Industry

orthopedicsautomotiveexoskeletonaerospacedefensework place ergonomicsconsumer productsfurnituresports

Body part

handwristupper extremityshouldertrunkspinehiplower extremitykneeanklefootmandibleelbowleg

Research area

seatinggaitmethodsFEAanimaloccupational healthvalidationsensitivity analysisrehab

Year	744 Publications	Keywords
2020	Asadi F, Arjmand N (2020), "Marker-less versus marker-based driven musculoskeletal models of the spine during static load-handling activities", J. Biomech., vol. 112, pp. 110043. [DOI]	work place ergonomicsspinemethods
2020	Aurbach M, Špička J, Süß F, Vychytil J, Havelková L, Ryba T, Dendorfer S (2020), "Torus obstacle method as a wrapping approach of the deltoid muscle group for humeral abduction in musculoskeletal simulation", J. Biomech., pp. 109864. [DOI, WWW]	shouldermethods
2020	Bassani T, Stucovitz E, Quian Z, Briguglio M, Galbusera F (2020), "ASSESSMENT OF THE ANYBODY FULL BODY MUSCULOSKELETAL MODEL IN COMPUTING SPINE LOADS AT LUMBAR LEVEL: COMPARISON WITH IN VIVO VALUES OBTAINED DURING EXERCISE TASKS", . [DOI]	spinevalidation
2020	Cappetti N, Naddeo A, Soldovieri VM, Vitillo I, Fiorillo I (2020), "Perceived Comfort and Muscular Activity: A Virtual Assessment of Possible Correlations", In: Design Tools and Methods in Industrial Engineering, pp. 59-70. [DOI]	upper extremitymethods
2020	Castro MN, Rahman T, Nicholson KF, Rasmussen J, Bai S, Andersen MS (2020), "A Case Study on Designing a Passive Feeding-Assistive Orthosis for Arthrogryposis", J. Med. Device., vol. 14. [DOI, WWW]	exoskeletonupper extremity
2020	Chander DS, Cavatorta MP (2020), "Modelling Interaction Forces at a Curved Physical Human-Exoskeleton Interface", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 217-225. [DOI]	NEWexoskeletonwork place ergonomics
2020	De Roeck J, Van Houcke J, Almeida D, Galibarov P, De Roeck L, Audenaert EA (2020), "Statistical Modeling of Lower Limb Kinetics During Deep Squat and Forward Lunge", Front Bioeng Biotechnol, vol. 8, pp. 233. [DOI]	hipknee
2020	Deane NC (2020), "Pressure Monitoring Based Identification of the EOD Suit: Human Interface Load Distribution and Ergonomics", Ph.D. Thesis, University of Massachusetts Lowell. [WWW]	NEWdefensework place ergonomics
2020	Dejtiar DL, Bartsoen L, Wesseling M, Wirix-Speetjens R, Sloten JV, Perez MA (2020), "Standard Cruciate-Retaining Total Knee Arthroplasty Implants can Reproduce Native Kinematics", In: F. Rodriguez Y Baena and F. Tatti (eds.) (Ed): CAOS 2020 (EPiC Series in Health Sciences, vol. 4), pp. 61–64.	orthopedicsknee
2020	Dupré T, Potthast W (2020), "Groin injury risk of pubertal soccer players increases during peak height velocity due to changes in movement techniques", J. Sports Sci., pp. 1-9. [DOI]	sportslower extremity
2020	El-Edrissi O (2020), "Contribution of an upper body stick-figure model for subject-specific scaling approaches of generic musculoskeletal models in the AnyBody Modelling System", Masters Thesis, Deutsche Sporthochschule Köln. [DOI]	methods
2020	Ferle M (2020), "The soft-tissue restraints of the knee and its balancing capacity in total knee arthroplasty procedures", Ph.D. Thesis, Gottfried Wilhelm Leibniz Universitat Hannover . [WWW]	NEWorthopedicskneevalidation
2020	Gao F, Zong S, Han ZW, Xiao Y, Gao ZH (2020), "Musculoskeletal computational analysis on muscle mechanical characteristics of drivers’ lumbar vertebras and legs in different sitting postures", Rev. Assoc. Med. Bras., vol. 66, pp. 637-642. [DOI, WWW]	automotivespinelower extremityseating
2020	Ghezelbash F, Shirazi-Adl A, Plamondon A, Arjmand N (2020), "Comparison of different lifting analysis tools in estimating lower spinal loads - Evaluation of NIOSH criterion", J. Biomech., vol. 112, pp. 110024. [DOI]	NEWwork place ergonomicsspine
2020	Groß SJ (2020), "Muscle Fatigue in Musculoskeletal Numerical Models", Thesis, Universität Regensburg/Regensburg University, Germany. [WWW]	methods
2020	Han KS, Kang SR, Kwon TK (2020), "ANALYSIS OF MUSCLE STRENGTH EFFECTS ON EXERCISE PERFORMANCE USING DYNAMIC STABILIZATION EXERCISE DEVICE", J. Mech. Med. Biol., pp. 2040004. [DOI]	NEWsportsspinevalidationrehab
2020	Hedegaard M, Anvari-Moghaddam A, Jensen BK, Jensen CB, Pedersen MK, Samani A (2020), "Prediction of energy expenditure during activities of daily living by a wearable set of inertial sensors", Med. Eng. Phys., vol. 75, pp. 13-22. [DOI]	gaitmethods
2020	Koo YJ, Jung Y, Seon JK, Koo S (2020), "Anatomical ACL Reconstruction can Restore the Natural Knee Kinematics than Isometric ACL Reconstruction During the Stance Phase of Walking", International Journal of Precision Engineering and Manufacturing. [DOI]	orthopedicsknee
2020	Kurpiers N, McAlpine P, Kersting UG (2020), "A biomechanical field testing approach in snow sports: Case studies toward a detailed analysis of joint loading", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120918037. [DOI]	sportslower extremity
2020	Larsen FG, Svenningsen FP, Andersen MS, de Zee M, Skals S (2020), "Estimation of Spinal Loading During Manual Materials Handling Using Inertial Motion Capture", Ann. Biomed. Eng., vol. 48, pp. 805-821. [DOI]	work place ergonomicsspine
2020	Liu X, Huang H, Ren S, Ao Y, Rong Q (2020), "Anterior Cruciate Ligament Injuries Alter the Kinematics and Kinetics of Knees with or Without Meniscal Deficiency", In: Multibody Dynamics 2019, pp. 11-17. [DOI]	kneegait
2020	Liu X, Huang H, Ren S, Rong Q, Ao Y (2020), "Use of the normalcy index for the assessment of abnormal gait in the anterior cruciate ligament deficiency combined with meniscus injury", Comput. Methods Biomech. Biomed. Engin., pp. 1-7. [DOI]	orthopedicskneegait
2020	Liu X, Huang H, Yin W, Ren S, Rong Q, Ao Y (2020), "Anterior cruciate ligament deficiency combined with lateral and/or medial meniscal injury results in abnormal kinematics and kinetics during level walking", Proc. Inst. Mech. Eng. H, vol. 234, pp. 91-99. [DOI]	orthopedicskneegait
2020	Liu Y, Song Q, Li C, Guan X, Ji L (2020), "Quantitative Assessment of Motor Function for Patients with a Stroke by an End-Effector Upper Limb Rehabilitation Robot", Biomed Res. Int., vol. 2020, pp. 5425741. [DOI]	upper extremityrehab
2020	Michnik R, Zadoń H, Nowakowska-Lipiec K, Jochymczyk-Woźniak K, Myśliwiec A, Mitas AW (2020), "The Effect of the Pelvis Position in the Sagittal Plane on Loads in the Human Musculoskeletal System", Acta Bioeng. Biomech., vol. 22, pp. 35-52. [DOI]	trunkspinelower extremitysensitivity analysis
2020	Miyoshi T, Kamada Y, Kobayashi Y (2020), "Differences in Simulated EMG Activities between a Non-Rotational Shot and an Ordinary Instep Kick Identified by Principal Component Analysis", Proc. AMIA Annu. Fall Symp., vol. 49, pp. 154. [DOI, WWW]	sportslower extremitymethods
2020	Mohamaddan S, Rahman A, Jamali A, Hazmi H, Limbai MM (2020), "Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device", In: Intelligent Manufacturing and Energy Sustainability, pp. 739-748. [DOI]	upper extremityrehab
2020	Mundt M, Koeppe A, David S, Witter T, Bamer F, Potthast W, Markert B (2020), "Estimation of Gait Mechanics Based on Simulated and Measured IMU Data Using an Artificial Neural Network", Front Bioeng Biotechnol, vol. 8, pp. 41. [DOI]	gait
2020	Mundt M, Thomsen W, Witter T, Koeppe A, David S, Bamer F, Potthast W, Markert B (2020), "Prediction of lower limb joint angles and moments during gait using artificial neural networks", Med. Biol. Eng. Comput., vol. 58, pp. 211-225. [DOI]	gait
2020	Nowakowska-Lipiec K, Michnik R, Linek P, Myśliwiec A, Jochymczyk-Woźniak K, Gzik M (2020), "A numerical study to determine the effect of strengthening and weakening of the transversus abdominis muscle on lumbar spine loads", Comput. Methods Biomech. Biomed. Engin., pp. 1-10. [DOI]	orthopedicsspinerehab
2020	Obrębska P, Skubich J, Piszczatowski S (2020), "Gender differences in the knee joint loadings during gait", Gait Posture, vol. 79, pp. 195-202. [DOI]	kneegait
2020	Peng Y, Wong DW, Wang Y, Chen TL, Tan Q, Chen Z, Jin Z, Zhang M (2020), "Immediate Effects of Medially Posted Insoles on Lower Limb Joint Contact Forces in Adult Acquired Flatfoot: A Pilot Study", Int. J. Environ. Res. Public Health, vol. 17, pp. 2226. [DOI]	orthopedicshipkneeanklegait
2020	Peters M, Wischniewski S (2020), "Evaluation of Physical Workload Using Simulation Versus Motion Capturing Data for Biomechanical Models", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11. [DOI]	NEWwork place ergonomicsmethods
2020	Phillips CW, Forrester AI, Hudson DA, Turnock SR (2020), "Propulsive efficiency of alternative underwater flykick techniques for swimmers", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120912610. [DOI]	sports
2020	Rasmussen J, Lund ME, Waagepetersen RP (2020), "Data-Based Parametric Biomechanical Models for Cyclic Motions", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 372-379. [DOI]	NEWmethods
2020	Reilly M, Kontson K (2020), "Computational musculoskeletal modeling of compensatory movements in the upper limb", J. Biomech., vol. 108, pp. 109843. [DOI]	exoskeletonupper extremityspinerehab
2020	Ruggiero A, D’Amato R, Ungureanu N (2020), "Musculoskeletal multibody simulations for the optimal tribological design of human prostheses: the case of the ankle joint", IOP Conf. Ser.: Mater. Sci. Eng., vol. 749, pp. 012008. [DOI, WWW]	orthopedicsanklegait
2020	Shigemitsu, R., Sasaki, K., Rasmussen, J. (2020), "Musculoskeletal modeling with jaw motion data from a TMD patient", In: Hanson L, Högberg D, Brolin E (Ed): Advances in Transdisciplinary Engineering series 11, pp. 108-114. [DOI]	NEWorthopedicsmandible
2020	Sjöberg M (2020), "Biomechanical analyses of flywheel resistance exercise: From a space-and ground-based perspective", Ph.D. Thesis, KTH, Sweden, School of Engineering Sciences in Chemistry, Biotechnology and Health (CBH). [WWW]	NEWaerospacesportsspinelower extremity
2020	Smith AJJ, Fournier BN, Nantel J, Lemaire ED (2020), "Estimating upper extremity joint loads of persons with spinal cord injury walking with a lower extremity powered exoskeleton and forearm crutches", J. Biomech., vol. 107, pp. 109835. [DOI]	exoskeletonupper extremitylower extremitygait
2020	Taira K, Kobayashi Y, Tanaka K (2020), "Evaluation of Operability for a Competition Wheelchair Using Manipulability", Proc. AMIA Annu. Fall Symp., vol. 49, pp. 53. [DOI, WWW]	sportsupper extremityvalidationrehab
2020	Wiggermann N, Zhou J, McGann N (2020), "Effect of Repositioning Aids and Patient Weight on Biomechanical Stresses When Repositioning Patients in Bed", Hum. Factors, pp. 18720819895850. [DOI]	work place ergonomicshandspine
2020	Wu R, Wang J, Chen W, Wang P (2020), "Design of a transfer robot for the assistance of elderly and disabled", Adv. Robot., pp. 1-11. [DOI]	exoskeletonwork place ergonomicslower extremity
2020	Zhang Q, Chen Z, Zhang Z, Jin Z, Muratoglu OK, Varadarajan KM (2020), "Leveraging subject-specific musculoskeletal modeling to assess effect of anterior cruciate ligament retaining total knee arthroplasty during walking gait", Proc. Inst. Mech. Eng. H, pp. 954411920947204. [DOI]	orthopedicskneegait
2020	Zhang Y, Chen Z, Peng Y, Zhao H, Liang X, Jin Z (2020), "Predicting ground reaction and tibiotalar contact forces after total ankle arthroplasty during walking", Proc. Inst. Mech. Eng. H, pp. 954411920947208. [DOI]	orthopedicsanklegait
2020	Zhou J, Wiggermann N (2020), "The effects of hospital bed features on physical stresses on caregivers when repositioning patients in bed", Appl. Ergon., vol. 90, pp. 103259. [DOI]	work place ergonomicshandupper extremityshoulderspine
2020	Zongxing L, Xiangwen W, Shengxian Y (2020), "The effect of sitting position changes from pedaling rehabilitation on muscle activity", Comput. Methods Biomech. Biomed. Engin., pp. 1-10. [DOI]	sportsrehab
2020	亚东 陈 (2020), "Biomechanical Analysis of Knee Joint during the Process of Jumping and Landing", MOS, vol. 09, pp. 77-86. [DOI, WWW]	knee
2019	Andrzej B, Anna S, Robert M, Miłosz C, Piotr W, Jacek J (2019), "Analysis of Skeletal Muscle System Loads for the Most Optimal Positions During Lifting in Different Load Distances", In: Biomechanics in Medicine and Biology, pp. 221-230. [DOI]	work place ergonomicsspine
2019	Ardestani MM, ZhenXian C, Noori-Dokht H, Moazen M, Jin Z (2019), "Computational analysis of knee joint stability following total knee arthroplasty", J. Biomech., vol. 86, pp. 17-26. [DOI]	orthopedicskneegait
2019	Ashtiani MN, Azghani M, Shakouri SK (2019), "Biomechanical Modeling of Hip Abduction Exercise Using Optimized Inverse Dynamics", Zahedan J Res Med Sci, vol. In Press. [DOI, WWW]	hiplower extremityrehab
2019	Baldoni M, Gu W (2019), "Effect of fixed charge density on water content of IVD during bed rest: A numerical analysis", Med. Eng. Phys., vol. 70, pp. 72-77. [DOI]	spine
2019	Bassani T, Casaroli G, Galbusera F (2019), "Dependence of lumbar loads on spinopelvic sagittal alignment: An evaluation based on musculoskeletal modeling", PLoS One, vol. 14, pp. e0207997. [DOI]	orthopedicsspinehip
2019	Bayoglu R, Galibarov PE, Verdonschot N, Koopman B, Homminga J (2019), "Twente Spine Model: A thorough investigation of the spinal loads in a complete and coherent musculoskeletal model of the human spine", Med. Eng. Phys., vol. 68, pp. 35-45. [DOI]	spine
2019	Castro MN, Rasmussen J, Andersen MS, Bai S (2019), "A compact 3-DOF shoulder mechanism constructed with scissors linkages for exoskeleton applications", Mechanism and Machine Theory, vol. 132, pp. 264-278. [DOI, WWW]	exoskeletonshoulder
2019	Castro MN, Rasmussen J, Bai S, Andersen MS (2019), "The reachable 3-D workspace volume is a measure of payload and body-mass-index: A quasi-static kinetic assessment", Appl. Ergon., vol. 75, pp. 108-119. [DOI]	exoskeletonwork place ergonomicsupper extremitymethods
2019	Castro MN, Rasmussen J, Bai S, Andersen MS (2019), "Validation of subject-specific musculoskeletal models using the anatomical reachable 3-D workspace", J. Biomech., vol. 90, pp. 92-102. [DOI]	upper extremitymethodsvalidation
2019	Chander DS, Cavatorta MP (2019), "Modelling friction at the mechanical interface between the human and the exoskeleton", International Journal of Human Factors Modelling and Simulation, vol. 7, pp. 119-136. [DOI, WWW]	exoskeleton
2019	Chen Z, Zhang J, Zhang X, Jin ZM (2019), "Biomechanics and Tribology of Artificial Knee Joint", Book Chapter, In: Fu J, Jin ZM, Wang JW (Ed): UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 191-239. [DOI]	orthopedicskneegaitFEA
2019	De Pieri E, Lunn DE, Chapman GJ, Rasmussen KP, Ferguson SJ, Redmond AC (2019), "Patient characteristics affect hip contact forces during gait", Osteoarthritis Cartilage, vol. 27, pp. 895-905. [DOI]	orthopedicshiplower extremitygaitvalidation
2019	Dejtiar DL, Dzialo CM, Pedersen PH, Jensen KK, Fleron M, Andersen MS (2019), "Development and evaluation of a subject-specific lower limb model with an 11 DOF natural knee model using MRI and EOS during a quasi-static lunge", J. Biomech. Eng.. [DOI]	knee
2019	Dupré T, Dietzsch M, Komnik I, Potthast W, David S (2019), "Agreement of measured and calculated muscle activity during highly dynamic movements modelled with a spherical knee joint", J. Biomech., vol. 84, pp. 73-80. [DOI]	lower extremitykneegaitvalidation
2019	Dzialo CM, Mannisi M, Halonen KS, de Zee M, Woodburn J, Andersen MS (2019), "Gait alteration strategies for knee osteoarthritis: a comparison of joint loading via generic and patient-specific musculoskeletal model scaling techniques", International Biomechanics, vol. 6, pp. 54-65. [DOI]	orthopedicskneegait
2019	Dzialo CM, Pedersen PH, Jensen KK, de Zee M, Andersen MS (2019), "Evaluation of predicted patellofemoral joint kinematics with a moving-axis joint model", Med. Eng. Phys., vol. 73, pp. 85-91. [DOI]	kneevalidation
2019	Flores-Hernandez C, Eskinazi I, Hoenecke HR, D'Lima DD (2019), "Scapulothoracic rhythm affects glenohumeral joint force", JSES Open Access, vol. 3, pp. 77-82. [DOI]	shouldervalidationsensitivity analysis
2019	Gao Y, Jin ZM (2019), "Biomechanics and Biotribology of UHMWPE Artificial Hip Joints", Book Chapter, In: Fu J, Jin ZM, Wang JW (Ed): UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 241-286. [DOI]	orthopedicshipgaitFEA
2019	Guan X, Kuai S, Song L, Liu W, Liu Y, Ji L, Wang R (2019), "Effects of Ankle Joint Motion on Pelvis-Hip Biomechanics and Muscle Activity Patterns of Healthy Individuals in Knee Immobilization Gait", J. Healthc. Eng., vol. 2019, pp. 3812407. [DOI]	exoskeletongaitrehab
2019	Harthikote Nagaraja V (2019), "Motion capture and musculoskeletal simulation tools to measure prosthetic arm functionality", Ph.D. Thesis, University of Oxford. [WWW]	NEWexoskeletonupper extremityvalidation
2019	Hazrati E, Azghani M (2019), "Saddle place effect on the leg joints range of motion and muscles contraction velocity in ergometer: parametric study", Modares Mechanical Engineering, vol. 18, pp. 91-99. [WWW]	sportslower extremityrehab
2019	Heinen F, S Rensen SR, King M, Lewis M, Lund ME, Rasmussen J, de Zee M (2019), "Muscle-tendon unit parameter estimation of a Hill-type musculoskeletal model based on experimentally obtained subject-specific torque profiles", J. Biomech. Eng.. [DOI]	lower extremitymethods
2019	Higuchi R, Komatsu A, Iida J, Iwami T, Shimada Y (2019), "Construction and validation under dynamic conditions of a novel thoracolumbar spine model with defined muscle paths using the wrapping method", Journal of Biomechanical Science and Engineering, vol. 14, pp. 18-00432-18-00432. [DOI]	spinemethods
2019	Hu J, Xin H, Chen Z, Zhang Q, Peng Y, Jin Z (2019), "The role of menisci in knee contact mechanics and secondary kinematics during human walking", Clin. Biomech. , vol. 61, pp. 58-63. [DOI]	orthopedicskneegait
2019	Huang H, Yin W, Ren S, Yu Y, Zhang S, Rong Q, Ao Y (2019), "Muscular Force Patterns during Level Walking in ACL-Deficient Patients with a Concomitant Medial Meniscus Tear", Appl. Bionics Biomech., vol. 2019, pp. 7921785. [DOI]	orthopedicskneegait
2019	Ignasiak D (2019), "A novel method for prediction of postoperative global sagittal alignment based on full-body musculoskeletal modeling and posture optimization", J. Biomech., pp. 109324. [DOI]	orthopedicsspinemethodsvalidation
2019	Iida J, Miyakoshi N, Hongo M, Iwami T, Iwami T, Higuchi R, Komatsu A, Matsunaga T, Shimada Y (2019), "Calculation of Intervertebral Disc Pressure in the Thoracic and Lumbar Spine in Elderly Women with Kyphosis Using a Novel Musculoskeletal Model with Isolated Thoracic Vertebrae and Rib Cage", OJO, vol. 09, pp. 241-253. [DOI, WWW]	orthopedicsspine
2019	Iwasaki K, Okuya G, Nishisako Y, Chijiwa N, Arizono H, Wada C (2019), "Evaluation of Upper Limb Muscle Load in Lower-Limb Amputees during Ladder Climbing", International Journal of New Technology and Research, vol. 5. [DOI, WWW]	sportsupper extremityvalidation
2019	Jiang C, Xiang Z, Zhao Z, Yang Y (2019), "The Design of an Adjustable Rehabilitation Bed based on Human Biomechanics", In: Advances in Mechanism and Machine Science, pp. 143-153. [DOI]	rehab
2019	Kang KT, Koh YG, Nam JH, Jung M, Kim SJ, Kim SH (2019), "Biomechanical evaluation of the influence of posterolateral corner structures on cruciate ligaments forces during simulated gait and squatting", PLoS One, vol. 14, pp. e0214496. [DOI]	kneegaitvalidation
2019	Kang KT, Koh YG, Park KM, Choi CH, Jung M, Shin J, Kim SH (2019), "The anterolateral ligament is a secondary stabilizer in the knee joint", Bone Joint Res., vol. 8, pp. 509–517. [DOI, WWW]	orthopedicskneegaitvalidation
2019	Karatsidis A, Jung M, Schepers HM, Bellusci G, de Zee M, Veltink PH, Andersen MS (2019), "Musculoskeletal model-based inverse dynamic analysis under ambulatory conditions using inertial motion capture", Med. Eng. Phys., vol. 65, pp. 68-77. [DOI]	gaitmethods
2019	Kim Y, Kim J, Lee KM, Koo S (2019), "The increase of joint contact forces in foot joints with simulated subtalar fusion in healthy subjects", Gait Posture, vol. 74, pp. 27-32. [DOI]	orthopedicsfoot
2019	Kitagawa K, Nishisako Y, Nagasaki T, Nakano S, Wada C (2019), "MUSCULOSKELETAL SIMULATION OF THE RELATIONSHIP BETWEEN FOOT POSITION AND STRESS OF THE L4–L5 JOINT IN SUPPORTING STANDING-UP MOTION TO PREVENT LOW BACK PAIN AMONG CAREGIVERS", J. Mech. Med. Biol., vol. 19, pp. 1940016. [DOI]	work place ergonomicsspine
2019	Konrath JM, Karatsidis A, Schepers HM, Bellusci G, de Zee M, Andersen MS (2019), "Estimation of the Knee Adduction Moment and Joint Contact Force during Daily Living Activities Using Inertial Motion Capture", Sensors , vol. 19. [DOI]	orthopedicsknee
2019	Kuai S, Guan X, Liu W, Ji R, Xiong J, Wang D, Zhou W (2019), "Prediction of the Spinal Musculoskeletal Loadings during Level Walking and Stair Climbing after Two Types of Simulated Interventions in Patients with Lumbar Disc Herniation", J. Healthc. Eng., vol. 2019, pp. 6406813. [DOI]	orthopedicsspinegait
2019	Liu T, Khalaf K, Adeeb S, El-Rich M (2019), "Numerical Investigation of Intra-abdominal Pressure Effects on Spinal Loads and Load-Sharing in Forward Flexion", Front Bioeng Biotechnol, vol. 7, pp. 428. [DOI]	spineFEAvalidation
2019	Liu T, Khalaf K, Adeeb S, El-Rich M (2019), "Effects of lumbo-pelvic rhythm on trunk muscle forces and disc loads during forward flexion: A combined musculoskeletal and finite element simulation study", J. Biomech., vol. 82, pp. 116-123. [DOI]	spineFEA
2019	Lund M, Rasmussen J, Andersen M (2019), "AnyPyTools: A Python package for reproducible research with the AnyBody Modeling System", JOSS, vol. 4, pp. 1108. [DOI, WWW]	methods
