerland, pp. 14-17. [PDFWWW] upper extremitylower extremitygaitmethods
2014 Stoltze JS (2014), "Development of a workflow for wear and functional simulation of total knee replacements", Thesis, Aalborg University, Denmark. [PDFWWW] orthopedicskneeFEA
2014 Weber T, Al-Munajjed AA, Verkerke GJ, Dendorfer S, Renkawitz T (2014), "Influence of minimally invasive total hip replacement on hip reaction forces and their orientations", J. Orthop. Res., vol. 32, pp. 1680-1687. [DOI] orthopedicship
2014 Wibawa AD (2014), "Lower limb musculoskeletal modeling during normal walking, one-legged forward hopping, side jumping and knee flexion: A Validation study of the AnyBody Modeling System for optimizing anterior cruciate ligament reconstruction", Thesis, University of Groningen, the Netherlands. [WWW] orthopedicskneevalidation
2014 Witkowski M, Sitnik R, Verdonschot N (2014), "Recent improvements in SPE3D: a VR-based surgery planning environment", In: Dolinsky M, McDowall IE (Ed): The Engineering Reality of Virtual Reality 2014, pp. 90120E. [DOIWWW] orthopedicshipmethods
2014 Wu JZ, Sinsel EW, Shroyer JF, Warren CM, Welcome DE, Zhao KD, An KN, Buczek FL (2014), "Analysis of the musculoskeletal loading of the thumb during pipetting--a pilot study", J. Biomech., vol. 47, pp. 392-399. [DOI] work place ergonomicshandupper extremity
2014 van Drongelen S, Wolf SI, Fradet L (2014), "Muscle load in reaching movements performed by a wheelchair user: a case study", Disabil. Rehabil., vol. 36, pp. 1133-1138. [DOI] shouldervalidationrehab
2013 Abdullah E, Fareez M, Jamaludin MS, Notomi M, Rasmussen J, Others (2013), "Musculoskeletal Analysis of Driving Fatigue: The Influence of Seat Adjustments", In: Advanced Engineering Forum, pp. 373-378. [PDFDOIWWW] automotiveseating
2013 Andersen MS, Yang J, de Zee M, Zhou L, Bai S, Rasmussen J (2013), "Full-body musculoskeletal modeling using dual Microsoft Kinect sensors and the Anybody Modeling System", TGCS 2013 Symposium, August 2013 Natal, Brazil. [WWW] methods
2013 Buchner E (2013), "Analyse der Ergonomie beim Einstieg in ein Fahrzeug - teil 2 [Analysis of ergonomics when entering a vehicle - part 2]", Thesis, Fachhochschule Technikum Wien, Austria. automotive
2013 Cadova M (2013), "Use of OpenSim and AnyBody modelling software for dynamic simulation of the human masticatory system", 18th International Symposium on Computational Biomechanics in Ulm CBU 2013. [PDF] mandible
2013 Cao E, Inoue Y, Liu T, Shibata K (2013), "An Inverse Dynamic Approach for Quantitative Muscle Force Estimation during Human Standing-Up Process", Journal of Biomechanical Science and Engineering, vol. 8, pp. 63-78. [DOI] lower extremityvalidationrehab
2013 Carbone V, Van der Krogt MM, Koopman BF, Verdonschot N (2013), "Subject-specific musculo-tendon parameters based on MRI and dynamometer tests", Gait Posture, vol. 38, pp. S4. [PDFDOIWWW] lower extremitykneemethodsvalidation
2013 Cassidy K, Hangalur G, Sabharwal P, Chandrashekar N (2013), "Combined in vivo/in vitro method to study anteriomedial bundle strain in the anterior cruciate ligament using a dynamic knee simulator", J. Biomech. Eng., vol. 135, pp. 35001. [DOI] kneevalidation
2013 Chen S, Andersen MS, Rasmussen J, Tang W (2013), "The effect of muscle setting on kinetics of upper extremity in a baseball pitching modeling: A case study", In: ISBS-Conference Proceedings Archive. [WWW] sportsupper extremity
2013 Cronskar M, Backstrom M (2013), "Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input", Modelling in Medicine and Biology X, vol. 17, pp. 235. [WWW] orthopedicsupper extremityFEA
2013 Doran ER (2013), "Effects of combining of upper and lower body resistance training on lumbar loading", Thesis, Oregon State University. [PDFWWW] orthopedicsspine
2013 Essers JM, Meijer K, Murgia A, Bergsma A, Verstegen P (2013), "An inverse dynamic analysis on the influence of upper limb gravity compensation during reaching", IEEE Int. Conf. Rehabil. Robot., vol. 2013, pp. 6650368. [DOI] exoskeletonupper extremityrehab
2013 Galloway F, Kahnt M, Ramm H, Worsley P, Zachow S, Nair P, Taylor M (2013), "A large scale finite element study of a cementless osseointegrated tibial tray", J. Biomech., vol. 46, pp. 1900-1906. [DOI] orthopedicskneeFEA
2013 Guenzkofer F, Bubb H, Bengler K (2013), "The validity of maximum force predictions based on single-joint torque measurements", The 2nd International Digital Human Modeling Symposium, Ann Arbor June 11-13, 2013. [PDFWWW] upper extremitymethods
2013 Haberly GJ (2013), "Hip Loading During the Squat Exercise", Thesis, Oregon State University. orthopedicship
2013 Hajihoseinali M, Nickpour H, Arjmand N, Farahmand F (2013), "Effect of considering stability requirements on antagonistic muscle activities using a musculoskeletal model of the human lumbar spine", In: 2013 20th Iranian Conference on Biomedical Engineering (ICBME), pp. 260-264. [DOI] spineFEA
2013 Han KS, Kim K, Park WM, Lim DS, Kim YH (2013), "Effect of centers of rotation on spinal loads and muscle forces in total disk replacement of lumbar spine", Proc. Inst. Mech. Eng. H, vol. 227, pp. 543-550. [DOI] orthopedicsspine
2013 Han KS, Kim YH, Kim K (2013), "Alteration of ligament stiffness can change the spine muscle coordination in flexed positions", 2013 ORS Annual Meeting, San Antonio, TX. [PDFWWW] spine
2013 Han KS, Rohlmann A, Zander T, Taylor WR (2013), "Lumbar spinal loads vary with body height and weight", Med. Eng. Phys., vol. 35, pp. 969-977. [DOI] orthopedicsspine
2013 Hess S (2013), "Modelling and analysis of an impulse stimulated human body by a hand-guided power tool", Thesis, Karlsruhe Institute of Technology. [PDFWWW] work place ergonomicsupper extremity
2013 Holmberg LJ, Lund Ohlsson M, Supej M, Holmberg HC (2013), "Skiing efficiency versus performance in double-poling ergometry", Comput. Methods Biomech. Biomed. Engin., vol. 16, pp. 987-992. [DOI] sports
2013 Jackson M, Sylvestre É, Bleau J, Allard P, Begon M (2013), "Estimating optimal shoulder immobilization postures following surgical repair of massive rotator cuff tears", J. Biomech., vol. 46, pp. 179-182. [DOI] orthopedicsshoulderrehab
2013 Jun SK, Zhou X, Ramsey DK, Krovi VN (2013), "A Comparative Study of Human Motion Capture and Analysis Tools", The 2nd International Digital Human Modeling Symposium, Ann Arbor, MI. [PDFWWW] lower extremitymethods
2013 Jun SK, Zhou X, Ramsey DK, Krovi VN (2013), "Kinetostatic Design-Refinement of Articulated Knee Braces", In: Proceedings of the ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013 August 4-7, 2013, Portland, OR. [PDF] exoskeletonkneemethodsrehab
2013 Jung M, Damsgaard M, Andersen MS, Rasmussen J (2013), "Integrating Biomechanical Manikins into a CAD Environment", 2nd International Digital Human Modeling Symposium, Michigan Ann Arbor. [PDF] methods
2013 Jung Y, Jung M, Lee K, Koo S (2013), "Estimating Knee Adduction Moment From Joint Kinematics Using Musculoskeletal Simulation With Conditional Reaction Elements", ORS 2013 Annual Meeting, San Antonio, TX. [PDF] kneevalidation
2013 Koblauch H, Bern SH, Brauer C, Mikkelsen S, de Zee M, Thygesen LC, Helweg-Larsen K, Alkjær T, Andersen MS, Simonsen EB (2013), "Lumbar Load in Common Work Tasks for Airport Baggage Handlers – A 3D Dynamic Analysis", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW] aerospacework place ergonomicsspine
2013 Kulcsar RM, Borozan IS, Argesanu V, Madaras L (2013), "Car Seats Ergonomic Evaluation", Int. J. Eng.. [WWW] automotivespinelower extremityseatingvalidation
2013 Lemieux PO (2013), "Analyse numérique des paramètres biomécaniques influencant la fonction de l’épaule atteinte d’arthropathie de rupture de coiffe [Numerical analysis of biomechanical parameters that Influence shoulder function in case of cuff tear arthropathy]", Ph.D. Thesis, L’école de technologie supérieure, Montréal, Canada. [PDF] orthopedicsshoulder
2013 Lemieux PO, Hagemeister N, Tétreault P, Nuño N (2013), "Influence of the medial offset of the proximal humerus on the glenohumeral destabilising forces during arm elevation: a numerical sensitivity study", Comput. Methods Biomech. Biomed. Engin., vol. 16, pp. 103-111. [DOI] orthopedicsshouldersensitivity analysis
2013 Lemieux PO, Tétreault P, Hagemeister N, Nuño N (2013), "Influence of prosthetic humeral head size and medial offset on the mechanics of the shoulder with cuff tear arthropathy: a numerical study", J. Biomech., vol. 46, pp. 806-812. [DOI] orthopedicsshoulder
2013 Lenar J, Witkowski M, Carbone V, Kolk S, Adamczyk M, Sitnik R, van der Krogt M, Verdonschot N (2013), "Lower body kinematics evaluation based on a multidirectional four-dimensional structured light measurement", J. Biomed. Opt., vol. 18, pp. 56014. [DOI] lower extremitygaitmethods
2013 Mellon SJ, Grammatopoulos G, Andersen MS, Pegg EC, Pandit HG, Murray DW, Gill HS (2013), "Individual motion patterns during gait and sit-to-stand contribute to edge-loading risk in metal-on-metal hip resurfacing", Proc. Inst. Mech. Eng. H, vol. 227, pp. 799-810. [DOI] orthopedicshipgait
2013 Motomu NAKASHIMA, Takahiro HASEGAWA, Akihiro MATSUDA, Takatsugu SHIMANA (2013), "3d-cg based musculoskeletal analysis for a swimmer attaching competitive swimwear", . [DOI] sports
2013 Nakashima M, Hasegawa T, Kamiya S, Takagi H (2013), "Musculoskeletal Simulation of the Breaststroke", Journal of Biomechanical Science and Engineering, pp. 13-136. [DOIWWW] sportsupper extremitylower extremityvalidation
2013 Nakashima M, Hasegawa T, Matsuda A, Shimana T, Omori K (2013), "3D-CG Based Musculoskeletal Simulation for a Swimmer Wearing Competitive Swimwear", Procedia Engineering, vol. 60, pp. 367-372. [DOIWWW] sportsvalidation
2013 Nimbarte AD, Sivak-Callcott JA, Zreiqat M, Chapman M (2013), "Neck Postures and Cervical Spine Loading Among Microsurgeons Operating with Loupes and Headlamp", IIE Transactions on Occupational Ergonomics and Human Factors, vol. 1, pp. 215-223. [DOI] orthopedicswork place ergonomicsspine
2013 Nimbarte AD, Sun Y, Jaridi M, Hsiao H (2013), "Biomechanical loading of the shoulder complex and lumbosacral joints during dynamic cart pushing task", Appl. Ergon., vol. 44, pp. 841-849. [DOI] work place ergonomicsshoulderspinevalidation
2013 Nolte D, Andersen MS, Rasmussen J, Al-Munajjed A (2013), "Development of a patient-specific musculoskeletal model of a healthy knee to analyze hard and soft tissue loading", In: 21st Annual Symposium on Computational Methods in Orthopaedic Biomechanics. [PDF] knee
2013 Oliveira AS, Silva PB, Lund ME, Gizzi L, Farina D, Kersting UG (2013), "Effects of perturbations to balance on neuromechanics of fast changes in direction during locomotion", PLoS One, vol. 8, pp. e59029. [DOI] rehab
2013 Oliveira AS, Silva PB, Lund ME, Kersting UG, Farina D (2013), "Fast changes in direction during human locomotion are executed by impulsive activation of motor modules", Neuroscience, vol. 228, pp. 283-293. [DOI] lower extremity
