Year 1107 Publications
Keywords
2024
Lund M, Shayestehpour H, (2024), "Enhancing biomechanical spine models with non-linear rhythms". 32nd Annual Meeting of the European Orthopaedic Research Society, [ WWW ]
2024
Shayestehpour H, Shayestehpour MA, Wong C, Bencke J, Rasmussen J, (2024), "Biomechanical analysis of adolescent idiopathic scoliosis: Investigating muscle activation asymmetry during gait using a comprehensive thoracic musculoskeletal model". 32nd Annual Meeting of the European Orthopaedic Research Society, [ WWW ]
2024
Alexander N, Cip J, Brunner RG, De Pieri E, (2024), "Effect of femoral derotational osteotomy in patients with idiopathic increased femoral anteversion on joint loading and muscular demands". J. Child. Orthop., pp. 18632521241269339. [ DOI ]
2024
Bahig OM, (2024), "A Protocol Towards Simulating an Image-Based, Motion-Capture-Driven Personalized Musculoskeletal Knee Model". Book Chapter, In: Tzanetis P, Verdonschot N, Prinsen E, (Ed), [ WWW ]
2024
Gautam K, Hefzy MS, Mustapha AA, Kyle B, (2024), "Comparison of Open Sim and AnyBody modeling system™ predictions in biomechanical modeling of upper extremities". Int. J. Res. Orthop., vol. 10, pp. 717-724. [ DOI ]
2024
Mohammadamin S, (2024), "Development and Validation of a Passive Musculoskeletal Ankle Joint Model Capable of Simulating Fibular Injuries with a Focus on Deltoid Ligament". [ WWW ]
2024
Simonsen MB, Barn R, Wright L, Abbott M, Miller R, Hirata RP, Andersen MS, Woodburn J, (2024), "Experimental tibialis posterior tendon pain effects on ankle kinematics and kinetics". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Simonsen MB, Engelund BK, de Zee M, Rasmussen J, Andersen MS, (2024), "Person-specific scaling of maximal isometric strength based on one-repetition-maximum estimations". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Caimi A, Ferguson SJ, Ignasiak D, (2024), "Effect of altered properties of the l4/l5 intervertebral disc on lumbar spine biomechanics". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Peitola J, Esrafilian A, Simonsen MB, Andersen MS, Korhonen RK, (2024), "Reduced muscle strength can alter the effects of gait modifications on knee cartilage mechanics". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Tzanetis P, Fluit R, de Souza K, Robertson S, Koopman B, Verdonschot N, (2024), "Toward functional reconstruction of the pre-diseased state in robotic-assisted total knee arthroplasty". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Gschoßmann L, Stein L, Dendorfer S, (2024), "Subject specific scaling of muscle strengths in the lower extremity for musculoskeletal models". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Rieger F, Fernandez G, Smit T, Ferguson SJ, Rothenfluh DA, Ignasiak D, (2024), "Towards optimizing personalized targets in spine surgery based on musculoskeletal and statistical shape modeling". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Alexander N, De Pieri E, Cip J, Brunner R, (2024), "Effect of femoral derotational osteotomy in patients with increased femoral anteversion". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
De Pieri E, Hörmann S, Siggelkow E, Bandi M, (2024), "Development and validation of a musculoskeletal modelling framework to predict tka passive mechanics". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Adler I, Förstl N, Suess F, Dendorfer S, (2024), "Biomechanical exposition of the factors influencing the pelvic floor muscle activity". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Förstl N, Adler I, Suess F, Čechová H, Jansová M, Cimrman R, Vychytil J, Dendorfer S, (2024), "Workflow for the development of a non-invasive feedback device to assess pelvic floor contractions". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Daroudi S, Najafabad SN, Mohseni M, Parnianpour M, Arjmand N, (2024), "Vertical ground reaction force and center of pressure prediction during lifting activities using machine learning". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Xu J, Xia P, Xu R, Tang Z, Jin Z, Li J, (2024), "The accuracy of marker-based scaling for biomechanical modelling of the musculoskeletal system". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Tawara D, Soga Y, Komatsu Y, Kawano F, Kobuchi S, (2024), "Musculoskeletal simulation for load assessment of gait on 3d-network-structured fiber material". 29th Congress of the European Society of Biomechanics, [ WWW ]
2024
Li M, Li B, Chen G, Huading B, Shi C, Yu F, (2024), "Biomechanics-based study of muscle activation under different driving conditions for Chinese percentiles". Human Factors and Ergonomics in Manufacturing & Service Industries, vol. n/a, [ DOI ]
2024
Gregory T, Nahavandi D, Mohajer N, (2024), "Virtual Simulation and Analysis of a Neck Support Exoskeleton for Helicopter Pilots". 2024 IEEE 4th International Conference on Human-Machine Systems (ICHMS), pp. 1-6. [ DOI ]
2024
Yang Z, Lu H, Chen M, Guan Q, Liu Q, Guo S, (2024), "Human–robot mechanics model using hip torque identification with a dual-arm nursing-care transfer robot". Int. J. Adv. Rob. Syst., vol. 21, pp. 17298806241249848. [ DOI ]
2024
Menze J, Rojas JT, Ferguson SJ, De Pieri E, Gerber K, Zumstein MA, (2024), "Lower Trapezius and Latissimus Dorsi Transfer relieve Teres Minor Activity into the Physiological Range in Collin D Irreparable Posterosuperior Massive Rotator Cuff Tears: A Biomechanical Analysis". J. Shoulder Elbow Surg., [ DOI, WWW ]
2024
Song M, Li Z, Jiang J, Chen W, Guo S, Zheng H, Niu L, (2024), "Design, Simulation and Kinematic Validation of a Hip Prosthetic Mechanism with a Multimotor Function". J. Bionic Eng., [ DOI ]
2024
Holl M, Tröster M, Rack R, Daub U, Schneider U, Bauernhansl T, Müller G, (2024), "Digitale Arbeitsmodelle und Methoden/Digital work models and methods – Transparency for the use of occupational exoskeletons as an ergonomic measure". wt Werkstattstechnik online, vol. 114, pp. 59-65. [ DOI, WWW ]
2024
Wong C, Shayestehpour H, Koutras C, Dahl B, Otaduy MA, Rasmussen J, Bencke J, (2024), "Using Electric Stimulation of the Spinal Muscles and Electromyography during Motor Tasks for Evaluation of the Role in Development and Progression of Adolescent Idiopathic Scoliosis". J. Clin. Med, [ DOI, WWW ]
2024
Yinghu Peng, Yan Wang, Qida Zhang, Shane Fei Chen, Ming Zhang & Guanglin Li, (2024), "Custom orthotic design by integrating 3D scanning and subject-specific FE modelling workflow". Med. Biol. Eng. Comput., [ DOI ]
2024
Peiffer M, Duquesne K, Delanghe M, Van Oevelen A, De Mits S, Audenaert E, Burssens A, (2024), "Quantifying Walking Speeds in Relation to Ankle Biomechanics on a Real-Time Interactive Gait Platform: A Musculoskeletal Modeling Approach in Healthy Adults". Frontiers in Bioengineering and Biotechnology, vol. 12, [ DOI ]
2024
Ji R, Liu X, Liu Y, Yan B, Yang J, Lee WY, Wang L, Tao C, Kuai S, Fan Y, (2024), "Kinematic difference and asymmetries during level walking in adolescent patients with different types of mild scoliosis". Biomed. Eng. Online, [ DOI ]
2024
Daroudi S, Arjmand N, Mohseni M, El-Rich M, Parnianpour M, (2024), "Evaluation of ground reaction forces and centers of pressure predicted by AnyBody Modeling System during load reaching/handling activities and effects of the prediction errors on model-estimated spinal loads". J. Biomech., pp. 111974. [ DOI, WWW ]
2024
De Pieri E, Egloff C, Mündermann A, Nüesch C, Herger S, Liphardt AM, Chammartin F, (2024), "Load-induced blood marker kinetics in patients with medial knee compartment osteoarthritis are associated with accumulated load and patient reported outcome measures". F1000 Research, vol. 12, pp. 299. [ DOI, WWW ]
2024
Park J, Ye Y, Du J, Srinivasan D, (2024), "Virtual reality simulation of exoskeleton-assistance for manual material handling". IEEE Access, vol. PP, pp. 1-1. [ DOI ]
2024
Prado M, Oyama S, Giambini H, (2024), "Marker-Based Versus IMU-Based Kinematics for Estimates of Lumbar Spine Loads Using a Full-Body Musculoskeletal Model". J. Appl. Biomech., pp. 1-10. [ DOI ]
2024
Oswald A, Menze J, Hess H, Jacxsens M, Rojas JT, Lädermann A, Schär M, Ferguson SJ, Zumstein MA, Gerber K, (2024), "Effect of patient-specific scapular morphology on the glenohumeral joint force and shoulder muscle force equilibrium: a study of rotator cuff tear and osteoarthritis patients". Frontiers in Bioengineering and Biotechnology, vol. 12, [ DOI, WWW ]
2024
Siegel F, Buj C, Merfort R, Hein A, Aschwege F, (2024), "Evaluating the viability of neural networks for analysing electromyography data in home rehabilitation: Estimating foot progression angle". Proceedings of the 17th International Joint Conference on Biomedical Engineering Systems and Technologies, [ DOI ]
2023