2019	Lunn DE, De Pieri E, Chapman GJ, Lund ME, Redmond AC, Ferguson SJ (2019), "Current Preclinical Testing of New Hip Arthroplasty Technologies Does Not Reflect Real-World Loadings: Capturing Patient-Specific and Activity-Related Variation in Hip Contact Forces", J. Arthroplasty, vol. 0. [DOI]	orthopedicshiplower extremitygait
2019	Mannisi M, Dell'Isola A, Andersen MS, Woodburn J (2019), "Effect of lateral wedged insoles on the knee internal contact forces in medial knee osteoarthritis", Gait Posture, vol. 68, pp. 443-448. [DOI]	orthopedicskneegait
2019	Moore CW (2019), "Development of a Task Analysis Tool to Estimate Shoulder Strain During a Lifting Task", Ph.D. Thesis, West Virginia University. [DOI, WWW]	work place ergonomicsshouldervalidation
2019	Nakashima M, Kanie R, Shimana T, Matsuda Y, Kubo Y (2019), "Development of a comprehensive method for musculoskeletal simulation in swimming using motion capture data", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337119838395. [DOI]	sports
2019	Oomen P (2019), "Simulating gait in patients with knee osteoarthritis", Thesis, Universiteit Maastricht, The Netherlands. [WWW]	lower extremitykneegaitmethods
2019	Rasmussen J (2019), "Predictive Models in Biomechanics", In: Biomechanics in Medicine and Biology, pp. 98-106. [DOI]	sportsmethods
2019	Rodrigues C, Correia M, Abrantes J, Nadal J, Benedetti M (2019), "Combined Phase and Magnitude Metric for Validation of Lower Limb Multibody Dynamics Muscle Action with sEMG", In: World Congress on Medical Physics and Biomedical Engineering 2018, pp. 517-521. [DOI]	lower extremityvalidation
2019	Simonsen MB, Yurtsever A, Næsborg-Andersen K, Leutscher PDC, Hørslev-Petersen K, Andersen MS, Hirata RP (2019), "Tibialis posterior muscle pain effects on hip, knee and ankle gait mechanics", Hum. Mov. Sci., vol. 66, pp. 98-108. [DOI]	orthopedicshipkneeanklegait
2019	Simonsen MB, Yurtsever A, Næsborg-Andersen K, Leutscher PDC, Hørslev-Petersen K, Hirata RP, Andersen MS (2019), "A parametric study of effect of experimental tibialis posterior muscle pain on joint loading and muscle forces-Implications for patients with rheumatoid arthritis?", Gait Posture, vol. 72, pp. 102-108. [DOI]	lower extremityanklefootgait
2019	Skendraoui N, Bogard F, Murer S, Ahram TZ, Fiok K, Taiar R (2019), "The Musculoskeletal Contribution in Wheelchair Propulsion Systems: Numerical Analysis", In: Advances in Ergonomics in Design, pp. 251-260. [DOI]	upper extremityshoulderrehab
2019	Skubich J, Piszczatowski S (2019), "Model of loadings acting on the femoral bone during gait", J. Biomech., vol. 87, pp. 54-63. [DOI]	orthopedicslower extremitygait
2019	Spada S, Ghibaudo L, Carnazzo C, Di Pardo M, Chander DS, Gastaldi L, Cavatorta MP (2019), "Physical and Virtual Assessment of a Passive Exoskeleton", In: Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 247-257. [DOI]	exoskeletonwork place ergonomicslower extremityvalidation
2019	Theodorakos I, Savonnet L, Beurier G, Wang X (2019), "Can Computationally Predicted Internal Loads Be Used to Assess Sitting Discomfort? Preliminary Results", In: Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 447-456. [DOI]	furniturespineseating
2019	Theodorakos I, Wang X (2019), "Evaluation of a modelling workflow to obtain subject specific spine geometry for sitting postures", IJHFMS, vol. 7, pp. 87. [DOI, WWW]	spinemethods
2019	Wang H, Sun Y, Tian Y (2019), "Mechanical Structure Design and Robust Adaptive Integral Backstepping Cooperative Control of a New Lower Back Exoskeleton", STUD INFORM CONTROL, vol. 28. [DOI, WWW]	exoskeletonrehab
2019	Wu JZ, Sinsel EW, Carey RE, Zheng L, Warren CM, Breloff SP (2019), "Biomechanical modeling of deep squatting: Effects of the interface contact between posterior thigh and shank", J. Biomech., vol. 96, pp. 109333. [DOI]	work place ergonomicsknee
2019	Xu C, Reifman J, Baggaley M, Edwards WB, Unnikrishnan G (2019), "Individual differences in women during walking affect tibial response to load carriage: The importance of individualized musculoskeletal finite-element models", IEEE Trans. Biomed. Eng.. [DOI]	defenselower extremitygaitFEA
2019	Xu J, Li Y, Xu L, Peng C, Chen S, Liu J, Xu C, Cheng G, Xu H, Liu Y, Chen J (2019), "A Multi-Mode Rehabilitation Robot With Magnetorheological Actuators Based on Human Motion Intention Estimation", IEEE Trans. Neural Syst. Rehabil. Eng., vol. 27, pp. 2216-2228. [DOI]	exoskeletonlower extremityrehab
2019	Xunjian F, Zhenxian C, Zhuo C, Zhihui X, Zhongmin J (2019), "Combined Musculoskeletal Multi-Body Dynamics and Finite Element Investigation for Customized Scapular Locking Plate (in Chinese)", J. Xi'an Jiaotong Univ./Xi'an Jiaotong Daxue Xuebao, vol. 53, pp. 168-176. [DOI]	orthopedicsshoulderFEA
2019	Zadoń H, Michnik R, Nowakowska K, Myśliwiec A (2019), "Assessment of Loads Exerted on the Lumbar Segment of the Vertebral Column in Everyday-Life Activities – Application of Methods of Mathematical Modelling", In: Information Technology in Biomedicine, pp. 554-565. [DOI]	work place ergonomicsspine
2019	Zhang Y, Chen Z, Zhao H, Liang X, Sun C, Jin Z (2019), "Musculoskeletal modeling of total ankle arthroplasty using force-dependent kinematics for predicting in vivo joint mechanics", Proc. Inst. Mech. Eng. H, pp. 954411919890724. [DOI]	orthopedicsanklegait
2019	Zhou* J, Wiggermann N (2019), "Physical Stresses on Caregivers when Pulling Patients Up in Bed: Effect of Repositioning Aids and Patient Weight", Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 63, pp. 1057-1061. [DOI]	work place ergonomics
2018	Andersen MS (2018), "How sensitive are predicted muscle and knee contact forces to normalization factors and polynomial order in the muscle recruitment criterion formulation?", International Biomechanics, vol. 5, pp. 88-103. [DOI]	kneesensitivity analysis
2018	Arshad R, Angelini L, Zander T, Di Puccio F, El-Rich M, Schmidt H (2018), "Spinal loads and trunk muscles forces during level walking - A combined in vivo and in silico study on six subjects", J. Biomech., vol. 70, pp. 113-123. [DOI]	spinegait
2018	Bardin A, Wang J, Rogers CW, Colborne GR (2018), "A PRELIMINARY ANYBODY MODEL OF THE EQUINE FORELIMB FOR MOTION SIMULATIONS", International Conference on Equine Exercise Physiology (ICEEP) X, Lorne, Australia.	animal
2018	Behjati M, Arjmand N (2018), "Biomechanical Assessment of the NIOSH Lifting Equation in Asymmetric Load-Handling Activities Using a Detailed Musculoskeletal Model", Hum. Factors, vol. 61, pp. 18720818795038. [DOI]	work place ergonomicsspine
2018	Benditz A, Auer S, Spörrer JF, Wolkerstorfer S, Grifka J, Suess F, Dendorfer S (2018), "Regarding loads after spinal fusion, every level should be seen separately: a musculoskeletal analysis", Eur. Spine J., vol. 27, pp. 1905-1910. [DOI]	orthopedicsspine
2018	Bitter T (2018), "A finite element approach for wear prediction at the taper junction in modular total hip arthroplasty", Ph.D. Thesis, [Sl: sn].	orthopedicshipgaitFEA
2018	Chander DS, Cavatorta MP (2018), "Multi-directional one-handed strength assessments using AnyBody Modeling Systems", Appl. Ergon., vol. 67, pp. 225-236. [DOI]	upper extremityvalidation
2018	Chen Z, Gao Y, Chen S, Zhang Q, Zhang Z, Zhang J, Zhang X, Jin Z (2018), "Biomechanics and wear comparison between mechanical and kinematic alignments in total knee arthroplasty", Proc. Inst. Mech. Eng. H, pp. 954411918811855. [DOI]	orthopedicskneegait
2018	Chowdhury SK, Nimbarte AD, Hsiao H, Gopalakrishnan B, Jaridi M (2018), "A biomechanical shoulder strain index based on stabilizing demand of shoulder joint", Ergonomics, vol. 61, pp. 1657-1670. [DOI]	work place ergonomicsshouldermethods
2018	David S, Mundt M, Komnik I, Potthast W (2018), "Understanding cutting maneuvers - The mechanical consequence of preparatory strategies and foot strike pattern", Hum. Mov. Sci., vol. 62, pp. 202-210. [DOI]	sports
2018	De Pieri E, Lund ME, Gopalakrishnan A, Rasmussen KP, Lunn DE, Ferguson SJ (2018), "Refining muscle geometry and wrapping in the TLEM 2 model for improved hip contact force prediction", PLoS One, vol. 13, pp. e0204109. [DOI]	hiplower extremitymethods
2018	Diao H, Xin H, Jin Z (2018), "Prediction of in vivo lower cervical spinal loading using musculoskeletal multi-body dynamics model during the head flexion/extension, lateral bending and axial rotation", Proc. Inst. Mech. Eng. H, vol. 232, pp. 1071-1082. [DOI]	spinevalidation
2018	Dzialo CM, Pedersen PH, Simonsen CW, Jensen KK, de Zee M, Andersen MS (2018), "Development and validation of a subject-specific moving-axis tibiofemoral joint model using MRI and EOS imaging during a quasi-static lunge", J. Biomech., vol. 72, pp. 71-80. [DOI]	orthopedicskneemethods
2018	Fischer MCM, Eschweiler J, Schick F, Asseln M, Damm P, Radermacher K (2018), "Patient-specific musculoskeletal modeling of the hip joint for preoperative planning of total hip arthroplasty: A validation study based on in vivo measurements", PLoS One, vol. 13, pp. e0195376. [DOI]	orthopedicshipgaitvalidation
2018	Fournier B (2018), "Model and Characterization of a Passive Biomimetic Ankle for Lower Extremity Powered Exoskeleton", . [DOI]	exoskeletonlower extremityanklegaitrehab
2018	Fournier BN, Lemaire ED, Smith AJJ, Doumit M (2018), "Modeling and Simulation of a Lower Extremity Powered Exoskeleton", IEEE Trans. Neural Syst. Rehabil. Eng., vol. 26, pp. 1596-1603. [DOI]	exoskeletonspinelower extremitygait
2018	Haberer C, David S, Weiss S, Potthast W, Komnik I, Funken J (2018), "Data from: Compromised knee internal rotation in total knee arthroplasty patients during stair climbing", . [DOI]	orthopedicskneegait
2018	Hu J, Chen Z, Xin H, Zhang Q, Jin Z (2018), "Musculoskeletal multibody dynamics simulation of the contact mechanics and kinematics of a natural knee joint during a walking cycle", Proc. Inst. Mech. Eng. H, vol. 232, pp. 508-519. [DOI]	kneegaitFEA
2018	Ignasiak D, Peteler T, Fekete TF, Haschtmann D, Ferguson SJ (2018), "The influence of spinal fusion length on proximal junction biomechanics: a parametric computational study", Eur. Spine J., vol. 27, pp. 2262-2271. [DOI]	orthopedicsspine
2018	Ignasiak D, Rüeger A, Sperr R, Ferguson SJ (2018), "Thoracolumbar spine loading associated with kinematics of the young and the elderly during activities of daily living", J. Biomech., vol. 70, pp. 175-184. [DOI]	orthopedicsspine
2018	Ignasiak D, Valenzuela W, Reyes M, Ferguson SJ (2018), "The effect of muscle ageing and sarcopenia on spinal segmental loads", Eur. Spine J., vol. 27, pp. 2650-2659. [DOI]	spine
2018	Jeang A, Chiang AJ, Chiang PC, Chiang PS, Tung PY (2018), "Robust parameters determination for ergonomical product design via computer musculoskeletal modeling and multi-objective optimization", Comput. Ind. Eng., vol. 118, pp. 180-201. [DOI, WWW]	sportslower extremitymethods
2018	Jensen EF, Raunsbæk J, Lund JN, Rahman T, Rasmussen J, Castro MN (2018), "Development and simulation of a passive upper extremity orthosis for amyoplasia", J Rehabil Assist Technol Eng, vol. 5, pp. 2055668318761525. [DOI]	exoskeletonupper extremityshoulderrehab
2018	Jeong Y, Chun HJ (2018), "The Biomechanical Effects on the Spine during Gait Using Inverse Dynamics", In: Proceedings of the 4th World Congress on Electrical Engineering and Computer Systems and Science. [DOI, WWW]	spinegaitvalidation
2018	Kang KT, Koh YG, Son J, Jung M, Oh S, Kim SJ, Kim SH (2018), "Biomechanical influence of deficient posterolateral corner structures on knee joint kinematics: A computational study", J. Orthop. Res.. [DOI]	orthopedicskneegaitvalidation
2018	Karatsidis A, Jung M, Martin Schepers H, Bellusci G, de Zee M, Veltink PH, Andersen MS (2018), "Predicting kinetics using musculoskeletal modeling and inertial motion capture", . [WWW]	lower extremitygaitmethods
2018	Kathawala KJ (2018), "Effects of Slips and Trips on Resultant Lumbar Kinematics, Lumbar Muscle Activity and Low-Back Loads", Thesis, Rochester Institute of Technology. [WWW]	spinegait
2018	Kim Y, Jung Y, Choi W, Lee K, Koo S (2018), "Similarities and differences between musculoskeletal simulations of OpenSim and AnyBody modeling system", J. Mech. Sci. Technol., vol. 32, pp. 6037-6044. [DOI]	lower extremitymethods
2018	Kim Y, Lee KM, Koo S (2018), "Joint moments and contact forces in the foot during walking", J. Biomech., vol. 74, pp. 79-85. [DOI]	footgait
2018	Kobayashi Y, Tanaka K (2018), "Evaluation of a Competition Wheelchair Based on Estimation of Muscle Activity for Forward Linear Operation by Using Inverse Dynamics Analysis", Proc. AMIA Annu. Fall Symp., vol. 2, pp. 259. [DOI, WWW]	sportsupper extremityshoulderrehab
2018	Konya MN, Aslan A, Bakbak S (2018), "How is hip prosthesis and proximal femoral nail stability affected by lesser trochanter fractures: A comparative finite element analysis", Eklem Hastalik. Cerrahisi, vol. 29, pp. 79-86. [DOI]	orthopedicshipFEA
2018	Kuai S, Guan X, Zhou W, Zhang R, Ji R, Liao Z, Guo D, Liu W, Wang D (2018), "Continuous lumbar spine rhythms during level walking, stair climbing and trunk flexion in people with and without lumbar disc herniation", Gait Posture, vol. 63, pp. 296-301. [DOI]	orthopedicsspinegait
2018	Leijendekkers RA, Marra MA, Kolk S, van Bon G, Schreurs BW, Weerdesteyn V, Verdonschot N (2018), "Gait symmetry and hip strength in women with developmental dysplasia following hip arthroplasty compared to healthy subjects: A cross-sectional study", PLoS One, vol. 13, pp. e0193487. [DOI]	orthopedicshipgait
2018	Liu T, Khalaf K, Naserkhaki S, El-Rich M (2018), "Load-sharing in the lumbosacral spine in neutral standing & flexed postures - A combined finite element and inverse static study", J. Biomech., vol. 70, pp. 43-50. [DOI]	spineFEA
2018	Lund Ohlsson M, Danvind J, Holmberg LJ (2018), "Shoulder and Lower Back Joint Reaction Forces in Seated Double Poling", J. Appl. Biomech., vol. 34, pp. 369-376. [DOI]	sportsshoulderspine
2018	M. Tröster, U. Scheneider, T. Bauernhansl, J. Rasmussen, M.S. Andersen (2018), "Simulation Framework for Active Upper Limb Exoskeleton", In: RW (Ed): Dritte Transdisziplinäre Konferenz "Technisce Unterstützungssysteme, die die Menschen wirklich wollen" 2018, pp. 345-354.	exoskeletonupper extremity
2018	Marra MA, Heskamp L, Mul K, Lassche S, van Engelen BGM, Heerschap A, Verdonschot N (2018), "Specific muscle strength is reduced in facioscapulohumeral dystrophy: An MRI based musculoskeletal analysis", Neuromuscul. Disord., vol. 28, pp. 238-245. [DOI]	upper extremityshouldermandible
2018	Marra MA, Strzelczak M, Heesterbeek PJC, van de Groes SAW, Janssen D, Koopman BFJM, Verdonschot N, Wymenga AB (2018), "Flexing and downsizing the femoral component is not detrimental to patellofemoral biomechanics in posterior-referencing cruciate-retaining total knee arthroplasty", Knee Surg. Sports Traumatol. Arthrosc., vol. 26, pp. 3377-3385. [DOI]	orthopedicsknee
2018	Mundt M, Koeppe A, Bamer F, Potthast W, Markert B (2018), "[No title]", . [WWW]	gaitmethods
2018	Mundt M, Koeppe A, Bamer F, Potthast W, Markert B (2018), "[No title]", . [WWW]	sportsmethods
2018	Niu K, Anijs T, Sluiter V, Homminga J, Sprengers A, Marra MA, Verdonschot N (2018), "In situ comparison of A-mode ultrasound tracking system and skin-mounted markers for measuring kinematics of the lower extremity", J. Biomech., vol. 72, pp. 134-143. [DOI]	lower extremitykneemethods
2018	Niu W, Wang L, Jiang C, Zhang M (2018), "Effect of Dropping Height on the Forces of Lower Extremity Joints and Muscles during Landing: A Musculoskeletal Modeling", J. Healthc. Eng., vol. 2018, pp. 2632603. [DOI]	hiplower extremitykneeankle
2018	Oefner C, Kruber D, Rickert C, Voigt C, Schoenfelder S, Hierl T (2018), "Osteosynthese des Unterkiefergelenkhalses – eine vergleichende biomechanische Analyse der Festigkeit von vier Versorgungssystemen", 36. CADFEM ANSYS Simulation Conference, 10-12 Oct. 2018, Leipzig, Germany. [WWW]	orthopedicsmandibleFEA
2018	Peng Y, Zhang Z, Gao Y, Chen Z, Xin H, Zhang Q, Fan X, Jin Z (2018), "Concurrent prediction of ground reaction forces and moments and tibiofemoral contact forces during walking using musculoskeletal modelling", Med. Eng. Phys., vol. 52, pp. 31-40. [DOI]	orthopedicskneemethods
2018	Reilly M, Kontson K (2018), "Computational musculoskeletal modeling of compensatory movements in the upper limb", RESNA 2018 Annual Conference, Arlington, VA, USA July 11-15, 2018.	upper extremityspinerehab
2018	Richards RE, Andersen MS, Harlaar J, van den Noort JC (2018), "Relationship between knee joint contact forces and external knee joint moments in patients with medial knee osteoarthritis: effects of gait modifications", Osteoarthritis Cartilage, vol. 26, pp. 1203-1214. [DOI]	orthopedicskneegait
2018	Richards RE, Andersen MS, Harlaar J, van den Noort JC (2018), "Relationship between knee joint contact forces and external knee joint moments in patients with medial knee osteoarthritis: effects of gait modifications", Osteoarthritis Cartilage, vol. 26, pp. 1203-1214. [DOI]	orthopedicskneegaitvalidation
2018	Ro J, Kim C, Kim JS, Yoo OS (2018), "CONTACT MECHANICS AND MUSCLE STABILITY OF TOTAL KNEE ARTHROPLASTY DURING SQUATTING AND WALKING: A SIMULATION STUDY", Orthopaedic Proceedings, vol. 99-B, pp. 118-118. [WWW]	orthopedicskneegait
2018	Ruggiero A, Merola M, Affatato S (2018), "Finite Element Simulations of Hard-On-Soft Hip Joint Prosthesis Accounting for Dynamic Loads Calculated from a Musculoskeletal Model during Walking", Materials , vol. 11. [DOI]	orthopedicshipgaitFEA
2018	Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M (2018), "Analysis of Forearm Muscle Activity Aiming at Prevention of Refractory Tennis Elbow", M Orthop Musc Syst., vol. 2, pp. 1002.	orthopedicssports
2018	Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M (2018), "Tennis Elbow: Comparison of One- Handed Backhand Stroke Form", SM Orthop Musc Syst., vol. 2, pp. 1002. [WWW]	orthopedicssportselbow
2018	Schmitz P, Cornelius Neumann C, Neumann C, Nerlich M, Dendorfer S (2018), "Biomechanical analysis of iliac crest loading following cortico-cancellous bone harvesting", J. Orthop. Surg. Res., vol. 13, pp. 108. [DOI]	orthopedicsFEA
2018	Stensgaard Stoltze J, Rasmussen J, Skipper Andersen M (2018), "On the biomechanical relationship between applied hip, knee and ankle joint moments and the internal knee compressive forces", International Biomechanics, vol. 5, pp. 63-74. [DOI]	orthopedicskneegait
2018	Theodorakos I, Rueterbories J, Lund ME, Eils E, Andersen MS, De Zee M, Kersting UG (2018), "Effects of a semi-rigid ankle brace on ankle joint loading during landing on inclined surfaces", International Biomechanics, vol. 5, pp. 46-56. [DOI]	exoskeletonankle
2018	Tröster M, Schneider U, Bauernhansl T, Rasmussen J, Andersen MS (2018), "Simulation Framework for Active Upper Limb Exoskeleton Design Optimization Based on Musculoskeletal Modeling", In: Smart ASSIST, pp. 345-353.	exoskeletonupper extremity
2018	Wolf A, Wartzack S (2018), "PARAMETRIC MOVEMENT SYNTHESIS: TOWARDS VIRTUAL OPTIMISATION OF MAN-MACHINE INTERACTION IN ENGINEERING DESIGN", In: Proceedings of the DESIGN 2018 15th International Design Conference, pp. 941-952. [DOI, WWW]	methods
2018	ZeYu Huang YN, Xu B, Shen B, Kraus VB, Pei F (2018), "Evidence and mechanism by which upper partial fibulectomy improves knee biomechanics and decreases knee pain of osteoarthritis", J. Orthop. Res.. [DOI]	orthopedicskneegait
2018	Zoltan FA, Veronica A, Inocenţiu M, Silviu BI, Mikloş KR, Cerasela PD, Stanciu BS (2018), "Biomechanical Simulation of Different Postures Obtained from Three Sport Branches", In: 2018 IEEE 16th International Symposium on Intelligent Systems and Informatics (SISY), pp. 000305-000310. [DOI]	sports
2018	智久 加藤, 隆直 藤井, 求 中島, 弘恭 金髙, 紳一 出江 (2018), "手すりを用いた高齢者起立動作の筋骨格シミュレーション解析", バイオエンジニアリング講演会講演論文集, vol. 2018.30, pp. 2D16. [DOI]	rehab
2017	Angelini L, Damm P, Zander T, Arshad R, Di Puccio F, Schmidt H (2017), "Effect of arm swinging on lumbar spine and hip joint forces", J. Biomech.. [DOI]	spinehipkneegait
2017	Arshad R, Zander T, Bashkuev M, Schmidt H (2017), "Influence of spinal disc translational stiffness on the lumbar spinal loads, ligament forces and trunk muscle forces during upper body inclination", Med. Eng. Phys., vol. 46, pp. 54-62. [DOI]
2017	Atici H, Gonen D, Oral A, Kaya B (2017), "Ergonomic Analysis of an Assembly Line Using the AnyBody Modeling System", International Conference of Management and Industrial Engineering. [WWW]	work place ergonomicsshoulderspine
2017	Bajelan S, Nagano H, Sparrow T, Begg RK (2017), "Effects of wide step walking on swing phase hip muscle forces and spatio-temporal gait parameters", In: 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 954-957. [DOI]	lower extremitygait
2017	Bassani T, Stucovitz E, Qian Z, Briguglio M, Galbusera F (2017), "Validation of the AnyBody full body musculoskeletal model in computing lumbar spine loads at L4L5 level", J. Biomech., vol. 58, pp. 89-96. [DOI]	spinevalidation
2017	Bayoglu R, Geeraedts L, Groenen KH, Verdonschot N, Koopman B, Homminga J (2017), "Twente spine model: A complete and coherent dataset for musculo-skeletal modeling of the lumbar region of the human spine", J. Biomech., vol. 53, pp. 111-119. [DOI]	spine
2017	David S, Komnik I, Peters M, Funken J, Potthast W (2017), "Identification and risk estimation of movement strategies during cutting maneuvers", J. Sci. Med. Sport. [DOI]	orthopedicssportsknee
2017	Dell'Isola A, Smith SL, Andersen MS, Steultjens M (2017), "Knee internal contact force in a varus malaligned phenotype in knee osteoarthritis (KOA)", Osteoarthritis Cartilage, vol. 25, pp. 2007-2013. [DOI]	orthopedicskneegait
2017	Eltoukhy M, Kuenze C, Andersen MS, Oh J, Signorile J (2017), "Prediction of ground reaction forces for Parkinson's disease patients using a kinect-driven musculoskeletal gait analysis model", Med. Eng. Phys., vol. 50, pp. 75-82. [DOI]	gaitmethods