2013 Petrella A, Rasmussen J, Al Munajjed A, Damsgaard M, Lund M, Kiis A (2013), "How Good is Good Enough? Lessons in Musculoskeletal Model Validation With the Anybody Modeling System", In: ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, pp. V001T04A002-V001T04A002. [DOIWWW] validation
2013 Sanford BA, Williams JL, Zucker-Levin AR, Mihalko WM (2013), "Tibiofemoral Joint Forces during the Stance Phase of Gait after ACL Reconstruction", OJBIPHY, vol. 03, pp. 277-284. [DOIWWW] orthopedicskneegaitrehab
2013 Schwarze M, Hurschler C, Seehaus F, Oehler S, Welke B (2013), "Loads on the prosthesis-socket interface of above-knee amputees during normal gait: validation of a multi-body simulation", J. Biomech., vol. 46, pp. 1201-1206. [DOI] lower extremitygaitvalidationrehab
2013 Song WK, Ko BW, Lee J (2013), "Dynamics analysis of upper-extremity motions of stroke survivors during reaching tasks at different levels", In: 2013 IEEE RO-MAN, pp. 13-18. [DOI] upper extremityrehab
2013 Tsuge Y, Ohshima S (2013), "Musculoskeletal model for exercise skill optimization", . sports
2013 Ulrey BL, Fathallah FA (2013), "Subject-specific, whole-body models of the stooped posture with a personal weight transfer device", J. Electromyogr. Kinesiol., vol. 23, pp. 206-215. [DOI] exoskeletonwork place ergonomicsspinelower extremityvalidation
2013 Vanheule V, Andersen MS, Wirix-Speetjens R, Jonkers I, Victor J, Sloten JV (2013), "Modeling of Patient-Specific Knee Kinematics and Ligament Behavior Using Force-Dependent Kinematics", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW] knee
2013 Wagner DW, Stepanyan V, Shippen JM, Demers MS, Gibbons RS, Andrews BJ, Creasey GH, Beaupre GS (2013), "Consistency among musculoskeletal models: caveat utilitor", Ann. Biomed. Eng., vol. 41, pp. 1787-1799. [DOI] methods
2013 Welke B, Schwarze M, Hurschler C, Calliess T, Seehaus F (2013), "Multi-body simulation of various falling scenarios for determining resulting loads at the prosthesis interface of transfemoral amputees with osseointegrated fixation", J. Orthop. Res., vol. 31, pp. 1123-1129. [DOI] lower extremityrehab
2013 Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ (2013), "Lower Limb Musculoskeletal Model Validation during One Legged Forward Hopping and Side Jumping in Healthy Subjects Using EMG", In: HCI International 2013 - Posters’ Extended Abstracts, pp. 557-560. [DOIWWW] lower extremityvalidation
2013 Worsley P, Stokes M, Barrett D, Taylor M (2013), "Joint loading asymmetries in knee replacement patients observed both pre- and six months post-operation", Clin. Biomech. , vol. 28, pp. 892-897. [DOI] orthopedicsknee
2013 Wu JZ, Sinsel EW, Shroyer JF, Welcome DE, Zhao KD, An KN, Buczek FL (2013), "The musculoskeletal loading profile of the thumb during pipetting based on tendon displacement", Med. Eng. Phys., vol. 35, pp. 1801-1810. [DOI] work place ergonomicshandupper extremity
2013 Wyss C, Brunner R (2013), "Determination of reaction forces and moments in the foot joints using multibody dynamics and Fe analysis—A clinical application", Gait Posture, vol. 38, pp. S108-S109. [PDFDOIWWW] footgaitFEA
2013 Yang M, Xu Z, Liu Y, He Y, Xu Y (2013), "Perceiving and predicting the intended motion with human-machine interaction force for walking assistive exoskeleton robot", In: 2013 IEEE International Conference on Mechatronics and Automation, pp. 805-810. [DOI] exoskeletonlower extremityrehab
2013 Yang Z, Zheng Y, Fu S (2013), "Simulation of Pushing the Push-Pull Rod Action Based on Human Body Dynamics", In: Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, pp. 393-401. [DOIWWW] aerospacework place ergonomicsupper extremity
2013 Zhang J, Zhou R, Li J, Ding L, Wang L (2013), "Optimization for Lunar Mission Training Scheme Based on AnyBody Software", In: Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, pp. 169-178. [DOIWWW] aerospaceupper extremityvalidation
2013 Zhou L, Bai S, Andersen MS, Rasmussen J (2013), "Design and optimization of a spring-loaded cable-driven robotic exoskeleton", Proceedings of the 25th Nordic Seminar on Computational Mechanics, pp. 205-208. [PDF] exoskeletonshoulderrehab
2013 Zhu R, Zander T, Dreischarf M, Duda GN, Rohlmann A, Schmidt H (2013), "Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses", J. Biomech., vol. 46, pp. 1376-1378. [DOI] spineFEA
2012 Ahmed S, Babski-Reeves K (2012), "Assessment of Upper Extremity Postures in Novice and Expert during Simulated Carpentry Tasks", Human Factors and Ergonomics Society 56th Annual Meeting. work place ergonomicsupper extremity
2012 Alkjaer T, Wieland MR, Andersen MS, Simonsen EB, Rasmussen J (2012), "Computational modeling of a forward lunge: towards a better understanding of the function of the cruciate ligaments", J. Anat., vol. 221, pp. 590-597. [DOI] knee
2012 Andersen MS, Damsgaard M, Rasmussen J, Ramsey DK, Benoit DL (2012), "A linear soft tissue artefact model for human movement analysis: proof of concept using in vivo data", Gait Posture, vol. 35, pp. 606-611. [DOI] gaitmethods
2012 Andersen MS, Mellon S, Lund ME, Grammatopoulos G, Gill HS (2012), "The effect of including accurate pelvis bony landmarks in a nonlinearly scaled musculoskeletal lower extremity model", International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy. [PDF] orthopedicshipgaitmethods
2012 Andersen MS, Rasmussen J, Damsgaard M (2012), "Letter to the Editor", J. Theor. Biol., vol. 298 , pp. 154-155. methods
2012 Böhme J, Shim V, Höch A, Mütze M, Müller C, Josten C (2012), "Clinical implementation of finite element models in pelvic ring surgery for prediction of implant behavior: a case report", Clin. Biomech. , vol. 27, pp. 872-878. [DOI] orthopedicshipFEA
2012 Cao E, Inoue Y, Liu T, Shibata K (2012), "Estimation of lower limb muscle forces during human sit-to-stand process with a rehabilitation training system", In: Proceedings of 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics, pp. 1016-1019. [DOI] lower extremityvalidationrehab
2012 Cao E, Inoue Y, Liu T, Shibata K (2012), "Muscle Force Analysis of Human Foot Based on Wearable Sensors and EMG Method", Book Chapter, In: EMG Methods for Evaluating Muscle and Nerve Function. [WWW] footgaitvalidation
2012 Carbone V, van der Krogt MM, Koopman HF, Verdonschot N (2012), "Sensitivity of subject-specific models to errors in musculo-skeletal geometry", J. Biomech., vol. 45, pp. 2476-2480. [DOI] lower extremity
2012 Cho K, Kim Y, Yi D, Jung M, Lee K (2012), "Analysis and evaluation of a combined human - exoskeleton model under two different constraints condition", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF] exoskeletonrehab
2012 D’Souza S, Rasmussen J, Schwirtz A (2012), "Multiple linear regression to develop strength scaled equations for knee and elbow joints based on age, gender and segment mass", International Journal of Human Factors Modelling and Simulation, vol. 3, pp. 32-47. [WWW] methods
2012 Engstler F (2012), "Perzentilierung maximaler Gelenkmomente des Menschen [Maximum joint moment percentiles for man]", Thesis, Technischen Universität München. [PDFWWW] methods
2012 Eschweiler J, Fieten L, Dell'Anna J, Kabir K, Gravius S, Tingart M, Radermacher K (2012), "Application and evaluation of biomechanical models and scores for the planning of total hip arthroplasty", Proc. Inst. Mech. Eng. H, vol. 226, pp. 955-967. [DOI] orthopedicshipvalidation
2012 Fluit R, van der Krogt MM, van der Kooij H, Verdonschot N, Koopman HF (2012), "A simple controller for the prediction of three-dimensional gait", J. Biomech., vol. 45, pp. 2610-2617. [DOI] orthopedicsgait
2012 Galloway F, Worsley P, Stokes M, Nair P, Taylor M (2012), "Development of a statistical model of knee kinetics for applications in pre-clinical testing", J. Biomech., vol. 45, pp. 191-195. [DOI] kneegaitmethods
2012 Grammatopoulos G, Mellon S, Andersen MS, Pandit H, Gundle R, McLardy-Smith P, Murray D, Gill H (2012), "Why dont́ all malpositioned resurfaced cups have high wear? - A dynamic, gait lab study", In: Journal of Bone and Joint Surgery. British Volume. Orthopaedic Proceedings. orthopedicshipgait
2012 Han KS, Rohlmann A, Kim K, Cho KW, Kim YH (2012), "Effect of ligament stiffness on spinal loads and muscle forces in flexed positions", Int. J. Precis. Eng. Manuf., vol. 13, pp. 2233-2238. [DOIWWW] spine
2012 Han KS, Zander T, Taylor WR, Rohlmann A (2012), "An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces", Med. Eng. Phys., vol. 34, pp. 709-716. [DOI] spinevalidation
2012 Holmberg JL (2012), "Musculoskeletal Biomechanics in Cross-country Skiing", Thesis, Linköping University, Sweden. [WWW] sportsmethods
2012 Holmberg LJ, Ohlsson ML, Danvind J (2012), "Musculoskeletal simulations: a complementary tool for classification of athletes with physical impairments", Prosthet. Orthot. Int., vol. 36, pp. 396-397. [DOI] sportsmethods
2012 Joakim Holmberg L, Klarbring A (2012), "Muscle decomposition and recruitment criteria influence muscle force estimates", Multibody Syst. Dyn., vol. 28, pp. 283-289. [DOIWWW] methods
2012 Jung Y, Jung M, Lee K, Koo S (2012), "Ground Reaction Force Estimation Using Musculoskeletal Simulation", 30th Conference of the International Society of Biomechanics in Sport, ISBS2012, Melbourne, Australia. [PDF] footgaitmethodsvalidation
2012 Kersting UG (2012), "Implications of subtalar joint motion for muscle and joint loading during running", In: Journal of Foot and Ankle Research. sportsanklefoot
2012 Kim T, Lee K, Kwon J (2012), "Design improvement of the smith machine using simulation on musculoskeletal model", International Journal of CAD/CAM, vol. 12. [WWW] sportslower extremityvalidation
2012 Koning BH, der Krogt MM, Baten CT, Koopman HF (2012), "Kinematics of a musculoskeletal model using inertial and magnetic measurement units", 12th International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy, 18th to 20th July 2012. [PDFWWW] lower extremitymethods
2012 Kulcsar RM, Madaras L, Maniu I, Borozan IS, Argesanu V (2012), "Ergonomic Study Regarding the Effects of the Inertia and Centrifugal Forces on the Driver", Ammonia Plant Saf. Relat. Facil, vol. 162, pp. 84-91. [DOIWWW] automotive
2012 Kunze M, Schaller A, Steinke H, Scholz R, Voigt C (2012), "Combined multi-body and finite element investigation of the effect of the seat height on acetabular implant stability during the activity of getting up", Comput. Methods Programs Biomed., vol. 105, pp. 175-182. [DOI] orthopedicshipseatingFEA
2012 Kunze M, Voigt C, Strauss G, Scholz R, Fischer M (2012), "Comparison of multi-body simulations and EMG measurements on the M. deltoideus acromialis", Cameroon J. Agric. Sci., vol. 1 . [WWW] shouldervalidation
2012 Lemieux PO, Nuño N, Hagemeister N, Tétreault P (2012), "Mechanical analysis of cuff tear arthropathy during multiplanar elevation with the AnyBody shoulder model", Clin. Biomech. , vol. 27, pp. 801-806. [DOI] shoulder