Shoulin X, Yafei QU, Jiaxuan REN, Jing Z, Hui LI, Zhenxian C, (2023), "Effect of prosthetic joint line installation height errors on insert wear in unicompartmental knee arthroplasty". Journal of Biomedical Engineering, vol. 40, [ DOI ]
2023
Jafarian M, Hoseini N, Safahieh A, Namnabat MS, Arjmand N, (2023), "Comparison of Different Risk Assessment Tools to Manage Musculoskeletal Disorders Among Workers in an Automobile Manufacturing Company". 2023 30th National and 8th International Iranian Conference on Biomedical Engineering (ICBME), pp. 253-259. [ DOI ]
2023
Musolf BM, Andersen MS, Theodorakos I, (2023), "Towards a laxity protocol for in vivo applications: Preliminary results parameters". 15th Annual DBS Meeting, Danish Society of Biomechanics, [ WWW ]
2023
Zadoń H, Michnik R, Nowakowska-Lipiec K, (2023), "Exploring the impact of body mass change on fatigue and activity of the muscular system during daily routine". Technol. Health Care, pp. 1-12. [ DOI ]
2023
Simonsen EB, Stensvig M, Andersen TB, Andersen MS, (2023), "Propulsive fractions of joint work during maximal sprint running". Sport Sci. Health, [ DOI ]
2023
Auer S, Kubowitsch S, Dendorfer S, (2023), "Kombinierter Einfluss von psychologischen und biomechanischen Faktoren auf die muskulären Belastungen beim Fußballspielen". Die Orthopädie, [ DOI ]
2023
Xu H, Yang H, Shang Y, Zhang Y, Liu Z, Wang Q, Zhang G, (2023), "Optimization of the key position parameters for tractor steering wheel based on a driver’s arm muscle load analysis". Int J Agric & Biol Eng, vol. 16, [ DOI ]
2023
Akisue KURAMOTO MN, (2023), "Postural stabilization effect of neck pillow during short-term rest in sitting position in an office chair with medium-height backrest". Journal of Biomechanical Science and Engineering, [ DOI ]
2023
Esrafilian A, Halonen KS, Dzialo CM, Mannisi M, Mononen ME, Tanska P, Woodburn J, Korhonen RK, Andersen MS, (2023), "Effects of gait modifications on tissue-level knee mechanics in individuals with medial tibiofemoral osteoarthritis: A proof-of-concept study towards personalized interventions". J. Orthop. Res., [ DOI, WWW ]
2023
Villotti, Samuel, Ralfs, Lennart and Weidner, Robert., (2023), "Biomechanische Simulation zur Auslegung von Exoskeletten: Am Beispiel des Einsatzes an industriellen Arbeitsplätzen". Zeitschrift für wirtschaftlichen Fabrikbetrieb, vol. 118, pp. 406-411. [ DOI ]
2023
Çalikuşu İ, Uzunhi̇sarcikli E, Fi̇dan U, (2023), "Modeling and biomechanical analysis of lower extremity exoskeleton". Gazi Üniv. Mühendis.-Mimar. Fak. Derg., [ DOI ]
2023
Wadgure AT, Mishra P, Babu PS, Reddy MV, (2023), "Analysis of hollow aluminum square tube of refitted mattresses using mathematical calculation & computerized 3-dimensional development". Int. J. Interact. Des. Manuf., [ DOI ]
2023
Serbest K, Ozkan MT, Cilli M, (2023), "Estimation of joint torques using an artificial neural network model based on kinematic and anthropometric data". Neural Comput. Appl., [ DOI ]
2023
Gao Y, Epstein S, Inalpolat M, Wu YN, Gu Y, (2023), "Modeling of Interface Loads for EOD Suit Wearers". arXiv [eess.SP], [ WWW ]
2023
Theodorakos I, Wang X, (2023), "Validation of Computationally Estimated Human Body-Seat Contact Forces During Sitting". Book Chapter, In: Scataglini S, Harih G, Saeys W, Truijen S, (Ed), Advances in Digital Human Modeling, pp. 115-124.
2023
Ishii C, Yamada T, (2023), "Evaluation of Endoskeleton-Type Assist Suit “Sustainable” Based on Musculoskeletal Model". [ WWW ]
2023
Hata K, Ishido Y, Fukudome K, Kiyama R, Nishi T, Nakatsuji S, Yone K, (2023), "2 Effect of Alteration in Hip Joint Alignment following Total Hip Arthroplasty on Hip 3 Joint Contact Force during Gait". Acta of Bioengineering and Biomechanics,
2023
Fliri J, Menze J, Zumstein MA, Ferguson SJ, Burger J, Gerber K, (2023), "SENSITIVITY STUDY OF THE HILL MUSCLE MODEL IN A MUSCULOSKELETAL SHOULDER MODEL". 28th Congress of the European Society of Biomechanics, [ DOI ]
2023
Stoltze J, Oliveira AS, Rasmussen J, Andersen MS, (2023), "{Evaluation of an Unloading Concept for Knee Osteoarthritis: A Pilot Study in a Small Patient Group}". J. Biomech. Eng., pp. 1-39. [ DOI ]
2023
Lentz-Nielsen N, Boysen MD, Munk-Hansen M, Laursen AD, Steffensen M, Engelund BK, Iversen K, Larsen RG, de Zee M, (2023), "{Validation of Metabolic Models for Estimation of Energy Expenditure During Isolated Concentric and Eccentric Muscle Contractions}". J. Biomech. Eng., pp. 1-15. [ DOI ]
2023
Funken J, Zedler M, Lüdorff S, Alt T, Heinrich K, Potthast W, (2023), "FORCE PROFILE OF FUNCTIONAL LEG MUSCLE GROUPS IN CURVE SPRINTING – PRELIMINARY RESULTS". 41st International Society of Biomechanics in Sports Conference,,
2023
Tokunaga Y, Kikuchi T, Handa K, Kubo S, (2023), "CAN ALTERING THE SEGMENT OF APPLICATION REDUCE THE RESIDUAL FORCE AND MOMENT?". XIX International Symposium on Computer Simulation in Biomechanics,
2023
Menze J, Croci E, Andersen MS, Hess H, Ferguson SJ, Müller AM, Mündermann A, Gerber K, (2023), "The Influence of Muscular Modeling on Glenohumeral Stability in a Shoulder Model Considering Force Dependent Kinematics". XIX International Symposium on Computer Simulation in Biomechanics,
2023
Theodorakos I, Andersen MS, (2023), "Influence of the Experimental Protocol and the Optimization Method on the Noninvasive Estimation of Knee Ligaments Properties". Book Chapter, In: Scataglini S, Harih G, Saeys W, Truijen S, (Ed), Advances in Digital Human Modeling, pp. 135-144.
2023
Villotti S, Durst L, Weidner R, (2023), "Digital Twin for Evaluating Support Characteristics for Industrial Exoskeletons for Upper Body Activities". Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022, pp. 117-128. [ DOI ]
2023
Hahnemann Y, Götz S, Rasmussen J, (2023), "Implementation of a Pseudo-Rigid-Body-Model in the AnyBody Modeling System representing large defections of a beam". XIX International Symposium on Computer Simulation in Biomechanics,
2023
Song M, Chen W, Guo S, Li Z, Rasmussen J, Bai S, (2023), "Design, Simulation and Kinematic Verification of A Multi-Loop Ankle-foot Prosthetic Mechanism". IEEE Robotics and Automation Letters, pp. 1-8. [ DOI ]
2023
Yang S, Chen A, Jin C, Teng Y, (2023), "THE ROLE OF MUSCLE RELAXATION IN BADMINTON PLAYERS". Rev. Brasil. Med. Esporte, vol. 29, [ DOI ]
2022
Ignasiak D, Behm P, Mannion AF, Galbusera F, Kleinstück F, Fekete TF, Haschtmann D, Jeszenszky D, Zimmermann L, Richner-Wunderlin S, Vila-Casademunt A, Pellisé F, Obeid I, Pizones J, Sánchez Pérez-Grueso FJ, Karaman MI, Alanay A, Yilgor Ç, Ferguson SJ, Loibl M, ESSG European Spine Study Group, (2022), "Association between sagittal alignment and loads at the adjacent segment in the fused spine: a combined clinical and musculoskeletal modeling study of 205 patients with adult spinal deformity". Eur. Spine J., [ DOI, WWW ]
2022
Li J, Zhu Y, Guan T, (2022), "Numerical Simulation Method of Scoliosis Orthosis Considering Muscle Factor". J. Shanghai Jiatong Univ., [ DOI ]
2022
Miura T, Hongo M, Kasukawa Y, Kijima H, Kudo D, Saito K, Kimura R, Iwami T, Miyakoshi N, (2022), "Relationship between Intervertebral Disc Compression Force and Sagittal Spinopelvic Lower Limb Alignment in Elderly Women in Standing Position with Patient-Specific Whole Body Musculoskeletal Model". Int. J. Environ. Res. Public Health, vol. 19, [ DOI, WWW ]
2022
Shengxian Y, Zongxing L, Jing W, Lin G, (2022), "The effect of the 2-UPS/RR ankle rehabilitation robot with coupling biomechanical model on muscle behaviors". Med. Biol. Eng. Comput., [ DOI ]
2022
Auer S, Tröster M, Schiebl J, Iversen K, Chander D, Damsgaard M, Dendorfer S, (2022), "Biomechanical assessment of the design and efficiency of occupational exoskeletons with the AnyBody Modeling System". Zeitschrift für Arbeitswissenschaft, [ DOI ]
2022
Dehghan P, Arjmand N, (2022), "The National Institute for Occupational Safety and Health (NIOSH) Recommended Weight Generates Different Spine Loads in Load-Handling Activity Performed Using Stoop, Semi-squat and Full-Squat Techniques; a Full-Body Musculoskeletal Model Study". Hum. Factors, pp. 187208221141652. [ DOI, WWW ]
2022
Schiebl J, Tröster M, Idoudi W, Gneiting E, Spies L, Maufroy C, Schneider U, Bauernhansl T, (2022), "Model-Based Biomechanical Exoskeleton Concept Optimization for a Representative Lifting Task in Logistics". International Journal of Environmental Research and Public Health, vol. 19, pp. 15533. [ DOI, WWW ]
2022
Ren S, Liu X, Li H, Guo Y, Zhang Y, Liang Z, Zhang S, Huang H, Huang X, Ma Z, Rong Q, Ao Y, (2022), "Identification of Kinetic Abnormalities in Male Patients after Anterior Cruciate Ligament Deficiency Combined with Meniscal Injury: A Musculoskeletal Model Study of Lower Limbs during Jogging". Bioengineering, vol. 9, pp. 716. [ DOI, WWW ]
2022
Böhme M, (2022), "Untersuchungen zur Biomechanik und seniorengerechten Gestaltung von exoskelettalen Bewegungsunterstützungssystemen zur Überwindung von Treppen".