2017	Farahmand F, Hosseini SH, Seifi MM (2017), "Analysis of quadriceps muscles force and activity of a 3-Dimensional musculoskeletal model", Journal of Advanced Sport Technology, vol. 1, pp. 7-15.	lower extremity
2017	Fournier B, Smith AJ, Doumit M, Lemaire ED (2017), "MODELLING AND SIMULATION OF LOWER EXTREMITY POWERED EXOSKELETON", In: RESNA 2017 - Rehabilitation Engineering and Assistive Technology Society of North America annual conference, June 26-30, 2017, New Orleans, LA.	exoskeletonlower extremitygait
2017	Garijo N, Verdonschot N, Engelborghs K, García-Aznar JM, Pérez MA (2017), "Subject-specific musculoskeletal loading of the tibia: Computational load estimation", J. Mech. Behav. Biomed. Mater., vol. 65, pp. 334-343. [DOI]	lower extremitygaitmethodsFEA
2017	Halonen KS, Dzialo CM, Mannisi M, Venäläinen MS, de Zee M, Andersen MS (2017), "Workflow assessing the effect of gait alterations on stresses in the medial tibial cartilage - combined musculoskeletal modelling and finite element analysis", Sci. Rep., vol. 7, pp. 17396. [DOI]	orthopedicskneegaitmethodsFEA
2017	Hejazi S, Rouhi G, Rasmussen J (2017), "The effects of gastrocnemius-soleus muscle forces on ankle biomechanics during triple arthrodesis", Comput. Methods Biomech. Biomed. Engin., vol. 20, pp. 130-141. [DOI]	orthopedicsanklegaitFEAvalidation
2017	Inose H, Mohri S, Arakawa H, Okui M, Koide K, Yamada Y, Kikutani I, Nakamura T (2017), "Semi-endoskeleton-type waist assist AB-wear suit equipped with compressive force reduction mechanism", In: 2017 IEEE International Conference on Robotics and Automation (ICRA), pp. 6014-6019. [DOI]	exoskeletonwork place ergonomicsspine
2017	Jung Y, Koo YJ, Koo S (2017), "Simultaneous estimation of ground reaction force and knee contact force during walking and squatting", International Journal of Precision Engineering and Manufacturing, vol. 18, pp. 1263-1268. [DOI]	orthopedicskneegaitvalidation
2017	Kang KT, Koh YG, Jung M, Nam JH, Son J, Lee YH, Kim SJ, Kim SH (2017), "The effects of posterior cruciate ligament deficiency on posterolateral corner structures under gait- and squat-loading conditions: A computational knee model", Bone Joint Res., vol. 6, pp. 31-42. [DOI]	orthopedicskneegaitsensitivity analysis
2017	Kang KT, Koh YG, Son J, Kim SJ, Choi S, Jung M, Kim SH (2017), "Finite Element Analysis of the Biomechanical Effects of 3 Posterolateral Corner Reconstruction Techniques for the Knee Joint", Arthroscopy, vol. 33, pp. 1537-1550. [DOI]	orthopedicskneegaitFEA
2017	Kilic H, Ozcan C, Efe H, Kasal A (2017), "Computer aided ergonomics in furniture design: baby crib case study", In: The XXVIIITH International conference Research for Furniture Industry, Poznan, Poland, 21-22 September 2017.	work place ergonomicsspine
2017	Kloster BV, Iversen K (2017), "Parameterizing Running Kinematics", Masters Thesis, Aalborg University. [WWW]	gaitmethods
2017	Kuai S, Liu W, Ji R, Zhou W (2017), "The Effect of Lumbar Disc Herniation on Spine Loading Characteristics during Trunk Flexion and Two Types of Picking Up Activities", J. Healthc. Eng., vol. 2017. [DOI, WWW]	work place ergonomicsspine
2017	Kuai S, Zhou W, Liao Z, Ji R, Guo D, Zhang R, Liu W (2017), "Influences of lumbar disc herniation on the kinematics in multi-segmental spine, pelvis, and lower extremities during five activities of daily living", BMC Musculoskelet. Disord., vol. 18, pp. 216. [DOI]	orthopedicsspinelower extremity
2017	LIa L, Xiang Z, LIUa H, Shao Y, Zhang J (2017), "Design and Simulation of Lower Limb Rehabilitation Robot Based on Human Physiological Characteristics", In: Transdisciplinary Engineering: a Paradigm Shift: Proceedings of the 24th ISPE Inc. International Conference on Transdisciplinary Engineering, July 10-14 2017, pp. 428. [WWW]	exoskeletonlower extremityrehab
2017	Lee H, Jung M, Lee KK, Lee SH (2017), "A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine", Sensors , vol. 17, pp. 299. [DOI]	sportshipkneemethodsvalidation
2017	Lemieux PO, Cresson T, Aissaoui R (2017), "Simultaneous estimation of the path, magnitude and orientation of the femorotibial contact forces using bone geometry constraints: an exploratory numerical study for the stance phase of gait", Multibody Syst. Dyn., vol. 41, pp. 25-45. [DOI]	kneegaitmethods
2017	Letier P, Fau G, Mittag U, Zange J, Rittweger J, Jung M, McIntyre J, Runge A (2017), "SOLEUS: Ankle Foot Orthosis for Space Countermeasure with Immersive Virtual Reality", Book Chapter, In: Wearable Robotics: Challenges and Trends, pp. 305-309. [DOI, WWW]	exoskeletonaerospacelower extremity
2017	Li X, Komeili A, Gül M, El-Rich M (2017), "A framework for evaluating muscle activity during repetitive manual material handling in construction manufacturing", Autom. Constr., vol. 79, pp. 39-48. [DOI, WWW]	work place ergonomicsspinevalidation
2017	Liao Z, Lu Z, Peng C, Li Y, Zhang J, Yao L (2017), "Ankle Active Rehabilitation Strategies Analysis Based on the Characteristics of Human and Robotic Integrated Biomechanics Simulation", In: Intelligent Robotics and Applications, pp. 3-13. [DOI]	exoskeletonanklefootrehab
2017	Lund Ohlsson M, Laaksonen MS (2017), "Sitting position affects performance in cross-country sit-skiing", Eur. J. Appl. Physiol., vol. 117, pp. 1095-1106. [DOI]	sportsrehab
2017	Marra MA, Andersen MS, Damsgaard M, BF, Janssen D, Verdonschot N (2017), "Evaluation of a Surrogate Contact Model in Force-Dependent Kinematic Simulations of Total Knee Replacement", J. Biomech. Eng., vol. 139, pp. 081001. [DOI, WWW]	kneegaitmethods
2017	Møller KL, Brauer C, Mikkelsen S, Loft S, Simonsen EB, Koblauch H, Bern SH, Alkjær T, Hertel O, Becker T, Larsen KH, Bonde JP, Thygesen LC (2017), "Copenhagen Airport Cohort: air pollution, manual baggage handling and health", BMJ Open, vol. 7. [DOI]	work place ergonomics
2017	Møller SP, Brauer C, Mikkelsen S, Alkjær T, Koblauch H, Pedersen EB, Simonsen EB, Thygesen LC (2017), "Risk of subacromial shoulder disorder in airport baggage handlers: combining duration and intensity of musculoskeletal shoulder loads", Ergonomics, pp. 1-29. [DOI]	orthopedicswork place ergonomicsshoulder
2017	Noor NS, Ghazalli Z, Rejab MR, Fauzi FA, Mamat R, Kadirgama K, Sani MS, Ahmad Z, Johari NH (2017), "A Comparison of Muscular Activity Among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method", Adv. Sci. Lett., vol. 23, pp. 11471-11474. [DOI, WWW]	automotiveseating
2017	Nowakowska K, Gzik M, Michnik R, Myśliwiec A, Jurkojć J, Suchoń S, Burkacki M (2017), "The Loads Acting on Lumbar Spine During Sitting Down and Standing Up", Book Chapter, In: Innovations in Biomedical Engineering, pp. 169-176. [DOI, WWW]	spine
2017	Nowakowska K, Michnik R, Jochymczyk-Woźniak K, Jurkojć J, Kopyta I (2017), "Evaluation of Locomotor Function in Patients with CP Based on Muscle Length Changes", In: Innovations in Biomedical Engineering, pp. 161-168. [DOI]	gait
2017	Ogrodnik J, Piszczatowski S (2017), "Influence of modified muscle morphology and activity pattern on the results of musculoskeletal system modelling in cerebral palsy patient", Acta Bioeng. Biomech., vol. 19, pp. 63-75. [WWW]	lower extremitygait
2017	Ohlsson ML, Laaksonen MS (2017), "Erratum to: Sitting position affects performance in cross-country sit-skiing", Eur. J. Appl. Physiol., vol. 117, pp. 2123-2124. [DOI]	sportsrehab
2017	Oliveira AS, Silva PB, Lund ME, Farina D, Kersting UG (2017), "Balance Training Enhances Motor Coordination During a Perturbed Sidestep Cutting Task", J. Orthop. Sports Phys. Ther., vol. 47, pp. 853-862. [DOI]	sportstrunkknee
2017	Plantard P, Muller A, Pontonnier C, Dumont G, Shum HP, Multon F (2017), "Inverse dynamics based on occlusion-resistant Kinect data: Is it usable for ergonomics?", Int. J. Ind. Ergon., vol. 61, pp. 71-80. [DOI, WWW]	work place ergonomicsmethods
2017	Reed SA (2017), "A preliminary musculoskeletal model of the German Shepherd lumbosacral spine: a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Animal Science at Massey University, Manawatū, New Zealand", Ph.D. Thesis, Massey University. [WWW]	spineanimal
2017	Sakai R, Uchino M, Yoneo T, Ohtaki Y, Minehara H, Matsuura T, Gomi T, Ujihira M (2017), "Influence of hooks and a lag screw on internal fixation plates for lateral malleolar fracture: a biomechanical and ergonomic study", J. Orthop. Surg. Res., vol. 12, pp. 34. [DOI]	orthopedicsankleFEA
2017	Skals S, Jung MK, Damsgaard M, Andersen MS (2017), "Prediction of ground reaction forces and moments during sports-related movements", Multibody Syst. Dyn., vol. 39, pp. 175-195. [DOI]	sportsvalidation
2017	Skals S, Rasmussen KP, Bendtsen KM, Yang J, Andersen MS (2017), "A musculoskeletal model driven by dual Microsoft Kinect Sensor data", Multibody Syst. Dyn., pp. 1-20. [DOI, WWW]	upper extremitylower extremitygaitmethods
2017	Skipper Andersen M, de Zee M, Damsgaard M, Nolte D, Rasmussen J (2017), "Introduction to Force-Dependent Kinematics: Theory and Application to Mandible Modeling", J. Biomech. Eng., vol. 139, pp. 091001. [DOI]	mandiblemethods
2017	Tagawa Y, Yamamoto N, Omoto M, Matsuse H, Shiba N (2017), "Simulation of oxygen uptake and leg joint reaction force during ergometer exercise under altered gravity", In: 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1901-1904. [WWW]	lower extremity
2017	Van Houcke J, Schouten A, Steenackers G, Vandermeulen D, Pattyn C, Audenaert EA (2017), "Computer-based estimation of the hip joint reaction force and hip flexion angle in three different sitting configurations", Appl. Ergon., vol. 63, pp. 99-105. [DOI]	orthopedicsautomotivehip
2017	Vanheule V, Delport HP, Andersen MS, Scheys L, Wirix-Speetjens R, Jonkers I, Victor J, Vander Sloten J (2017), "Evaluation of predicted knee function for component malrotation in total knee arthroplasty", Med. Eng. Phys., vol. 40, pp. 56-64. [DOI]	orthopedicskneemethods
2017	Wang X, Ma Y, Hou BY, Lam WK (2017), "Influence of Gait Speeds on Contact Forces of Lower Limbs", J. Healthc. Eng., vol. 2017. [DOI, WWW]	gait
2017	Wunsch T, Alexander N, Kröll J, Stöggl T, Schwameder H (2017), "Effects of a leaf spring structured midsole on joint mechanics and lower limb muscle forces in running", PLoS One, vol. 12, pp. e0172287. [DOI]	foot
2017	Xu C, Silder A, Zhang J, Reifman J, Unnikrishnan G (2017), "A cross-sectional study of the effects of load carriage on running characteristics and tibial mechanical stress: implications for stress-fracture injuries in women", BMC Musculoskelet. Disord., vol. 18, pp. 125. [DOI]	lower extremitygaitFEAvalidation
2017	Yin W, Ren S, Huang H, Yu Y, Liang Z, Ao Y, Rong Q (2017), "Dynamical Characteristics of Anterior Cruciate Ligament Deficiency Combined Meniscus Injury Knees", Book Chapter, In: Fei M, Ma S, Li X, Sun X, Jia L, Su Z (Ed): Advanced Computational Methods in Life System Modeling and Simulation, pp. 132-139. [DOI, WWW]	orthopedicskneegait
2017	Zhang J, Chen Z, Wang L, Li D, Jin Z (2017), "A patient-specific wear prediction framework for an artificial knee joint with coupled musculoskeletal multibody-dynamics and finite element analysis", Tribol. Int., vol. 109, pp. 382-389. [DOI, WWW]	orthopedicskneegaitFEA
2017	Zhou L, Bai S, Li Y (2017), "Energy Optimal Trajectories in Human Arm Motion Aiming for Assistive Robots", MIC, vol. 38, pp. 11-19. [DOI, WWW]	exoskeletonupper extremity
2017	Zhou L, Li Y, Bai S (2017), "A human-centered design optimization approach for robotic exoskeletons through biomechanical simulation", Rob. Auton. Syst., vol. 91, pp. 337-347. [DOI, WWW]	exoskeletonupper extremityshoulderrehab
2016	Abdul Majid NA, Mohamaddan S, Omiya T, Notomi M (2016), "Musculoskeletal model of awkward carrying postures", Cogent Engineering, vol. 3, pp. 1256073. [DOI, WWW]	work place ergonomicsspinevalidation
2016	Al-Munajjed AA, Bischoff JE, Dharia MA, Telfer S, Woodburn J, Carbes S (2016), "Metatarsal Loading During Gait-A Musculoskeletal Analysis", J. Biomech. Eng., vol. 138, pp. 4032413. [DOI]	orthopedicsfootgait
2016	Alexander N, Schwameder H (2016), "Lower limb joint forces during walking on the level and slopes at different inclinations", Gait Posture, vol. 45, pp. 137-142. [DOI]	gait
2016	Alexander N, Schwameder H (2016), "Comparison of Estimated and Measured Muscle Activity During Inclined Walking", J. Appl. Biomech., vol. 32, pp. 150-159. [DOI]	lower extremitygaitvalidation
2016	Alexander N, Schwameder H (2016), "Effect of sloped walking on lower limb muscle forces", Gait Posture, vol. 47, pp. 62-67. [DOI]	sportslower extremitygaitrehab
2016	Ardestani MM, Moazen M (2016), "How human gait responds to muscle impairment in total knee arthroplasty patients: Muscular compensations and articular perturbations", J. Biomech., vol. 49, pp. 1620-1633. [DOI]	orthopedicskneegait
2016	Arshad R, Zander T, Dreischarf M, Schmidt H (2016), "Influence of lumbar spine rhythms and intra-abdominal pressure on spinal loads and trunk muscle forces during upper body inclination", Med. Eng. Phys., vol. 38, pp. 333-338. [DOI]	spinevalidation
2016	Blab F, Avci O, Daub U, Schneider U (2016), "New approaches for analysis in ergonomics: From paper and pencil methods to biomechanical simulation", Book Chapter, In: 16. Internationales Stuttgarter Symposium, pp. 821-835. [DOI, WWW]	work place ergonomicsmethods
2016	Camino Willhuber G, Zderic I, Gras F, Wahl D, Sancineto C, Barla J, Windolf M, Richards RG, Gueorguiev B (2016), "Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study", Int. Orthop., vol. 40, pp. 1537-1543. [DOI]	orthopedicstrunkgait
2016	Carbone V (2016), "Subject-specific lower extremity modeling. Personalization of musculoskeletal models using medical imaging and functional measurements", Thesis, University of Twente, Enschede, Netherlands. [PDF, WWW]	lower extremitymethodsvalidation
2016	Carbone V, van der Krogt MM, Koopman HF, Verdonschot N (2016), "Sensitivity of subject-specific models to Hill muscle-tendon model parameters in simulations of gait", J. Biomech., vol. 49, pp. 1953-1960. [DOI]	lower extremitygait
2016	Chen Z, Jin Z (2016), "Prediction of in-vivo kinematics and contact track of total knee arthroplasty during walking", Biosurface and Biotribology, vol. 2, pp. 86-94. [DOI, WWW]	orthopedicskneegait
2016	Chen Z, Zhang Z, Wang L, Li D, Zhang Y, Jin Z (2016), "Evaluation of a subject-specific musculoskeletal modelling framework for load prediction in total knee arthroplasty", Med. Eng. Phys., vol. 38, pp. 708-716. [DOI]	orthopedicskneevalidation
2016	Cruz Ruiz AL, Pontonnier C, Levy J, Dumont G (2016), "A synergy-based control solution for overactuated characters: Application to throwing", Comput. Animat. Virtual Worlds. [DOI]	upper extremitymethods
2016	David S, Funken J, Potthast W, Blanke A (2016), "Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects", J. R. Soc. Interface, vol. 13. [DOI]	mandibleanimal
2016	David S, Funken J, Potthast W, Blanke A (2016), "Musculoskeletal modelling of the dragonfly mandible system as an aid to understanding the role of single muscles in an evolutionary context", J. Exp. Biol., vol. 219, pp. 1041-1049. [DOI]	mandibleanimal
2016	David S, Peters M, Komnik I, Potthast W (2016), "Victory or defeat. How movement strategies distinguish fast direction changes from cutting maneuvers with high injury risk", In: 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [WWW]	sportsknee
2016	Davoudabadi Farahani S, Svinin M, Andersen MS, de Zee M, Rasmussen J (2016), "Prediction of closed-chain human arm dynamics in a crank-rotation task", J. Biomech., vol. 49, pp. 2684-2693. [DOI]	upper extremitymethodsvalidation
2016	Dupré T, Mortensen KR, Lysdal FG, Funken J, Müller R, Braun M, Krahl H, Kersting U, Potthast W, Pforzheim AC (2016), "Hip Joint Load and Muscle Stress in Soccer Inside Passing", In: ISBS-Conference Proceedings Archive, 34th International Conference on Biomechanics in Sport. [WWW]	sports
2016	Eddy M, Moore C, Nimbarte A (2016), "Evaluation of shoulder strain during multi-directional forceful arm exertions", Occup. Ergonomics, vol. 13, pp. 131-138. [WWW]	work place ergonomicsshoulder
2016	Eschweiler J, Stromps JP, Fischer M, Schick F, Rath B, Pallua N, Radermacher K (2016), "Development of a biomechanical model of the wrist joint for patient-specific model guided surgical therapy planning: Part 1", Proc. Inst. Mech. Eng. H, vol. 230, pp. 310-325. [DOI]	orthopedicswristupper extremityvalidation
2016	Eschweiler J, Stromps JP, Fischer M, Schick F, Rath B, Pallua N, Radermacher K (2016), "A biomechanical model of the wrist joint for patient-specific model guided surgical therapy: Part 2", Proc. Inst. Mech. Eng. H, vol. 230, pp. 326-334. [DOI]	orthopedicswrist
2016	Farahani SD, Andersen MS, de Zee M, Rasmussen J (2016), "Optimization-based dynamic prediction of kinematic and kinetic patterns for a human vertical jump from a squatting position", Multibody Syst. Dyn., vol. 36, pp. 37-65. [DOI, WWW]	methods
2016	Grüneweller N, Raschke M, Zderic I, Windolf M (2016), "Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a new hemi-pelvis test model", J. Orthop. Res., vol. 35, pp. 1485-1493.	orthopedicsgait
2016	Guan X, Ji L, Wang R, Huang W (2016), "Optimization of an unpowered energy-stored exoskeleton for patients with spinal cord injury", In: 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5030-5033. [DOI]	exoskeletonspinehiprehab
2016	Guzik-Kopyto A, Michnik R, Wodarski P, Chuchnowska I (2016), "Determination of Loads in the Joints of the Upper Limb During Activities of Daily Living", Book Chapter, In: Information Technologies in Medicine, pp. 99-108. [DOI, WWW]	upper extremity
2016	Hangalur G, Brenneman E, Nicholls M, Bakker R, Laing A, Chandrashekar N (2016), "Can a knee brace reduce the strain in the anterior cruciate ligament? A study using combined in vivo/in vitro method", Prosthet. Orthot. Int., vol. 40, pp. 394-399. [DOI]	exoskeletonkneerehab
2016	Hölscher T, Weber T, Lazarev I, Englert C, Dendorfer S (2016), "Influence of rotator cuff tears on glenohumeral stability during abduction tasks", J. Orthop. Res., vol. 34, pp. 1628-1635. [DOI]	orthopedicsupper extremityshoulder
2016	Ignasiak D, Dendorfer S, Ferguson SJ (2016), "Thoracolumbar spine model with articulated ribcage for the prediction of dynamic spinal loading", J. Biomech., vol. 49, pp. 959-966. [DOI]	spinemethods
2016	Ignasiak D, Ferguson SJ, Arjmand N (2016), "A rigid thorax assumption affects model loading predictions at the upper but not lower lumbar levels", J. Biomech., vol. 49, pp. 3074-3078. [DOI]	spine
2016	Jakobsen L, Ahlers FH (2016), "Biomechanical analysis of hand cycling propulsion movement. A musculoskeletal modelling approach and Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics - worksheets", Thesis, Aalborg University, Denmark. [WWW]	sportsupper extremity
2016	Jakobsen L, Ahlers FH (2016), "Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics", Thesis, Aalborg University, Denmark. [PDF, WWW]	sportsupper extremity
2016	Ji Z, Wang H, Jiang G, Li L (2016), "Analysis of Muscle Activity Utilizing Bench Presses in the AnyBody Simulation Modelling System", Modell. Simul. Mater. Sci. Eng., vol. 2016, pp. 1-7. [PDF, DOI, WWW]	sportsvalidation
2016	Jia B, Nussbaum MA (2016), "Development and evaluation of an EMG-based model to estimate lumbosacral loads during seated work", Int. J. Ind. Ergon., vol. 55, pp. 96-102. [DOI, WWW]	spineseatingmethods
2016	Jianbo X, Suihuai Y, Wen F (2016), "Inverse dynamics simulation and quantitative evaluation of comfort level for brake operations on workover rig", In: Robots & Intelligent System (ICRIS), 2016 International Conference on 27-28 August 2016.	work place ergonomics
2016	Jochymczyk-Wozniak K, Jurkojc J, Kopyta I (2016), "Evaluation of Locomotor Function in Patients with CP Based on Muscle Length Changes", Innovations in Biomedical Engineering, vol. 526, pp. 161. [DOI, WWW]	gait
2016	Jung Y, Jung M, Ryu J, Yoon S, Park SK, Koo S (2016), "Dynamically adjustable foot-ground contact model to estimate ground reaction force during walking and running", Gait Posture, vol. 45, pp. 62-68. [DOI]	gaitmethods
2016	Kim Y, Ta D, Jung M, Koo S (2016), "A musculoskeletal lumbar and thoracic model for calculation of joint kinetics in the spine", J. Mech. Sci. Technol., vol. 30, pp. 2891-2897. [DOI, WWW]	spinemethods
2016	Komnik I, Peters M, Funken J, David S, Weiss S, Potthast W (2016), "Non-Sagittal Knee Joint Kinematics and Kinetics during Gait on Level and Sloped Grounds with Unicompartmental and Total Knee Arthroplasty Patients", PLoS One, vol. 11, pp. e0168566. [PDF, DOI]	orthopedicskneegait
2016	Komnik I, Peters M, Potthast W (2016), "Lower limb kinematics and kinetics after total knee arthroplasty surgery during running – a case study", In: 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [PDF, WWW]	orthopedicssportsknee
2016	Lemieux PO, Barré A, Hagemeister N, Aissaoui R (2016), "Degrees of freedom coupling adapted to the upper limb of a digital human model", In: 4th International Digital Human Modeling Symposium. [WWW]	shouldermethods
2016	Marková M, Gallo LM (2016), "The influence of the human TMJ eminence inclination on predicted masticatory muscle forces", Hum. Mov. Sci., vol. 49, pp. 132-140. [DOI]	mandible
2016	Meena VK, Kumar M, Pundir A, Singh S, Goni V, Kalra P, Sinha RK (2016), "Musculoskeletal-based finite element analysis of femur after total hip replacement", Proc. Inst. Mech. Eng. H, vol. 230, pp. 553-560. [DOI]	orthopedicshipFEA
2016	Mehle K, Eckert AW, Gentzsch D, Schwan S, Ludtka CM, Knoll WD (2016), "Evaluation of a new PEEK mandibular reconstruction plate design for continuity defect therapy by finite element analysis", International Journal of New Technology and Research, vol. 2, pp. 65-71. [PDF, WWW]	orthopedicsmandibleFEA