2012 Lund ME, de Zee M, Andersen MS, Rasmussen J (2012), "On validation of multibody musculoskeletal models", Proc. Inst. Mech. Eng. H, vol. 226, pp. 82-94. [DOI] methodsvalidation
2012 Mellon S, Andersen MS, Grammatopoulos G, Gill H (2012), "Mal-positioning alone does not necessarily lead to increased wear in metal-on-metal hip resurfacing", Proceedings of the ORS 2012 annual meeting. [PDF] orthopedicshipgait
2012 Nakashima M, Maeda S, Miwa T, Ichikawa H (2012), "Optimizing Simulation of the Arm Stroke in Crawl Swimming Considering Muscle Strength Characteristics of Athlete Swimmers", Journal of Biomechanical Science and Engineering, vol. 7, pp. 102-117. [DOI] sports
2012 Olesen CG (2012), "The Influence of Sitting Conditions on Soft Tissue Loads", Thesis, Aalborg University, Denmark. [PDF] seatingmethodsvalidationrehab
2012 Oomen PW, Drost MR, van Rhijn LW, Meijer K (2012), "Is Strength Scaling Sufficient for the Development of Personalized Multi Body Models?", 20th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, February 3, 2012 University of California Berkeley, Berkeley, California. [PDF] methods
2012 Rackl M (2012), "Patient-Specific Modelling of Fractures of the Lower Jaw with FEA and Musculoskeletal Simulation", Thesis, Fachhochschule Regensburg, Germany. [PDF] orthopedicsmandibleFEA
2012 Rashedi E, Jia B, Nussbaum MA, Lockhart TE (2012), "Investigating the effects of slipping on lumbar muscle activity, kinematics, and kinetics", Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 56, pp. 1201-1205. [DOI] work place ergonomicsspinegait
2012 Rasmussen J, Boocock M, Paul G (2012), "Advanced musculoskeletal simulation as an ergonomic design method", A Journal of Prevention, Assessment and Rehabilitation, vol. 41 , pp. 6107-6111. [DOI] work place ergonomics
2012 Rasmussen J, Holmberg J, Sørensen K, Kwan MM, Andersen MS, de Zee M, Holmberg LJ, Sørensen K, Kwan MM, Andersen MS, de Zee M (2012), "Performance optimization by musculoskeletal simulation", Movement & Sport Sciences, Science & Motricite, vol. 1, pp. 73-83. [DOI] sports
2012 Ribeiro A, Rasmussen J, Flores P, Silva LF (2012), "Modeling of the condyle elements within a biomechanical knee model", Multibody Syst. Dyn., vol. 28, pp. 181-197. [DOIWWW] knee
2012 Sheen DP, Lee D, Lee S, Sohn R, Ko BW, Song WK, Lee K (2012), "An Upper Limb Motion Analysis of Stroke Patients in Daily Activities Using a Musculoskeletal Model", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF] upper extremityvalidationrehab
2012 Voigt C, Kunze M, Fischer M, Strauss G, Steinke H, Klöhn C, Scholz R (2012), "Combined Multi-Body and Finite Element Simulation (AnyBody/ANSYS) – Examples of Application and Validation in Biomechanics", In: ANSYS Conference & 30th.CADFEM Users’ Meeting. [PDF] orthopedicsshoulderhipFEAvalidation
2012 Voinescu M, Soares DP, Natal Jorge RM, Davidescu A, Machado LJ (2012), "Estimation of the forces generated by the thigh muscles for transtibial amputee gait", J. Biomech., vol. 45, pp. 972-977. [DOI] lower extremitygaitvalidationrehab
2012 Weber T, Dendorfer S, Dullien S, Grifka J, Verkerke GJ, Renkawitz T (2012), "Measuring functional outcome after total hip replacement with subject-specific hip joint loading", Proc. Inst. Mech. Eng. H, vol. 226, pp. 939-946. [DOI] orthopedicship
2012 Weber T, Stezowski P, Dullien S, Dendorfer S (2012), "Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hueft-Totalendoprothese [A biomechanical evaluation of different load scenarios after implantation of a total hip replacement]", 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V. 25. - 27. Juli 2012, Regensburg, Germany. [PDF] orthopedicshipmethodsFEA
2012 Witkowski M, Lenar J, Sitnik R, Verdonschot N (2012), "A virtual reality interface for pre-planning of surgical operations based on a customized model of the patient", In: Proc. SPIE. [WWW] orthopedicshiplower extremity
2012 Wu JZ, Sinsel EW, Gloekler DS, Wimer BM, Zhao KD, An KN, Buczek FL (2012), "Inverse dynamic analysis of the biomechanics of the thumb while pipetting: a case study", Med. Eng. Phys., vol. 34, pp. 693-701. [DOI] work place ergonomicshandmethods
2012 Xiao-hong JI, Jun-bing MA, Ren-cheng WA, Fang PU, Fang SU (2012), "Effect of helmet mass and mass center on neck muscle strength in military pilots", Journal of Medical Biomechanics. [WWW] aerospacedefensework place ergonomicsspine
2012 Zhou L, Bai S, Rasmussen J (2012), "Biomechanical modeling of an assistive shoulder orthoses", AAL Forum 2012, 24-27 Sep 2012, Eindhoven, The Netherlands. [PDF] exoskeletonshoulderrehab
2012 Zhu C, Jin J, Sun Y, Zheng A (2012), "Simulation of Constant Resistance Knee Flexion Movement", Book Chapter, In: System Simulation and Scientific Computing, pp. 432-439. [DOIWWW] sportsknee
2012 van der Ploeg B, Tarala M, Homminga J, Janssen D, Buma P, Verdonschot N (2012), "Toward a more realistic prediction of peri-prosthetic micromotions", J. Orthop. Res., vol. 30, pp. 1147-1154. [DOI] orthopedicshiplower extremitygaitFEA
2011 Andersen MS, Damsgaard M, Rasmussen J (2011), "Force-dependent kinematics: a new analysis method for non-conforming joints", In: Presented at the 13th Biennial International Symposium on Computer Simulation in Biomechanics, pp. 2-2 pp.. [PDF] methods
2011 Andersen MS, Rasmussen J (2011), "Total knee replacement musculoskeletal model using a novel simulation method for non-conforming joints", Proceedings of the International Society of Biomechanics Conference. [PDF] kneegaitmethods
2011 Asfour S, Eltoukhy M (2011), "Development and Validation of a Three-Dimensional Biomechanical Model of the Lower Extremity", Book Chapter, In: Klika V (Ed): Theoretical Biomechanics, pp. 161-186. [PDFDOIWWW] lower extremityvalidation
2011 Bai S, Rasmussen J (2011), "Modelling of Physical Human-Robot Interaction for Exoskeleton Designs", In: ECCOMAS Thematic Conference: Multibody Dynamics 2011, Brussels, Belgium, pp. 6-6 pp.. [PDF] exoskeletonupper extremityrehab
2011 Bajelan S, Azghani MR (2011), "Musculoskeletal analysis of sit-to-stand maneuver in order to compare the various standing up strategies", In: 2011 18th Iranian Conference of Biomedical Engineering (ICBME), pp. 215-220. [DOI] hipkneerehab
2011 Cao E, Inoue Y, Liu T, Shibata K (2011), "Estimate Muscle Forces of Ankle Joint with Wearable Sensors", Journal of Biomechanical Science and Engineering, vol. 6, pp. 299-310. [DOI] footvalidation
2011 Cao X, Dong Z (2011), "Human measurement technology based on small sample and its application in human factors engineering", In: 2011 IEEE 18th International Conference on Industrial Engineering and Engineering Management, pp. 589-591. [DOIWWW] methods
2011 Farahani SD, de Zee M, Andersen MS, Lund ME, Rasmussen J (2011), "Prediction of the Movement Patterns for Human Squat Jumping using the Inverse-Inverse Dynamics Technique", XIII International Symposium on Computer Simulation in Biomechanics. [PDFWWW] lower extremitymethods
2011 Gadomski BC, Rasmussen J, Galibarov P, Puttlitz CM (2011), "The effect of coupled motions and lifting tasks on human lumbar nucleus pressures and annulus fibrosis stresses in a muscle-loaded finite element model", International Society for Biomechanics. [PDF] work place ergonomicsspineFEA
2011 Gadomski BC, Rasmussen J, Puttlitz CM (2011), "The effect of muscle loading on internal mechanical parameters of the lumbar spine: a finite element study", In: Proceedings of 2011 ASME Summer Bioengineering Conference, pp. 2-2 pp.. [PDFWWW] spineFEA
2011 Gadomski BC, Rasmussen J, Puttlitz CM (2011), "Implementation of Physiological Muscle Loading in a Finite Element Model of the Human Lumbar Spine", Transactions of the 57th annual meeting of the Orthopaedic Reasearch Society. [PDF] spineFEAvalidation
2011 Galibarov PE, Al-Munajjed AA, Dendorfer S, Christensen ST, Rasmussen J (2011), "The effect of varying the stiffness of spinal fusion devices on the adjacent levels using multibody dynamics simulation", In: ISTA, 24th annual congress, pp. 2-2 pp.. orthopedicsspine
2011 Galibarov PE, Dendorfer S, Christensen ST (2011), "On modelling spine curvature dependent on muscular and external forces in multibody dynamics system", In: Presented at the International Society of Biomechanics 13th congress, 2011, Brussels, Belgium, pp. 2-2 pp.. [PDF] spinemethods
2011 Galibarov PE, Dendorfer S, Rasmussen J (2011), "Two Computational Models of the Lumbar Spine: Comparison and Validation", Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA, vol. Marie Curi. [PDF] spinevalidation
2011 Grujicic A, LaBerge M, Xie X, Arakere G, Pandurangan B, Grujicic M, Jeray KJ, Tanner SL (2011), "Computational investigation of the relative efficacies of nail- and plate-type proximal femoral-fracture fixation implants", Multidiscipline Modeling in Materials and Structures, vol. 7, pp. 212-244. [WWW] orthopedicslower extremitymethodsFEA
2011 Hase RU (2011), "Development of a car-human-musculoskeletal integrated-dynamics model for driving posture assessment", In: The Proceedings of Mechanical Engineering Congress, Japan. automotive
2011 Hase ST (2011), "Development of Synthesizing Dynamics Model for Human Motion and Muscle Activity", In: The Proceedings of the Transportation and Logistics Conference. automotive
2011 Heinen F, Nedergaard NJ, Sloth S, Kersting U (2011), "The effect of medially and laterally wedged insoles on lateral ankle stability during sidestepping movements", Footwear Sci., vol. 3, pp. S73-S74. [DOI] anklefoot
2011 Heiner F, Nedergaard NJ, Sloth S (2011), "Effect of Crank-Axle Height and Crank Arm Length on Grinding Performance - A Computational Model Approach", . sportsvalidation
2011 Hopkins AR, Emmenegger D, Stroud L, Schärer C, Lovern B, Holt C, Seebeck J (2011), "Generation of subject specific shoulder kinematic models from motion capture data and AnyBody simulation", In: Presented at the International Soc. Biomechanics conference, 2011 Brussels. [PDF] shoulder
2011 Jia B, Kim S, Nussbaum MA (2011), "An EMG-based model to estimate lumbar muscle forces and spinal loads during complex, high-effort tasks: Development and application to residential construction using prefabricated walls", Int. J. Ind. Ergon., vol. 41, pp. 437-446. [DOIWWW] work place ergonomicsspinevalidation
2011 Jiang X (2011), "Biomechanical analysis of asymmetric and dynamic lifting task", Thesis, New Jersey Institute of Technology, NJ,United States. [WWW] work place ergonomics
2011 Juliussen RB (2011), "Udvikling af computermodel til analyse af roning [Development of computer model for analysis of rowing]", Thesis, Technical University of Denmark. [PDF] sportsvalidation
2011 Jung M, Kim Y, Cho K, Lee K (2011), "A novel method to predict posture of human model when designing resistance training machines using musculoskeletal analysis", In: Presented at the American Society of Biomechanics Meeting, Gainesville, FL, pp. 2-2 pp.. [PDF] sportsmethods
2011 Kaalund S, Faunø P, Olsen SS, Olesen CG (2011), "Pain Reduction by Using Insoles when Playing Soccer on Artificial Turf", .