2022
Suwa S, Inoue K, Matsuoka R, (2022), "Analysis Method for Motion Factors Related to Joint Contact Forces at the Knee during Walking Using Grad-CAM". 2022 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference (APSIPA ASC), pp. 1327-1331. [ DOI ]
2022
Karacaoglu B, Sahin AM, Ciklacandir S, Yilmaz M, Mihcin S, (2022), "Development of a Force Sensor for Biomechanical Simulations of a Cycling Activity". 2022 Medical Technologies Congress (TIPTEKNO), pp. 1-4. [ DOI ]
2022
Dasgupta A, Sharma R, Mishra C, Nagaraja VH, (2022), "Machine Learning for Optical Motion Capture-driven Musculoskeletal Modeling from Inertial Motion Capture Data". arXiv [cs.LG], [ WWW ]
2022
Tomasi M, Artoni A, Mattei L, Pucci FD, (2022), "On the estimation of hip joint loads through musculoskeletal modeling". Research Square, [ DOI ]
2022
Seiferheld BE, Frost J, Krog M, Skals S, Andersen MS, (2022), "Biomechanical investigation of a passive upper-extremity exoskeleton for manual material handling – a computational parameter study and modelling approach". International Journal of Human Factors Modelling and Simulation (IJHFMS), vol. 7, [ DOI ]
2022
Fau G, Böcker J, Zange J, Mittag U, Rawer R, Gruber M, Kramer A, Tørholm S, Arnaud R, Cifuentes AF, Rittweger J, (2022), "NEX4EX: Novel Exercise Hardware for Exploration". 16th Symposium on Advanced Space Technologies in Robotics and Automation, [ WWW ]
2022
Yang Y, Qi J, Liu J, Wang Y, Xu L, Zhang Y, Cheng L, (2022), "Effect of seat tilting on biomechanics of L4 in tractor drivers". Comput. Methods Biomech. Biomed. Engin., pp. 1-12. [ DOI ]
2022
Kong YK, Choi KH, Cho MU, Kim SY, Kim MJ, Shim JW, Park SS, Kim KR, Seo MT, Chae HS, Shim HH, (2022), "Ergonomic Assessment of a Lower-Limb Exoskeleton through Electromyography and Anybody Modeling System". International Journal of Environmental Research and Public Health, vol. 19, pp. 8088. [ DOI, WWW ]
2022
Hansen JB, Kristiansen NH, (2022), "A Data-Based Parametric Biomechanical Running Model driven by Pose Estimation – A proof of concept study". Book Chapter, In: Rasmussen J, De Zee M, (Ed),
2022
Xiong B, Yang P, Lin T, Xu J, Xie Y, Guo Y, Liu C, Zhou Q, Lai Q, He W, Wei Q, Zhang Q, (2022), "Changes in hip joint contact stress during a gait cycle based on the individualized modeling method of “gait-musculoskeletal system-finite element”". J. Orthop. Surg. Res., vol. 17, pp. 267. [ DOI, WWW ]
2022
Andersen MS, (2022), "Chapter 33 – Rigid-body and musculoskeletal models". Human Orthopaedic Biomechanics - Fundamentals, Devices and Applications, pp. 659-680.
2022
Kang KT, Koh YG, Park KM, Choi CH, Jung M, Cho H, Kim SH, (2022), "Effects of the Anterolateral Ligament and Anterior Cruciate Ligament on Knee Joint Mechanics: A Biomechanical Study Using Computational Modeling". Orthopaedic Journal of Sports Medicine, vol. 10, pp. 23259671221084970. [ DOI ]
2022
Woiczinski M, Lehner C, Esser T, Kistler M, Azqueta M, Leukert J, Bauer L, Kraft E, (2022), "Influence of Treadmill Design on Gait: Does Treadmill Size Affect Muscle Activation Amplitude? A Musculoskeletal Calculation With Individualized Input Parameters of Gait Analysis". Front. Neurol., vol. 13, pp. 830762. [ DOI, WWW ]
2022
Duquesne K, Pattyn C, Vanderstraeten B, Audenaert EA, (2022), "Handle With Care: The Anterior Hip Capsule Plays a Key Role in Daily Hip Performance". Orthopaedic Journal of Sports Medicine, vol. 10, pp. 23259671221078254. [ DOI ]
2022
Christensen SS, (2022), "User-Centered Modelling and Design of Assistive Exoskeletons". Book Chapter, In: Bai S, (Ed), [ WWW ]
2022
Gong T, Zhao A, Zhou J, Chen Y, Ma H, Wang X, Wang Y, (2022), "A facile inverse dynamics method to study the impacts of fatigue on the lower limb biomechanics". Biotechnol. Genet. Eng. Rev., pp. 1-12. [ DOI ]
2022
Harthikote Nagaraja V, Bergmann J, Andersen MS, Thompson M, (2022), "{Comparison of a Scaled Cadaver-Based Musculoskeletal Model with a Clinical Upper Extremity Model}". J. Biomech. Eng., pp. 1-23. [ DOI ]
2022
Czarnowski J, (2022), "Strength testing based automatic scaling of muscle-tendon parameters for musculoskeletal models – An automated method of scaling subject specific muscle tendon parameters of thigh muscles". Book Chapter, In: Holmberg J, (Ed),
2022
Jaradat M, (2022), "Multi-Scale Vertebral-Kinematics Based Simulation Pipeline of the Human Spine With Application to Spine Tissues Analysis Human Spine With Application to Spine Tissues Analysis".
2022
Lund Ohlsson M, Danvind J, Holmberg LJ, (2022), "Estimation of muscular metabolic power in two different cross-country sit-skiing sledges using inverse-dynamics simulation". Journal of Rehabilitation and Assistive Technologies Engineering, vol. 9, pp. 20556683221131557. [ DOI ]
2022
Sharma R, Dasgupta A, Cheng R, Mishra C, Nagaraja VH, (2022), "Machine Learning for Musculoskeletal Modeling of Upper Extremity". IEEE Sens. J., pp. 1-1. [ DOI ]
2022
Chatterton GJ, Hansen JB, Kristiansen NH, Kunwald NP, Kersting UG, Oliveira AS, (2022), "ASSESSING KINEMATICS AND KINETICS OF HIGH-SPEED RUNNING USING INERTIAL MOTION CAPTURE: A PRELIMINARY ANALYSIS". 40th International Society of Biomechanics in Sports Conference, [ WWW ]
2022
Chander DS, Böhme M, Andersen MS, Rasmussen J, Zentner J, Cavatorta MP, (2022), "A comparison of different methods for modelling the physical human-exoskeleton interface". Computer Methods, Imaging and Visualization in Biomechanics and Biomedical Engineering II, vol. 7, pp. 204. [ DOI ]
2022
Verim Ö, (2022), "Development and investigation of the mechanical behaviour of circular external fixators during the gait cycle". Transactions of Famena XLVI-I, [ DOI ]
2022
De Pieri E, Nüesch C, Pagenstert G, Viehweger E, Egloff C, Mündermann A, (2022), "HIGH TIBIAL OSTEOTOMY NORMALIZES KNEE AMBULATORY LOADS". 27th Congress of the European Society of Biomechanics,
2022
Alexander N, Viehweger E, Cip J, Brunner RG, De Pieri E, (2022), "HIP CONTACT FORCES IN PATIENTS WITH INCREASED FEMORAL ANTETORSION DO NOT DIFFER WITH DIFFERENT GAIT PATTERNS". 27th Congress of the European Society of Biomechanics,
2022
Bauer L, Raicholt E, Woiczinski M, Müller P, Santos I, (2022), "DEVELOPMENT OF A MUSCULOSKELETAL MODEL FOR THE DETERMINATION OF MUSCLE ACTIVITY IN THE HEALTHY SHOULDER". 27th Congress of the European Society of Biomechanics,
2022
Auer S, Reinker L, Süß F, Dendorfer S, (2022), "COMPARING CALCULATED AND MEASURED MUSCLE ACTIVITY OF THIGH MUSCLES IN DYNAMIC MOTION". 27th Congress of the European Society of Biomechanics,
2022
Tzanetis P, de Souza K, Robertson S, Fluit R, Koopman B, Verdonschot N, (2022), "SHOULD ROBOTIC-ASSISTED TKA RECONSTRUCT PREMORBID STAGE? THE EFFECTS OF OSTEOPHYTES ON KNEE FUNCTIONALITY". 27th Congress of the European Society of Biomechanics, [ WWW ]
2022
Menze J, Rojas T, Zumstein MA, Ferguson SJ, Gerber K, (2022), "BIOMECHANICAL EVALUATION OF DIAGNOSTIC TESTS FOR ROTATOR CUFF LESIONS". 27th Congress of the European Society of Biomechanics,
2022
Melzner M, Pfeifer C, Süß F, Dendorfer S, (2022), "MUSCULOSKELETAL ANALYSIS OF ELBOW STABILITY FOR COMMON INJURY PATTERNS". 27th Congress of the European Society of Biomechanics,
2022
Chesnot A, Jensen N, Seiffert M, Hernandez A, Zarea M, (2022), "Gripping in anthropomorphic robotics". THE 10th STUDENT SYMPOSIUM ON MECHANICAL AND MANUFACTURING ENGINEERING, [ WWW ]
2022
Ishii C, Sugiyama R, Yamada T, (2022), "Proposal of guidelines for application of endoskeleton assist suit’sustainable’to transfer assistance in nursing care". International Journal of,
2022
LIU Jinyue, LI Huiyu, JIA Xiaohui, LI Jiarui, (2022), "Dynamic gait recognition method based on human model constraints". Journal of Computer Applications,
2022
Arshad R, Schmidt H, El-Rich M, Moglo K, (2022), "Sensitivity of the Cervical Disc Loads, Translations, Intradiscal Pressure, and Muscle Activity Due to Segmental Mass, Disc Stiffness, and Muscle Strength in an Upright Neutral Posture". Frontiers in Bioengineering and Biotechnology, vol. 10, [ DOI, WWW ]
2022
S. T. Mubarrata SC, (2022), "Convolutional LSTM: A Deep Learning Approach to Predict Shoulder Joint Reaction Forces". Comput. Methods Biomech. Biomed. Engin.,
2022
Matsuo F, Kawakami J, Karasuyama M, Matsuura K, Tagawa Y, (2022), "A simulation approach for mechanical stresses on repaired tendons in patients after rotator cuff tears: A biomechanical study on how to assist in preventing retears". vol. 17,
2022
Oh J, Ripic Z, Signorile JF, Andersen MS, Kuenze C, Letter M, Best TM, Eltoukhy M, (2022), "Monitoring joint mechanics in anterior cruciate ligament reconstruction using depth sensor-driven musculoskeletal modeling and statistical parametric mapping". Med. Eng. Phys., vol. 103, pp. 103796. [ DOI, WWW ]
2021
Lentz-Nielsen N, Boysen MD, Munk Hansen M, Steffensen M, Laursen AD, Keller Engelund B, Iversen K, de Zee M, (2021), "Trend validation of metabolic models against measurements using indirect calorimetry". 13th Annual Meeting of the Danish Society of Biomechanics, [ WWW ]
2021