2016	Michael David Stokes CU, Authors (2016), "Design and Initial Verification of a Novel Total Knee Replacement that Incorporates Synthetic Ligaments to Influence Knee Stability", Thesis, Clemson University. [WWW]	orthopedicsknee
2016	Miyoshi T, Asaishi K, Nakamura T, Takagi M (2016), "Master–Slave-Type Gait Training System for Hip Movement Disorders", Sens. Mater., vol. 28, pp. 295–309.	exoskeletongaitrehab
2016	Muehling M, Weber T, Russ P, Dendorfer S (2016), "Prediction of ground reaction forces and moments by using gait analysis silhouette tracking method compared to marker tracking and force platform method", White paper - Simi Reality Motion Systems GmbH. [PDF, WWW]	gaitmethods
2016	Nakashima M, Hosoya T, Shimana T (2016), "Musculoskeletal Simulation of Sports Motion Considering Tension Distribution in a Whole Body Compression Garment", Procedia Engineering, vol. 147, pp. 252-256. [DOI, WWW]	sportsmethods
2016	Ogrodnik J, Piszczatowski S, Syczewska M (2016), "The possibility of evaluation of the pathological muscle function using modelling simulation", Current Research in Motor Control, pp. 192-197. [PDF]	gait
2016	Oosterwaal M (2016), "The Glasgow-Maastricht foot model: development, repeatability and sources of error of a 26 segment multi-body foot model", Thesis, Maastricht University, The Netherlands. [WWW]	footgait
2016	Oosterwaal M, Carbes S, Telfer S, Woodburn J, Tørholm S, Al-Munajjed AA, van Rhijn L, Meijer K (2016), "The Glasgow-Maastricht foot model, evaluation of a 26 segment kinematic model of the foot", J. Foot Ankle Res., vol. 9, pp. 19. [PDF, DOI]	footgaitmethods
2016	Pablo Joaquin Dopico Uof, Authors (2016), "A Subject Specific Surface Electromyography Model For Estimating L4/L5 Compressive Loading", Thesis, University of Tennessee Health Science Center. [DOI, WWW]	spine
2016	Putzer M, Auer S, Malpica W, Suess F, Dendorfer S (2016), "A numerical study to determine the effect of ligament stiffness on kinematics of the lumbar spine during flexion", BMC Musculoskelet. Disord., vol. 17, pp. 95. [DOI]	spinemethods
2016	Putzer M, Ehrlich I, Rasmussen J, Gebbeken N, Dendorfer S (2016), "Sensitivity of lumbar spine loading to anatomical parameters", J. Biomech., vol. 49, pp. 953-958. [DOI]	spinemethods
2016	Ren S (2016), "Biomechanical effects of cranio-cervical positions on cervical musculoskeletal disorders", Thesis, The Hong Kong Polytechnic University. [WWW]	work place ergonomicsspine
2016	Renkawitz T, Weber T, Dullien S, Woerner M, Dendorfer S, Grifka J, Weber M (2016), "Leg length and offset differences above 5mm after total hip arthroplasty are associated with altered gait kinematics", Gait Posture, vol. 49, pp. 196-201. [DOI]	orthopedicshipgait
2016	Rodrigues C, Correia M, Nadal JA, Rodrigues M (2016), "COMPARING MULTIBODY SUBJECT KINEMATICS AND DYNAMICS ON DIFFERENT GAIT MODES", . [PDF, WWW]	gait
2016	Sanford B, Williams J, Zucker-Levin A, Mihalko W (2016), "PEAK HIP, KNEE AND ANKLE JOINT FORCES DURING GAIT AFTER TOTAL KNEE ARTHROPLASTY", Bone Joint J., vol. 98-B, pp. 129-129. [WWW]	orthopedicskneegait
2016	Savonnet L, Duprey S, Wang X (2016), "Coupling rigid multi-body and deformable finite element human models for assessing seat discomfort", DHM 2016, Montreal, 2016. [PDF, WWW]	automotiveseatingFEA
2016	Seo J, Choi J, Kang D, Yang S, Kim D, Tack G (2016), "Forward and inverse dynamic study during pedaling: Comparison between the young and the elderly", Technol. Health Care, vol. 24 Suppl 2, pp. S659-64. [DOI]	validationrehab
2016	Sins L, Tétreault P, Nuño N, Hagemeister N (2016), "Effects of Prosthetic Mismatch and Subscapularis Tear on Glenohumeral Contact Patterns in Total Shoulder Arthroplasty: A Numerical Musculoskeletal Analysis", J. Biomech. Eng., vol. 138. [DOI]	orthopedicsshoulder
2016	Stambolian D, Eltoukhy M, Asfour S (2016), "Development and validation of a three dimensional dynamic biomechanical lifting model for lower back evaluation for careful box placement", Int. J. Ind. Ergon., vol. 54, pp. 10-18. [DOI, WWW]	work place ergonomicsspinevalidation
2016	Theodorakos I, Rueterbories J, Lund ME, Andersen MS, de Zee M, Kersting UG (2016), "Ankle bracing effects on knee and hip mechanics during landing on inclined surfaces", International Biomechanics, vol. 3, pp. 22-32. [DOI, WWW]	exoskeletonhipkneeanklemethodsrehab
2016	Tomaszewski P, Eijkenboom J, Berahmani S, Janssen D, Verdonschot N (2016), "FINITE ELEMENT ASSESSMENT OF INITIAL STABILITY AND BONE REMODELING OF SHORT HIP STEM", Bone Joint J., vol. 98-B, pp. 78-78. [WWW]	orthopedicshipFEA
2016	Trapanese S, Naddeo A, Cappetti N (2016), "A Preventive Evaluation of Perceived Postural Comfort in Car-Cockpit Design: Differences between the Postural Approach and the Accurate Muscular Simulation under Different Load Conditions in the Case of Steering-Wheel Usage", In: SAE Technical Paper Series. [DOI, WWW]	automotiveupper extremityseatingmethods
2016	Upmann A (2016), "Application of digital human modeling for the ergonomic evaluation of handbrakes in passenger vehicles", Ph.D. Thesis, Dissertation, Köln, Deutsche Sporthochschule Köln, 2016. [WWW]	automotiveupper extremityvalidation
2016	Weber T, Dendorfer S, Bulstra SK, Grifka J, Verkerke GJ, Renkawitz T (2016), "Gait six month and one-year after computer assisted Femur First THR vs. conventional THR. Results of a patient- and observer- blinded randomized controlled trial", Gait Posture, vol. 49, pp. 418-425. [DOI]	orthopedicshipgait
2016	Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ (2016), "Musculoskeletal modeling of human lower limb during normal walking, one-legged forward hopping and side jumping: Comparison of measured EMG and predicted muscle activity patterns", J. Biomech., vol. 49, pp. 3660-3666. [DOI]	lower extremityvalidation
2016	Worsley PR, Whatling G, Barrett D, Holt C, Stokes M, Taylor M (2016), "Assessing changes in subjective and objective function from pre- to post-knee arthroplasty using the Cardiff Dempster-Shafer theory classifier", Comput. Methods Biomech. Biomed. Engin., vol. 19, pp. 418-427. [DOI]	orthopedicskneemethods
2016	Xu C, Silder A, Zhang J, Hughes J, Unnikrishnan G, Reifman J, Rakesh V (2016), "An Integrated Musculoskeletal-Finite-Element Model to Evaluate Effects of Load Carriage on the Tibia During Walking", J. Biomech. Eng., vol. 138. [DOI]	defenselower extremitygaitFEAvalidation
2016	Zander T, Dreischarf M, Schmidt H (2016), "Sensitivity analysis of the position of the intervertebral centres of reaction in upright standing--a musculoskeletal model investigation of the lumbar spine", Med. Eng. Phys., vol. 38, pp. 297-301. [DOI]	spinemethods
2015	Ali N (2015), "Predicting risk factors of noncontact anterior cruciate ligament injuries during single-leg landing", Thesis, University of Ottawa, Canada. [PDF, WWW]	orthopedicssportskneevalidation
2015	Ardestani MM, Moazen M, Chen Z, Zhang J, Jin Z (2015), "A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitation", Neurocomputing, vol. 154, pp. 174-188. [DOI, WWW]	orthopedicskneemethodsFEArehab
2015	Ardestani MM, Moazen M, Jin Z (2015), "Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics", Med. Eng. Phys., vol. 37, pp. 165-174. [DOI]	lower extremitygait
2015	Benoit DL, Damsgaard M, Andersen MS (2015), "Surface marker cluster translation, rotation, scaling and deformation: Their contribution to soft tissue artefact and impact on knee joint kinematics", J. Biomech., vol. 48, pp. 2124-2129. [DOI]	kneegaitmethods
2015	Boije M, Jönsson M (2015), "Biomechanical simulations of a flywheel exercise device in microgravity", Thesis, Karolinska Institutet, Sweden. [PDF, WWW]	aerospacesports
2015	Carbone V, Fluit R, Pellikaan P, van der Krogt MM, Janssen D, Damsgaard M, Vigneron L, Feilkas T, Koopman HF, Verdonschot N (2015), "TLEM 2.0 - a comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity", J. Biomech., vol. 48, pp. 734-741. [DOI]	lower extremitymethods
2015	Chen Z, Wang L, Liu Y, He J, Lian Q, Li D, Jin Z (2015), "Effect of component mal-rotation on knee loading in total knee arthroplasty using multi-body dynamics modeling under a simulated walking gait", J. Orthop. Res., vol. 33, pp. 1287-1296. [DOI]	orthopedicskneegait
2015	Cronskär M, Rasmussen J, Tinnsten M (2015), "Combined finite element and multibody musculoskeletal investigation of a fractured clavicle with reconstruction plate", Comput. Methods Biomech. Biomed. Engin., vol. 18, pp. 740-748. [DOI]	orthopedicsshoulderFEA
2015	Cutlip K, Nimbarte AD, Chowdhury SK, Jaridi M (2015), "Evaluation of Shoulder Stability During Forceful Arm Exertions", Industrial and Systems Engineering Review, vol. 3, pp. 49-58. [WWW]	work place ergonomicsshoulder
2015	Davoudabadi Farahani S, Andersen MS, de Zee M, Rasmussen J (2015), "Human arm posture prediction in response to isometric endpoint forces", J. Biomech., vol. 48, pp. 4178-4184. [DOI]	upper extremitymethods
2015	Duprey S, Savonnet L, Black N, Wang X (2015), "Muscle force prediction: can we rely on musculoskeletal model estimations? A case study on push force exertions with the upper limb", Comput. Methods Biomech. Biomed. Engin., vol. 18 Suppl 1, pp. 1934-1935. [DOI]	work place ergonomicsupper extremityvalidation
2015	Efe H, Kasal A, Kiliç H, Ozcan C (2015), "Effect of the Critical Ergonomics Parameters on Domestic Chairs for Comfort using the Human Based Product Development Software", In: The XXVIIth International Conference Research for Furniture Industry. [PDF, WWW]	work place ergonomicsfurnitureseating
2015	Farahani SD, Bertucci W, Andersen MS, de Zee M, Rasmussen J (2015), "Prediction of crank torque and pedal angle profiles during pedaling movements by biomechanical optimization", Struct. Multidiscip. Optim., vol. 51, pp. 251-266. [DOI, WWW]	sportsmethodsvalidation
2015	Fluit R (2015), "Functional outcome prediction after surgery : a bridge too far?", Ph.D. Thesis, University of Twente. [DOI, WWW]	orthopedicslower extremitygaitmethods
2015	Fu Y, Li S, Chen Q, Zhou W (2015), "Modeling and Simulating Lifting Task of Below-Knee Amputees", In: Digital Human Modeling. Applications in Health, Safety, Ergonomics and Risk Management: Ergonomics and Health, pp. 134-143. [DOI, WWW]	work place ergonomicsspinelower extremityrehab
2015	Funken J, Heinrich B, Heinrich K, Felker K, Fett D, Platen P, Brüggemann GP (2015), "Estimating lumbar spine loading during volleyball specific movements using 3d modeling", In: 33rd International Conference on Biomechanics in Sports, Poitiers, France. [PDF, WWW]	sportsspine
2015	Gammelgaard MS (2015), "A general marker-less motion capture approach for the Microsoft Kinect Sensor v2 using subject-specific articulated models within an iterative closest point algorithm for improved anatomical accuracy", Thesis, Aalborg University, Denmark. [WWW]	sportslower extremitymethods
2015	Graichen S (2015), "Biomechanische Betrachtung manueller Montageprozesse – Beitrag zur Bewertung dynamischer Arbeitsformen innerhalb des Greifraums [Biomechanical view on manual assembly processes - Contribution to the evaluation of dynamic work within the space of reach]", Thesis, Karlsruhe Institute of Technology, Germany. [PDF]	work place ergonomics
2015	Graichen S, Stein T, Deml B (2015), "Adaptive Workplace Design Based on Biomechanical Stress Curves", Book Chapter, In: Brecher C (Ed): Advances in Production Technology, pp. 175-183. [DOI, WWW]	work place ergonomicsmethods
2015	Han KS, Nam H, Kim K (2015), "Core muscle Strengthening Effect During Spine Stabilization Exercise", Journal of Electrical Engineering and Technology, vol. 10, pp. 2413-2419. [DOI, WWW]	sportsspinerehab
2015	Kersting U, Theodorakos I, Lund ME, Andersen MS, de Zee M (2015), "Semi-rigid ankle braces and force transfer in the ankle joint when landing on inclined surfaces", Footwear Sci., vol. 7, pp. S19-S21. [DOI]	exoskeletonsportslower extremityanklerehab
2015	Koblauch H (2015), "Low back load in airport baggage handlers", Thesis, University of Copenhagen, Denmark. [PDF]	work place ergonomicsspinevalidation
2015	Kolk S, Fluit R, Luijten J, Heesterbeek PJ, Geurts AC, Verdonschot N, Weerdesteyn V (2015), "Gait and lower limb muscle strength in women after triple innominate osteotomy", BMC Musculoskelet. Disord., vol. 16, pp. 68. [DOI]	orthopedicslower extremitygait
2015	Koning BH, van der Krogt MM, Baten CT, Koopman BF (2015), "Driving a musculoskeletal model with inertial and magnetic measurement units", Comput. Methods Biomech. Biomed. Engin., vol. 18, pp. 1003-1013. [DOI, WWW]	lower extremitygaitmethods
2015	Kulcsar RM, Borozan IS, Argesanu V, Maniu I, Jula M, Streian F, Puta T, Nagel A (2015), "Modeling, simulation and experimental determination of the spine muscle's activities of the driver", Appl. Mech. Mater., vol. 760. [WWW]	automotivespinevalidation
2015	Li J, McWilliams AB, Jin Z, Fisher J, Stone MH, Redmond AC, Stewart TD (2015), "Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking", Clin. Biomech. , vol. 30, pp. 513-519. [DOI]	orthopedicshipgait
2015	Li L, Ji Z, Xia Y, Gong R (2015), "Development and Validation of a Portable Human Body Joint Power Test System", Int. J. Distrib. Sens. Netw., vol. 11, pp. 341072. [DOI]	sportsmethods
2015	Li W, Zhang M, Lv G, Han Q, Gao Y, Wang Y, Tan Q, Zhang M, Zhang Y, Li Z (2015), "Biomechanical response of the musculoskeletal system to whole body vibration using a seated driver model", Int. J. Ind. Ergon., vol. 45, pp. 91-97. [DOI, WWW]	automotiveseating
2015	Lindenroth L, Caplan N, Debuse D, Salomoni SE, Evetts S, Weber T (2015), "A novel approach to activate deep spinal muscles in space—Results of a biomechanical model", Acta Astronaut., vol. 116, pp. 202-210. [DOI, WWW]	aerospacespinevalidation
2015	Lund ME, Andersen MS, de Zee M, Rasmussen J (2015), "Scaling of musculoskeletal models from static and dynamic trials", International Biomechanics, vol. 2, pp. 1-11. [PDF, DOI, WWW]	methodsvalidation
2015	Mabuma J, Schwarze M, Hurschler C, Markert B, Ehlers W (2015), "Effects of osteoarthritis and pathological walking on contact stresses in femoral cartilage", Biomech. Model. Mechanobiol., vol. 14, pp. 1167-1180. [DOI]	orthopedicskneegait
2015	Marie C (2015), "Strength analysis of clavicle fracture fixation devices and fixation techniques using finite element analysis with musculoskeletal force input", Med. Biol. Eng. Comput., vol. 53, pp. 759-769. [DOI]	orthopedicsshoulderFEA
2015	Marra MA, Vanheule V, Fluit R, Koopman BH, Rasmussen J, Verdonschot N, Andersen MS (2015), "A subject-specific musculoskeletal modeling framework to predict in vivo mechanics of total knee arthroplasty", J. Biomech. Eng., vol. 137, pp. 020904. [DOI, WWW]	orthopedicskneegait
2015	Mellon SJ, Grammatopoulos G, Andersen MS, Pandit HG, Gill HS, Murray DW (2015), "Optimal acetabular component orientation estimated using edge-loading and impingement risk in patients with metal-on-metal hip resurfacing arthroplasty", J. Biomech., vol. 48, pp. 318-323. [DOI]	orthopedicshipgait
2015	Mirakhorlo M, Azghani MR (2015), "Similarity of different lifting techniques in trunk muscular synergies", Acta Bioeng. Biomech., vol. 17, pp. 21-29. [WWW]	work place ergonomicsspinelower extremityvalidation
2015	Nedergaard NJ, Heinen F, Sloth S, Holmberg HC, Kersting UG (2015), "Biomechanics of the ski cross start indoors on a customised training ramp and outdoors on snow", Sports Biomech., vol. 14, pp. 273-286. [DOI]	sports
2015	Nishiki T, Tawara D, Tsujikami T, Ninomiya S, Okayama H, Morikawa S, Sakamoto J (2015), "Musculoskeletal simulation for design of supportive underwear for pelvic floor disorder", In: Proceedings 8th Asian-Pasific Conference on Biomechanics, 16-19 September 2015, Sapporo, Japan, pp. 282. [WWW]	FEA
2015	Okamoto Y, Murakami H, Demura S, Kato S, Yoshioka K, Hayashi H, Sakamoto J, Kawahara N, Tsuchiya H (2015), "The effect of kyphotic deformity because of vertebral fracture: a finite element analysis of a 10° and 20° wedge-shaped vertebral fracture model", Spine J., vol. 15, pp. 713-720. [DOI]	orthopedicsspineFEA
2015	Pendergast M, Rusovici R (2015), "A finite element parametric study of clavicle fixation plates", Int. j. numer. method. biomed. eng., vol. 31. [DOI]	orthopedicsshoulderFEA
2015	Pieter Oomen, Janneke Annegarn, John Rasumussen, Jessica Rausch, Karl Siebertz, Lex Verdijk, Maarten Drost, Kenneth Meiler (2015), "Development and validation of a rule-based strength scaling method for musculoskeletal modeling", Int. J. Human Factors Modeling and Simulation, vol. 5, pp. 19-32.	methodsvalidation
2015	Rajaee MA, Arjmand N, Shirazi-Adl A, Plamondon A, Schmidt H (2015), "Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities", Appl. Ergon., vol. 48, pp. 22-32. [DOI]	spinevalidation
2015	Shin YH, Choi JS, Kang DW, Seo JW, Lee JH, Kim JY, Kim DH, Yang ST, Tack GR (2015), "A study on human musculoskeletal model for cycle fitting: comparison with EMG", International Journal of Medical, Health, Pharmaceutical and Biomedical Engineering, vol. 9 . [WWW]	sportsvalidation
2015	Sins L, Tétreault P, Hagemeister N, Nuño N (2015), "Adaptation of the AnyBody™ Musculoskeletal Shoulder Model to the Nonconforming Total Shoulder Arthroplasty Context", J. Biomech. Eng., vol. 137, pp. 101006. [DOI]	orthopedicsupper extremity
2015	Skals SL (2015), "Prediction of ground reaction forces and moments during sports-related movements", Thesis, Aalborg University, Denmark. [PDF, WWW]	sportsmethodsvalidation
2015	Van Branteghem A, Victor J, De Baets P, Verstraete M (2015), "A methodology to develop a patient-specific 3D musculoskeletal model based on MRI, ground reaction forces and motion capture data", SCADA J., vol. 6, pp. 5. [DOI, WWW]	orthopedicskneemethods
2015	Varady PA, Glitsch U, Augat P (2015), "Loads in the hip joint during physically demanding occupational tasks: A motion analysis study", J. Biomech., vol. 48, pp. 3227-3233. [DOI]	orthopedicswork place ergonomicship
2015	Wang X, Wang C, Wang Z, Li H (2015), "Comfort Analysis in EVA Reachable Envelope Based on Human-Spacesuit Integrated Biomechanical Modeling", In: HCI International 2015 - Posters’ Extended Abstracts, pp. 539-545. [DOI, WWW]	aerospacework place ergonomicsupper extremity
2015	Weber TA, Dendorfer S, Grifka J, Verkerke GJ, Renkawitz T (2015), "Does Computer-Assisted Femur First THR Improve Musculoskeletal Loading Conditions?", Biomed Res. Int., vol. 2015, pp. 625317. [DOI]	orthopedicshipmethods
2015	Wunsch T, Alexander N, Kröll J, Schwameder H (2015), "Effects of a leaf spring structured midsole on lower limb muscle forces in running", Footwear Sci., vol. 7, pp. S153-S155. [DOI]	sportslower extremitygait
2015	Yang Y, Xu C, Guan XR, Wang YP (2015), "Numerical Analysis of Comfort of Military Helmets Based on Inverse Dynamics", Acta Armamentarii, vol. 36, pp. 321-326. [WWW]	work place ergonomicsspine
2015	Yoder AJ, Petrella AJ, Silverman AK (2015), "Trunk-pelvis motion, joint loads, and muscle forces during walking with a transtibial amputation", Gait Posture, vol. 41, pp. 757-762. [DOI]	spinegaitrehab
2015	Zander T, Dreischarf M, Schmidt H, Bergmann G, Rohlmann A (2015), "Spinal loads as influenced by external loads: a combined in vivo and in silico investigation", J. Biomech., vol. 48, pp. 578-584. [DOI]	orthopedicsspine
2015	Zhang X, Chen Z, Wang L, Yang W, Li D, Jin Z (2015), "Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation", Proc. Inst. Mech. Eng. H, vol. 229, pp. 477-490. [DOI]	orthopedicshipvalidation
2015	Zhou L, Bai S, Andersen MS, Rasmussen J (2015), "Modeling and Design of a Spring-loaded, Cable-driven, Wearable Exoskeleton for the Upper Extremity", MIC, vol. 36, pp. 167-177. [DOI, WWW]	exoskeletonupper extremitymethodsrehab
2014	Alexander N, Schwameder H (2014), "Analysis of muscle forces during downhill walking", In: eProceedings of the 32nd Conference of the International Society of Biomechanics in Sport; 2014; Johnson City, TN, pp. 199-202. [PDF]	lower extremitygait
2014	Ali N, Andersen MS, Rasmussen J, Robertson DG, Rouhi G (2014), "The application of musculoskeletal modeling to investigate gender bias in non-contact ACL injury rate during single-leg landings", Comput. Methods Biomech. Biomed. Engin., vol. 17, pp. 1602-1616. [DOI]	sportskneevalidation
2014	Ardestani MM, Chen Z, Wang L, Lian Q, Liu Y, He J, Li D, Jin Z (2014), "A neural network approach for determining gait modifications to reduce the contact force in knee joint implant", Med. Eng. Phys., vol. 36, pp. 1253-1265. [DOI]	orthopedicskneegaitmethods
2014	Ardestani MM, Moazen M, Jin Z (2014), "Gait modification and optimization using neural network–genetic algorithm approach: Application to knee rehabilitation", Expert Syst. Appl., vol. 41, pp. 7466-7477. [DOI, WWW]	orthopedicskneegaitmethodsFEArehab
2014	Bajelan S, Azghani MR (2014), "Musculoskeletal modeling and simulation of three various Sit-to-Stand strategies: An evaluation of the biomechanical effects of the chair-rise strategy modification", Technol. Health Care, vol. 22, pp. 627-644. [DOI]	rehab
2014	Basafa E, Murphy RJ, Gordon CR, Armand M (2014), "Modeling the biomechanics of swine mastication--an inverse dynamics approach", J. Biomech., vol. 47, pp. 2626-2632. [DOI]	orthopedicsmandibleanimal
2014	Bonin D, Wischniewski S, Wirsching HJ, Upmann A, Rausch J, Paul G (2014), "Exchanging data between Digital Human Modelling systems : a review of data formats", In: 3rd International Digital Human Modeling Symposium, May 20-22 2014, Odaiba, Tokyo, Japan. Symposium Program and Paper Abstracts. [WWW]	methods
2014	Bosch JB (2014), "Estudio computacional de los sistemas de fijación interna aplicados a la recuperación de fracturas diafisarias del húmero [Computational study of internal fixation systems applied to recovery of humeral diaphyseal fractures]", Thesis, Universidad De Las Palmas De Gran Canaria, Mexico. [PDF, WWW]	orthopedicsupper extremityFEA