2011 Kulcsar RM, Argesanu V, Borozan IS, Maniu I (2011), "The human body behavior under vehicle vibrations", In: Proceedings of the 13th WSEAS international conference on Automatic control, modelling & simulation, pp. 368-373. [WWW] automotiveseating
2011 Kwan MM, Andersen MS, Cheng CL, Tang WT, Rasmussen J (2011), "Investigation of high-speed badminton racket kinematics by motion capture", Sports Eng., vol. 13, pp. 57-63. sports
2011 Kwan MM, Rasmussen J (2011), "Linking Badminton Racket Design and Performance through Motion Capture", CAME - Computer Aided Medical Engineering, vol. 1 , pp. 13-19. [PDF] sports
2011 Lund ME, Andersen MS, de Zee M, Rasmussen J (2011), "Functional Scaling of Musculoskeletal Models", In: Presented at the XXIIIrd Congress of the International Society of Biomechanics, ISB 2011, 3-7 July 2011, Brussels, Belgium, pp. 2-2 pp.. [PDF] methodsvalidation
2011 Lund ME, de Zee M, Rasmussen J (2011), "Comparing calculated and measured curves in validation of musculoskeletal models", In: XIII International Symposium on Computer Simulation in Biomechanics, Leuven, Belgium, pp. 2-2 pp.. [PDF] methodsvalidation
2011 Madeleine P, Samani A, De M, Kersting U (2011), "Biomechanical Assessments in Sports and Ergonomics", Book Chapter, In: Klika V (Ed): Theoretical Biomechanics, pp. 335-360. [PDFDOIWWW] work place ergonomicssportsmethods
2011 Madeleine P, Samani A, de Zee M, Kersting UG (2011), "Biomechanics of human movement", International Federation for Medical and Biological Engineering Proceedings, vol. 34 , pp. 237-240. sports
2011 Moghadamab MN, Aminianb K, Asgharia M, Parnianpour M (2011), "How well do the muscular synergies extracted via non-negative matrix factorisation explain the variation of torque at shoulder joint?", Comput. Methods Biomech. Biomed. Engin., pp. 1-11. [DOIWWW] shouldermethods
2011 Olesen CG, Lund ME, Sloth S, Heinen F, Nedergaard NJ, de Zee M (2011), "Development of a musculoskeletal model for coffee-grinder design purposes", In: Pedersen KT, Søgaard K (Ed): 3. årsmøde i Dansk Biomekanisk Selskab, pp. 1-1 p.. [PDF] sportsvalidation
2011 Oosterwaal M, Telfer S, Tørholm S, Carbes S, van Rhijn LW, Macduff R, Meijer K, Woodburn J (2011), "Generation of subject-specific, dynamic, multisegment ankle and foot models to improve orthotic design: a feasibility study", BMC Musculoskelet. Disord., vol. 12, pp. 256. [DOI] anklefoot
2011 Paul G, Lee WC (2011), "Interfacing Jack and anybody : towards anthropometric musculoskeletal digital human modeling", , pp. 8-8 pp.. [WWW] methods
2011 Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2011), "Trend validation of a musculoskeletal model with a workstation design parameter", XIII International Symposium on Computer Simulation in Biomechanics. [PDF] upper extremityvalidation
2011 Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2011), "Meat Cutting Tasks Analysis Using 3D Instrumented Knife and Motion Capture", Book Chapter, In: 15th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics (NBC 2011), pp. 144-147. [DOIWWW] work place ergonomicsupper extremityspinevalidation
2011 Prajapati K, Barez F, Kao J, Wagner D (2011), "Dynamic Force Response of Human Legs due to Vertical Jumps", In: ASME 2011 International Mechanical Engineering Congress and Exposition, pp. 1-8. [DOIWWW] lower extremity
2011 Rasmussen J (2011), "Challenges in human body mechanics simulation", Procedia IUTAM, vol. 2, pp. 176-185. [DOIWWW] methods
2011 Rasmussen J, Bichler R, Tørholm S, Renkawitz T, Wirix-Speetjens R, Dendorfer S (2011), "Subject-specific Musculoskeletal Simulation of Hip Dislocation Risk in Activities of Daily Living", In: 57th annual meeting of the orthopaedic research Society. [PDF] orthopedicsautomotivehip
2011 Rasmussen J, Olesen CG, Lund ME, Andersen MS, Farahani SD, de Zee M (2011), "Prediction of motion in musculoskeletal models", XIII International Symposium on Computer Simulation in Biomechanics. [PDF] methods
2011 Ribeiro A, Rasmussen J, Flores P, Silva LF (2011), "Biomechanical multibody knee model with condyle contact: modeling, simulation and analysis", .
2011 Robie B, Dendorfer S, Rasmussen J, Tørholm S (2011), "Axial Rotation Requires Greatest Load in Multifidus Muscle - Potential Association with Low Back Pain?", 2011 Annual Meeting of the AANS/CNS Section on Disorders of the Spine and Peripheral Nerves, Phoenix, Arizona. [PDF] orthopedicsspine
2011 Rohlmann A, Han KS, Zander T, Taylor WR (2011), "A validated thoraco-lumbar spine model for prediction of muscle forces", Eurospine. [PDF] spinemethodsvalidation
2011 Rohner C (2011), "Berechnung der Kniedynamik beim Gehen durch Nutzung von experimentell ermittelter passiver Kniesteifigkeit und simulierten Muskelkräften (In German) [Calculation of knee-dynamics during walking using experimentally determined passive knee stiffness and si", Thesis, Zurich University of Applied Science, Switzerland. orthopedicsknee
2011 Sabharwal P (2011), "A combined in-vivo/in-vitro approach to study knee injury mechanism", Thesis, University of Waterloo, Canada. [WWW] knee
2011 Sandholm A, Schwartz C, Pronost N, de Zee M, Voigt M, Thalmann D (2011), "Evaluation of a geometry-based knee joint compared to a planar knee joint", Vis. Comput., vol. 27, pp. 161-171. [DOIWWW] kneegait
2011 Schwarze M, Welke B, Seehaus F, Oehler S, Hurscheler C (2011), "Validation of an inverse dynamic model: Loads at the prosthesis interface of above-knee amputees", In: Poster presented at the DGfB, 19-21 May 2011, Murnau (Germany),, pp. 1-1 p.. [PDF] lower extremitygaitvalidationrehab
2011 Schwarze M, Welke B, Seehaus F, Schmalz T, Hurschler C (2011), "Stress Resultants in Proximal Femur of Transfemural Amputees During Different Cases of Falling: A Multi-Body Simulation", , pp. 1-1 p.. [PDF] lower extremitygaitrehab
2011 Sun Y, Moore C, Nimbarte A (2011), "Musculoskeletal Loading During Dynamic Two-Wheeled Cart Pushing and Pulling", IIE Annual Conference.. [WWW] work place ergonomicsshoulderspine
2011 Sørensen K, de Zee M, Rasmussen J (2011), "A biomechanical analysis of clear strokes in badminton executed by youth players of different skill levels", Proceedings of the International Society of Biomechanics Conference 2011 Brussels. [PDF] sports
2011 Taylor PR, Day RE, Nicholls RL, Rasmussen J, Yates PJ, Stoffel KK (2011), "The comminuted midshaft clavicle fracture: a biomechanical evaluation of plating methods", Clin. Biomech. , vol. 26, pp. 491-496. [DOI] orthopedicsupper extremitytrunk
2011 Toh JJ, Kin L, Xie W (2011), "Investigation of the Moment of Inertia and the Biomechanical Internal Forces Acting on the Knee During Hiking", Portuguese Journal of Sport Sciences, vol. 11 . [PDF] sportsknee
2011 Voinescu M, Soares D, Castro M, Mendes E, Davidescu A, Machado L (2011), "A study of moments acting on the tibia during gait in the active elderly population", Portuguese Journal of Sport Sciences, vol. 11 (Suppl., pp. 575-578. [PDF] orthopedicssportslower extremitygait
2011 Wong C (2011), "The Influence of Muscle Forces on the Stress Distribution in the Lumbar Spine", TOSPINEJ, vol. 3, pp. 21-26. [DOIWWW] spineFEA
2011 Worsley P (2011), "Assessment of short-term knee arthroplasty function using clinical measures, motion analysis, and musculoskeletal modelling", Thesis, University of Southampton. [WWW] orthopedicskneegaitmethodsvalidation
2011 Worsley P, Stokes M, Taylor M (2011), "Predicted knee kinematics and kinetics during functional activities using motion capture and musculoskeletal modelling in healthy older people", Gait Posture, vol. 33, pp. 268-273. [DOI] kneeleggait
2011 Wu JZ, Sinsel E, Gloekler D, Wimer B, Zhao K, An KN, Buczek F (2011), "Joint loading of the thumb while operating a mechanical pipette - an inverse dynamics approach", In: ASB, pp. 2-2 pp.. [PDF] work place ergonomicshand
2011 Zander T, Rohlmann A, Dreischarf M, Han KS, Bergmann G (2011), "Impact of the Number of Artificial Discs on Spinal Balance", EuroSpine. [PDF] orthopedicsspine
2011 Zhou L, Bai S, Hansen MR, Rasmussen J (2011), "odeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories", MIC, vol. 32, pp. 91-101. [DOIWWW] upper extremitymethodsvalidation
2011 binti Abdul Majid NA (2011), "Musculoskeletal analysis of driving fatigue: The influence of seat condition", Thesis, Meiji University, Japan. [PDF] automotiveupper extremityspinelower extremityseatingvalidation
2011 binti Abdul Majid NA, Notomi M, Rasmussen J (2011), "Musculoskeletal computational analysis of the influence of car-seat design/adjustment on fatigue-induced driving", In: 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization, pp. 1-6. [DOI] automotiveseating
2010 Agarwal P, Narayanan MS, Lee LF, Mendel F, Krovi VN (2010), "Simulation-Based Design of Exoskeletons Using Musculoskeletal Analysis", In: ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1357-1364. [DOIWWW] exoskeletonupper extremityrehab
2010 Alkjaer T, Wieland MR, Andersen MS, Simonsen EB, Rasmussen J (2010), "ACL Research Retreat V", J. Athl. Train., vol. 45, pp. 522-541. [DOIWWW] sportskneerehab
2010 Andersen MS, Benoit DL, Damsgaard M, Ramsey DK, Rasmussen J (2010), "Do kinematic models reduce the effects of soft tissue artefacts in skin marker-based motion analysis? An in vivo study of knee kinematics", J. Biomech., vol. 43, pp. 268-273. [DOI] kneegaitmethods
2010 Andersen MS, Damsgaard M, MacWilliams B, Rasmussen J (2010), "A computationally efficient optimisation-based method for parameter identification of kinematically determinate and over-determinate biomechanical systems", Comput. Methods Biomech. Biomed. Engin., vol. 13, pp. 171-183. [DOI] gaitmethods
2010 Andersen MS, Rasmussen J, Ramsey DK, Benoit DL (2010), "Validation of Knee Joint Models – An In Vivo Study", Book Chapter, In: 6th World Congress of Biomechanics (WCB 2010). August 1-6, 2010 Singapore, pp. 1288-1291. [PDFDOIWWW] kneevalidation
2010 Bastrup J, Andersen AS, Fakhri SF, Rasmussen CE (2010), "Ryggens biomekanik (in Danish) [The biomechanics of the back]", . [WWW] spine
2010 Bresnahan L, Fessler RG, Natarajan RN (2010), "Evaluation of change in muscle activity as a result of posterior lumbar spine surgery using a dynamic modeling system", Spine , vol. 35, pp. E761-7. [DOI] orthopedicsspinevalidation