Schmalz T, Colienne A, Bywater E, Fritzsche L, Gärtner C, Bellmann M, Reimer S, Ernst M, (2021), "A passive back-support exoskeleton for manual materials handling: Reduction of low back loading and metabolic effort during repetitive lifting". IISE Trans Occup Ergon Hum Factors, pp. 1-15. [ DOI, WWW ]
2021
Miura T, Miyakoshi N, Saito K, Kijima H, Iida J, Hatakeyama K, Suzuki K, Komatsu A, Iwami T, Matsunaga T, Shimada Y, (2021), "Association between global sagittal malalignment and increasing hip joint contact force, analyzed by a novel musculoskeletal modeling system". PLoS One, vol. 16, pp. e0259049. [ DOI, WWW ]
2021
Demirel HO, Ahmed S, Duffy VG, (2021), "Digital Human Modeling: A Review and Reappraisal of Origins, Present, and Expected Future Methods for Representing Humans Computationally". International Journal of Human–Computer Interaction, pp. 1-41. [ DOI ]
2021
Askari E, Andersen MS, (2021), "An anatomy-based dynamic model of total knee arthroplasty". Nonlinear Dyn., [ DOI ]
2021
Rasmussen J, Iversen K, Engelund BK, Rasmussen S, (2021), "Biomechanical Evaluation of the Effect of Minimally Invasive Spine Surgery Compared with Traditional Approaches in Lifting Tasks". Frontiers in Bioengineering and Biotechnology, [ DOI ]
2021
Burks G, Lee Y, Kim S, Ye Y, Beiter B, Herron C, Shi Y, Leonessa A, Du J, Srinivasan D, (2021), "A Framework for Virtual Reality-Based Motor Skills Training for the Use of Exoskeletons". Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 65, pp. 277-278. [ DOI ]
2021
Franţ GM, Bărbuceanu RC, Argeşanu V, Petraşcu IM, Borozan IS, (2021), "Contributions to increase the safety of road vehicles by optimizing passive systems using AnyBody software". 2021 IEEE 19th International Symposium on Intelligent Systems and Informatics (SISY), pp. 153-158. [ DOI ]
2021
Ishii C, Takahashi K, (2021), "Evaluation of Lumbar Burdens for Endoskeleton-Type Assist Suit Based on Musculoskeletal Model and Its Improvement of the Utility". 2021 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), pp. 9518-9523. [ DOI ]
2021
Yinghu P, (2021), "BIOMECHANICAL STUDY OF ADULT ACQUIRED FLATFOOT FOR INTERVENTION".
2021
Strzelczak M, (2021), "Development of a shoulder musculoskeletal model to assess the impact of scapular morphology on glenohumeral biomechanics". Book Chapter, In: Hagemeister N, Begon M, Sins L, (Ed),
2021
Welshman ZM, (2021), "A novel analytical pipeline quantifying variance in foot morphology and function using statistical shape modelling and a 26-segment foot model". Book Chapter, In: Anthony Redmond, Dr Claire Brockett, Dr Michael Backhouse, Dr Graham Chapman, (Ed),
2021
Dupré T, (2021), "Groin injuries in soccer".
2021
Fritzsche L, Galibarov P, Gärtner C, Bornmann J, Damsgaard M, Wall R, Schirrmeister B, Gonzalez-Vargas J, Pucci D, Maurice P, (2021), "Assessing the efficiency of exoskeletons in physical strain reduction by biomechanical simulation with AnyBody Modelling System". HAL,
2021
Shayestehpour H, Rasmussen J, Galibarov P, Wong C, (2021), "An articulated spine and ribcage kinematic model for simulation of scoliosis deformities". Multibody Syst. Dyn., [ DOI ]
2021
Skals SL, (2021), "Musculoskeletal modelling of manual material handling in the supermarket sector". Book Chapter, In: Associate Prof. Mark de Zee, Aalborg University, Denmark, (Ed),
2021
Oh J, Kuenze C, Signorile JF, Andersen MS, Letter M, Best TM, Ripic Z, Emerson C, Eltoukhy M, (2021), "Estimation of ground reaction forces during stair climbing in patients with ACL reconstruction using a depth sensor-driven musculoskeletal model". Gait Posture, vol. 84, pp. 232-237. [ DOI, WWW ]
2021
Chander DS, Böhme M, Andersen MS, Rasmussen J, Cavatorta MP, (2021), "Simulating the Dynamics of a Human-Exoskeleton System Using Kinematic Data with Misalignment Between the Human and Exoskeleton Joints". Book Chapter, In: Tavares JM, Bourauel C, Geris L, Vander Slote J, (Ed), Computer Methods, Imaging and Visualization in Biomechanics and Biomedical Engineering II, pp. 65-73. [ DOI ]
2021
Fritzsche L, (2021), "Ergonomie 4.0 – Herausforderungen und Chancen der Industrie 4.0 für die Gestaltung menschengerechter Arbeitsplätze". Interdisziplinäre Wissenschaftliche Konferenz Mittweida, [ DOI ]
2021
Zadoń H, Nowakowska-Lipiec K, Michnik R, Zadoń H, (2021), "A Sitting or Standing Position–Which One Exerts More Loads on the Musculoskeletal System of the Lumbar Spine? Comparative Tests Based on the Methods of Mathematical Modelling". actabio.pwr.wroc.pl, [ WWW ]
2021
Bahramian M, Shayestehpour MA, Yavari M, (2021), "Musculoskeletal injury risk assessment in a car dashboard assembly line using various quantitative and qualitative tools". [ WWW ]
2021
Lee D, Kim P, Lee J, Shin CS, (2021), "Effect of rotator cuff tear patterns on teres minor force during shoulder abduction after reverse total shoulder arthroplasty". The Korean Society of Mechanical Engineers 2021 Conference, pp. 1800-1801.
2021
Junior WA, (2021), "Improving Ergonomics Through Physical Human-Robot Collaboration".
2021
Mohammad Aimaduddin Atiq bin Kamisan, Xian CHEN, Junji OUGI, (2021), "Biomechanical simulation of knee joint by combining multi-body dynamics and finite element analysis". [ WWW ]
2021
Islam F, (2021), "Validation of Shoulder Strain Index".
2021
des Doktorgrades der Humanwissenschaften (Dr. sc DZ, (2021), "The influence of mental stress on the musculoskeletal human back during static posture and trunk motion".
2021
Rydén A, Martinsson A, (2021), "Evaluation of 3D motion capture data from a deep neural network combined with a biomechanical model". [ WWW ]
2021
Chen Z, Fan X, Gao Y, Zhang J, Guo L, Chen S, Jin Z, (2021), "Effect of Rotator Cuff Deficiencies on Muscle Forces and Glenohumeral Contact Force After Anatomic Total Shoulder Arthroplasty Using Musculoskeletal Multibody Dynamics Simulation". Frontiers in Bioengineering and Biotechnology, vol. 9, pp. 579. [ DOI, WWW ]
2021
Takanori CHIHARA, Kohei SEKINE, Takahiro TANAKA, Jiro SAKAMOTO, Kenji KAWANO and Takashi KAWAGOE, (2021), "An experimental and simulation-based evaluation of the effect of seat angle on muscle load for perching". The Japan Society of Mechanical Engineers, vol. advpub, [ DOI ]
2021
Liu YX, Zhang L, Wang R, Smith C, Gutierrez-Farewik EM, (2021), "Weight Distribution of a Knee Exoskeleton Influences Muscle Activities During Movements". IEEE Access, vol. 9, pp. 91614-91624. [ DOI ]
2021
Sylvester AD, Lautzenheiser SG, Kramer PA, (2021), "A review of musculoskeletal modelling of human locomotion". Interface Focus, vol. 11, pp. 20200060. [ DOI ]
2021
Liming S, Hailong S, (2021), "Muscle force response characteristics of the slipping leg after an unexpected slip". Chinese Journal of Tissue Engineering Research, vol. 25, pp. 1184. [ DOI ]
2020
Sohane A, Agarwal R, (2020), "Knee Muscle Force Estimating Model Using Machine Learning Approach". Comput. J., [ DOI ]
2020
Auer S, Kubowitsch S, Süß F, Renkawitz T, Krutsch W, Dendorfer S, (2020), "Mental stress reduces performance and changes musculoskeletal loading in football-related movements". Science and Medicine in Football, pp. 1-7. [ DOI ]
2020
Han KS, Kang SR, Kwon TK, (2020), "ANALYSIS OF MUSCLE STRENGTH EFFECTS ON EXERCISE PERFORMANCE USING DYNAMIC STABILIZATION EXERCISE DEVICE". J. Mech. Med. Biol., pp. 2040004. [ DOI ]
2020
Wu R, Wang J, Chen W, Wang P, (2020), "Design of a transfer robot for the assistance of elderly and disabled". Adv. Robot., pp. 1-11. [ DOI ]
2020
Kurpiers N, McAlpine P, Kersting UG, (2020), "A biomechanical field testing approach in snow sports: Case studies toward a detailed analysis of joint loading". Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120918037. [ DOI ]
2020
Phillips CW, Forrester AI, Hudson DA, Turnock SR, (2020), "Propulsive efficiency of alternative underwater flykick techniques for swimmers". Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337120912610. [ DOI ]
2020
Bassani T, Stucovitz E, Quian Z, Briguglio M, Galbusera F, (2020), "ASSESSMENT OF THE ANYBODY FULL BODY MUSCULOSKELETAL MODEL IN COMPUTING SPINE LOADS AT LUMBAR LEVEL: COMPARISON WITH IN VIVO VALUES OBTAINED DURING EXERCISE TASKS". [ DOI ]
2020
Groß SJ, (2020), "Muscle Fatigue in Musculoskeletal Numerical Models". Book Chapter, In: Dendorfer S, (Ed), [ WWW ]
2020
Koo YJ, Jung Y, Seon JK, Koo S, (2020), "Anatomical ACL Reconstruction can Restore the Natural Knee Kinematics than Isometric ACL Reconstruction During the Stance Phase of Walking". International Journal of Precision Engineering and Manufacturing, [ DOI ]
2020
Seiferheld BE, Frost J, Krog M, Skals S, Andersen MS, (2020), "BIOMECHANICAL INVESTIGATION OF A PASSIVE UPPER EXTREMITY EXOSKELETON FOR MANUAL MATERIAL HANDLING – A COMPUTATIONAL PARAMETER STUDY". 12th Annual Meeting of the Danish Society of Biomechanics.,
2020
Ferle M, (2020), "The soft-tissue restraints of the knee and its balancing capacity in total knee arthroplasty procedures". [ WWW ]
2020
Vychytil J, Havelková L, Čechová H, Zítka T, Melzner M, (2020), "Injury prevention during childbirth: The model of obstetrician". Mathematical Modeling, vol. 4, pp. 125-127.