2014	Chen Z, Zhang X, Ardestani MM, Wang L, Liu Y, Lian Q, He J, Li D, Jin Z (2014), "Prediction of in vivo joint mechanics of an artificial knee implant using rigid multi-body dynamics with elastic contacts", Proc. Inst. Mech. Eng. H, vol. 228, pp. 564-575. [DOI]	orthopedicskneevalidation
2014	Coombs DJ, Wykosky S, Bushelow M (2014), "Calcaneal Fixation Plate Test Method Development", In: SIMULIA Community Conference, May 19-24, 2014, Providence, RI. [PDF]	orthopedicsfootmethodsFEA
2014	Cutlip K, Nimbarte AD, Ning X, Jaridi M (2014), "A Biomechanical Strain Index to Evaluate Shoulder Stress", Proceedings of the 2014 Industrial and Systems Engineering Research Conference. [PDF, WWW]	work place ergonomicsshouldermethods
2014	DŚouza SF (2014), "Physical efficiency as a function of age: Development of an age scaling model for biomechanical simulation", Thesis, Technical University of Munich. [PDF]	methods
2014	Fluit R, Andersen MS, Kolk S, Verdonschot N, Koopman HF (2014), "Prediction of ground reaction forces and moments during various activities of daily living", J. Biomech., vol. 47, pp. 2321-2329. [DOI]	gaitmethods
2014	Fluit R, Andersen MS, Verdonschot N, Koopman HF (2014), "Optimal inverse dynamic simulation of human gait", Gait Posture, vol. 39, pp. S42. [PDF, DOI, WWW]	orthopedicsgaitmethods
2014	Gao ZH, Fan D, Wang D, Zhao H, Zhao K, Chen C (2014), "Muscle activity and co-contraction of musculoskeletal model during steering maneuver", Biomed. Mater. Eng., vol. 24, pp. 2697-2706. [DOI]	automotive
2014	Han KS, Yu CH, Kwon TK (2014), "Muscle forces and activation patterns in the spine during spine stabilization exercise using a whole body tilt device", International Journal of Precision Engineering and Manufacturing, vol. 15, pp. 2589-2595.	spinevalidation
2014	Huang N, Yang X, Chen X (2014), "Modification of Muscle Force Prediction Model Based on Muscle Fatigue Analysis", Space Med. Med. Eng.. [WWW]	aerospacemethods
2014	Ignasiak D, Ferguson SJ (2014), "Simulation of Spinal Loading: Importance of Subject-Specific Posture and Motion Patterns", Global Spine Journal, vol. 4, pp. s-0034-1376548-s-0034-1376548. [DOI]	orthopedicsspine
2014	Jung Y, Jung M, Lee K, Koo S (2014), "Ground reaction force estimation using an insole-type pressure mat and joint kinematics during walking", J. Biomech., vol. 47, pp. 2693-2699. [DOI]	footgaitmethods
2014	Li J, Redmond AC, Jin Z, Fisher J, Stone MH, Stewart TD (2014), "Hip contact forces in asymptomatic total hip replacement patients differ from normal healthy individuals: Implications for preclinical testing", Clin. Biomech. , vol. 29, pp. 747-751. [DOI]	orthopedicship
2014	Li L, Ji Z, Xia Y, Gong R (2014), "Application of Inertial Navigation System in Portable Human Body Joint Power Test System", In: 2014 International Conference on Identification, Information and Knowledge in the Internet of Things, pp. 111-116. [DOI, WWW]	upper extremitymethods
2014	Li T, Liu T, Li G, Tao W, Inoue Y, Yi J (2014), "A novel parallel mechanism designed for walking assistance", In: 2014 IEEE International Conference on Robotics and Biomimetics (ROBIO 2014), pp. 980-985. [DOI]	exoskeletonfootgaitrehab
2014	Marek C, Siebertz K (2014), "Ergonomics for Passenger Cars", Book Chapter, In: Encyclopedia of Automotive Engineering, pp. 1-24. [DOI]	automotive
2014	Mirakhorlo M, Azghani MR, Kahrizi S (2014), "Validation of a musculoskeletal model of lifting and its application for biomechanical evaluation of lifting techniques", J. Res. Health Sci., vol. 14, pp. 23-28. [WWW]	work place ergonomicslower extremityvalidation
2014	N.Quirk, Baker M, Epari D (2014), "Force reaction analysis of lower limbs during common netball motions; a musculoskeletal modeling approach", In: Australian Biomedical Engineering Conference 2014, Canberra, Australia, 20 - 22 August 2014. [WWW]	sportsknee
2014	Nakashima M, Mori Y (2014), "Effect of mechanical unbalance induced by pregnancy on the muscle load of the erector spinae during a sit-to-stand motion", Journal of Biomechanical Science and Engineering, vol. 9, pp. 14-00035-14-00035. [DOI]	spine
2014	Olesen CG, de Zee M, Rasmussen J (2014), "Comparison between a Computational Seated Human Model and Experimental Verification Data", Appl. Bionics Biomech., vol. 11, pp. 175-183. [DOI, WWW]	seatingvalidation
2014	Pellikaan P, van der Krogt MM, Carbone V, Fluit R, Vigneron LM, Van Deun J, Verdonschot N, Koopman HF (2014), "Evaluation of a morphing based method to estimate muscle attachment sites of the lower extremity", J. Biomech., vol. 47, pp. 1144-1150. [DOI]	lower extremitymethods
2014	Phillips CW, Forrester AI, Hudson DA, Turnock SR (2014), "Comparison of Kinematic Acquisition Methods for Musculoskeletal Analysis of Underwater Flykick", Procedia Engineering, vol. 72, pp. 56-61. [DOI, WWW]	sportsmethods
2014	Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2014), "Strengths and limitations of a musculoskeletal model for an analysis of simulated meat cutting tasks", Appl. Ergon., vol. 45, pp. 592-600. [DOI]	work place ergonomicsupper extremityshouldervalidation
2014	Rasmussen J, Andersen MS, Al-Munajjed AA, Upmann A (2014), "H-point simulation in musculoskeletal models of seating", 3rd International Digital Human Modeling Symposium (DHM2014), May 20-22, 2014, Tokyo, Japan. [WWW]	automotiveseatingmethods
2014	Rasmussen S, Rasmussen J (2014), "A Computational Investigation Of Minimal Invasive Spine Surgery", In: 15th EFORT Congress 2014. [PDF, WWW]	orthopedicsspine
2014	Sanford BA, Williams JL, Zucker-Levin AR, Mihalko WM (2014), "Hip, Knee, and Ankle Joint Forces in Healthy Weight, Overweight, and Obese Individuals During Walking", Book Chapter, In: Computational Biomechanics for Medicine, pp. 101-111. [DOI, WWW]	lower extremitygait
2014	Schiehlen W (2014), "Human walking dynamics: modeling, identification and control", MATEC Web of Conferences, vol. 16, pp. 05008. [DOI, WWW]	gait
2014	Schwarze M, Hurschler C, Seehaus F, Correa T, Welke B (2014), "Influence of transfemoral amputation length on resulting loads at the osseointegrated prosthesis fixation during walking and falling", Clin. Biomech. , vol. 29, pp. 272-276. [DOI]	lower extremitygaitrehab
2014	Seo JW, Kang DW, Kim JY, Yang ST, Kim DH, Choi JS, Tack GR (2014), "Finite element analysis of the femur during stance phase of gait based on musculoskeletal model simulation", Biomed. Mater. Eng., vol. 24, pp. 2485-2493. [DOI]	lower extremitygaitFEAvalidation
2014	Sins L (2014), "Étude expérimentale et numérique dárthroplasties totales anatomiques de lé́paule [Experimental and numerical study of anatomical total joint replacement of the shoulder]", Thesis, ÉTS - École de Technologie Supérieure, Montréal, Canada. [PDF, WWW]	orthopedicsshoulder
2014	Skals S, Rasmussen K, Bendtsen K, Andersen MS (2014), "Validation of musculoskeletal models driven by dual Microsoft Kinect Sensor data", In: 13th International Symposium on 3D Analysis of Human Movement, Lausanne, Switzerland, pp. 14-17. [PDF, WWW]	upper extremitylower extremitygaitmethods
2014	Stoltze JS (2014), "Development of a workflow for wear and functional simulation of total knee replacements", Thesis, Aalborg University, Denmark. [PDF, WWW]	orthopedicskneeFEA
2014	Weber T, Al-Munajjed AA, Verkerke GJ, Dendorfer S, Renkawitz T (2014), "Influence of minimally invasive total hip replacement on hip reaction forces and their orientations", J. Orthop. Res., vol. 32, pp. 1680-1687. [DOI]	orthopedicship
2014	Wibawa AD (2014), "Lower limb musculoskeletal modeling during normal walking, one-legged forward hopping, side jumping and knee flexion: A Validation study of the AnyBody Modeling System for optimizing anterior cruciate ligament reconstruction", Thesis, University of Groningen, the Netherlands. [WWW]	orthopedicskneevalidation
2014	Witkowski M, Sitnik R, Verdonschot N (2014), "Recent improvements in SPE3D: a VR-based surgery planning environment", In: Dolinsky M, McDowall IE (Ed): The Engineering Reality of Virtual Reality 2014, pp. 90120E. [DOI, WWW]	orthopedicshipmethods
2014	Wu JZ, Sinsel EW, Shroyer JF, Warren CM, Welcome DE, Zhao KD, An KN, Buczek FL (2014), "Analysis of the musculoskeletal loading of the thumb during pipetting--a pilot study", J. Biomech., vol. 47, pp. 392-399. [DOI]	work place ergonomicshandupper extremity
2014	van Drongelen S, Wolf SI, Fradet L (2014), "Muscle load in reaching movements performed by a wheelchair user: a case study", Disabil. Rehabil., vol. 36, pp. 1133-1138. [DOI]	shouldervalidationrehab
2013	Abdullah E, Fareez M, Jamaludin MS, Notomi M, Rasmussen J, Others (2013), "Musculoskeletal Analysis of Driving Fatigue: The Influence of Seat Adjustments", In: Advanced Engineering Forum, pp. 373-378. [PDF, DOI, WWW]	automotiveseating
2013	Andersen MS, Yang J, de Zee M, Zhou L, Bai S, Rasmussen J (2013), "Full-body musculoskeletal modeling using dual Microsoft Kinect sensors and the Anybody Modeling System", TGCS 2013 Symposium, August 2013 Natal, Brazil. [WWW]	methods
2013	Buchner E (2013), "Analyse der Ergonomie beim Einstieg in ein Fahrzeug - teil 2 [Analysis of ergonomics when entering a vehicle - part 2]", Thesis, Fachhochschule Technikum Wien, Austria.	automotive
2013	Cadova M (2013), "Use of OpenSim and AnyBody modelling software for dynamic simulation of the human masticatory system", 18th International Symposium on Computational Biomechanics in Ulm CBU 2013. [PDF]	mandible
2013	Cao E, Inoue Y, Liu T, Shibata K (2013), "An Inverse Dynamic Approach for Quantitative Muscle Force Estimation during Human Standing-Up Process", Journal of Biomechanical Science and Engineering, vol. 8, pp. 63-78. [DOI]	lower extremityvalidationrehab
2013	Carbone V, Van der Krogt MM, Koopman BF, Verdonschot N (2013), "Subject-specific musculo-tendon parameters based on MRI and dynamometer tests", Gait Posture, vol. 38, pp. S4. [PDF, DOI, WWW]	lower extremitykneemethodsvalidation
2013	Cassidy K, Hangalur G, Sabharwal P, Chandrashekar N (2013), "Combined in vivo/in vitro method to study anteriomedial bundle strain in the anterior cruciate ligament using a dynamic knee simulator", J. Biomech. Eng., vol. 135, pp. 35001. [DOI]	kneevalidation
2013	Chen S, Andersen MS, Rasmussen J, Tang W (2013), "The effect of muscle setting on kinetics of upper extremity in a baseball pitching modeling: A case study", In: ISBS-Conference Proceedings Archive. [WWW]	sportsupper extremity
2013	Cronskar M, Backstrom M (2013), "Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input", Modelling in Medicine and Biology X, vol. 17, pp. 235. [WWW]	orthopedicsupper extremityFEA
2013	Doran ER (2013), "Effects of combining of upper and lower body resistance training on lumbar loading", Thesis, Oregon State University. [PDF, WWW]	orthopedicsspine
2013	Essers JM, Meijer K, Murgia A, Bergsma A, Verstegen P (2013), "An inverse dynamic analysis on the influence of upper limb gravity compensation during reaching", IEEE Int. Conf. Rehabil. Robot., vol. 2013, pp. 6650368. [DOI]	exoskeletonupper extremityrehab
2013	Galloway F, Kahnt M, Ramm H, Worsley P, Zachow S, Nair P, Taylor M (2013), "A large scale finite element study of a cementless osseointegrated tibial tray", J. Biomech., vol. 46, pp. 1900-1906. [DOI]	orthopedicskneeFEA
2013	Guenzkofer F, Bubb H, Bengler K (2013), "The validity of maximum force predictions based on single-joint torque measurements", The 2nd International Digital Human Modeling Symposium, Ann Arbor June 11-13, 2013. [PDF, WWW]	upper extremitymethods
2013	Haberly GJ (2013), "Hip Loading During the Squat Exercise", Thesis, Oregon State University.	orthopedicship
2013	Hajihoseinali M, Nickpour H, Arjmand N, Farahmand F (2013), "Effect of considering stability requirements on antagonistic muscle activities using a musculoskeletal model of the human lumbar spine", In: 2013 20th Iranian Conference on Biomedical Engineering (ICBME), pp. 260-264. [DOI]	spineFEA
2013	Han KS, Kim K, Park WM, Lim DS, Kim YH (2013), "Effect of centers of rotation on spinal loads and muscle forces in total disk replacement of lumbar spine", Proc. Inst. Mech. Eng. H, vol. 227, pp. 543-550. [DOI]	orthopedicsspine
2013	Han KS, Kim YH, Kim K (2013), "Alteration of ligament stiffness can change the spine muscle coordination in flexed positions", 2013 ORS Annual Meeting, San Antonio, TX. [PDF, WWW]	spine
2013	Han KS, Rohlmann A, Zander T, Taylor WR (2013), "Lumbar spinal loads vary with body height and weight", Med. Eng. Phys., vol. 35, pp. 969-977. [DOI]	orthopedicsspine
2013	Hess S (2013), "Modelling and analysis of an impulse stimulated human body by a hand-guided power tool", Thesis, Karlsruhe Institute of Technology. [PDF, WWW]	work place ergonomicsupper extremity
2013	Holmberg LJ, Lund Ohlsson M, Supej M, Holmberg HC (2013), "Skiing efficiency versus performance in double-poling ergometry", Comput. Methods Biomech. Biomed. Engin., vol. 16, pp. 987-992. [DOI]	sports
2013	Jackson M, Sylvestre É, Bleau J, Allard P, Begon M (2013), "Estimating optimal shoulder immobilization postures following surgical repair of massive rotator cuff tears", J. Biomech., vol. 46, pp. 179-182. [DOI]	orthopedicsshoulderrehab
2013	Jun SK, Zhou X, Ramsey DK, Krovi VN (2013), "Kinetostatic Design-Refinement of Articulated Knee Braces", In: Proceedings of the ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013 August 4-7, 2013, Portland, OR. [PDF]	exoskeletonkneemethodsrehab
2013	Jun SK, Zhou X, Ramsey DK, Krovi VN (2013), "A Comparative Study of Human Motion Capture and Analysis Tools", The 2nd International Digital Human Modeling Symposium, Ann Arbor, MI. [PDF, WWW]	lower extremitymethods
2013	Jung M, Damsgaard M, Andersen MS, Rasmussen J (2013), "Integrating Biomechanical Manikins into a CAD Environment", 2nd International Digital Human Modeling Symposium, Michigan Ann Arbor. [PDF]	methods
2013	Jung Y, Jung M, Lee K, Koo S (2013), "Estimating Knee Adduction Moment From Joint Kinematics Using Musculoskeletal Simulation With Conditional Reaction Elements", ORS 2013 Annual Meeting, San Antonio, TX. [PDF]	kneevalidation
2013	Koblauch H, Bern SH, Brauer C, Mikkelsen S, de Zee M, Thygesen LC, Helweg-Larsen K, Alkjær T, Andersen MS, Simonsen EB (2013), "Lumbar Load in Common Work Tasks for Airport Baggage Handlers – A 3D Dynamic Analysis", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW]	work place ergonomicsspine
2013	Kulcsar RM, Borozan IS, Argesanu V, Madaras L (2013), "Car Seats Ergonomic Evaluation", Int. J. Eng.. [WWW]	automotivespinelower extremityseatingvalidation
2013	Lemieux PO (2013), "Analyse numérique des paramètres biomécaniques influencant la fonction de l’épaule atteinte d’arthropathie de rupture de coiffe [Numerical analysis of biomechanical parameters that Influence shoulder function in case of cuff tear arthropathy]", Ph.D. Thesis, L’école de technologie supérieure, Montréal, Canada. [PDF]	orthopedicsshoulder
2013	Lemieux PO, Hagemeister N, Tétreault P, Nuño N (2013), "Influence of the medial offset of the proximal humerus on the glenohumeral destabilising forces during arm elevation: a numerical sensitivity study", Comput. Methods Biomech. Biomed. Engin., vol. 16, pp. 103-111. [DOI]	orthopedicsshouldersensitivity analysis
2013	Lemieux PO, Tétreault P, Hagemeister N, Nuño N (2013), "Influence of prosthetic humeral head size and medial offset on the mechanics of the shoulder with cuff tear arthropathy: a numerical study", J. Biomech., vol. 46, pp. 806-812. [DOI]	orthopedicsshoulder
2013	Lenar J, Witkowski M, Carbone V, Kolk S, Adamczyk M, Sitnik R, van der Krogt M, Verdonschot N (2013), "Lower body kinematics evaluation based on a multidirectional four-dimensional structured light measurement", J. Biomed. Opt., vol. 18, pp. 56014. [DOI]	lower extremitygaitmethods
2013	Mellon SJ, Grammatopoulos G, Andersen MS, Pegg EC, Pandit HG, Murray DW, Gill HS (2013), "Individual motion patterns during gait and sit-to-stand contribute to edge-loading risk in metal-on-metal hip resurfacing", Proc. Inst. Mech. Eng. H, vol. 227, pp. 799-810. [DOI]	orthopedicshipgait
2013	Nakashima M, Hasegawa T, Kamiya S, Takagi H (2013), "Musculoskeletal Simulation of the Breaststroke", Journal of Biomechanical Science and Engineering, pp. 13-136. [DOI, WWW]	sportsupper extremitylower extremityvalidation
2013	Nakashima M, Hasegawa T, Matsuda A, Shimana T, Omori K (2013), "3D-CG Based Musculoskeletal Simulation for a Swimmer Wearing Competitive Swimwear", Procedia Engineering, vol. 60, pp. 367-372. [DOI, WWW]	sportsvalidation
2013	Nimbarte AD, Sivak-Callcott JA, Zreiqat M, Chapman M (2013), "Neck Postures and Cervical Spine Loading Among Microsurgeons Operating with Loupes and Headlamp", IIE Transactions on Occupational Ergonomics and Human Factors, vol. 1, pp. 215-223. [DOI]	orthopedicswork place ergonomicsspine
2013	Nimbarte AD, Sun Y, Jaridi M, Hsiao H (2013), "Biomechanical loading of the shoulder complex and lumbosacral joints during dynamic cart pushing task", Appl. Ergon., vol. 44, pp. 841-849. [DOI]	work place ergonomicsshoulderspinevalidation
2013	Nolte D, Andersen MS, Rasmussen J, Al-Munajjed A (2013), "Development of a patient-specific musculoskeletal model of a healthy knee to analyze hard and soft tissue loading", In: 21st Annual Symposium on Computational Methods in Orthopaedic Biomechanics. [PDF]	knee
2013	Oliveira AS, Silva PB, Lund ME, Gizzi L, Farina D, Kersting UG (2013), "Effects of perturbations to balance on neuromechanics of fast changes in direction during locomotion", PLoS One, vol. 8, pp. e59029. [DOI]	rehab
2013	Oliveira AS, Silva PB, Lund ME, Kersting UG, Farina D (2013), "Fast changes in direction during human locomotion are executed by impulsive activation of motor modules", Neuroscience, vol. 228, pp. 283-293. [DOI]	lower extremity
2013	Petrella A, Rasmussen J, Al Munajjed A, Damsgaard M, Lund M, Kiis A (2013), "How Good is Good Enough? Lessons in Musculoskeletal Model Validation With the Anybody Modeling System", In: ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, pp. V001T04A002-V001T04A002. [DOI, WWW]	validation
2013	Sanford BA, Williams JL, Zucker-Levin AR, Mihalko WM (2013), "Tibiofemoral Joint Forces during the Stance Phase of Gait after ACL Reconstruction", OJBIPHY, vol. 03, pp. 277-284. [DOI, WWW]	orthopedicskneegaitrehab
2013	Schwarze M, Hurschler C, Seehaus F, Oehler S, Welke B (2013), "Loads on the prosthesis-socket interface of above-knee amputees during normal gait: validation of a multi-body simulation", J. Biomech., vol. 46, pp. 1201-1206. [DOI]	lower extremitygaitvalidationrehab
2013	Song WK, Ko BW, Lee J (2013), "Dynamics analysis of upper-extremity motions of stroke survivors during reaching tasks at different levels", In: 2013 IEEE RO-MAN, pp. 13-18. [DOI]	upper extremityrehab
2013	Ulrey BL, Fathallah FA (2013), "Subject-specific, whole-body models of the stooped posture with a personal weight transfer device", J. Electromyogr. Kinesiol., vol. 23, pp. 206-215. [DOI]	exoskeletonwork place ergonomicsspinelower extremityvalidation
2013	Vanheule V, Andersen MS, Wirix-Speetjens R, Jonkers I, Victor J, Sloten JV (2013), "Modeling of Patient-Specific Knee Kinematics and Ligament Behavior Using Force-Dependent Kinematics", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW]	knee
2013	Wagner DW, Stepanyan V, Shippen JM, Demers MS, Gibbons RS, Andrews BJ, Creasey GH, Beaupre GS (2013), "Consistency among musculoskeletal models: caveat utilitor", Ann. Biomed. Eng., vol. 41, pp. 1787-1799. [DOI]	methods
2013	Welke B, Schwarze M, Hurschler C, Calliess T, Seehaus F (2013), "Multi-body simulation of various falling scenarios for determining resulting loads at the prosthesis interface of transfemoral amputees with osseointegrated fixation", J. Orthop. Res., vol. 31, pp. 1123-1129. [DOI]	lower extremityrehab
2013	Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ (2013), "Lower Limb Musculoskeletal Model Validation during One Legged Forward Hopping and Side Jumping in Healthy Subjects Using EMG", In: HCI International 2013 - Posters’ Extended Abstracts, pp. 557-560. [DOI, WWW]	lower extremityvalidation
2013	Worsley P, Stokes M, Barrett D, Taylor M (2013), "Joint loading asymmetries in knee replacement patients observed both pre- and six months post-operation", Clin. Biomech. , vol. 28, pp. 892-897. [DOI]	orthopedicsknee
2013	Wu JZ, Sinsel EW, Shroyer JF, Welcome DE, Zhao KD, An KN, Buczek FL (2013), "The musculoskeletal loading profile of the thumb during pipetting based on tendon displacement", Med. Eng. Phys., vol. 35, pp. 1801-1810. [DOI]	work place ergonomicshandupper extremity
2013	Wyss C, Brunner R (2013), "Determination of reaction forces and moments in the foot joints using multibody dynamics and Fe analysis—A clinical application", Gait Posture, vol. 38, pp. S108-S109. [PDF, DOI, WWW]	footgaitFEA
2013	Yang M, Xu Z, Liu Y, He Y, Xu Y (2013), "Perceiving and predicting the intended motion with human-machine interaction force for walking assistive exoskeleton robot", In: 2013 IEEE International Conference on Mechatronics and Automation, pp. 805-810. [DOI]	exoskeletonlower extremityrehab
2013	Yang Z, Zheng Y, Fu S (2013), "Simulation of Pushing the Push-Pull Rod Action Based on Human Body Dynamics", In: Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, pp. 393-401. [DOI, WWW]	aerospacework place ergonomicsupper extremity
2013	Zhang J, Zhou R, Li J, Ding L, Wang L (2013), "Optimization for Lunar Mission Training Scheme Based on AnyBody Software", In: Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, pp. 169-178. [DOI, WWW]	aerospaceupper extremityvalidation