2010 Cao E, Inoue Y, Liu T, Shibata K (2010), "Analysis of muscle forces in lower limbs based on wearable sensors", In: The 2010 IEEE International Conference on Information and Automation, pp. 185-190. [DOI] lower extremityfootvalidation
2010 Carbes S, Telfer ST, Woodburn J, Oosterwaal M, Rasmussen J (2010), "A new multisegmental foot model and marker protocol for accurate simulation of the foot biomechanics during walking", ISB 2011 Brussels. [PDF] footmethods
2010 Chu A, Hughes RE (2010), "A method to determine whether a musculoskeletal model can resist arbitrary external loadings within a prescribed range", Comput. Methods Biomech. Biomed. Engin., vol. 13, pp. 795-802. [DOI] orthopedicsshouldermethods
2010 Dendorfer S, Rasmussen J, Christensen ST, Robie B (2010), "The Effect of Spinal Disc Herniation on Multifidus Muscles", 56th Annual Orthopaedic Research Society Meeting, New Orleans, USA, vol. 56th Annua. orthopedicsspine
2010 Grujicic M, Arakere G, Xie X, LaBerge M, Grujicic A, Wagner DW, Vallejo A (2010), "Design-optimization and material selection for a femoral-fracture fixation-plate implant", Mater. Des., vol. 31, pp. 3463-3473. [DOIWWW] orthopedicsupper extremitylower extremitylegFEA
2010 Grujicic M, Pandurangan B, Xie X, Gramopadhye AK, Wagner D, Ozen M (2010), "Musculoskeletal computational analysis of the influence of car-seat design/adjustments on long-distance driving fatigue", Int. J. Ind. Ergon., vol. 40, pp. 345-355. [DOIWWW] automotivespineseating
2010 Kersting UG, Gurney JK, Lewis S, Rasmussen J (2010), "An individualized musculoskeletal model for the analysis of amputee running", In: Proceedings of the 28th Conference of the International Society of Biomechanics in Sports, ISBS, 19-23 July 2010, Marquette, MI, USA, pp. 142-144. [PDF] sportsrehab
2010 Kurpiers N (2010), "Dynamics of freestyle skiing: equipment development and implications for injury prevention strategies", Thesis, The University of Auckland, New Zealand. [WWW] sportsknee
2010 Kwan M (2010), "Designing the World’s Best Badminton Racket", Thesis, Aalborg University, Denmark. [PDF] sports
2010 Kwan M, Cheng CL, Tang WT, Rasmussen J (2010), "Erratum to: Measurement of badminton racket deflection during a stroke", Sports Eng., vol. 12, pp. 213-213. [DOIWWW] sports
2010 Lund ME, Andersen MS, Rasmussen J (2010), "Patient-specific optimized kinematic models of the leg", In: Presented at the 2nd Annual Meeting of the Danish Biomechanical Society, Aalborg, Denmark, pp. 1-1 p.. [PDF] lower extremitymethods
2010 Ma C, Zhang M, Tan C, Zhang C, Su W (2010), "Analysis of lower-limb muscle activities during whole body vibration with different standing postures", In: 2010 3rd International Conference on Biomedical Engineering and Informatics, pp. 1797-1801. [DOI] lower extremityvalidation
2010 Manders CJ (2010), "Combined musculoskeletal and finite element modelling of total hip replacement to account for surgical and patient related factors", Thesis, University of Southampton. [WWW] orthopedicshipgaitFEA
2010 Meijer K, Oomen P, Rausch J, Annegarn J, Rasmussen J, Siebertz K (2010), "A comparison of two different strength scaling methods for multi body modeling", In: IUTAM 2010, Leuven, Belgium, pp. 2-2 pp.. [PDF] methods
2010 Nakashima M (2010), "Modeling and Simulation of Human Swimming", Journal of Aero Aqua Bio-mechanisms, vol. 1, pp. 11-17. [DOI] sports
2010 Nakashima M, Komura T (2010), "An Analysis of Muscle Load on the Erector Spinae of a Pregnant Woman", JBSE, vol. 5, pp. 357-367. [DOIWWW] spinevalidation
2010 Nucibella E (2010), "Development of musculoskeletal model for biomechanical analysis of trans-tibial amputee gait", Thesis, University of Padova, Italy. [PDF] lower extremitygaitrehab
2010 Olesen CG, Busscher L, de Zee M, Rasmussen J (2010), "The significance of passive stiffness to a computational musculo-skeletal spine model of a seated human", .
2010 Olesen CG, de Zee M, Rasmussen J (2010), "Why is the Etiology of Pressure Ulcers Still Unknown?", .
2010 Olesen CG, de Zee M, Rasmussen J (2010), "Using a Computer Model to Bridge Published Experimental Seated Posture Results", In: Proceedings of the EPUAP 2010 Annual Conference. Birmingham, United Kingdom. seatingrehab
2010 Phillips CW, Forrester AI, Purdue AI, Stokes MJ (2010), "Optimisation of a bicycle chainring to aid in rehabilitation of athletes suffering from patellofemoral pain syndrome (PFPS)", Procedia Engineering, vol. 2, pp. 3151-3156. [DOIWWW] sportsrehab
2010 Purdue AI, Forrester AI, Taylor M, Stokes MJ, Hansen EA, Rasmussen J (2010), "Efficient human force transmission tailored for the individual cyclist", Procedia Engineering, vol. 2, pp. 2543-2548. [DOIWWW] sports
2010 Racine JO (2010), "Estimation de léffet dúne force virtuelle sur les forces de contact lors de la transition assis-debout (In French) [Estimating the effect of a virtual force contact during the transition seated-upright]", Thesis, Université du Québec, Canada. [WWW] hipkneerehab
2010 Rasmussen HY (2010), "Deformation Analysis of Human Anterior Cruciate Ligament by Musculoskeletal Model", In: The Proceedings of Conference of Kanto Branch. knee
2010 Rasmussen J, Andersen MS, Bichler R, Carbes S, de Zee M (2010), "Hip Joint Kinematics in Activities of Daily Living", J. Biomech., vol. 43 , pp. 25. orthopedicsautomotivehipmethods
2010 Rasmussen J, Kwan MM, Andersen MS, de Zee M (2010), "Analysis of segment energy transfer using musculoskeletal models in a high speed badminton stroke", . sports
2010 Rasmussen J, de Zee M (2010), "Computational investigation of two interventions for neck and upper extremity pain in office workers", In: 6th World Congress of Biomechanics (WCB 2010). August 1-6, 2010 Singapore, pp. 4-4 pp.. [PDFDOIWWW] work place ergonomicsupper extremityspine
2010 Saraswat P (2010), "Foot model for clinical application", Thesis, The University of Utah, UT, United States. [PDF] orthopedicsfootgait
2010 Saraswat P, Andersen MS, Macwilliams BA (2010), "A musculoskeletal foot model for clinical gait analysis", J. Biomech., vol. 43, pp. 1645-1652. [DOI] footleggaitmethodsvalidation
2010 Schwartz C, Lund ME, de Zee M, Rasmussen J (2010), "Prediction of Knee Loads Using a Lower Extremity Model Based on the Klein Horsman Data Set", In: ASME 2010 Summer Bioengineering Conference, pp. 269-270. [PDFDOIWWW] legvalidation
2010 Si W, Yan ZZ, Li Y, Liu SP (2010), "The Crouch Start Modeling and Simulation Based on AnyBody Technology", JDCTA: International Journal of Digital Content Technology and its Applications, vol. 4, pp. 8-14. [WWW] sports
2010 Ting-Liters C (2010), "Design an elder-friendly vehicle ingress space using musculoskeletal simulation", Thesis, National Chiao Tung University, Taiwan. [WWW] automotive
2010 Wagner DW, Divringi K, Ozcan C, Grujicic M, Pandurangan B, Grujicic A (2010), "Combined musculoskeletal dynamics/structural finite element analysis of femur physiological loads during walking", Multidiscipline Modeling in Materials and Structures, vol. 6, pp. 417-437. [DOI] orthopedicslower extremitygaitFEA
2010 Weber T (2010), "Functional outcome of navigated minimally invasive total hip endoprosthesis using muculoskeletal modeling", Thesis, University of Applied Science Regensburg, Germany. [PDF] orthopedicshipgait
2010 Wehner T, Claes L, Niemeyer F, Nolte D, Simon U (2010), "Influence of the fixation stability on the healing time--a numerical study of a patient-specific fracture healing process", Clin. Biomech. , vol. 25, pp. 606-612. [DOI] orthopedicsFEA
2010 Wehner T, Wolfram U, Henzler T, Niemeyer F, Claes L, Simon U (2010), "Internal forces and moments in the femur of the rat during gait", J. Biomech., vol. 43, pp. 2473-2479. [DOI] orthopedicslower extremityanimalsensitivity analysis
2010 Welke B, Hurschler C, Windhagen H, Calließ T, Schwarze M, Oehler S, Mücke S, Kraft M, Seehaus F (2010), "Validierung einer muskuloskelettalen Mehrkörpersimulation zur Ermittlung der Belastungen im Bereich der transfemuralen osseofixierten Endo-Exo-Prothese während des Gehens [Validation of a musculoskeletal multi-body simulation to determine the stresses in", BMT 2010, 44. DGBMT Jahrestagung, Rostock, Germany. [WWW] lower extremityvalidationrehab
2010 Worsley P, Stokes M, Taylor M (2010), "Comparison of Osteoarthritic Knee Kinematics and Kinetics with Age Matched Healthy Individuals", J. Biomech., pp. S29-S29. [WWW] orthopedicsknee
2010 Worsley P, Taylor M, Stokes M (2010), "Robustness of optimised motion capture and musculoskeletal modelling of Gait", In: 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. [PDF] gait
2010 Wu JZ, An KN, Cutlip RG, Dong RG (2010), "A practical biomechanical model of the index finger simulating the kinematics of the muscle/tendon excursions", Biomed. Mater. Eng., vol. 20, pp. 89-97. [DOI] handvalidation
2010 Xie X (2010), "Combined musculo-skeletal multi-body dynamics/finite element analysis of several ergonomics and bio-mechanics problems", Thesis, Clemson University, SC, United States. [WWW] orthopedicsautomotiveFEA
2010 de Zee M, Lund ME, Schwartz C, Olesen CG, Rasmussen J (2010), "Validation of musculoskeletal models: the importance of trend validations", In: IUTAM 2010, Leuven, Belgium, pp. 2-2 pp.. [PDF] kneeseatingvalidation
2009 Andersen MS (2009), "Kinematically Over-determinate Musculoskeletal Systems", Thesis, Aalborg University. [PDF] lower extremitygaitmethodsvalidation
2009 Andersen MS, Damsgaard M, Rasmussen J (2009), "Kinematic analysis of over-determinate biomechanical systems", Comput. Methods Biomech. Biomed. Engin., vol. 12, pp. 371-384. [DOI] gaitmethods
2009 Andersen MS, De Zee M, Dendorfer S, MacWilliams B, Rasmussen J (2009), "Validation of a detailed lower extremity model based on the Klein Horsman data set", In: XII International Symposium on Computer Simulation in Biomechanics, pp. 27-28. [PDF] lower extremityvalidation
2009 Chang CY, Rupp JD, Reed MP, Hughes RE, Schneider LW (2009), "Predicting the effects of muscle activation on knee, thigh, and hip injuries in frontal crashes using a finite-element model with muscle forces from subject testing and musculoskeletal modeling", Stapp Car Crash J., vol. 53, pp. 291-328. [WWW] automotivehiplower extremitykneeFEAvalidation