2020
Shayestehpour H, Shayestehpour MA, Koutras C, Rasmussen J, Wong C, (2020), "Preliminary kinetic validation of a thoracolumbar musculoskeletal model using sensitivity analysis". 12th Annual Meeting of the Danish Society of Biomechanics, [ WWW ]
2020
Sjöberg M, (2020), "Biomechanical analyses of flywheel resistance exercise : From a space- and ground-based perspective". [ WWW ]
2020
Dejtiar DL, Bartsoen L, Wesseling M, Wirix-Speetjens R, Sloten JV, Perez MA, (2020), "Standard Cruciate-Retaining Total Knee Arthroplasty Implants can Reproduce Native Kinematics". Book Chapter, In: F. Rodriguez Y Baena and F. Tatti (eds.), (Ed), CAOS 2020 (EPiC Series in Health Sciences, vol. 4), vol. 4, pp. 61–64.
2020
Liu X, Huang H, Ren S, Ao Y, Rong Q, (2020), "Anterior Cruciate Ligament Injuries Alter the Kinematics and Kinetics of Knees with or Without Meniscal Deficiency". Multibody Dynamics 2019, pp. 11-17. [ DOI ]
2020
Cappetti N, Naddeo A, Soldovieri VM, Vitillo I, Fiorillo I, (2020), "Perceived Comfort and Muscular Activity: A Virtual Assessment of Possible Correlations". Design Tools and Methods in Industrial Engineering, pp. 59-70. [ DOI ]
2020
Mohamaddan S, Rahman A, Jamali A, Hazmi H, Limbai MM, (2020), "Musculoskeletal Simulation and Analysis of Upper Limb Rehabilitation Device". Intelligent Manufacturing and Energy Sustainability, pp. 739-748. [ DOI ]
2020
亚东 陈, (2020), "Biomechanical Analysis of Knee Joint during the Process of Jumping and Landing". MOS, vol. 09, pp. 77-86. [ DOI ]
2020
El-Edrissi O, (2020), "Contribution of an upper body stick-figure model for subject-specific scaling approaches of generic musculoskeletal models in the AnyBody Modelling System". [ DOI ]
2020
Deane NC, (2020), "Pressure Monitoring Based Identification of the EOD Suit: Human Interface Load Distribution and Ergonomics". [ WWW ]
2020
Chander DS, Cavatorta MP, (2020), "Modelling Interaction Forces at a Curved Physical Human-Exoskeleton Interface". Book Chapter, In: Hanson L, Högberg D, Brolin E, (Ed), Advances in Transdisciplinary Engineering series 11, pp. 217-225. [ DOI ]
2020
Peters M, Wischniewski S, (2020), "Evaluation of Physical Workload Using Simulation Versus Motion Capturing Data for Biomechanical Models". Book Chapter, In: Hanson L, Högberg D, Brolin E, (Ed), Advances in Transdisciplinary Engineering series 11, [ DOI ]
2020
Rasmussen J, Lund ME, Waagepetersen RP, (2020), "Data-Based Parametric Biomechanical Models for Cyclic Motions". Book Chapter, In: Hanson L, Högberg D, Brolin E, (Ed), Advances in Transdisciplinary Engineering series 11, pp. 372-379. [ DOI ]
2020
Shigemitsu, R., Sasaki, K., Rasmussen, J., (2020), "Musculoskeletal modeling with jaw motion data from a TMD patient". Book Chapter, In: Hanson L, Högberg D, Brolin E, (Ed), Advances in Transdisciplinary Engineering series 11, pp. 108-114. [ DOI ]
2020
Bardin A, (2020), "Predicting horse limb responses to surface variations with a 3D musculoskeletal model". Book Chapter, In: Colborne B, (Ed),
2019
Kang KT, Koh YG, Park KM, Choi CH, Jung M, Shin J, Kim SH, (2019), "The anterolateral ligament is a secondary stabilizer in the knee joint". Bone Joint Res., vol. 8, pp. 509–517. [ DOI ]
2019
Zhou* J, Wiggermann N, (2019), "Physical Stresses on Caregivers when Pulling Patients Up in Bed: Effect of Repositioning Aids and Patient Weight". Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 63, pp. 1057-1061. [ DOI ]
2019
Simonsen MB, Yurtsever A, Næsborg-Andersen K, Leutscher PDC, Hørslev-Petersen K, Hirata RP, Andersen MS, (2019), "A parametric study of effect of experimental tibialis posterior muscle pain on joint loading and muscle forces-Implications for patients with rheumatoid arthritis?". Gait Posture, vol. 72, pp. 102-108. [ DOI, WWW ]
2019
Nakashima M, Kanie R, Shimana T, Matsuda Y, Kubo Y, (2019), "Development of a comprehensive method for musculoskeletal simulation in swimming using motion capture data". Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, pp. 1754337119838395. [ DOI ]
2019
Yoshito Otake, Yuta Hiasa, Masaki Takao, Nobuhiko Sugano, Yoshinobu Sato, (2019), "Analysis of Large Scale CT Image Database using AI for Understanding of Musculoskeletal Anatomy and Application in Computer Assisted Surgery". Medical Imaging Technology,
2019
Kitagawa K, Nishisako Y, Nagasaki T, Nakano S, Wada C, (2019), "MUSCULOSKELETAL SIMULATION OF THE RELATIONSHIP BETWEEN FOOT POSITION AND STRESS OF THE L4–L5 JOINT IN SUPPORTING STANDING-UP MOTION TO PREVENT LOW BACK PAIN AMONG CAREGIVERS". J. Mech. Med. Biol., vol. 19, pp. 1940016. [ DOI ]
2019
Zadoń H, Michnik R, Nowakowska K, Myśliwiec A, (2019), "Assessment of Loads Exerted on the Lumbar Segment of the Vertebral Column in Everyday-Life Activities – Application of Methods of Mathematical Modelling". Information Technology in Biomedicine, pp. 554-565. [ DOI ]
2019
Sakamoto TC, (2019), "Effect of age-related muscle weakness and height on L5/S1 compression force during manual material handling". Transactions of the JSME (in Japanese), vol. 85, pp. 19-00125-19-00125. [ DOI ]
2019
Rodrigues C, Correia M, Abrantes J, Nadal J, Benedetti M, (2019), "Combined Phase and Magnitude Metric for Validation of Lower Limb Multibody Dynamics Muscle Action with sEMG". World Congress on Medical Physics and Biomedical Engineering 2018, pp. 517-521. [ DOI ]
2019
Hazrati E, Azghani M, (2019), "Saddle place effect on the leg joints range of motion and muscles contraction velocity in ergometer: parametric study". Modares Mechanical Engineering, vol. 18, pp. 91-99. [ WWW ]
2019
Skendraoui N, Bogard F, Murer S, Ahram TZ, Fiok K, Taiar R, (2019), "The Musculoskeletal Contribution in Wheelchair Propulsion Systems: Numerical Analysis". Advances in Ergonomics in Design, pp. 251-260. [ DOI ]
2019
Theodorakos I, Savonnet L, Beurier G, Wang X, (2019), "Can Computationally Predicted Internal Loads Be Used to Assess Sitting Discomfort? Preliminary Results". Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 447-456. [ DOI ]
2019
Spada S, Ghibaudo L, Carnazzo C, Di Pardo M, Chander DS, Gastaldi L, Cavatorta MP, (2019), "Physical and Virtual Assessment of a Passive Exoskeleton". Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018), pp. 247-257. [ DOI ]
2019
Andrzej B, Anna S, Robert M, Miłosz C, Piotr W, Jacek J, (2019), "Analysis of Skeletal Muscle System Loads for the Most Optimal Positions During Lifting in Different Load Distances". Biomechanics in Medicine and Biology, pp. 221-230. [ DOI ]
2019
Higuchi R, Komatsu A, Iida J, Iwami T, Shimada Y, (2019), "Construction and validation under dynamic conditions of a novel thoracolumbar spine model with defined muscle paths using the wrapping method". Journal of Biomechanical Science and Engineering, vol. 14, pp. 18-00432-18-00432. [ DOI ]
2019