2013	Zhou L, Bai S, Andersen MS, Rasmussen J (2013), "Design and optimization of a spring-loaded cable-driven robotic exoskeleton", Proceedings of the 25th Nordic Seminar on Computational Mechanics, pp. 205-208. [PDF]	exoskeletonshoulderrehab
2013	Zhu R, Zander T, Dreischarf M, Duda GN, Rohlmann A, Schmidt H (2013), "Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses", J. Biomech., vol. 46, pp. 1376-1378. [DOI]	spineFEA
2012	Ahmed S, Babski-Reeves K (2012), "Assessment of Upper Extremity Postures in Novice and Expert during Simulated Carpentry Tasks", Human Factors and Ergonomics Society 56th Annual Meeting.	work place ergonomicsupper extremity
2012	Alkjaer T, Wieland MR, Andersen MS, Simonsen EB, Rasmussen J (2012), "Computational modeling of a forward lunge: towards a better understanding of the function of the cruciate ligaments", J. Anat., vol. 221, pp. 590-597. [DOI]	knee
2012	Andersen MS, Damsgaard M, Rasmussen J, Ramsey DK, Benoit DL (2012), "A linear soft tissue artefact model for human movement analysis: proof of concept using in vivo data", Gait Posture, vol. 35, pp. 606-611. [DOI]	gaitmethods
2012	Andersen MS, Mellon S, Lund ME, Grammatopoulos G, Gill HS (2012), "The effect of including accurate pelvis bony landmarks in a nonlinearly scaled musculoskeletal lower extremity model", International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy. [PDF]	orthopedicshipgaitmethods
2012	Andersen MS, Rasmussen J, Damsgaard M (2012), "Letter to the Editor", J. Theor. Biol., vol. 298 , pp. 154-155.	methods
2012	Böhme J, Shim V, Höch A, Mütze M, Müller C, Josten C (2012), "Clinical implementation of finite element models in pelvic ring surgery for prediction of implant behavior: a case report", Clin. Biomech. , vol. 27, pp. 872-878. [DOI]	orthopedicshipFEA
2012	Cao E, Inoue Y, Liu T, Shibata K (2012), "Estimation of lower limb muscle forces during human sit-to-stand process with a rehabilitation training system", In: Proceedings of 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics, pp. 1016-1019. [DOI]	lower extremityvalidationrehab
2012	Cao E, Inoue Y, Liu T, Shibata K (2012), "Muscle Force Analysis of Human Foot Based on Wearable Sensors and EMG Method", Book Chapter, In: EMG Methods for Evaluating Muscle and Nerve Function. [WWW]	footgaitvalidation
2012	Carbone V, van der Krogt MM, Koopman HF, Verdonschot N (2012), "Sensitivity of subject-specific models to errors in musculo-skeletal geometry", J. Biomech., vol. 45, pp. 2476-2480. [DOI]	lower extremity
2012	Cho K, Kim Y, Yi D, Jung M, Lee K (2012), "Analysis and evaluation of a combined human - exoskeleton model under two different constraints condition", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF]	exoskeletonrehab
2012	D’Souza S, Rasmussen J, Schwirtz A (2012), "Multiple linear regression to develop strength scaled equations for knee and elbow joints based on age, gender and segment mass", International Journal of Human Factors Modelling and Simulation, vol. 3, pp. 32-47. [WWW]	methods
2012	Engstler F (2012), "Perzentilierung maximaler Gelenkmomente des Menschen [Maximum joint moment percentiles for man]", Thesis, Technischen Universität München. [PDF, WWW]	methods
2012	Eschweiler J, Fieten L, Dell'Anna J, Kabir K, Gravius S, Tingart M, Radermacher K (2012), "Application and evaluation of biomechanical models and scores for the planning of total hip arthroplasty", Proc. Inst. Mech. Eng. H, vol. 226, pp. 955-967. [DOI]	orthopedicshipvalidation
2012	Fluit R, van der Krogt MM, van der Kooij H, Verdonschot N, Koopman HF (2012), "A simple controller for the prediction of three-dimensional gait", J. Biomech., vol. 45, pp. 2610-2617. [DOI]	orthopedicsgait
2012	Galloway F, Worsley P, Stokes M, Nair P, Taylor M (2012), "Development of a statistical model of knee kinetics for applications in pre-clinical testing", J. Biomech., vol. 45, pp. 191-195. [DOI]	kneegaitmethods
2012	Grammatopoulos G, Mellon S, Andersen MS, Pandit H, Gundle R, McLardy-Smith P, Murray D, Gill H (2012), "Why dont́ all malpositioned resurfaced cups have high wear? - A dynamic, gait lab study", In: Journal of Bone and Joint Surgery. British Volume. Orthopaedic Proceedings.	orthopedicshipgait
2012	Han KS, Rohlmann A, Kim K, Cho KW, Kim YH (2012), "Effect of ligament stiffness on spinal loads and muscle forces in flexed positions", Int. J. Precis. Eng. Manuf., vol. 13, pp. 2233-2238. [DOI, WWW]	spine
2012	Han KS, Zander T, Taylor WR, Rohlmann A (2012), "An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces", Med. Eng. Phys., vol. 34, pp. 709-716. [DOI]	spinevalidation
2012	Holmberg JL (2012), "Musculoskeletal Biomechanics in Cross-country Skiing", Thesis, Linköping University, Sweden. [WWW]	sportsmethods
2012	Holmberg LJ, Ohlsson ML, Danvind J (2012), "Musculoskeletal simulations: a complementary tool for classification of athletes with physical impairments", Prosthet. Orthot. Int., vol. 36, pp. 396-397. [DOI]	sportsmethods
2012	Joakim Holmberg L, Klarbring A (2012), "Muscle decomposition and recruitment criteria influence muscle force estimates", Multibody Syst. Dyn., vol. 28, pp. 283-289. [DOI, WWW]	methods
2012	Jung Y, Jung M, Lee K, Koo S (2012), "Ground Reaction Force Estimation Using Musculoskeletal Simulation", 30th Conference of the International Society of Biomechanics in Sport, ISBS2012, Melbourne, Australia. [PDF]	footgaitmethodsvalidation
2012	Kersting UG (2012), "Implications of subtalar joint motion for muscle and joint loading during running", In: Journal of Foot and Ankle Research.	sportsanklefoot
2012	Kim T, Lee K, Kwon J (2012), "Design improvement of the smith machine using simulation on musculoskeletal model", International Journal of CAD/CAM, vol. 12. [WWW]	sportslower extremityvalidation
2012	Koning BH, der Krogt MM, Baten CT, Koopman HF (2012), "Kinematics of a musculoskeletal model using inertial and magnetic measurement units", 12th International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy, 18th to 20th July 2012. [PDF, WWW]	lower extremitymethods
2012	Kulcsar RM, Madaras L, Maniu I, Borozan IS, Argesanu V (2012), "Ergonomic Study Regarding the Effects of the Inertia and Centrifugal Forces on the Driver", Ammonia Plant Saf. Relat. Facil, vol. 162, pp. 84-91. [DOI, WWW]	automotive
2012	Kunze M, Schaller A, Steinke H, Scholz R, Voigt C (2012), "Combined multi-body and finite element investigation of the effect of the seat height on acetabular implant stability during the activity of getting up", Comput. Methods Programs Biomed., vol. 105, pp. 175-182. [DOI]	orthopedicshipseatingFEA
2012	Kunze M, Voigt C, Strauss G, Scholz R, Fischer M (2012), "Comparison of multi-body simulations and EMG measurements on the M. deltoideus acromialis", Cameroon J. Agric. Sci., vol. 1 . [WWW]	shouldervalidation
2012	Lemieux PO, Nuño N, Hagemeister N, Tétreault P (2012), "Mechanical analysis of cuff tear arthropathy during multiplanar elevation with the AnyBody shoulder model", Clin. Biomech. , vol. 27, pp. 801-806. [DOI]	shoulder
2012	Lund ME, de Zee M, Andersen MS, Rasmussen J (2012), "On validation of multibody musculoskeletal models", Proc. Inst. Mech. Eng. H, vol. 226, pp. 82-94. [DOI]	methodsvalidation
2012	Mellon S, Andersen MS, Grammatopoulos G, Gill H (2012), "Mal-positioning alone does not necessarily lead to increased wear in metal-on-metal hip resurfacing", Proceedings of the ORS 2012 annual meeting. [PDF]	orthopedicshipgait
2012	Nakashima M, Maeda S, Miwa T, Ichikawa H (2012), "Optimizing Simulation of the Arm Stroke in Crawl Swimming Considering Muscle Strength Characteristics of Athlete Swimmers", Journal of Biomechanical Science and Engineering, vol. 7, pp. 102-117. [DOI]	sports
2012	Olesen CG (2012), "The Influence of Sitting Conditions on Soft Tissue Loads", Thesis, Aalborg University, Denmark. [PDF]	seatingmethodsvalidationrehab
2012	Oomen PW, Drost MR, van Rhijn LW, Meijer K (2012), "Is Strength Scaling Sufficient for the Development of Personalized Multi Body Models?", 20th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, February 3, 2012 University of California Berkeley, Berkeley, California. [PDF]	methods
2012	Rackl M (2012), "Patient-Specific Modelling of Fractures of the Lower Jaw with FEA and Musculoskeletal Simulation", Thesis, Fachhochschule Regensburg, Germany. [PDF]	orthopedicsmandibleFEA
2012	Rashedi E, Jia B, Nussbaum MA, Lockhart TE (2012), "Investigating the effects of slipping on lumbar muscle activity, kinematics, and kinetics", Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 56, pp. 1201-1205. [DOI]	work place ergonomicsspinegait
2012	Rasmussen J, Boocock M, Paul G (2012), "Advanced musculoskeletal simulation as an ergonomic design method", A Journal of Prevention, Assessment and Rehabilitation, vol. 41 , pp. 6107-6111. [DOI]	work place ergonomics
2012	Rasmussen J, Holmberg J, Sørensen K, Kwan MM, Andersen MS, de Zee M, Holmberg LJ, Sørensen K, Kwan MM, Andersen MS, de Zee M (2012), "Performance optimization by musculoskeletal simulation", Movement & Sport Sciences, Science & Motricite, vol. 1, pp. 73-83. [DOI]	sports
2012	Ribeiro A, Rasmussen J, Flores P, Silva LF (2012), "Modeling of the condyle elements within a biomechanical knee model", Multibody Syst. Dyn., vol. 28, pp. 181-197. [DOI, WWW]	knee
2012	Sheen DP, Lee D, Lee S, Sohn R, Ko BW, Song WK, Lee K (2012), "An Upper Limb Motion Analysis of Stroke Patients in Daily Activities Using a Musculoskeletal Model", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF]	upper extremityvalidationrehab
2012	Voigt C, Kunze M, Fischer M, Strauss G, Steinke H, Klöhn C, Scholz R (2012), "Combined Multi-Body and Finite Element Simulation (AnyBody/ANSYS) – Examples of Application and Validation in Biomechanics", In: ANSYS Conference & 30th.CADFEM Users’ Meeting. [PDF]	orthopedicsshoulderhipFEAvalidation
2012	Voinescu M, Soares DP, Natal Jorge RM, Davidescu A, Machado LJ (2012), "Estimation of the forces generated by the thigh muscles for transtibial amputee gait", J. Biomech., vol. 45, pp. 972-977. [DOI]	lower extremitygaitvalidationrehab
2012	Weber T, Dendorfer S, Dullien S, Grifka J, Verkerke GJ, Renkawitz T (2012), "Measuring functional outcome after total hip replacement with subject-specific hip joint loading", Proc. Inst. Mech. Eng. H, vol. 226, pp. 939-946. [DOI]	orthopedicship
2012	Weber T, Stezowski P, Dullien S, Dendorfer S (2012), "Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hueft-Totalendoprothese [A biomechanical evaluation of different load scenarios after implantation of a total hip replacement]", 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V. 25. - 27. Juli 2012, Regensburg, Germany. [PDF]	orthopedicshipmethodsFEA
2012	Witkowski M, Lenar J, Sitnik R, Verdonschot N (2012), "A virtual reality interface for pre-planning of surgical operations based on a customized model of the patient", In: Proc. SPIE. [WWW]	orthopedicshiplower extremity
2012	Wu JZ, Sinsel EW, Gloekler DS, Wimer BM, Zhao KD, An KN, Buczek FL (2012), "Inverse dynamic analysis of the biomechanics of the thumb while pipetting: a case study", Med. Eng. Phys., vol. 34, pp. 693-701. [DOI]	work place ergonomicshandmethods
2012	Xiao-hong JI, Jun-bing MA, Ren-cheng WA, Fang PU, Fang SU (2012), "Effect of helmet mass and mass center on neck muscle strength in military pilots", Journal of Medical Biomechanics. [WWW]	aerospacedefensework place ergonomicsspine
2012	Zhou L, Bai S, Rasmussen J (2012), "Biomechanical modeling of an assistive shoulder orthoses", AAL Forum 2012, 24-27 Sep 2012, Eindhoven, The Netherlands. [PDF]	exoskeletonshoulderrehab
2012	Zhu C, Jin J, Sun Y, Zheng A (2012), "Simulation of Constant Resistance Knee Flexion Movement", Book Chapter, In: System Simulation and Scientific Computing, pp. 432-439. [DOI, WWW]	sportsknee
2012	van der Ploeg B, Tarala M, Homminga J, Janssen D, Buma P, Verdonschot N (2012), "Toward a more realistic prediction of peri-prosthetic micromotions", J. Orthop. Res., vol. 30, pp. 1147-1154. [DOI]	orthopedicshiplower extremitygaitFEA
2011	Andersen MS, Damsgaard M, Rasmussen J (2011), "Force-dependent kinematics: a new analysis method for non-conforming joints", In: Presented at the 13th Biennial International Symposium on Computer Simulation in Biomechanics, pp. 2-2 pp.. [PDF]	methods
2011	Andersen MS, Rasmussen J (2011), "Total knee replacement musculoskeletal model using a novel simulation method for non-conforming joints", Proceedings of the International Society of Biomechanics Conference. [PDF]	kneegaitmethods
2011	Asfour S, Eltoukhy M (2011), "Development and Validation of a Three-Dimensional Biomechanical Model of the Lower Extremity", Book Chapter, In: Klika V (Ed): Theoretical Biomechanics, pp. 161-186. [PDF, DOI, WWW]	lower extremityvalidation
2011	Bai S, Rasmussen J (2011), "Modelling of Physical Human-Robot Interaction for Exoskeleton Designs", In: ECCOMAS Thematic Conference: Multibody Dynamics 2011, Brussels, Belgium, pp. 6-6 pp.. [PDF]	exoskeletonupper extremityrehab
2011	Bajelan S, Azghani MR (2011), "Musculoskeletal analysis of sit-to-stand maneuver in order to compare the various standing up strategies", In: 2011 18th Iranian Conference of Biomedical Engineering (ICBME), pp. 215-220. [DOI]	hipkneerehab
2011	Cao E, Inoue Y, Liu T, Shibata K (2011), "Estimate Muscle Forces of Ankle Joint with Wearable Sensors", Journal of Biomechanical Science and Engineering, vol. 6, pp. 299-310. [DOI]	footvalidation
2011	Cao X, Dong Z (2011), "Human measurement technology based on small sample and its application in human factors engineering", In: 2011 IEEE 18th International Conference on Industrial Engineering and Engineering Management, pp. 589-591. [DOI, WWW]	methods
2011	Farahani SD, de Zee M, Andersen MS, Lund ME, Rasmussen J (2011), "Prediction of the Movement Patterns for Human Squat Jumping using the Inverse-Inverse Dynamics Technique", XIII International Symposium on Computer Simulation in Biomechanics. [PDF, WWW]	lower extremitymethods
2011	Gadomski BC, Rasmussen J, Galibarov P, Puttlitz CM (2011), "The effect of coupled motions and lifting tasks on human lumbar nucleus pressures and annulus fibrosis stresses in a muscle-loaded finite element model", International Society for Biomechanics. [PDF]	work place ergonomicsspineFEA
2011	Gadomski BC, Rasmussen J, Puttlitz CM (2011), "Implementation of Physiological Muscle Loading in a Finite Element Model of the Human Lumbar Spine", Transactions of the 57th annual meeting of the Orthopaedic Reasearch Society. [PDF]	spineFEAvalidation
2011	Gadomski BC, Rasmussen J, Puttlitz CM (2011), "The effect of muscle loading on internal mechanical parameters of the lumbar spine: a finite element study", In: Proceedings of 2011 ASME Summer Bioengineering Conference, pp. 2-2 pp.. [PDF, WWW]	spineFEA
2011	Galibarov PE, Al-Munajjed AA, Dendorfer S, Christensen ST, Rasmussen J (2011), "The effect of varying the stiffness of spinal fusion devices on the adjacent levels using multibody dynamics simulation", In: ISTA, 24th annual congress, pp. 2-2 pp..	orthopedicsspine
2011	Galibarov PE, Dendorfer S, Christensen ST (2011), "On modelling spine curvature dependent on muscular and external forces in multibody dynamics system", In: Presented at the International Society of Biomechanics 13th congress, 2011, Brussels, Belgium, pp. 2-2 pp.. [PDF]	spinemethods
2011	Galibarov PE, Dendorfer S, Rasmussen J (2011), "Two Computational Models of the Lumbar Spine: Comparison and Validation", Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA, vol. Marie Curi. [PDF]	spinevalidation
2011	Grujicic A, LaBerge M, Xie X, Arakere G, Pandurangan B, Grujicic M, Jeray KJ, Tanner SL (2011), "Computational investigation of the relative efficacies of nail- and plate-type proximal femoral-fracture fixation implants", Multidiscipline Modeling in Materials and Structures, vol. 7, pp. 212-244. [WWW]	orthopedicslower extremitymethodsFEA
2011	Heinen F, Nedergaard NJ, Sloth S, Kersting U (2011), "The effect of medially and laterally wedged insoles on lateral ankle stability during sidestepping movements", Footwear Sci., vol. 3, pp. S73-S74. [DOI]	anklefoot
2011	Heiner F, Nedergaard NJ, Sloth S (2011), "Effect of Crank-Axle Height and Crank Arm Length on Grinding Performance - A Computational Model Approach", .	sportsvalidation
2011	Hopkins AR, Emmenegger D, Stroud L, Schärer C, Lovern B, Holt C, Seebeck J (2011), "Generation of subject specific shoulder kinematic models from motion capture data and AnyBody simulation", In: Presented at the International Soc. Biomechanics conference, 2011 Brussels. [PDF]	shoulder
2011	Jia B, Kim S, Nussbaum MA (2011), "An EMG-based model to estimate lumbar muscle forces and spinal loads during complex, high-effort tasks: Development and application to residential construction using prefabricated walls", Int. J. Ind. Ergon., vol. 41, pp. 437-446. [DOI, WWW]	work place ergonomicsspinevalidation
2011	Jiang X (2011), "Biomechanical analysis of asymmetric and dynamic lifting task", Thesis, New Jersey Institute of Technology, NJ,United States. [WWW]	work place ergonomics
2011	Juliussen RB (2011), "Udvikling af computermodel til analyse af roning [Development of computer model for analysis of rowing]", Thesis, Technical University of Denmark. [PDF]	sportsvalidation
2011	Jung M, Kim Y, Cho K, Lee K (2011), "A novel method to predict posture of human model when designing resistance training machines using musculoskeletal analysis", In: Presented at the American Society of Biomechanics Meeting, Gainesville, FL, pp. 2-2 pp.. [PDF]	sportsmethods
2011	Kaalund S, Faunø P, Olsen SS, Olesen CG (2011), "Pain Reduction by Using Insoles when Playing Soccer on Artificial Turf", .
2011	Kulcsar RM, Argesanu V, Borozan IS, Maniu I (2011), "The human body behavior under vehicle vibrations", In: Proceedings of the 13th WSEAS international conference on Automatic control, modelling & simulation, pp. 368-373. [WWW]	automotiveseating
2011	Kwan MM, Andersen MS, Cheng CL, Tang WT, Rasmussen J (2011), "Investigation of high-speed badminton racket kinematics by motion capture", Sports Eng., vol. 13, pp. 57-63.	sports
2011	Kwan MM, Rasmussen J (2011), "Linking Badminton Racket Design and Performance through Motion Capture", CAME - Computer Aided Medical Engineering, vol. 1 , pp. 13-19. [PDF]	sports
2011	Lund ME, Andersen MS, de Zee M, Rasmussen J (2011), "Functional Scaling of Musculoskeletal Models", In: Presented at the XXIIIrd Congress of the International Society of Biomechanics, ISB 2011, 3-7 July 2011, Brussels, Belgium, pp. 2-2 pp.. [PDF]	methodsvalidation
2011	Lund ME, de Zee M, Rasmussen J (2011), "Comparing calculated and measured curves in validation of musculoskeletal models", In: XIII International Symposium on Computer Simulation in Biomechanics, Leuven, Belgium, pp. 2-2 pp.. [PDF]	methodsvalidation
2011	Madeleine P, Samani A, De M, Kersting U (2011), "Biomechanical Assessments in Sports and Ergonomics", Book Chapter, In: Klika V (Ed): Theoretical Biomechanics, pp. 335-360. [PDF, DOI, WWW]	work place ergonomicssportsmethods
2011	Madeleine P, Samani A, de Zee M, Kersting UG (2011), "Biomechanics of human movement", International Federation for Medical and Biological Engineering Proceedings, vol. 34 , pp. 237-240.	sports
2011	Moghadamab MN, Aminianb K, Asgharia M, Parnianpour M (2011), "How well do the muscular synergies extracted via non-negative matrix factorisation explain the variation of torque at shoulder joint?", Comput. Methods Biomech. Biomed. Engin., pp. 1-11. [DOI, WWW]	shouldermethods
2011	Olesen CG, Lund ME, Sloth S, Heinen F, Nedergaard NJ, de Zee M (2011), "Development of a musculoskeletal model for coffee-grinder design purposes", In: Pedersen KT, Søgaard K (Ed): 3. årsmøde i Dansk Biomekanisk Selskab, pp. 1-1 p.. [PDF]	sportsvalidation
2011	Oosterwaal M, Telfer S, Tørholm S, Carbes S, van Rhijn LW, Macduff R, Meijer K, Woodburn J (2011), "Generation of subject-specific, dynamic, multisegment ankle and foot models to improve orthotic design: a feasibility study", BMC Musculoskelet. Disord., vol. 12, pp. 256. [DOI]	anklefoot
2011	Paul G, Lee WC (2011), "Interfacing Jack and anybody : towards anthropometric musculoskeletal digital human modeling", , pp. 8-8 pp.. [WWW]	methods
2011	Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2011), "Trend validation of a musculoskeletal model with a workstation design parameter", XIII International Symposium on Computer Simulation in Biomechanics. [PDF]	upper extremityvalidation
2011	Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P (2011), "Meat Cutting Tasks Analysis Using 3D Instrumented Knife and Motion Capture", Book Chapter, In: 15th Nordic-Baltic Conference on Biomedical Engineering and Medical Physics (NBC 2011), pp. 144-147. [DOI, WWW]	work place ergonomicsupper extremityspinevalidation
2011	Prajapati K, Barez F, Kao J, Wagner D (2011), "Dynamic Force Response of Human Legs due to Vertical Jumps", In: ASME 2011 International Mechanical Engineering Congress and Exposition, pp. 1-8. [DOI, WWW]	lower extremity
2011	Rasmussen J (2011), "Challenges in human body mechanics simulation", Procedia IUTAM, vol. 2, pp. 176-185. [DOI, WWW]	methods
2011	Rasmussen J, Bichler R, Tørholm S, Renkawitz T, Wirix-Speetjens R, Dendorfer S (2011), "Subject-specific Musculoskeletal Simulation of Hip Dislocation Risk in Activities of Daily Living", In: 57th annual meeting of the orthopaedic research Society. [PDF]	orthopedicsautomotivehip
2011	Rasmussen J, Olesen CG, Lund ME, Andersen MS, Farahani SD, de Zee M (2011), "Prediction of motion in musculoskeletal models", XIII International Symposium on Computer Simulation in Biomechanics. [PDF]	methods
2011	Ribeiro A, Rasmussen J, Flores P, Silva LF (2011), "Biomechanical multibody knee model with condyle contact: modeling, simulation and analysis", .