2009 Chao M, Ming Z, Chun-lin Z, Zhi-xiang L, Jian-xin Y (2009), "Analysis of Human Joint Forces in Standing Posture", J. Beijing Inst. Technol. . [WWW] lower extremity
2009 Chia-Yuan C (2009), "Prediction of the Effects of Lower-extremity Muscle Forces on Knee, Thigh, and Hip Injuries in Frontal Motor Vehicle Crashes. and Hip Injuries in Frontal Motor Vehicle Crashes", Thesis, University of Michigan. [WWW] automotivelower extremity
2009 De Zee M, Cattaneo PM, Svensson P, Pedersen TK, Melsen B, Rasmussen J, Dalstra M (2009), "Prediction of the articular eminence shape in a patient with unilateral hypoplasia of the right mandibular ramus before and after distraction osteogenesis—A simulation study", J. Biomech., vol. 42, pp. 1049-1053. [DOIWWW] orthopedicsmandiblevalidation
2009 Eltoukhy M, Asfour S (2009), "Implementation and validation of a detailed three dimensional inverse dynamics lower extremity model for gait analysis applications", In: Proceedings of the XXIst Annual International Occupational Ergonomics and Safety Conference, Dallas, Texas, pp. 57-62. hiplower extremitykneegaitvalidation
2009 Fukui H, Sakamoto J, Murakami H, Oda J, Tomita K, Higaki H (2009), "Biomechanical Analysis of Influence of Spinal Fixation on Intervertebral Joint Force by Using Musculoskeletal Model", In: 13th International Conference on Biomedical Engineering IFMBE Proceedings, pp. 1712-1715. orthopedicsspine
2009 Grujicic M, Pandurangan B, Arakere G, Bell WC, He T, Xie X (2009), "Seat-cushion and soft-tissue material modeling and a finite element investigation of the seating comfort for passenger-vehicle occupants", Mater. Des., vol. 30, pp. 4273-4285. [DOIWWW] automotiveseatingmethodsFEA
2009 Hansen EA, Jensen K, Hallén J, Rasmussen J, Pedersen PK (2009), "Effect of chain wheel shape on crank torque, freely chosen pedal rate, and physiological responses during submaximal cycling", J. Physiol. Anthropol., vol. 28, pp. 261-267. [PDFDOIWWW] sports
2009 Jung M, Cho H, Roh T, Lee K (2009), "Integrated Framework for Vehicle Interior Design Using Digital Human Model", J. Comput. Sci. Technol., vol. 24, pp. 1149. [DOIWWW] automotivemethods
2009 Kersting UG, de Zee M (2009), "Reflex responses and ankle joint loading during perturbed turning movements", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF] ankle
2009 Kim SH, Lee K (2009), "Development of discomfort evaluation method for car ingress motion", Int. J. Automot. Technol. Manage., vol. 10, pp. 619-627. [DOI] automotivemethods
2009 Koller T, Brodie M, Litzenberger S, Sabo A (2009), "Biomechanische Bewegungs- und Belastungsanalyse im modernen Skisport mittels Mehrkörpersimulation in AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] sports
2009 Lee LF, Narayanan MS, Kannan S, Mendel F, Krovi VN (2009), "Case Studies of Musculoskeletal-Simulation-Based Rehabilitation Program Evaluation", IEEE Trans. Rob., vol. 25, pp. 634-638. [DOI] upper extremityrehab
2009 Manders C, New A (2009), "Effect of Surgical Approach on Femoral Strain Distribution after Total Hip Replacement", 55th Annual Meeting of the Orthopaedic Research Society. [PDF] orthopedicshipFEA
2009 Olesen CG, Andersen MS, Rathleff MS, De Zee M, Rasmussen J (2009), "Understanding the biomechanics of medial tibial stress syndrome: a simulation study using a musculoskeletal model", In: Congress of the International Society of Biomechanics, ISB, pp. 1-1 p.. [PDFWWW] lower extremityrehab
2009 Olesen CG, de Zee M, Rasmussen J (2009), "Experimental Validation of a Computational Human Seating Model", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF] seatingvalidation
2009 Parasuraman S, Yee KC (2009), "Bio-Mechanical Analysis of Human Hand", In: 2009 International Conference on Computer and Automation Engineering, pp. 93-97. [DOI] handrehab
2009 Parasuraman S, Yee KC, Oyong A (2009), "Human upper limb and arm kinematics for robot based rehabilitation", In: 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 845-850. [DOI] exoskeletonupper extremityrehab
2009 Rasmussen J, Carbes S, Gomaa ST (2009), "A computational model of a reverse shoulder joint prosthesis", In: Presented at the Symposium on Computational Methods in Orthopaedic Biomechanics (Pre-ORS), Las Vegas, 2009, pp. 1-1 p.. [PDF] orthopedicsshoulder
2009 Rasmussen J, Tørholm S, de Zee M (2009), "Computational analysis of the influence of seat pan inclination and friction on muscle activity and spinal joint forces", Int. J. Ind. Ergon., vol. 39, pp. 52-57. [DOIWWW] spineseating
2009 Rasmussen J, de Zee M, Carbes S (2009), "Validation of a biomechanical model of the lumbar spine", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF] spinevalidation
2009 Rasmussen J, de Zee M, Dahl J, Damsgaard M (2009), "Salient properties of a combined minimum fatigue and quadratic muscle recruitment criterion", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 13-14. [PDF] methods
2009 Sakamoto J, Fukui H, Minowa T, Murakami H, Kawahara N, Tomita K (2009), "Mechanical analysis of spine with kyphosis due to compression fracture of osteoporotic vertebra", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 19-20. [PDF] orthopedicsspine
2009 Sakamoto J, Nakada Y, Murakami H, Kawahara N, Oda J, Tomita K, Higaki H (2009), "Musculoskeletal Analysis of Spine with Kyphosis Due to Compression Fracture of an Osteoporotic Vertebra", Book Chapter, In: Lim CT, Goh JC (Ed): 13th International Conference on Biomedical Engineering, pp. 1588-1591. [DOIWWW] orthopedicsspine
2009 Schwirtz A, Bichler R, Kaiser R (2009), "Method for biomechanical evaluation of the ingress and egress motion", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] automotive
2009 Sellgren U, Söderberg A (2009), "Robust brake feel design", Proc. Nafems World Congress 09, June 16-19, 2009, Crete, Greece. [WWW] automotive
2009 Siebertz K, Rausch J (2009), "Computer aided ergonomics case study: Vehicle brake system", In: Presented at the ANSYS Conference & 27th.CADFEM Users ́Meeting, pp. 12-12 pp.. [PDF] automotive
2009 Thielen T, Maas S, Zürbes A, Waldmann D, Kelm J (2009), "Entwicklung einer Hüftinterimsprothese (Spacer) mittels FE-Analyse unter Berücksichtigung der Muskel- und Gelenkkräfte aus AnyBody [Development of a hip interim prosthesis (spacer) using finite element analysis taking into account the muscle and joint for", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] orthopedicshipvalidation
2009 Wehner T, Claes L, Simon U (2009), "Internal loads in the human tibia during gait", Clin. Biomech. , vol. 24, pp. 299-302. [DOI] orthopedicsgait
2009 Worsley P, Warner M, Delaney S, Stokes M, Taylor M (2009), "The application of ultrasound imaging in the musculoskeletal modeling process", 55th Annual Meeting of the Orthopaedic Research Society, February 22-25, 2009, vol. Las Vegas,, pp. 1501. [PDF] methods
2009 Wu JZ, An KN, Cutlip RG, Andrew ME, Dong RG (2009), "Modeling of the muscle/tendon excursions and moment arms in the thumb using the commercial software anybody", J. Biomech., vol. 42, pp. 383-388. [DOI] handvalidation
2009 Wu JZ, Chiou SS, Pan CS (2009), "Analysis of musculoskeletal loadings in lower limbs during stilts walking in occupational activity", Ann. Biomed. Eng., vol. 37, pp. 1177-1189. [DOI] exoskeletonwork place ergonomicshiplower extremitykneeankle
2009 Wu JZ, Li ZM, Cutlip RG, An KN (2009), "A simulating analysis of the effects of increased joint stiffness on muscle loading in a thumb", Biomed. Eng. Online, vol. 8, pp. 41. [DOI] hand
2009 Wyss C (2009), "Muscle Modelling mit AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] footFEA
2009 Wyss C, Roethlisberger M, Gerber H (2009), "Intraarticular and muscle force reactions of the leg using different insoles", In: Proceedings of the ESB 2009 Workshop, June 7-9, 2009, Zürich, Switzerland, pp. 1-1 p.. [PDF] lower extremitygaitrehab
2009 Zander T, Rohlmann A, Bergmann G (2009), "How important is the correct placement of artificial discs?", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] orthopedicsspine
2009 de Zee M, Mikkelsen P, Wong C, Simonsen EB, Rasmussen J (2009), "The Influence of the Center of Rotation on Facet Joint Loading and End Plate Loading Investigated with Musculoskeletal Simulation", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF] spine
2009 de Zee M, Rasmussen J (2009), "Using musculoskeletal modeling for estimating the most important muscular output: force", In: 3D Physiological Human Workshop, 3DPH, Zermatt, Switzerland. 29. November - 02. December, pp. 62-70. methods
2008 Arakilo M (2008), "Joint forces within the ankle during level walking", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] anklegait
2008 Dubowsky SR (2008), "Multibody computational biomechanical model of the upper body", Thesis, Rutgers, The State University of New Jersey, NJ, United States. [WWW] shouldervalidationrehab
2008 Dubowsky SR, Rasmussen J, Sisto SA, Langrana NA (2008), "Validation of a musculoskeletal model of wheelchair propulsion and its application to minimizing shoulder joint forces", J. Biomech., vol. 41, pp. 2981-2988. [DOI] shouldervalidationrehab
2008 Duffett GA, Badillo H, Carbes S, Kiis A (2008), "Design and Optimization for Human Well-Being and Overall System Performance", In: Presented at the modeFrontier User Meeting 2008, 14-15 October 2008, Trieste, Italy, pp. 13-13 pp.. [PDF] methods
2008 Finley JM, Perreault EJ, Dhaher YY (2008), "Stretch reflex coupling between the hip and knee: implications for impaired gait following stroke", Exp. Brain Res., vol. 188, pp. 529-540. [PDFDOI] hipkneegait
2008 Fritz NM (2008), "Musculoskeletal Model, Countermeasure and Bone Analysis for Astronauts", ANSYS Conference & 26th. CADFEM Users’ Meeting. [PDF] aerospace
2008 Holmberg JL (2008), "Computational Biomechanics in Cross-country Skiing", Thesis, Institutionen för ekonomisk och industriell utveckling. [WWW] sports
2008 Holmberg LJ, Lund. AM (2008), "A musculoskeletal full-body simulation of cross-country skiing", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, vol. 222 , pp. 11-22. sports
2008 Kannan S (2008), "Quantitative Analysis of Masticatory Performance in Vertebrates", Thesis, State University of New York at Buffalo, NY, United States. [WWW] mandibleanimal