Gao Y, Jin ZM, (2019), "Biomechanics and Biotribology of UHMWPE Artificial Hip Joints". Book Chapter, In: Fu J, Jin ZM, Wang JW, (Ed), UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 241-286. [ DOI ]
2019
Chen Z, Zhang J, Zhang X, Jin ZM, (2019), "Biomechanics and Tribology of Artificial Knee Joint". Book Chapter, In: Fu J, Jin ZM, Wang JW, (Ed), UHMWPE Biomaterials for Joint Implants: Structures, Properties and Clinical Performance, pp. 191-239. [ DOI ]
2019
Jiang C, Xiang Z, Zhao Z, Yang Y, (2019), "The Design of an Adjustable Rehabilitation Bed based on Human Biomechanics". Advances in Mechanism and Machine Science, pp. 143-153. [ DOI ]
2019
Dzialo CM, Mannisi M, Halonen KS, de Zee M, Woodburn J, Andersen MS, (2019), "Gait alteration strategies for knee osteoarthritis: a comparison of joint loading via generic and patient-specific musculoskeletal model scaling techniques". International Biomechanics, vol. 6, pp. 54-65. [ DOI, WWW ]
2019
Iida J, Miyakoshi N, Hongo M, Iwami T, Iwami T, Higuchi R, Komatsu A, Matsunaga T, Shimada Y, (2019), "Calculation of Intervertebral Disc Pressure in the Thoracic and Lumbar Spine in Elderly Women with Kyphosis Using a Novel Musculoskeletal Model with Isolated Thoracic Vertebrae and Rib Cage". OJO, vol. 09, pp. 241-253. [ DOI ]
2019
Xunjian F, Zhenxian C, Zhuo C, Zhihui X, Zhongmin J, (2019), "Combined Musculoskeletal Multi-Body Dynamics and Finite Element Investigation for Customized Scapular Locking Plate (in Chinese)". J. Xi'an Jiaotong Univ./Xi'an Jiaotong Daxue Xuebao, vol. 53, pp. 168-176. [ DOI ]
2019
Harthikote Nagaraja V, (2019), "Motion capture and musculoskeletal simulation tools to measure prosthetic arm functionality". [ WWW ]
2018
Kim Y, Jung Y, Choi W, Lee K, Koo S, (2018), "Similarities and differences between musculoskeletal simulations of OpenSim and AnyBody modeling system". J. Mech. Sci. Technol., vol. 32, pp. 6037-6044. [ DOI ]
2018
Marra MA, Strzelczak M, Heesterbeek PJC, van de Groes SAW, Janssen D, Koopman BFJM, Verdonschot N, Wymenga AB, (2018), "Flexing and downsizing the femoral component is not detrimental to patellofemoral biomechanics in posterior-referencing cruciate-retaining total knee arthroplasty". Knee Surg. Sports Traumatol. Arthrosc., vol. 26, pp. 3377-3385. [ DOI, WWW ]
2018
Zoltan FA, Veronica A, Inocenţiu M, Silviu BI, Mikloş KR, Cerasela PD, Stanciu BS, (2018), "Biomechanical Simulation of Different Postures Obtained from Three Sport Branches". 2018 IEEE 16th International Symposium on Intelligent Systems and Informatics (SISY), pp. 000305-000310. [ DOI ]
2018
Alamdari A, Jun S, Ramsey D, Krovi V, (2018), "A REVIEW OF HOME-BASED ROBOTIC REHABILITATION". The Encyclopedia of Medical Robotics, pp. 187-215. [ DOI ]
2018
Leijendekkers RA, Marra MA, Kolk S, van Bon G, Schreurs BW, Weerdesteyn V, Verdonschot N, (2018), "Gait symmetry and hip strength in women with developmental dysplasia following hip arthroplasty compared to healthy subjects: A cross-sectional study". PLoS One, vol. 13, pp. e0193487. [ DOI, WWW ]
2018
Ro J, Kim C, Kim JS, Yoo OS, (2018), "CONTACT MECHANICS AND MUSCLE STABILITY OF TOTAL KNEE ARTHROPLASTY DURING SQUATTING AND WALKING: A SIMULATION STUDY". vol. 99-B, pp. 118-118. [ WWW ]
2018
Karatsidis A, Jung M, Martin Schepers H, Bellusci G, de Zee M, Veltink PH, Andersen MS, (2018), "Predicting kinetics using musculoskeletal modeling and inertial motion capture". arXiv [physics.med-ph], [ WWW ]
2018
Mundt M, Koeppe A, Bamer F, Potthast W, Markert B, (2018), "[No title]". 36th International Conference on Biomechanics in Sports, Auckland, New Zealand, 10-14 September 2018, [ WWW ]
2018
Oefner C, Kruber D, Rickert C, Voigt C, Schoenfelder S, Hierl T, (2018), "Osteosynthese des Unterkiefergelenkhalses – eine vergleichende biomechanische Analyse der Festigkeit von vier Versorgungssystemen". 36. CADFEM ANSYS Simulation Conference, 10-12 Oct. 2018, Leipzig, Germany, [ WWW ]
2018
Gross S, Verkerke GJ, Dendorfer S, (2018), "Combined experimental and numerical approach to investigate changes in muscle recruitment pattern of the back muscles during exhausting exercise". World Congress Biomechanics Dublin, 2018, [ WWW ]
2018
Dzialo CM, (2018), "Personalized musculoskeletal modeling: Bone morphing, knee joint modeling, and applications". Book Chapter, In: Andersen AP, (Ed), [ DOI ]
2018
Fournier B, (2018), "Model and Characterization of a Passive Biomimetic Ankle for Lower Extremity Powered Exoskeleton". Master of Applied Science thesis, Ottawa-Carleton Institute for Biomedical Engineering. University of Ottawa. Ottawa, Ontario, [ DOI ]
2018
Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M, (2018), "Analysis of Forearm Muscle Activity Aiming at Prevention of Refractory Tennis Elbow". M Orthop Musc Syst., vol. 2, pp. 1002.
2018
Sakai R, Ohtaki Y, Sakaguchi N, Takahira N, Kenmoku T, Yoshida K, Ujihira M, (2018), "Tennis Elbow: Comparison of One- Handed Backhand Stroke Form". SM Orthopedics & Muscular System, vol. 2, pp. 1002. [ WWW ]
2018
Kathawala KJ, (2018), "Effects of Slips and Trips on Resultant Lumbar Kinematics, Lumbar Muscle Activity and Low-Back Loads". MSc thesis. Rochester Institute of Technology, pp. 79 pp.. [ WWW ]
2018
Haberer C, David S, Weiss S, Potthast W, Komnik I, Funken J, (2018), "Data from: Compromised knee internal rotation in total knee arthroplasty patients during stair climbing". PLoS ONE, vol. 13, pp. e0205492.. [ DOI ]
2018
Bardin A, Wang J, Rogers CW, Colborne GR, (2018), "A PRELIMINARY ANYBODY MODEL OF THE EQUINE FORELIMB FOR MOTION SIMULATIONS". International Conference on Equine Exercise Physiology (ICEEP) X, Lorne, Australia,
2018
Theodorakos I, Rueterbories J, Lund ME, Eils E, Andersen MS, De Zee M, Kersting UG, (2018), "Effects of a semi-rigid ankle brace on ankle joint loading during landing on inclined surfaces". International Biomechanics, vol. 5, pp. 46-56. [ DOI ]
2018
Andersen MS, (2018), "How sensitive are predicted muscle and knee contact forces to normalization factors and polynomial order in the muscle recruitment criterion formulation?". International Biomechanics, vol. 5, pp. 88-103. [ DOI ]
2018
Stensgaard Stoltze J, Rasmussen J, Skipper Andersen M, (2018), "On the biomechanical relationship between applied hip, knee and ankle joint moments and the internal knee compressive forces". International Biomechanics, vol. 5, pp. 63-74. [ DOI ]
2018
M. Tröster, U. Scheneider, T. Bauernhansl, J. Rasmussen, M.S. Andersen, (2018), "Simulation Framework for Active Upper Limb Exoskeleton". Book Chapter, In: RW, (Ed), Dritte Transdisziplinäre Konferenz "Technisce Unterstützungssysteme, die die Menschen wirklich wollen" 2018, pp. 345-354.
2018
Bitter T, (2018), "A finite element approach for wear prediction at the taper junction in modular total hip arthroplasty".