2011	Robie B, Dendorfer S, Rasmussen J, Tørholm S (2011), "Axial Rotation Requires Greatest Load in Multifidus Muscle - Potential Association with Low Back Pain?", 2011 Annual Meeting of the AANS/CNS Section on Disorders of the Spine and Peripheral Nerves, Phoenix, Arizona. [PDF]	orthopedicsspine
2011	Rohlmann A, Han KS, Zander T, Taylor WR (2011), "A validated thoraco-lumbar spine model for prediction of muscle forces", Eurospine. [PDF]	spinemethodsvalidation
2011	Rohner C (2011), "Berechnung der Kniedynamik beim Gehen durch Nutzung von experimentell ermittelter passiver Kniesteifigkeit und simulierten Muskelkräften (In German) [Calculation of knee-dynamics during walking using experimentally determined passive knee stiffness and si", Thesis, Zurich University of Applied Science, Switzerland.	orthopedicsknee
2011	Sabharwal P (2011), "A combined in-vivo/in-vitro approach to study knee injury mechanism", Thesis, University of Waterloo, Canada. [WWW]	knee
2011	Sandholm A, Schwartz C, Pronost N, de Zee M, Voigt M, Thalmann D (2011), "Evaluation of a geometry-based knee joint compared to a planar knee joint", Vis. Comput., vol. 27, pp. 161-171. [DOI, WWW]	kneegait
2011	Schwarze M, Welke B, Seehaus F, Oehler S, Hurscheler C (2011), "Validation of an inverse dynamic model: Loads at the prosthesis interface of above-knee amputees", In: Poster presented at the DGfB, 19-21 May 2011, Murnau (Germany),, pp. 1-1 p.. [PDF]	lower extremitygaitvalidationrehab
2011	Schwarze M, Welke B, Seehaus F, Schmalz T, Hurschler C (2011), "Stress Resultants in Proximal Femur of Transfemural Amputees During Different Cases of Falling: A Multi-Body Simulation", , pp. 1-1 p.. [PDF]	lower extremitygaitrehab
2011	Sun Y, Moore C, Nimbarte A (2011), "Musculoskeletal Loading During Dynamic Two-Wheeled Cart Pushing and Pulling", IIE Annual Conference.. [WWW]	work place ergonomicsshoulderspine
2011	Sørensen K, de Zee M, Rasmussen J (2011), "A biomechanical analysis of clear strokes in badminton executed by youth players of different skill levels", Proceedings of the International Society of Biomechanics Conference 2011 Brussels. [PDF]	sports
2011	Taylor PR, Day RE, Nicholls RL, Rasmussen J, Yates PJ, Stoffel KK (2011), "The comminuted midshaft clavicle fracture: a biomechanical evaluation of plating methods", Clin. Biomech. , vol. 26, pp. 491-496. [DOI]	orthopedicsupper extremitytrunk
2011	Toh JJ, Kin L, Xie W (2011), "Investigation of the Moment of Inertia and the Biomechanical Internal Forces Acting on the Knee During Hiking", Portuguese Journal of Sport Sciences, vol. 11 . [PDF]	sportsknee
2011	Voinescu M, Soares D, Castro M, Mendes E, Davidescu A, Machado L (2011), "A study of moments acting on the tibia during gait in the active elderly population", Portuguese Journal of Sport Sciences, vol. 11 (Suppl., pp. 575-578. [PDF]	orthopedicssportslower extremitygait
2011	Wong C (2011), "The Influence of Muscle Forces on the Stress Distribution in the Lumbar Spine", TOSPINEJ, vol. 3, pp. 21-26. [DOI, WWW]	spineFEA
2011	Worsley P (2011), "Assessment of short-term knee arthroplasty function using clinical measures, motion analysis, and musculoskeletal modelling", Thesis, University of Southampton. [WWW]	orthopedicskneegaitmethodsvalidation
2011	Worsley P, Stokes M, Taylor M (2011), "Predicted knee kinematics and kinetics during functional activities using motion capture and musculoskeletal modelling in healthy older people", Gait Posture, vol. 33, pp. 268-273. [DOI]	kneeleggait
2011	Wu JZ, Sinsel E, Gloekler D, Wimer B, Zhao K, An KN, Buczek F (2011), "Joint loading of the thumb while operating a mechanical pipette - an inverse dynamics approach", In: ASB, pp. 2-2 pp.. [PDF]	work place ergonomicshand
2011	Zander T, Rohlmann A, Dreischarf M, Han KS, Bergmann G (2011), "Impact of the Number of Artificial Discs on Spinal Balance", EuroSpine. [PDF]	orthopedicsspine
2011	Zhou L, Bai S, Hansen MR, Rasmussen J (2011), "odeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories", MIC, vol. 32, pp. 91-101. [DOI, WWW]	upper extremitymethodsvalidation
2011	binti Abdul Majid NA (2011), "Musculoskeletal analysis of driving fatigue: The influence of seat condition", Thesis, Meiji University, Japan. [PDF]	automotiveupper extremityspinelower extremityseatingvalidation
2011	binti Abdul Majid NA, Notomi M, Rasmussen J (2011), "Musculoskeletal computational analysis of the influence of car-seat design/adjustment on fatigue-induced driving", In: 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization, pp. 1-6. [DOI]	automotiveseating
2010	Agarwal P, Narayanan MS, Lee LF, Mendel F, Krovi VN (2010), "Simulation-Based Design of Exoskeletons Using Musculoskeletal Analysis", In: ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1357-1364. [DOI, WWW]	exoskeletonupper extremityrehab
2010	Alkjaer T, Wieland MR, Andersen MS, Simonsen EB, Rasmussen J (2010), "ACL Research Retreat V", J. Athl. Train., vol. 45, pp. 522-541. [DOI, WWW]	sportskneerehab
2010	Andersen MS, Benoit DL, Damsgaard M, Ramsey DK, Rasmussen J (2010), "Do kinematic models reduce the effects of soft tissue artefacts in skin marker-based motion analysis? An in vivo study of knee kinematics", J. Biomech., vol. 43, pp. 268-273. [DOI]	kneegaitmethods
2010	Andersen MS, Damsgaard M, MacWilliams B, Rasmussen J (2010), "A computationally efficient optimisation-based method for parameter identification of kinematically determinate and over-determinate biomechanical systems", Comput. Methods Biomech. Biomed. Engin., vol. 13, pp. 171-183. [DOI]	gaitmethods
2010	Andersen MS, Rasmussen J, Ramsey DK, Benoit DL (2010), "Validation of Knee Joint Models – An In Vivo Study", Book Chapter, In: 6th World Congress of Biomechanics (WCB 2010). August 1-6, 2010 Singapore, pp. 1288-1291. [PDF, DOI, WWW]	kneevalidation
2010	Bastrup J, Andersen AS, Fakhri SF, Rasmussen CE (2010), "Ryggens biomekanik (in Danish) [The biomechanics of the back]", . [WWW]	spine
2010	Bresnahan L, Fessler RG, Natarajan RN (2010), "Evaluation of change in muscle activity as a result of posterior lumbar spine surgery using a dynamic modeling system", Spine , vol. 35, pp. E761-7. [DOI]	orthopedicsspinevalidation
2010	Cao E, Inoue Y, Liu T, Shibata K (2010), "Analysis of muscle forces in lower limbs based on wearable sensors", In: The 2010 IEEE International Conference on Information and Automation, pp. 185-190. [DOI]	lower extremityfootvalidation
2010	Carbes S, Telfer ST, Woodburn J, Oosterwaal M, Rasmussen J (2010), "A new multisegmental foot model and marker protocol for accurate simulation of the foot biomechanics during walking", ISB 2011 Brussels. [PDF]	footmethods
2010	Chu A, Hughes RE (2010), "A method to determine whether a musculoskeletal model can resist arbitrary external loadings within a prescribed range", Comput. Methods Biomech. Biomed. Engin., vol. 13, pp. 795-802. [DOI]	orthopedicsshouldermethods
2010	Dendorfer S, Rasmussen J, Christensen ST, Robie B (2010), "The Effect of Spinal Disc Herniation on Multifidus Muscles", 56th Annual Orthopaedic Research Society Meeting, New Orleans, USA, vol. 56th Annua.	orthopedicsspine
2010	Grujicic M, Arakere G, Xie X, LaBerge M, Grujicic A, Wagner DW, Vallejo A (2010), "Design-optimization and material selection for a femoral-fracture fixation-plate implant", Mater. Des., vol. 31, pp. 3463-3473. [DOI, WWW]	orthopedicsupper extremitylower extremitylegFEA
2010	Grujicic M, Pandurangan B, Xie X, Gramopadhye AK, Wagner D, Ozen M (2010), "Musculoskeletal computational analysis of the influence of car-seat design/adjustments on long-distance driving fatigue", Int. J. Ind. Ergon., vol. 40, pp. 345-355. [DOI, WWW]	automotivespineseating
2010	Kersting UG, Gurney JK, Lewis S, Rasmussen J (2010), "An individualized musculoskeletal model for the analysis of amputee running", In: Proceedings of the 28th Conference of the International Society of Biomechanics in Sports, ISBS, 19-23 July 2010, Marquette, MI, USA, pp. 142-144. [PDF]	sportsrehab
2010	Kooi FV (2010), "MUSCULOSKELETAL ANALYSIS OF LIGHT POSTURAL MOVEMENTS DURING SITTING", .	validation
2010	Kurpiers N (2010), "Dynamics of freestyle skiing: equipment development and implications for injury prevention strategies", Thesis, The University of Auckland, New Zealand. [WWW]	sportsknee
2010	Kwan M (2010), "Designing the World’s Best Badminton Racket", Thesis, Aalborg University, Denmark. [PDF]	sports
2010	Kwan M, Cheng CL, Tang WT, Rasmussen J (2010), "Erratum to: Measurement of badminton racket deflection during a stroke", Sports Eng., vol. 12, pp. 213-213. [DOI, WWW]	sports
2010	Lund ME, Andersen MS, Rasmussen J (2010), "Patient-specific optimized kinematic models of the leg", In: Presented at the 2nd Annual Meeting of the Danish Biomechanical Society, Aalborg, Denmark, pp. 1-1 p.. [PDF]	lower extremitymethods
2010	Ma C, Zhang M, Tan C, Zhang C, Su W (2010), "Analysis of lower-limb muscle activities during whole body vibration with different standing postures", In: 2010 3rd International Conference on Biomedical Engineering and Informatics, pp. 1797-1801. [DOI]	lower extremityvalidation
2010	Manders CJ (2010), "Combined musculoskeletal and finite element modelling of total hip replacement to account for surgical and patient related factors", Thesis, University of Southampton. [WWW]	orthopedicshipgaitFEA
2010	Meijer K, Oomen P, Rausch J, Annegarn J, Rasmussen J, Siebertz K (2010), "A comparison of two different strength scaling methods for multi body modeling", In: IUTAM 2010, Leuven, Belgium, pp. 2-2 pp.. [PDF]	methods
2010	Nakashima M (2010), "Modeling and Simulation of Human Swimming", Journal of Aero Aqua Bio-mechanisms, vol. 1, pp. 11-17. [DOI]	sports
2010	Nakashima M, Komura T (2010), "An Analysis of Muscle Load on the Erector Spinae of a Pregnant Woman", JBSE, vol. 5, pp. 357-367. [DOI, WWW]	spinevalidation
2010	Nucibella E (2010), "Development of musculoskeletal model for biomechanical analysis of trans-tibial amputee gait", Thesis, University of Padova, Italy. [PDF]	lower extremitygaitrehab
2010	Olesen CG, Busscher L, de Zee M, Rasmussen J (2010), "The significance of passive stiffness to a computational musculo-skeletal spine model of a seated human", .
2010	Olesen CG, de Zee M, Rasmussen J (2010), "Why is the Etiology of Pressure Ulcers Still Unknown?", .
2010	Olesen CG, de Zee M, Rasmussen J (2010), "Using a Computer Model to Bridge Published Experimental Seated Posture Results", In: Proceedings of the EPUAP 2010 Annual Conference. Birmingham, United Kingdom.	seatingrehab
2010	Phillips CW, Forrester AI, Purdue AI, Stokes MJ (2010), "Optimisation of a bicycle chainring to aid in rehabilitation of athletes suffering from patellofemoral pain syndrome (PFPS)", Procedia Engineering, vol. 2, pp. 3151-3156. [DOI, WWW]	sportsrehab
2010	Purdue AI, Forrester AI, Taylor M, Stokes MJ, Hansen EA, Rasmussen J (2010), "Efficient human force transmission tailored for the individual cyclist", Procedia Engineering, vol. 2, pp. 2543-2548. [DOI, WWW]	sports
2010	Racine JO (2010), "Estimation de léffet dúne force virtuelle sur les forces de contact lors de la transition assis-debout (In French) [Estimating the effect of a virtual force contact during the transition seated-upright]", Thesis, Université du Québec, Canada. [WWW]	hipkneerehab
2010	Rasmussen J, Andersen MS, Bichler R, Carbes S, de Zee M (2010), "Hip Joint Kinematics in Activities of Daily Living", J. Biomech., vol. 43 , pp. 25.	orthopedicsautomotivehipmethods
2010	Rasmussen J, Kwan MM, Andersen MS, de Zee M (2010), "Analysis of segment energy transfer using musculoskeletal models in a high speed badminton stroke", .	sports
2010	Rasmussen J, de Zee M (2010), "Computational investigation of two interventions for neck and upper extremity pain in office workers", In: 6th World Congress of Biomechanics (WCB 2010). August 1-6, 2010 Singapore, pp. 4-4 pp.. [PDF, DOI, WWW]	work place ergonomicsupper extremityspine
2010	Saraswat P (2010), "Foot model for clinical application", Thesis, The University of Utah, UT, United States. [PDF]	orthopedicsfootgait
2010	Saraswat P, Andersen MS, Macwilliams BA (2010), "A musculoskeletal foot model for clinical gait analysis", J. Biomech., vol. 43, pp. 1645-1652. [DOI]	footleggaitmethodsvalidation
2010	Schwartz C, Lund ME, de Zee M, Rasmussen J (2010), "Prediction of Knee Loads Using a Lower Extremity Model Based on the Klein Horsman Data Set", In: ASME 2010 Summer Bioengineering Conference, pp. 269-270. [PDF, DOI, WWW]	legvalidation
2010	Si W, Yan ZZ, Li Y, Liu SP (2010), "The Crouch Start Modeling and Simulation Based on AnyBody Technology", JDCTA: International Journal of Digital Content Technology and its Applications, vol. 4, pp. 8-14. [WWW]	sports
2010	Ting-Liters C (2010), "Design an elder-friendly vehicle ingress space using musculoskeletal simulation", Thesis, National Chiao Tung University, Taiwan. [WWW]	automotive
2010	Wagner DW, Divringi K, Ozcan C, Grujicic M, Pandurangan B, Grujicic A (2010), "Combined musculoskeletal dynamics/structural finite element analysis of femur physiological loads during walking", Multidiscipline Modeling in Materials and Structures, vol. 6, pp. 417-437. [DOI]	orthopedicslower extremitygaitFEA
2010	Weber T (2010), "Functional outcome of navigated minimally invasive total hip endoprosthesis using muculoskeletal modeling", Thesis, University of Applied Science Regensburg, Germany. [PDF]	orthopedicshipgait
2010	Wehner T, Claes L, Niemeyer F, Nolte D, Simon U (2010), "Influence of the fixation stability on the healing time--a numerical study of a patient-specific fracture healing process", Clin. Biomech. , vol. 25, pp. 606-612. [DOI]	orthopedicsFEA
2010	Wehner T, Wolfram U, Henzler T, Niemeyer F, Claes L, Simon U (2010), "Internal forces and moments in the femur of the rat during gait", J. Biomech., vol. 43, pp. 2473-2479. [DOI]	orthopedicslower extremityanimalsensitivity analysis
2010	Welke B, Hurschler C, Windhagen H, Calließ T, Schwarze M, Oehler S, Mücke S, Kraft M, Seehaus F (2010), "Validierung einer muskuloskelettalen Mehrkörpersimulation zur Ermittlung der Belastungen im Bereich der transfemuralen osseofixierten Endo-Exo-Prothese während des Gehens [Validation of a musculoskeletal multi-body simulation to determine the stresses in", BMT 2010, 44. DGBMT Jahrestagung, Rostock, Germany. [WWW]	lower extremityvalidationrehab
2010	Worsley P, Stokes M, Taylor M (2010), "Comparison of Osteoarthritic Knee Kinematics and Kinetics with Age Matched Healthy Individuals", J. Biomech., pp. S29-S29. [WWW]	orthopedicsknee
2010	Worsley P, Taylor M, Stokes M (2010), "Robustness of optimised motion capture and musculoskeletal modelling of Gait", In: 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. [PDF]	gait
2010	Wu JZ, An KN, Cutlip RG, Dong RG (2010), "A practical biomechanical model of the index finger simulating the kinematics of the muscle/tendon excursions", Biomed. Mater. Eng., vol. 20, pp. 89-97. [DOI]	handvalidation
2010	Xie X (2010), "Combined musculo-skeletal multi-body dynamics/finite element analysis of several ergonomics and bio-mechanics problems", Thesis, Clemson University, SC, United States. [WWW]	orthopedicsautomotiveFEA
2010	de Zee M, Lund ME, Schwartz C, Olesen CG, Rasmussen J (2010), "Validation of musculoskeletal models: the importance of trend validations", In: IUTAM 2010, Leuven, Belgium, pp. 2-2 pp.. [PDF]	kneeseatingvalidation
2009	Andersen MS (2009), "Kinematically Over-determinate Musculoskeletal Systems", Thesis, Aalborg University. [PDF]	lower extremitygaitmethodsvalidation
2009	Andersen MS, Damsgaard M, Rasmussen J (2009), "Kinematic analysis of over-determinate biomechanical systems", Comput. Methods Biomech. Biomed. Engin., vol. 12, pp. 371-384. [DOI]	gaitmethods
2009	Andersen MS, De Zee M, Dendorfer S, MacWilliams B, Rasmussen J (2009), "Validation of a detailed lower extremity model based on the Klein Horsman data set", In: XII International Symposium on Computer Simulation in Biomechanics, pp. 27-28. [PDF]	lower extremityvalidation
2009	Chang CY, Rupp JD, Reed MP, Hughes RE, Schneider LW (2009), "Predicting the effects of muscle activation on knee, thigh, and hip injuries in frontal crashes using a finite-element model with muscle forces from subject testing and musculoskeletal modeling", Stapp Car Crash J., vol. 53, pp. 291-328. [WWW]	automotivehiplower extremitykneeFEAvalidation
2009	Chao M, Ming Z, Chun-lin Z, Zhi-xiang L, Jian-xin Y (2009), "Analysis of Human Joint Forces in Standing Posture", J. Beijing Inst. Technol. . [WWW]	lower extremity
2009	Chia-Yuan C (2009), "Prediction of the Effects of Lower-extremity Muscle Forces on Knee, Thigh, and Hip Injuries in Frontal Motor Vehicle Crashes. and Hip Injuries in Frontal Motor Vehicle Crashes", Thesis, University of Michigan. [WWW]	automotivelower extremity
2009	De Zee M, Cattaneo PM, Svensson P, Pedersen TK, Melsen B, Rasmussen J, Dalstra M (2009), "Prediction of the articular eminence shape in a patient with unilateral hypoplasia of the right mandibular ramus before and after distraction osteogenesis—A simulation study", J. Biomech., vol. 42, pp. 1049-1053. [DOI, WWW]	orthopedicsmandiblevalidation
2009	Eltoukhy M, Asfour S (2009), "Implementation and validation of a detailed three dimensional inverse dynamics lower extremity model for gait analysis applications", In: Proceedings of the XXIst Annual International Occupational Ergonomics and Safety Conference, Dallas, Texas, pp. 57-62.	hiplower extremitykneegaitvalidation
2009	Fukui H, Sakamoto J, Murakami H, Oda J, Tomita K, Higaki H (2009), "Biomechanical Analysis of Influence of Spinal Fixation on Intervertebral Joint Force by Using Musculoskeletal Model", In: 13th International Conference on Biomedical Engineering IFMBE Proceedings, pp. 1712-1715.	orthopedicsspine
2009	Grujicic M, Pandurangan B, Arakere G, Bell WC, He T, Xie X (2009), "Seat-cushion and soft-tissue material modeling and a finite element investigation of the seating comfort for passenger-vehicle occupants", Mater. Des., vol. 30, pp. 4273-4285. [DOI, WWW]	automotiveseatingmethodsFEA
2009	Hansen EA, Jensen K, Hallén J, Rasmussen J, Pedersen PK (2009), "Effect of chain wheel shape on crank torque, freely chosen pedal rate, and physiological responses during submaximal cycling", J. Physiol. Anthropol., vol. 28, pp. 261-267. [PDF, DOI, WWW]	sports
2009	Jung M, Cho H, Roh T, Lee K (2009), "Integrated Framework for Vehicle Interior Design Using Digital Human Model", J. Comput. Sci. Technol., vol. 24, pp. 1149. [DOI, WWW]	automotivemethods
2009	Kersting UG, de Zee M (2009), "Reflex responses and ankle joint loading during perturbed turning movements", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF]	ankle
2009	Kim SH, Lee K (2009), "Development of discomfort evaluation method for car ingress motion", Int. J. Automot. Technol. Manage., vol. 10, pp. 619-627. [DOI]	automotivemethods
2009	Koller T, Brodie M, Litzenberger S, Sabo A (2009), "Biomechanische Bewegungs- und Belastungsanalyse im modernen Skisport mittels Mehrkörpersimulation in AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF]	sports
2009	Lee LF, Narayanan MS, Kannan S, Mendel F, Krovi VN (2009), "Case Studies of Musculoskeletal-Simulation-Based Rehabilitation Program Evaluation", IEEE Trans. Rob., vol. 25, pp. 634-638. [DOI]	upper extremityrehab
2009	Manders C, New A (2009), "Effect of Surgical Approach on Femoral Strain Distribution after Total Hip Replacement", 55th Annual Meeting of the Orthopaedic Research Society. [PDF]	orthopedicshipFEA
2009	Olesen CG, Andersen MS, Rathleff MS, De Zee M, Rasmussen J (2009), "Understanding the biomechanics of medial tibial stress syndrome: a simulation study using a musculoskeletal model", In: Congress of the International Society of Biomechanics, ISB, pp. 1-1 p.. [PDF, WWW]	lower extremityrehab
2009	Olesen CG, de Zee M, Rasmussen J (2009), "Experimental Validation of a Computational Human Seating Model", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF]	seatingvalidation
2009	Parasuraman S, Yee KC (2009), "Bio-Mechanical Analysis of Human Hand", In: 2009 International Conference on Computer and Automation Engineering, pp. 93-97. [DOI]	handrehab
2009	Parasuraman S, Yee KC, Oyong A (2009), "Human upper limb and arm kinematics for robot based rehabilitation", In: 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, pp. 845-850. [DOI]	exoskeletonupper extremityrehab
2009	Rasmussen J, Carbes S, Gomaa ST (2009), "A computational model of a reverse shoulder joint prosthesis", In: Presented at the Symposium on Computational Methods in Orthopaedic Biomechanics (Pre-ORS), Las Vegas, 2009, pp. 1-1 p.. [PDF]	orthopedicsshoulder
2009	Rasmussen J, Tørholm S, de Zee M (2009), "Computational analysis of the influence of seat pan inclination and friction on muscle activity and spinal joint forces", Int. J. Ind. Ergon., vol. 39, pp. 52-57. [DOI, WWW]	spineseating
2009	Rasmussen J, de Zee M, Carbes S (2009), "Validation of a biomechanical model of the lumbar spine", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF]	spinevalidation
2009	Rasmussen J, de Zee M, Dahl J, Damsgaard M (2009), "Salient properties of a combined minimum fatigue and quadratic muscle recruitment criterion", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 13-14. [PDF]	methods
2009	Sakamoto J, Fukui H, Minowa T, Murakami H, Kawahara N, Tomita K (2009), "Mechanical analysis of spine with kyphosis due to compression fracture of osteoporotic vertebra", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 19-20. [PDF]	orthopedicsspine
2009	Sakamoto J, Nakada Y, Murakami H, Kawahara N, Oda J, Tomita K, Higaki H (2009), "Musculoskeletal Analysis of Spine with Kyphosis Due to Compression Fracture of an Osteoporotic Vertebra", Book Chapter, In: Lim CT, Goh JC (Ed): 13th International Conference on Biomedical Engineering, pp. 1588-1591. [DOI, WWW]	orthopedicsspine
2009	Schwirtz A, Bichler R, Kaiser R (2009), "Method for biomechanical evaluation of the ingress and egress motion", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF]	automotive
2009	Sellgren U, Söderberg A (2009), "Robust brake feel design", Proc. Nafems World Congress 09, June 16-19, 2009, Crete, Greece. [WWW]	automotive
2009	Siebertz K, Rausch J (2009), "Computer aided ergonomics case study: Vehicle brake system", In: Presented at the ANSYS Conference & 27th.CADFEM Users ́Meeting, pp. 12-12 pp.. [PDF]	automotive
2009	Thielen T, Maas S, Zürbes A, Waldmann D, Kelm J (2009), "Entwicklung einer Hüftinterimsprothese (Spacer) mittels FE-Analyse unter Berücksichtigung der Muskel- und Gelenkkräfte aus AnyBody [Development of a hip interim prosthesis (spacer) using finite element analysis taking into account the muscle and joint for", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF]	orthopedicshipvalidation
2009	Wehner T, Claes L, Simon U (2009), "Internal loads in the human tibia during gait", Clin. Biomech. , vol. 24, pp. 299-302. [DOI]	orthopedicsgait