2008 Manders C, New A, Rasmussen. J (2008), "Validation of musculoskeletal gait simulation for use in investigation of total hip replacement", J. Biomech., vol. S41 , pp. S488-S488. [PDF] orthopedicshipgaitvalidation
2008 Motomu NAKASHIMA YM (2008), "Analyses of Four Swimming Strokes by a Whole Body Musculoskeletal Simulator for Swimming", In: Biomechanisms. sports
2008 Narayanan MS, Kannan S, Lee LF, Mendel F, Krovi VN (2008), "Virtual musculoskeletal scenario-testing case-studies", In: 2008 Virtual Rehabilitation, pp. 150-156. [DOI] methods
2008 Nolte A, Augat P, Rasmussen J (2008), "Analysis of the muscle and joint forces in the shoulder joint using the AnyBody simulation model", In: Poster presented at the ESB2008 conference, Luzern, Switzerland, pp. 1-1 p.. [PDFWWW] shouldervalidation
2008 Rasmussen J (2008), "Prediction of human posture and movement by musculoskeletal optimization - or Can AnyBody do the Limbo?", In: Poster presented at the ASME 2008 summer bioengineering conference, Marco Island, Florida, June 29-29, pp. 1-1 p.. [PDF] methods
2008 Rasmussen J, de Zee M (2008), "Design Optimization of Airline Seats", SAE Int. J. Passeng. Cars – Electron. Electr. Syst., vol. 1, pp. 580-584. [DOIWWW] aerospaceseating
2008 Rose M (2008), "Biomechanical Analysis of Anterior Cruciate Ligament Injury Mechanisms", Thesis, Aalborg University, Denmark. [PDF] kneegait
2008 Siebertz K, Rausch J (2008), "The AnyBody Car Driver Model, a CAE tool to evaluate comfort", Conference article from FISITA. [WWW] automotivevalidation
2008 Simon U, Niemeyer F, Claes L, Wehner T (2008), "Patient specific fracture healing simulation", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] orthopedicslower extremity
2008 Simon U, Wehner T, Cosgun I, Henzler T, Claes L, Wolfram U (2008), "Musculoskeletal model for the rat hind limb", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] lower extremityanimal
2008 Wu JZ, An KN, Cutlip RG, Krajnak K, Welcome D, Dong RG (2008), "Analysis of musculoskeletal loading in an index finger during tapping", J. Biomech., vol. 41, pp. 668-676. [DOI] work place ergonomicshandvalidation
2008 Wu JZ, Chiou SS, Pan CS (2008), "Analysis of the effects of stilts walking on musculoskeletal loading in low extremities", In: poster presented at the NACOB2008 conference, Ann Arbor, MI, pp. 1-1 p.. [PDF] exoskeletonwork place ergonomicslower extremity
2007 Andersen MS, Alkjær T, Rasmussen J, Damsgaard M (2007), "Marker Position Determination and Kinematic Analysis of a Patient-specific Lunge Model", In: International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p.. [PDF] lower extremitymethods
2007 Collet Y, Rasmussen J, Nuño N, Tétrault P, Hagemeister N (2007), "Computational Modeling of the shoulder and improvement of a new prosthetic design for massive rotator cuff tears: our experience with the AnyBody Modeling System", In: Proceedings of the 18th IASTED International Conference on Modelling and Simulation - MS 2007. / R. Wamkeue (ed.) IASTED, pp. 624-627. [WWW] orthopedicsshoulder
2007 Collet Y, Tétreault P, Rasmussen J, Nuño N, Hagemeister N (2007), "Computational modeling of a prosthetic shoulder: our experience with the anybody modeling system", In: Proceedings of the IASTED International Conference on Modelling and Simulation, pp. 624-629. [WWW]
2007 Haahr J (2007), "Planning and conduction of a validation experiment - Simulation of driving situations in a Ford vehicle", Thesis, Aalborg University, Denmark. [PDF] automotivevalidation
2007 Karlsson D, Osvalder AL, Rasmussen J (2007), "Towards better seating design – a discussion and comparison between office chairs and car seats", In: Nordic Ergonomics Society Conference 2007, Lysekil, Sweden, pp. 6-6 pp.. [PDF] automotivework place ergonomicsfurnitureseating
2007 Lund AM, Holmberg LJ (2007), "Which are the antagonists to the pectoralis major muscle in 4th gear, freestyle technique, cross-country skiing?", Science and Nordic Skiing, Linnamo, V. , Komi, PV and Müller, E. (Eds. ). [WWW] sports
2007 Manders C, New A, Rasmussen J (2007), "Validation of Hip Joint Force Simulation by Gait Analysis", ANSYS Conference & 25th.CADFEM Users’ Meeting. [PDF] hipgaitvalidation
2007 Nakashima M, Motegi Y (2007), "Development of a Full-Body Musculoskeletal Simulator for Swimming", In: Proceedings of the 2007 International Symposium on Computer Simulation in Biomechanics (ISCSB2007), pp. 59-60. [PDF] sportsmethodsvalidation
2007 Nolte A (2007), "Untersuchung der Muskel- und Gelenkkräfte im Schultergelenk mithilfe eines Simulationsmodells der Software AnyBody (In German) [Investigation of the muscle- and joint forces in the shoulder joint using AnyBody software]", Thesis, Unfallklinik Murnau, Germany and Paracelsus Medizinischen Privatuniversität Salzburg, Austria. [PDF] shouldervalidation
2007 Rasmussen J (2007), "AnyBody: CAE for the human body", ANSYS Conference & 25th.CADFEM Users’ Meeting. [PDF] methods
2007 Rasmussen J, Gielo-Perczak K (2007), "Biomechanical modeling of the shoulder anatomy", Book Chapter, In: Biomechanics in Ergonomics, Second Edition, pp. 395-404. [DOI] work place ergonomicsshoulder
2007 Rasmussen J, de Zee M, Christensen ST, Damsgaard M (2007), "Comparison of a musculoskeletal shoulder model with in-vivo joint forces", In: Presented at the International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p.. [PDF] shouldervalidation
2007 Rasmussen J, de Zee M, Tørholm S (2007), "Muscle Relaxation and Shear Force Reduction May Be Conflicting: A Computational Model of Seating", In: SAE Technical Paper Series, pp. Seattle,-Seattle, WA. [DOIWWW] automotiveseating
2007 Renner S (2007), "Determination of muscle forces acting on the femur and stress analysis", Thesis, Technische Universität München, Germany. [PDF] hiplower extremitygaitFEAvalidation
2007 Sullivan SR, Langrana NA, Sisto SA (2007), "Shoulder mechanics: analytical modeling and validation", In: Presentation at the American Soc. of Biomechanics Annual Meeting, pp. 2-2 pp.. [PDF] shouldervalidation
2007 Wagner DW, Reed MP, Rasmussen J (2007), "Assessing the Importance of Motion Dynamics for Ergonomic Analysis of Manual Materials Handling Tasks using the AnyBody Modeling System", In: SAE Technical Paper Series, pp. Seattle,-Seattle, WA. [DOIWWW] work place ergonomicsspine
2007 Wilssens J, Hagman F (2007), "From High Speed Plantar Pressure Measurement to Lower Limb Skeletal Motion", In: 8th Biennial Footwear Biomechanics Symposium, June 27-29, 2007, National Yang Ming University, Taipei, Taiwan, pp. 2-2 pp.. [PDF] footmethods
2007 de Zee M, Dalstra M, Cattaneo PM, Rasmussen J, Svensson P, Melsen B (2007), "Validation of a musculo-skeletal model of the mandible and its application to mandibular distraction osteogenesis", J. Biomech., vol. 40, pp. 1192-1201. [DOI] orthopedicsmandiblemethodsvalidation
2007 de Zee M, Falla D, Farina D, Rasmussen J (2007), "Prediction of neuromuscular adaptation of experimentally induced neck pain using a musculoskeletal model", In: Presented at the 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan, pp. 2-2 pp.. [PDF] spine
2007 de Zee M, Falla D, Farina D, Rasmussen J (2007), "Simulation of pain-induced alterations in cervical motor control", In: Poster presented at the World Congress on Neck Pain. January 20-22, Los Angeles, California, USA, pp. 1-1 p.. [PDFWWW] spine
2007 de Zee M, Falla D, Farina D, Rasmussen J (2007), "A DETAILED RIGID-BODY CERVICAL SPINE MODEL BASED ON INVERSE DYNAMICS", J. Biomech., vol. 40, pp. S284. [DOIWWW] spinemethods
2007 de Zee M, Hansen L, Wong C, Rasmussen J, Simonsen EB (2007), "A generic detailed rigid-body lumbar spine model", J. Biomech., vol. 40, pp. 1219-1227. [DOI] spinevalidation
2007 de Zee M, Hansen L, Wong C, Rasmussen J, Simonsen EB (2007), "A generic detailed rigid-body lumbar spine model", J. Biomech., vol. 40, pp. 1219-1227. [DOI] spinevalidation
2006 Andersen MS, Damsgaard M, Rasmussen J (2006), "Marker-based motion reconstruction of constrained rigid-segment systems", In: Presented at the 9th International Symposium on the 3-D Analysis of Human Movement, 28-30 June, Valenciennes, France, pp. 4-4 pp.. [PDF] methods
2006 Andre A, Carbes S, Ruiz JL (2006), "Development of a computer model of the thoracic human spine with an aim to investigate loss of stability in scoliosis", Thesis, Aalborg University, Denmark. [PDF] orthopedicsspine
2006 Annegarn J (2006), "Scaling in human simulation models. The development of an isometric strength scaling method which needs easy accessible data only", Thesis, Maastricht University, The Netherlands. methods
2006 Annegarn J, Rasmussen J, Savelberg HH, Verdijk LB, Meijer K (2006), "Scaling strength in human simulation models", In: 11th Symposium of the Flemish Society of Kinesiology, 20th September 2006, University Antwerp, pp. 1-1 p.. [PDF] methodsvalidation
2006 Damsgaard M, Rasmussen J, Christensen ST, Surma E, de Zee M (2006), "Analysis of musculoskeletal systems in the AnyBody Modeling System", Simulation Modelling Practice and Theory, vol. 14, pp. 1100-1111. [DOIWWW] methods
2006 Haahr J, Madsen T (2006), "Application of a Biomechanical Model for Prediction of Muscle Activity Patterns during Different Arm Cranking Styles", . upper extremityvalidation
2006 Hansen L, de Zee M, Rasmussen J, Andersen TB, Wong C, Simonsen EB (2006), "Anatomy and biomechanics of the back muscles in the lumbar spine with reference to biomechanical modeling", Spine , vol. 31, pp. 1888-1899. [DOI] spinemethods
2006 Lee LF, Krovi VN (2006), "Musculoskeletal Simulation Based Optimization of Rehabilitation Program", In: 2006 International Workshop on Virtual Rehabilitation, pp. 36-41. [DOI] rehab
2006 Rasmussen J, Christensen ST, Damsgaard M (2006), "Synthesis of natural movements by inverse dynamics musculoskeletal modelling", J. Biomech., vol. 39, pp. S45. [DOI] methods
2006 Rasmussen J, Christensen ST, Siebertz K, Rausch J (2006), "Posture and Movement Prediction by Means of Musculoskeletal Optimization", In: SAE Technical Paper Series. [DOIWWW] automotivemethods