2017
Oral A, Gönen D, Özcan C, (2017), "Analysis of working postures in the assembly process of wheel hay rake using anybody modelling system". Gazi Üniv. Mühendis.-Mimar. Fak. Derg., vol. 32, [ DOI ]
2017
Kilic H, Ozcan C, Efe H, Kasal A, (2017), "Computer aided ergonomics in furniture design: baby crib case study". The XXVIIITH International conference Research for Furniture Industry, Poznan, Poland, 21-22 September 2017,
2017
Tagawa Y, Yamamoto N, Omoto M, Matsuse H, Shiba N, (2017), "Simulation of oxygen uptake and leg joint reaction force during ergometer exercise under altered gravity". 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 1901-1904. [ WWW ]
2017
Bajelan S, Nagano H, Sparrow T, Begg RK, (2017), "Effects of wide step walking on swing phase hip muscle forces and spatio-temporal gait parameters". 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), Engineering in Medicine, pp. 954-957. [ DOI, WWW ]
2017
Atici H, Gonen D, Oral A, Kaya B, (2017), "Ergonomic Analysis of an Assembly Line Using the AnyBody Modeling System". International Conference of Management and Industrial Engineering, [ WWW ]
2017
Inose H, Mohri S, Arakawa H, Okui M, Koide K, Yamada Y, Kikutani I, Nakamura T, (2017), "Semi-endoskeleton-type waist assist AB-wear suit equipped with compressive force reduction mechanism". 2017 IEEE International Conference on Robotics and Automation (ICRA), pp. 6014-6019. [ DOI ]
2017
LIa L, Xiang Z, LIUa H, Shao Y, Zhang J, (2017), "Design and Simulation of Lower Limb Rehabilitation Robot Based on Human Physiological Characteristics". Transdisciplinary Engineering: a Paradigm Shift: Proceedings of the 24th ISPE Inc. International Conference on Transdisciplinary Engineering, July 10-14 2017, : a Paradigm Shift: …, vol. 5, pp. 428. [ WWW ]
2017
Yin W, Ren S, Huang H, Yu Y, Liang Z, Ao Y, Rong Q, (2017), "Dynamical Characteristics of Anterior Cruciate Ligament Deficiency Combined Meniscus Injury Knees". Book Chapter, In: Fei M, Ma S, Li X, Sun X, Jia L, Su Z, (Ed), Advanced Computational Methods in Life System Modeling and Simulation, vol. 761, pp. 132-139. [ DOI, WWW ]
2017
Reed SA, (2017), "A preliminary musculoskeletal model of the German Shepherd lumbosacral spine: a thesis presented in partial fulfilment of the requirements for the degree of Master of Science in Animal Science at Massey University, Manawatū, New Zealand". [ WWW ]
2017
Noor NS, Ghazalli Z, Rejab MR, Fauzi FA, Mamat R, Kadirgama K, Sani MS, Ahmad Z, Johari NH, (2017), "A Comparison of Muscular Activity Among European, Korea and Malaysian During Seating Using Musculoskeletal Computational Analysis Method". Adv. Sci. Lett., vol. 23, pp. 11471-11474. [ DOI, WWW ]
2017
Ogrodnik J, Piszczatowski S, (2017), "Influence of modified muscle morphology and activity pattern on the results of musculoskeletal system modelling in cerebral palsy patient". Acta Bioeng. Biomech., vol. 19, pp. 63-75. [ WWW ]
2017
Fournier B, Smith AJ, Doumit M, Lemaire ED, (2017), "MODELLING AND SIMULATION OF LOWER EXTREMITY POWERED EXOSKELETON". RESNA 2017 - Rehabilitation Engineering and Assistive Technology Society of North America annual conference, June 26-30, 2017, New Orleans, LA,
2017
Farahmand F, Hosseini SH, Seifi MM, (2017), "Analysis of quadriceps muscles force and activity of a 3-Dimensional musculoskeletal model". Journal of Advanced Sport Technology, vol. 1, pp. 7-15.
2016
Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ, (2016), "Musculoskeletal modeling of human lower limb during normal walking, one-legged forward hopping and side jumping: Comparison of measured EMG and predicted muscle activity patterns". J. Biomech., vol. 49, pp. 3660-3666. [ DOI, WWW ]
2016
Petersen N, Jaekel P, Rosenberger A, Weber T, Scott J, Castrucci F, Lambrecht G, Ploutz-Snyder L, Damann V, Kozlovskaya I, Mester J, (2016), "Exercise in space: the European Space Agency approach to in-flight exercise countermeasures for long-duration missions on ISS". Extreme Physiology & Medicine, vol. 5, pp. 1-13. [ DOI, WWW ]
2016
Guan X, Ji L, Wang R, Huang W, (2016), "Optimization of an unpowered energy-stored exoskeleton for patients with spinal cord injury". 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5030-5033. [ DOI ]
2016
Rodrigues C, Correia M, Nadal JA, Rodrigues M, (2016), "COMPARING MULTIBODY SUBJECT KINEMATICS AND DYNAMICS ON DIFFERENT GAIT MODES". 22nd Congress of the European Society of Biomechanics, [ WWW ]
2016
Camino Willhuber G, Zderic I, Gras F, Wahl D, Sancineto C, Barla J, Windolf M, Richards RG, Gueorguiev B, (2016), "Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study". Int. Orthop., vol. 40, pp. 1537-1543. [ DOI, WWW ]
2016
Lemieux PO, Barré A, Hagemeister N, Aissaoui R, (2016), "Degrees of freedom coupling adapted to the upper limb of a digital human model". 4th International Digital Human Modeling Symposium, 4th International Digital Human Modeling Symposium, At Montreal, Canada, [ WWW ]
2016
Tomaszewski P, Eijkenboom J, Berahmani S, Janssen D, Verdonschot N, (2016), "FINITE ELEMENT ASSESSMENT OF INITIAL STABILITY AND BONE REMODELING OF SHORT HIP STEM". Bone Joint J., vol. 98-B, pp. 78-78. [ WWW ]
2016
Trapanese S, Naddeo A, Cappetti N, (2016), "A Preventive Evaluation of Perceived Postural Comfort in Car-Cockpit Design: Differences between the Postural Approach and the Accurate Muscular Simulation under Different Load Conditions in the Case of Steering-Wheel Usage". SAE Technical Paper Series, vol. 1, [ DOI, WWW ]
2016
Miyoshi T, Asaishi K, Nakamura T, Takagi M, (2016), "Master–Slave-Type Gait Training System for Hip Movement Disorders". Sens. Mater., vol. 28, pp. 295–309.
2016
Carbone V, (2016), "Subject-specific lower extremity modeling. Personalization of musculoskeletal models using medical imaging and functional measurements". [ WWW ]
2016
Sanford B, Williams J, Zucker-Levin A, Mihalko W, (2016), "PEAK HIP, KNEE AND ANKLE JOINT FORCES DURING GAIT AFTER TOTAL KNEE ARTHROPLASTY". Bone Joint J., vol. 98-B, pp. 129-129. [ WWW ]
2016
Ren S, (2016), "Biomechanical effects of cranio-cervical positions on cervical musculoskeletal disorders". [ WWW ]
2016
Mehle K, Eckert AW, Gentzsch D, Schwan S, Ludtka CM, Knoll WD, (2016), "Evaluation of a new PEEK mandibular reconstruction plate design for continuity defect therapy by finite element analysis". International Journal of New Technology and Research, vol. 2, pp. 65-71. [ WWW ]
2016
Muehling M, Weber T, Russ P, Dendorfer S, (2016), "Prediction of ground reaction forces and moments by using gait analysis silhouette tracking method compared to marker tracking and force platform method". White paper - Simi Reality Motion Systems GmbH, [ WWW ]
2016
David S, Peters M, Komnik I, Potthast W, (2016), "Victory or defeat. How movement strategies distinguish fast direction changes from cutting maneuvers with high injury risk". 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan, [ WWW ]
2016
Savonnet L, Duprey S, Wang X, (2016), "Coupling rigid multi-body and deformable finite element human models for assessing seat discomfort". DHM 2016, Montreal, 2016, [ WWW ]
2016
Komnik I, Peters M, Potthast W, (2016), "Lower limb kinematics and kinetics after total knee arthroplasty surgery during running – a case study". 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan, [ WWW ]
2016
Michael David Stokes CU, Authors, (2016), "Design and Initial Verification of a Novel Total Knee Replacement that Incorporates Synthetic Ligaments to Influence Knee Stability". [ WWW ]
2016
Dupré T, Mortensen KR, Lysdal FG, Funken J, Müller R, Braun M, Krahl H, Kersting U, Potthast W, Pforzheim AC, (2016), "Hip Joint Load and Muscle Stress in Soccer Inside Passing". ISBS-Conference Proceedings Archive, 34th International Conference on Biomechanics in Sport, [ WWW ]
2016
Ogrodnik J, Piszczatowski S, Syczewska M, (2016), "The possibility of evaluation of the pathological muscle function using modelling simulation". Current Research in Motor Control, pp. 192-197.
2016
Jianbo X, Suihuai Y, Wen F, (2016), "Inverse dynamics simulation and quantitative evaluation of comfort level for brake operations on workover rig". Robots & Intelligent System (ICRIS), 2016 International Conference on 27-28 August 2016,
2016
Jakobsen L, Ahlers FH, (2016), "Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics". [ WWW ]
2016
Grüneweller N, Raschke M, Zderic I, Windolf M, (2016), "Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a new hemi-pelvis test model". J. Orthop. Res., vol. 35, pp. 1485-1493.