2009	Worsley P, Warner M, Delaney S, Stokes M, Taylor M (2009), "The application of ultrasound imaging in the musculoskeletal modeling process", 55th Annual Meeting of the Orthopaedic Research Society, February 22-25, 2009, vol. Las Vegas,, pp. 1501. [PDF]	methods
2009	Wu JZ, An KN, Cutlip RG, Andrew ME, Dong RG (2009), "Modeling of the muscle/tendon excursions and moment arms in the thumb using the commercial software anybody", J. Biomech., vol. 42, pp. 383-388. [DOI]	handvalidation
2009	Wu JZ, Chiou SS, Pan CS (2009), "Analysis of musculoskeletal loadings in lower limbs during stilts walking in occupational activity", Ann. Biomed. Eng., vol. 37, pp. 1177-1189. [DOI]	exoskeletonwork place ergonomicshiplower extremitykneeankle
2009	Wu JZ, Li ZM, Cutlip RG, An KN (2009), "A simulating analysis of the effects of increased joint stiffness on muscle loading in a thumb", Biomed. Eng. Online, vol. 8, pp. 41. [DOI]	hand
2009	Wyss C (2009), "Muscle Modelling mit AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF]	footFEA
2009	Wyss C, Roethlisberger M, Gerber H (2009), "Intraarticular and muscle force reactions of the leg using different insoles", In: Proceedings of the ESB 2009 Workshop, June 7-9, 2009, Zürich, Switzerland, pp. 1-1 p.. [PDF]	lower extremitygaitrehab
2009	Zander T, Rohlmann A, Bergmann G (2009), "How important is the correct placement of artificial discs?", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF]	orthopedicsspine
2009	de Zee M, Mikkelsen P, Wong C, Simonsen EB, Rasmussen J (2009), "The Influence of the Center of Rotation on Facet Joint Loading and End Plate Loading Investigated with Musculoskeletal Simulation", In: Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p.. [PDF]	spine
2009	de Zee M, Rasmussen J (2009), "Using musculoskeletal modeling for estimating the most important muscular output: force", In: 3D Physiological Human Workshop, 3DPH, Zermatt, Switzerland. 29. November - 02. December, pp. 62-70.	methods
2008	Arakilo M (2008), "Joint forces within the ankle during level walking", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF]	anklegait
2008	Dubowsky SR (2008), "Multibody computational biomechanical model of the upper body", Thesis, Rutgers, The State University of New Jersey, NJ, United States. [WWW]	shouldervalidationrehab
2008	Dubowsky SR, Rasmussen J, Sisto SA, Langrana NA (2008), "Validation of a musculoskeletal model of wheelchair propulsion and its application to minimizing shoulder joint forces", J. Biomech., vol. 41, pp. 2981-2988. [DOI]	shouldervalidationrehab
2008	Duffett GA, Badillo H, Carbes S, Kiis A (2008), "Design and Optimization for Human Well-Being and Overall System Performance", In: Presented at the modeFrontier User Meeting 2008, 14-15 October 2008, Trieste, Italy, pp. 13-13 pp.. [PDF]	methods
2008	Finley JM, Perreault EJ, Dhaher YY (2008), "Stretch reflex coupling between the hip and knee: implications for impaired gait following stroke", Exp. Brain Res., vol. 188, pp. 529-540. [PDF, DOI]	hipkneegait
2008	Fritz NM (2008), "Musculoskeletal Model, Countermeasure and Bone Analysis for Astronauts", ANSYS Conference & 26th. CADFEM Users’ Meeting. [PDF]	aerospace
2008	Holmberg JL (2008), "Computational Biomechanics in Cross-country Skiing", Thesis, Institutionen för ekonomisk och industriell utveckling. [WWW]	sports
2008	Holmberg LJ, Lund. AM (2008), "A musculoskeletal full-body simulation of cross-country skiing", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, vol. 222 , pp. 11-22.	sports
2008	Kannan S (2008), "Quantitative Analysis of Masticatory Performance in Vertebrates", Thesis, State University of New York at Buffalo, NY, United States. [WWW]	mandibleanimal
2008	Manders C, New A, Rasmussen. J (2008), "Validation of musculoskeletal gait simulation for use in investigation of total hip replacement", J. Biomech., vol. S41 , pp. S488-S488. [PDF]	orthopedicshipgaitvalidation
2008	Narayanan MS, Kannan S, Lee LF, Mendel F, Krovi VN (2008), "Virtual musculoskeletal scenario-testing case-studies", In: 2008 Virtual Rehabilitation, pp. 150-156. [DOI]	methods
2008	Nolte A, Augat P, Rasmussen J (2008), "Analysis of the muscle and joint forces in the shoulder joint using the AnyBody simulation model", In: Poster presented at the ESB2008 conference, Luzern, Switzerland, pp. 1-1 p.. [PDF, WWW]	shouldervalidation
2008	Rasmussen J (2008), "Prediction of human posture and movement by musculoskeletal optimization - or Can AnyBody do the Limbo?", In: Poster presented at the ASME 2008 summer bioengineering conference, Marco Island, Florida, June 29-29, pp. 1-1 p.. [PDF]	methods
2008	Rasmussen J, de Zee M (2008), "Design Optimization of Airline Seats", SAE Int. J. Passeng. Cars – Electron. Electr. Syst., vol. 1, pp. 580-584. [DOI, WWW]	aerospaceseating
2008	Rose M (2008), "Biomechanical Analysis of Anterior Cruciate Ligament Injury Mechanisms", Thesis, Aalborg University, Denmark. [PDF]	kneegait
2008	Siebertz K, Rausch J (2008), "The AnyBody Car Driver Model, a CAE tool to evaluate comfort", Conference article from FISITA. [WWW]	automotivevalidation
2008	Simon U, Niemeyer F, Claes L, Wehner T (2008), "Patient specific fracture healing simulation", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF]	orthopedicslower extremity
2008	Simon U, Wehner T, Cosgun I, Henzler T, Claes L, Wolfram U (2008), "Musculoskeletal model for the rat hind limb", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF]	lower extremityanimal
2008	Wu JZ, An KN, Cutlip RG, Krajnak K, Welcome D, Dong RG (2008), "Analysis of musculoskeletal loading in an index finger during tapping", J. Biomech., vol. 41, pp. 668-676. [DOI]	work place ergonomicshandvalidation
2008	Wu JZ, Chiou SS, Pan CS (2008), "Analysis of the effects of stilts walking on musculoskeletal loading in low extremities", In: poster presented at the NACOB2008 conference, Ann Arbor, MI, pp. 1-1 p.. [PDF]	exoskeletonwork place ergonomicslower extremity
2007	Andersen MS, Alkjær T, Rasmussen J, Damsgaard M (2007), "Marker Position Determination and Kinematic Analysis of a Patient-specific Lunge Model", In: International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p.. [PDF]	lower extremitymethods
2007	Collet Y, Rasmussen J, Nuño N, Tétrault P, Hagemeister N (2007), "Computational Modeling of the shoulder and improvement of a new prosthetic design for massive rotator cuff tears: our experience with the AnyBody Modeling System", In: Proceedings of the 18th IASTED International Conference on Modelling and Simulation - MS 2007. / R. Wamkeue (ed.) IASTED, pp. 624-627. [WWW]	orthopedicsshoulder
2007	Collet Y, Tétreault P, Rasmussen J, Nuño N, Hagemeister N (2007), "Computational modeling of a prosthetic shoulder: our experience with the anybody modeling system", In: Proceedings of the IASTED International Conference on Modelling and Simulation, pp. 624-629. [WWW]
2007	Haahr J (2007), "Planning and conduction of a validation experiment - Simulation of driving situations in a Ford vehicle", Thesis, Aalborg University, Denmark. [PDF]	automotivevalidation
2007	Karlsson D, Osvalder AL, Rasmussen J (2007), "Towards better seating design – a discussion and comparison between office chairs and car seats", In: Nordic Ergonomics Society Conference 2007, Lysekil, Sweden, pp. 6-6 pp.. [PDF]	work place ergonomicsseating
2007	Lund AM, Holmberg LJ (2007), "Which are the antagonists to the pectoralis major muscle in 4th gear, freestyle technique, cross-country skiing?", Science and Nordic Skiing, Linnamo, V. , Komi, PV and Müller, E. (Eds. ). [WWW]	sports
2007	Manders C, New A, Rasmussen J (2007), "Validation of Hip Joint Force Simulation by Gait Analysis", ANSYS Conference & 25th.CADFEM Users’ Meeting. [PDF]	hipgaitvalidation
2007	Nakashima M, Motegi Y (2007), "Development of a Full-Body Musculoskeletal Simulator for Swimming", In: Proceedings of the 2007 International Symposium on Computer Simulation in Biomechanics (ISCSB2007), pp. 59-60. [PDF]	sportsmethodsvalidation
2007	Nolte A (2007), "Untersuchung der Muskel- und Gelenkkräfte im Schultergelenk mithilfe eines Simulationsmodells der Software AnyBody (In German) [Investigation of the muscle- and joint forces in the shoulder joint using AnyBody software]", Thesis, Unfallklinik Murnau, Germany and Paracelsus Medizinischen Privatuniversität Salzburg, Austria. [PDF]	shouldervalidation
2007	Rasmussen J (2007), "AnyBody: CAE for the human body", ANSYS Conference & 25th.CADFEM Users’ Meeting. [PDF]	methods
2007	Rasmussen J, Gielo-Perczak K (2007), "Biomechanical modeling of the shoulder anatomy", Book Chapter, In: Biomechanics in Ergonomics, Second Edition, pp. 395-404. [DOI]	work place ergonomicsshoulder
2007	Rasmussen J, de Zee M, Christensen ST, Damsgaard M (2007), "Comparison of a musculoskeletal shoulder model with in-vivo joint forces", In: Presented at the International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p.. [PDF]	shouldervalidation
2007	Rasmussen J, de Zee M, Tørholm S (2007), "Muscle Relaxation and Shear Force Reduction May Be Conflicting: A Computational Model of Seating", In: SAE Technical Paper Series, pp. Seattle,-Seattle, WA. [DOI, WWW]	automotiveseating
2007	Renner S (2007), "Determination of muscle forces acting on the femur and stress analysis", Thesis, Technische Universität München, Germany. [PDF]	hiplower extremitygaitFEAvalidation
2007	Sullivan SR, Langrana NA, Sisto SA (2007), "Shoulder mechanics: analytical modeling and validation", In: Presentation at the American Soc. of Biomechanics Annual Meeting, pp. 2-2 pp.. [PDF]	shouldervalidation
2007	Wagner DW, Reed MP, Rasmussen J (2007), "Assessing the Importance of Motion Dynamics for Ergonomic Analysis of Manual Materials Handling Tasks using the AnyBody Modeling System", In: SAE Technical Paper Series, pp. Seattle,-Seattle, WA. [DOI, WWW]	work place ergonomicsspine
2007	Wilssens J, Hagman F (2007), "From High Speed Plantar Pressure Measurement to Lower Limb Skeletal Motion", In: 8th Biennial Footwear Biomechanics Symposium, June 27-29, 2007, National Yang Ming University, Taipei, Taiwan, pp. 2-2 pp.. [PDF]	footmethods
2007	de Zee M, Dalstra M, Cattaneo PM, Rasmussen J, Svensson P, Melsen B (2007), "Validation of a musculo-skeletal model of the mandible and its application to mandibular distraction osteogenesis", J. Biomech., vol. 40, pp. 1192-1201. [DOI]	orthopedicsmandiblemethodsvalidation
2007	de Zee M, Falla D, Farina D, Rasmussen J (2007), "Prediction of neuromuscular adaptation of experimentally induced neck pain using a musculoskeletal model", In: Presented at the 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan, pp. 2-2 pp.. [PDF]	spine
2007	de Zee M, Falla D, Farina D, Rasmussen J (2007), "Simulation of pain-induced alterations in cervical motor control", In: Poster presented at the World Congress on Neck Pain. January 20-22, Los Angeles, California, USA, pp. 1-1 p.. [PDF, WWW]	spine
2007	de Zee M, Falla D, Farina D, Rasmussen J (2007), "A DETAILED RIGID-BODY CERVICAL SPINE MODEL BASED ON INVERSE DYNAMICS", J. Biomech., vol. 40, pp. S284. [DOI, WWW]	spinemethods
2007	de Zee M, Hansen L, Wong C, Rasmussen J, Simonsen EB (2007), "A generic detailed rigid-body lumbar spine model", J. Biomech., vol. 40, pp. 1219-1227. [DOI]	spinevalidation
2006	Andersen MS, Damsgaard M, Rasmussen J (2006), "Marker-based motion reconstruction of constrained rigid-segment systems", In: Presented at the 9th International Symposium on the 3-D Analysis of Human Movement, 28-30 June, Valenciennes, France, pp. 4-4 pp.. [PDF]	methods
2006	Andre A, Carbes S, Ruiz JL (2006), "Development of a computer model of the thoracic human spine with an aim to investigate loss of stability in scoliosis", Thesis, Aalborg University, Denmark. [PDF]	orthopedicsspine
2006	Annegarn J (2006), "Scaling in human simulation models. The development of an isometric strength scaling method which needs easy accessible data only", Thesis, Maastricht University, The Netherlands.	methods
2006	Annegarn J, Rasmussen J, Savelberg HH, Verdijk LB, Meijer K (2006), "Scaling strength in human simulation models", In: 11th Symposium of the Flemish Society of Kinesiology, 20th September 2006, University Antwerp, pp. 1-1 p.. [PDF]	methodsvalidation
2006	Damsgaard M, Rasmussen J, Christensen ST, Surma E, de Zee M (2006), "Analysis of musculoskeletal systems in the AnyBody Modeling System", Simulation Modelling Practice and Theory, vol. 14, pp. 1100-1111. [DOI, WWW]	methods
2006	Haahr J, Madsen T (2006), "Application of a Biomechanical Model for Prediction of Muscle Activity Patterns during Different Arm Cranking Styles", .	upper extremityvalidation
2006	Hansen L, de Zee M, Rasmussen J, Andersen TB, Wong C, Simonsen EB (2006), "Anatomy and biomechanics of the back muscles in the lumbar spine with reference to biomechanical modeling", Spine , vol. 31, pp. 1888-1899. [DOI]	spinemethods
2006	Lee LF, Krovi VN (2006), "Musculoskeletal Simulation Based Optimization of Rehabilitation Program", In: 2006 International Workshop on Virtual Rehabilitation, pp. 36-41. [DOI]	rehab
2006	Rasmussen J, Christensen ST, Damsgaard M (2006), "Synthesis of natural movements by inverse dynamics musculoskeletal modelling", J. Biomech., vol. 39, pp. S45. [DOI]	methods
2006	Rasmussen J, Christensen ST, Siebertz K, Rausch J (2006), "Posture and Movement Prediction by Means of Musculoskeletal Optimization", In: SAE Technical Paper Series. [DOI, WWW]	automotivemethods
2006	Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Andersen MS (2006), "Musculoskeletal simulation of orthopedic surgical procedures", In: Miller K, Poulikakos D (Ed): Poster presented at the Workshop Proceedings of Computational Biomechanics for Medicine. MICCAI 2006, Copenhagen, Denmark, pp. 126-138. [PDF]	orthopedicsmethods
2006	Rausch J, Siebertz K, Christensen ST, Rasmussen J (2006), "Simulation des menschlichen Bewegungsapparates zur Innenraum-gestaltung von Fahrzeugen (in German) [Simulation of the human musculoskeletal system for vehicle interior design]", VDI Bericht, vol. 1967, pp. 1027-1048. [PDF]	automotivemethods
2006	Signore MJ (2006), "A Screw-Theoretic Framework for Musculoskeletal System Modeling and Analysis", Thesis, State University of New York at Buffalo, NY, United States. [PDF]	mandiblemethodsFEAanimal
2006	Svensson I, Jeppesen S, Segerström Å, Hansson GÅ (2006), "Use of inclinometers for measuring postures and movements in order to predict muscle activity", J. Biomech., vol. 39, pp. S93. [DOI, WWW]	methodsvalidation
2006	Vondrák V, Dostál Z, Rasmussen J, Damsgaard M (2006), "The algorithms of mathematical programming in muscle recruitment and muscle wrapping problems", Book Chapter, In: III European Conference on Computational Mechanics, pp. 194-194. [DOI, WWW]	methods
2006	de Jong P, de Zee M, Hilbers PA, Savelberg HH, van de Vosse FN, Wagemakers A, Meijer K (2006), "Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence", In: Poster presented at the 11th Symposium of the Flemish Society of Kinesiology, Antwerp, Belgium, pp. 1-1 p.. [PDF]	validation
2005	De Zee M, Rasmussen J, Lem J, Siebertz K (2005), "Computer Simulations of the Active Motion System with Musculo-skeletal Models", In: SAE Technical Paper Series, pp. 272-278. [DOI, WWW]	automotiveseating
2005	Konakanchi K (2005), "Musculo-skeletal Modeling of Smilodon fatalis for virtual functional performance testing", Thesis, State University of New York at Buffalo, NY, United States. [PDF]	mandibleanimal
2005	Lund M (2005), "Biomechanical study of cross-country skiing", Thesis, Umeå University, Sweden. [PDF]	sportsshoulder
2005	Perreault EJ, Viant TL (2005), "Neural coordination of multijoint stretch reflexes in the human arm", Conf. Proc. IEEE Eng. Med. Biol. Soc., vol. 4, pp. 4389-4392. [DOI]	upper extremitysensitivity analysis
2005	Rasmussen J, Christensen ST (2005), "Musculoskeletal Modeling of Egress with the AnyBody Modeling System", In: SAE Technical Paper Series, pp. 822-828. [DOI, WWW]	automotivemethods
2005	Rasmussen J, Christensen ST, Damsgaard M, de Zee M (2005), "Ergonomic optimization of a spring-loaded bicycle crank", In: 6th World Congress on Structural and Multidisciplinary Optimization. Rio de Janeiro, Brazil, pp. 8-8 pp.. [PDF, WWW]	sportsrehab
2005	Rasmussen J, Damsgaard M, Christensen ST, Kiis A (2005), "Computer-Aided Ergonomics - a new chapter in CAE?", ANSYS Conference & 23rd.CADFEM Users’ Meeting. [PDF]	methods
2005	Rasmussen J, Damsgaard M, Christensen ST, de Zee M (2005), "AnyBody - decoding the human musculoskeletal system by computational mechanics", In: Skallerud B, Andersson HI (Ed): Konferanse i beregningsorientert mekanikk (computational mechanics). Trondheim, Norway, pp. 43-59. [PDF]	automotivesportsmethodsrehab
2005	Rasmussen J, de Zee M, Damsgaard M, Christensen ST (2005), "Ergonomic Optimization of a Bicycle Crank Based on Musculoskeletal Modeling", In: 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp.. [PDF]	sportsmethods
2005	Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Marek C, Siebertz K (2005), "A General Method for Scaling Musculo-Skeletal Models", In: 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp.. [PDF, WWW]	automotivemethods
2005	Schaerer C (2005), "Muskuloskeletale Belastung und Beanspruchung des Femurs waehrend des Gangzyklus: Entwicklung und Vergleich unterschiedlicher Belastungsund Materialmodelle", Thesis, ETH Zürich, Switzerland. [PDF]	lower extremitygaitFEA
2005	Sullivan SR, Langrana NA, Sisto SA (2005), "Multibody Computational Biomechanical Model of the Upper Body", In: ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, pp. 1175-1180. [DOI, WWW]	shouldervalidationrehab
2004	Eshuis P (2004), "Knee Modelling", . [PDF]
2004	Gielo-Perczak K, Rasmussen J, Christensen ST (2004), "An Analysis of Load Transmission Within The Human Body During Pushing and Pulling", In: Proceedings of the XVIII Conference of the International Society for Occupational Ergonomics and Safety, Houston, TX, CD, Group 10, pp. 4-8. [WWW]	work place ergonomics
2004	Rasmussen J, Christensen ST, Gföhler M, Damsgaard M, Angeli T (2004), "Design optimization of a pedaling mechanism for paraplegics", Struct. Multidiscip. Optim., vol. 26, pp. 132-138. [DOI, WWW]	methodsrehab
2004	Rasmussen J, Søren TC, Damsgaard M, de Zee M (2004), "The role of mechanics and optimization in ergonomics", In: 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, July 12-13, 2004, pp. 10-10 pp.. [PDF, WWW]	work place ergonomicsrehab
2003	Christensen ST, Siebertz K, Damsgaard M, De Zee M, Rasmussen J, Paul G (2003), "Human Seat Modeling Using Inverse Dynamic Musculo-Skeletal Models", In: SAE Technical Paper Series, pp. 01-2221. [DOI, WWW]	automotiveseating
2003	Forster E (2003), "Predicting muscle forces in the human lower limb during locomotion", Thesis, University of Ulm, Germany. [WWW]	lower extremitygaitvalidation
2003	Holmberg J, Wagenius P (2003), "A biomechanical model of a double-poling skier", In: Milburn University of Otago Ped (Ed): International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., pp. 5-5 pp.. [PDF]	sports
2003	Jun SK, Zhou X, Ramsey DK, Krovi VN (2003), "A comparative study of human motion capture and computational analysis tools", In: The 2nd International Digital Human Modeling Symposium, Citeseer. [WWW]	methods
2003	Rasmussen J, Dahlquist J, Damsgaard M, de Zee M, Christensen ST (2003), "Musculoskeletal modeling as an ergonomic design method", In: International Ergonomics Association XVth Triennial Conference, August 24-29, 2003, Seoul, Korea, pp. 4-4 pp.. [PDF, WWW]	methods
2003	Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M (2003), "Designing a general software system for musculoskeletal analysis", In: IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 6-6 pp.. [PDF, WWW]	methods
2003	Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M, Vondrak V (2003), "AnyBody - a software system for ergonomic optimization", In: Fifth World Congress on Structural and Multidisciplinary Optimization, May 19-23, 2003, Lido di Jesolo - Venice, Italy, pp. 6-6 pp.. [PDF, WWW]	methods
2003	de Zee M, Andersen TB, Hansen L, Wong C, Rasmussen J, Simonsen E (2003), "Simulation of lifting using the better of two worlds: Forward and inverse dynamics", In: IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 4-4 pp.. [PDF, WWW]	methods
2002	Gao F, Damsgaard M, Rasmussen J, Christensen ST (2002), "Calculating Muscle Line-of-action for Musculo-skeletal Modeling", Biol. Cybern., vol. 3 , pp. 199-210.	methods
2002	Rasmussen J, Damsgaard M, Christensen ST, Surma E (2002), "Design optimization with respect to ergonomic properties", Struct. Multidiscip. Optim., vol. 24, pp. 89-97. [DOI, WWW]	methods
2002	Rasmussen J, Vondrak V, Damsgaard M, de Zee M, Christensen ST (2002), "The AnyBody project - Computer analysis of the human body", In: Computer Analysis of the Human Body. Biomechanics of Man, pp. 270-274. [PDF]	methods
2001	Damsgaard M, Christensen ST, Rasmussen J (2001), "An efficient numerical algorithm for solving the muscle recruitment problem in inverse dynamics simulations", In: International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3-3 pp.. [PDF]	methods
2001	Lindsay N (2001), "Modelling of the Shoulder Mechanism. A report describing the development of a three-dimensional biomechanical model of the human shoulder complex", . [PDF]
2001	Rasmussen J, Damsgaard M, Christensen ST (2001), "Simulation of tendon energy storage in pedaling", In: MEDICON 2001, IX Mediterranean Conference on Medical and Biological Engineering and Computing. Pula, Croatia, June 12-15, pp. 4-4 pp.. [PDF]	methods
2001	Rasmussen J, Damsgaard M, Christensen ST (2001), "Optimization of human motion: to invert inverse dynamics", In: International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3-3 pp.. [PDF]	methods
2001	Rasmussen J, Damsgaard M, Voigt M (2001), "Muscle recruitment by the min/max criterion -- a comparative numerical study", J. Biomech., vol. 34, pp. 409-415. [DOI, WWW]	methods
2000	Damsgaard M, Rasmussen J, Christensen ST (2000), "Numerical simulation and justification of antagonists in isometric squatting", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1-1 p.. [PDF]	methods
2000	Damsgaard M, Rasmussen J, Christensen ST (2000), "Bi-articular muscles as optimum force providers", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1-1 p.. [PDF]	methods
2000	Hartung I, Sjöström J (2000), "Optimering av stakning i längdskidåkningens klassiska stil (in Swedish, with English abstract) [Optimization of poling when cross-country skiing, classical style]", Thesis, Mid Sweden University, Sweden. [PDF]	sports
2000	Rasmussen J (2000), "The AnyBody Project - modeling human motion by computer", . [PDF]
2000	Rasmussen J, Damsgaard M, Christensen ST (2000), "Inverse-inverse dynamics simulation of musculo-skeletal systems", In: Prendergast PJ, Lee TC, Carr AJ (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, pp. 1-1 p.. [PDF]	sportsmethods
1999	Rasmussen J, Damsgaard M, Voigt M (1999), "Joint Load Identification during Cyclic Movements", In: IUTAM Symposium on Synthesis in Bio Solid Mechanics, Lyngby, May 24-27, 1998, pp. 428. [WWW]	methods

---

Last update: 2020.10.19