2006 Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Andersen MS (2006), "Musculoskeletal simulation of orthopedic surgical procedures", In: Miller K, Poulikakos D (Ed): Poster presented at the Workshop Proceedings of Computational Biomechanics for Medicine. MICCAI 2006, Copenhagen, Denmark, pp. 126-138. [PDF] orthopedicsmethods
2006 Rausch J, Siebertz K, Christensen ST, Rasmussen J (2006), "Simulation des menschlichen Bewegungsapparates zur Innenraum-gestaltung von Fahrzeugen (in German) [Simulation of the human musculoskeletal system for vehicle interior design]", VDI Bericht, vol. 1967, pp. 1027-1048. [PDF] automotivemethods
2006 Signore MJ (2006), "A Screw-Theoretic Framework for Musculoskeletal System Modeling and Analysis", Thesis, State University of New York at Buffalo, NY, United States. [PDF] mandiblemethodsFEAanimal
2006 Svensson I, Jeppesen S, Segerström Å, Hansson GÅ (2006), "Use of inclinometers for measuring postures and movements in order to predict muscle activity", J. Biomech., vol. 39, pp. S93. [DOIWWW] methodsvalidation
2006 Vondrák V, Dostál Z, Rasmussen J, Damsgaard M (2006), "The algorithms of mathematical programming in muscle recruitment and muscle wrapping problems", Book Chapter, In: III European Conference on Computational Mechanics, pp. 194-194. [DOIWWW] methods
2006 de Jong P, de Zee M, Hilbers PA, Savelberg HH, van de Vosse FN, Wagemakers A, Meijer K (2006), "Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence", In: Poster presented at the 11th Symposium of the Flemish Society of Kinesiology, Antwerp, Belgium, pp. 1-1 p.. [PDF] validation
2005 De Zee M, Rasmussen J, Lem J, Siebertz K (2005), "Computer Simulations of the Active Motion System with Musculo-skeletal Models", In: SAE Technical Paper Series, pp. 272-278. [DOIWWW] automotiveseating
2005 Konakanchi K (2005), "Musculo-skeletal Modeling of Smilodon fatalis for virtual functional performance testing", Thesis, State University of New York at Buffalo, NY, United States. [PDF] mandibleanimal
2005 Lund M (2005), "Biomechanical study of cross-country skiing", Thesis, Umeå University, Sweden. [PDF] sportsshoulder
2005 Perreault EJ, Viant TL (2005), "Neural coordination of multijoint stretch reflexes in the human arm", Conf. Proc. IEEE Eng. Med. Biol. Soc., vol. 4, pp. 4389-4392. [DOI] upper extremitysensitivity analysis
2005 Rasmussen J, Christensen ST (2005), "Musculoskeletal Modeling of Egress with the AnyBody Modeling System", In: SAE Technical Paper Series, pp. 822-828. [DOIWWW] automotivemethods
2005 Rasmussen J, Christensen ST, Damsgaard M, de Zee M (2005), "Ergonomic optimization of a spring-loaded bicycle crank", In: 6th World Congress on Structural and Multidisciplinary Optimization. Rio de Janeiro, Brazil, pp. 8-8 pp.. [PDFWWW] sportsrehab
2005 Rasmussen J, Damsgaard M, Christensen ST, Kiis A (2005), "Computer-Aided Ergonomics - a new chapter in CAE?", ANSYS Conference & 23rd.CADFEM Users’ Meeting. [PDF] methods
2005 Rasmussen J, Damsgaard M, Christensen ST, de Zee M (2005), "AnyBody - decoding the human musculoskeletal system by computational mechanics", In: Skallerud B, Andersson HI (Ed): Konferanse i beregningsorientert mekanikk (computational mechanics). Trondheim, Norway, pp. 43-59. [PDF] automotivesportsmethodsrehab
2005 Rasmussen J, de Zee M, Damsgaard M, Christensen ST (2005), "Ergonomic Optimization of a Bicycle Crank Based on Musculoskeletal Modeling", In: 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp.. [PDF] sportsmethods
2005 Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Marek C, Siebertz K (2005), "A General Method for Scaling Musculo-Skeletal Models", In: 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp.. [PDFWWW] automotivemethods
2005 Schaerer C (2005), "Muskuloskeletale Belastung und Beanspruchung des Femurs waehrend des Gangzyklus: Entwicklung und Vergleich unterschiedlicher Belastungsund Materialmodelle", Thesis, ETH Zürich, Switzerland. [PDF] lower extremitygaitFEA
2005 Sullivan SR, Langrana NA, Sisto SA (2005), "Multibody Computational Biomechanical Model of the Upper Body", In: ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1175-1180. [DOIWWW] shouldervalidationrehab
2004 Eshuis P (2004), "Knee Modelling", . [PDF]
2004 Gielo-Perczak K, Rasmussen J, Christensen ST (2004), "An Analysis of Load Transmission Within The Human Body During Pushing and Pulling", In: Proceedings of the XVIII Conference of the International Society for Occupational Ergonomics and Safety, Houston, TX, CD, Group 10, pp. 4-8. [WWW] work place ergonomics
2004 Rasmussen J, Christensen ST, Gföhler M, Damsgaard M, Angeli T (2004), "Design optimization of a pedaling mechanism for paraplegics", Struct. Multidiscip. Optim., vol. 26, pp. 132-138. [DOIWWW] methodsrehab
2004 Rasmussen J, Søren TC, Damsgaard M, de Zee M (2004), "The role of mechanics and optimization in ergonomics", In: 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, July 12-13, 2004, pp. 10-10 pp.. [PDFWWW] work place ergonomicsrehab
2003 Christensen ST, Siebertz K, Damsgaard M, De Zee M, Rasmussen J, Paul G (2003), "Human Seat Modeling Using Inverse Dynamic Musculo-Skeletal Models", In: SAE Technical Paper Series, pp. 01-2221. [DOIWWW] automotiveseating
2003 Forster E (2003), "Predicting muscle forces in the human lower limb during locomotion", Thesis, University of Ulm, Germany. [WWW] lower extremitygaitvalidation
2003 Holmberg J, Wagenius P (2003), "A biomechanical model of a double-poling skier", In: Milburn University of Otago Ped (Ed): International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., pp. 5-5 pp.. [PDF] sports
2003 Jun SK, Zhou X, Ramsey DK, Krovi VN (2003), "A comparative study of human motion capture and computational analysis tools", In: The 2nd International Digital Human Modeling Symposium, Citeseer. [WWW] methods
2003 Rasmussen J, Dahlquist J, Damsgaard M, de Zee M, Christensen ST (2003), "Musculoskeletal modeling as an ergonomic design method", In: International Ergonomics Association XVth Triennial Conference, August 24-29, 2003, Seoul, Korea, pp. 4-4 pp.. [PDFWWW] methods
2003 Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M (2003), "Designing a general software system for musculoskeletal analysis", In: IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 6-6 pp.. [PDFWWW] methods
2003 Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M, Vondrak V (2003), "AnyBody - a software system for ergonomic optimization", In: Fifth World Congress on Structural and Multidisciplinary Optimization, May 19-23, 2003, Lido di Jesolo - Venice, Italy, pp. 6-6 pp.. [PDFWWW] methods
2003 de Zee M, Andersen TB, Hansen L, Wong C, Rasmussen J, Simonsen E (2003), "Simulation of lifting using the better of two worlds: Forward and inverse dynamics", In: IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 4-4 pp.. [PDFWWW] methods
2002 Gao F, Damsgaard M, Rasmussen J, Christensen ST (2002), "Calculating Muscle Line-of-action for Musculo-skeletal Modeling", Biol. Cybern., vol. 3 , pp. 199-210. methods
2002 Rasmussen J, Damsgaard M, Christensen ST, Surma E (2002), "Design optimization with respect to ergonomic properties", Struct. Multidiscip. Optim., vol. 24, pp. 89-97. [DOIWWW] methods
2002 Rasmussen J, Vondrak V, Damsgaard M, de Zee M, Christensen ST (2002), "The AnyBody project - Computer analysis of the human body", In: Computer Analysis of the Human Body. Biomechanics of Man, pp. 270-274. [PDF] methods
2001 Damsgaard M, Christensen ST, Rasmussen J (2001), "An efficient numerical algorithm for solving the muscle recruitment problem in inverse dynamics simulations", In: International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3-3 pp.. [PDF] methods
2001 Lindsay N (2001), "Modelling of the Shoulder Mechanism. A report describing the development of a three-dimensional biomechanical model of the human shoulder complex", . [PDF]
2001 Rasmussen J, Damsgaard M, Christensen ST (2001), "Optimization of human motion: to invert inverse dynamics", In: International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3-3 pp.. [PDF] methods
2001 Rasmussen J, Damsgaard M, Christensen ST (2001), "Simulation of tendon energy storage in pedaling", In: MEDICON 2001, IX Mediterranean Conference on Medical and Biological Engineering and Computing. Pula, Croatia, June 12-15, pp. 4-4 pp.. [PDF] methods
2001 Rasmussen J, Damsgaard M, Voigt M (2001), "Muscle recruitment by the min/max criterion -- a comparative numerical study", J. Biomech., vol. 34, pp. 409-415. [DOIWWW] methods
2000 Damsgaard M, Rasmussen J, Christensen ST (2000), "Numerical simulation and justification of antagonists in isometric squatting", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1-1 p.. [PDF] methods
2000 Damsgaard M, Rasmussen J, Christensen ST (2000), "Bi-articular muscles as optimum force providers", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1-1 p.. [PDF] methods
2000 Hartung I, Sjöström J (2000), "Optimering av stakning i längdskidåkningens klassiska stil (in Swedish, with English abstract) [Optimization of poling when cross-country skiing, classical style]", Thesis, Mid Sweden University, Sweden. [PDF] sports
2000 Rasmussen J (2000), "The AnyBody Project - modeling human motion by computer", . [PDF]
2000 Rasmussen J, Damsgaard M, Christensen ST (2000), "Inverse-inverse dynamics simulation of musculo-skeletal systems", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, pp. 1-1 p.. [PDF] sportsmethods
1999 Rasmussen J, Damsgaard M, Voigt M (1999), "Joint Load Identification during Cyclic Movements", In: IUTAM Symposium on Synthesis in Bio Solid Mechanics, Lyngby, May 24-27, 1998, pp. 428. [WWW] methods
Mohammad Aimaduddin Atiq bin Kamisan, Xian CHEN, Junji OUGI (YYYY), "Biomechanical simulation of knee joint by combining multi-body dynamics and finite element analysis", . kneeFEA
Xiang X, Yamada Y, Akiyama Y, Nakamura H, Kudo N (YYYY), "Effect of Parameters on Lumbar Compressive Force during Patient Transfer", JOURNAL MISSING. [PDFDOIWWW] NEWwork place ergonomics
Zhao P, Ji Z, Wen R, Li J, Liang X, Jiang G (YYYY), "Biomechanical Characteristics of Vertical Jumping of Preschool Children in China Based on Motion Capture and Simulation Modeling", JOURNAL MISSING. [PDFDOIWWW] NEWsportshipknee

Last update: 2022.01.03