2016
Eddy M, Moore C, Nimbarte A, (2016), "Evaluation of shoulder strain during multi-directional forceful arm exertions". Occup. Ergonomics, vol. 13, pp. 131-138. [ WWW ]
2016
Oosterwaal M, (2016), "The Glasgow-Maastricht foot model: development, repeatability and sources of error of a 26 segment multi-body foot model". [ WWW ]
2016
Upmann A, (2016), "Application of digital human modeling for the ergonomic evaluation of handbrakes in passenger vehicles". [ WWW ]
2015
Efe H, Kasal A, Kiliç H, Ozcan C, (2015), "Effect of the Critical Ergonomics Parameters on Domestic Chairs for Comfort using the Human Based Product Development Software". The XXVIIth International Conference Research for Furniture Industry, [ WWW ]
2015
Koning BH, van der Krogt MM, Baten CT, Koopman BF, (2015), "Driving a musculoskeletal model with inertial and magnetic measurement units". Comput. Methods Biomech. Biomed. Engin., vol. 18, pp. 1003-1013. [ DOI ]
2015
Kersting U, Theodorakos I, Lund ME, Andersen MS, de Zee M, (2015), "Semi-rigid ankle braces and force transfer in the ankle joint when landing on inclined surfaces". Footwear Sci., vol. 7, pp. S19-S21. [ DOI ]
2015
Wunsch T, Alexander N, Kröll J, Schwameder H, (2015), "Effects of a leaf spring structured midsole on lower limb muscle forces in running". Footwear Sci., vol. 7, pp. S153-S155. [ DOI ]
2015
Okamoto Y, Murakami H, Demura S, Kato S, Yoshioka K, Hayashi H, Sakamoto J, Kawahara N, Tsuchiya H, (2015), "The effect of kyphotic deformity because of vertebral fracture: a finite element analysis of a 10° and 20° wedge-shaped vertebral fracture model". Spine J., vol. 15, pp. 713-720. [ DOI, WWW ]
2015
Carbone V, Fluit R, Pellikaan P, van der Krogt MM, Janssen D, Damsgaard M, Vigneron L, Feilkas T, Koopman HF, Verdonschot N, (2015), "TLEM 2.0 – a comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity". J. Biomech., vol. 48, pp. 734-741. [ PDF, DOI, WWW ]
2015
Marra MA, Vanheule V, Fluit R, Koopman BH, Rasmussen J, Verdonschot N, Andersen MS, (2015), "A subject-specific musculoskeletal modeling framework to predict in vivo mechanics of total knee arthroplasty". J. Biomech. Eng., vol. 137, pp. 020904. [ DOI ]
2015
Yang Y, Xu C, Guan XR, Wang YP, (2015), "Numerical Analysis of Comfort of Military Helmets Based on Inverse Dynamics". Acta Armamentarii, vol. 36, pp. 321-326. [ WWW ]
2015
Cutlip K, Nimbarte AD, Chowdhury SK, Jaridi M, (2015), "Evaluation of Shoulder Stability During Forceful Arm Exertions". Industrial and Systems Engineering Review, vol. 3, pp. 49-58. [ WWW ]
2015
Nishiki T, Tawara D, Tsujikami T, Ninomiya S, Okayama H, Morikawa S, Sakamoto J, (2015), "Musculoskeletal simulation for design of supportive underwear for pelvic floor disorder". Proceedings 8th Asian-Pasific Conference on Biomechanics, 16-19 September 2015, Sapporo, Japan, pp. 282. [ WWW ]
2015
Kulcsar RM, Borozan IS, Argesanu V, Maniu I, Jula M, Streian F, Puta T, Nagel A, (2015), "Modeling, simulation and experimental determination of the spine muscle’s activities of the driver". Appl. Mech. Mater., vol. 760, [ WWW ]
2015
Graichen S, (2015), "Biomechanische Betrachtung manueller Montageprozesse – Beitrag zur Bewertung dynamischer Arbeitsformen innerhalb des Greifraums [Biomechanical view on manual assembly processes – Contribution to the evaluation of dynamic work within the space of reach]".
2015
Koblauch H, (2015), "Low back load in airport baggage handlers".
2015
Gammelgaard MS, (2015), "A general marker-less motion capture approach for the Microsoft Kinect Sensor v2 using subject-specific articulated models within an iterative closest point algorithm for improved anatomical accuracy". [ WWW ]
2015
Shin YH, Choi JS, Kang DW, Seo JW, Lee JH, Kim JY, Kim DH, Yang ST, Tack GR, (2015), "A study on human musculoskeletal model for cycle fitting: comparison with EMG". International Journal of Medical, Health, Pharmaceutical and Biomedical Engineering, vol. 9 , [ WWW ]
2015
Funken J, Heinrich B, Heinrich K, Felker K, Fett D, Platen P, Brüggemann GP, (2015), "Estimating lumbar spine loading during volleyball specific movements using 3d modeling". 33rd International Conference on Biomechanics in Sports, Poitiers, France, [ WWW ]
2015
Lund ME, Andersen MS, de Zee M, Rasmussen J, (2015), "Scaling of musculoskeletal models from static and dynamic trials". International Biomechanics, vol. 2, pp. 1-11. [ DOI ]
2015
Boije M, Jönsson M, (2015), "Biomechanical simulations of a flywheel exercise device in microgravity". [ WWW ]
2015
Ali N, (2015), "Predicting risk factors of noncontact anterior cruciate ligament injuries during single-leg landing". [ WWW ]
2015
Mirakhorlo M, Azghani MR, (2015), "Similarity of different lifting techniques in trunk muscular synergies". Acta Bioeng. Biomech., vol. 17, pp. 21-29. [ WWW ]
2015
Li L, Ji Z, Xia Y, Gong R, (2015), "Development and Validation of a Portable Human Body Joint Power Test System". Int. J. Distrib. Sens. Netw., vol. 11, pp. 341072. [ DOI ]
2015
Pieter Oomen, Janneke Annegarn, John Rasumussen, Jessica Rausch, Karl Siebertz, Lex Verdijk, Maarten Drost, Kenneth Meiler, (2015), "Development and validation of a rule-based strength scaling method for musculoskeletal modeling". Int. J. Human Factors Modeling and Simulation, vol. 5, pp. 19-32.
2014
Bonin D, Wischniewski S, Wirsching HJ, Upmann A, Rausch J, Paul G, (2014), "Exchanging data between Digital Human Modelling systems : a review of data formats". 3rd International Digital Human Modeling Symposium, May 20-22 2014, Odaiba, Tokyo, Japan. Symposium Program and Paper Abstracts, 3rd International Digital Human Modeling Symposium, Tokyo, Japan, [ WWW ]
2014
Ignasiak D, Ferguson SJ, (2014), "Simulation of Spinal Loading: Importance of Subject-Specific Posture and Motion Patterns". Global Spine Journal, vol. 4, pp. s-0034-1376548-s-0034-1376548. [ DOI ]
2014
Shingo Sakurai, Kazunori Hase, Ryusuke Arai, Yutaka Muraki, Hidenori Horita, Takeshi Rakumatsu, (2014), "20211 Biomechanical Analysis of Entering and Exiting Motions of Automobile Using a Musculoskeletal Model". The Proceedings of Conference of Kanto Branch, [ DOI ]
2014
Huang N, Yang X, Chen X, (2014), "Modification of Muscle Force Prediction Model Based on Muscle Fatigue Analysis". Space Med. Med. Eng., [ WWW ]
2014
N.Quirk, Baker M, Epari D, (2014), "Force reaction analysis of lower limbs during common netball motions; a musculoskeletal modeling approach". Australian Biomedical Engineering Conference 2014, Canberra, Australia, 20 - 22 August 2014, [ WWW ]
2014
Han KS, Yu CH, Kwon TK, (2014), "Muscle forces and activation patterns in the spine during spine stabilization exercise using a whole body tilt device". International Journal of Precision Engineering and Manufacturing, vol. 15, pp. 2589-2595.
2014
Coombs DJ, Wykosky S, Bushelow M, (2014), "Calcaneal Fixation Plate Test Method Development". SIMULIA Community Conference, May 19-24, 2014, Providence, RI,
2014
Cutlip K, Nimbarte AD, Ning X, Jaridi M, (2014), "A Biomechanical Strain Index to Evaluate Shoulder Stress". Proceedings of the 2014 Industrial and Systems Engineering Research Conference, [ WWW ]
2014
Bosch JB, (2014), "Estudio computacional de los sistemas de fijación interna aplicados a la recuperación de fracturas diafisarias del húmero [Computational study of internal fixation systems applied to recovery of humeral diaphyseal fractures]". [ WWW ]
2014
Stoltze JS, (2014), "Development of a workflow for wear and functional simulation of total knee replacements". [ WWW ]
2014
Rasmussen J, Andersen MS, Al-Munajjed AA, Upmann A, (2014), "H-point simulation in musculoskeletal models of seating". 3rd International Digital Human Modeling Symposium (DHM2014), May 20-22, 2014, Tokyo, Japan, [ WWW ]
2014
Mirakhorlo M, Azghani MR, Kahrizi S, (2014), "Validation of a musculoskeletal model of lifting and its application for biomechanical evaluation of lifting techniques". J. Res. Health Sci., vol. 14, pp. 23-28. [ WWW ]
2014
DŚouza SF, (2014), "Physical efficiency as a function of age: Development of an age scaling model for biomechanical simulation".
2014
Marek C, Siebertz K, (2014), "Ergonomics for Passenger Cars". Encyclopedia of Automotive Engineering, pp. 1-24. [ DOI ]
2014
Sins L, (2014), "Étude expérimentale et numérique dárthroplasties totales anatomiques de lé́paule [Experimental and numerical study of anatomical total joint replacement of the shoulder]". [ WWW ]
2014
Wibawa AD, (2014), "Lower limb musculoskeletal modeling during normal walking, one-legged forward hopping, side jumping and knee flexion: A Validation study of the AnyBody Modeling System for optimizing anterior cruciate ligament reconstruction". [ WWW ]
2014
Alexander N, Schwameder H, (2014), "Analysis of muscle forces during downhill walking". eProceedings of the 32nd Conference of the International Society of Biomechanics in Sport; 2014; Johnson City, TN, pp. 199-202.
2014
Skals S, Rasmussen K, Bendtsen K, Andersen MS, (2014), "Validation of musculoskeletal models driven by dual Microsoft Kinect Sensor data". 13th International Symposium on 3D Analysis of Human Movement, Lausanne, Switzerland, pp. 14-17. [ WWW ]
2014
Rasmussen S, Rasmussen J, (2014), "A Computational Investigation Of Minimal Invasive Spine Surgery". 15th EFORT Congress 2014, 15th EFORT Congress 2014, [ WWW ]
2013
Nimbarte AD, Sivak-Callcott JA, Zreiqat M, Chapman M, (2013), "Neck Postures and Cervical Spine Loading Among Microsurgeons Operating with Loupes and Headlamp". IIE Transactions on Occupational Ergonomics and Human Factors, vol. 1, pp. 215-223. [ DOI ]
2013
Petrella A, Rasmussen J, Al Munajjed A, Damsgaard M, Lund M, Kiis A, (2013), "How Good is Good Enough? Lessons in Musculoskeletal Model Validation With the Anybody Modeling System". ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation, vol. 7 (4) , pp. V001T04A002-V001T04A002. [ DOI, WWW ]
2013
Song WK, Ko BW, Lee J, (2013), "Dynamics analysis of upper-extremity motions of stroke survivors during reaching tasks at different levels". 2013 IEEE RO-MAN, pp. 13-18. [ DOI ]
2013
Yang M, Xu Z, Liu Y, He Y, Xu Y, (2013), "Perceiving and predicting the intended motion with human-machine interaction force for walking assistive exoskeleton robot". 2013 IEEE International Conference on Mechatronics and Automation, pp. 805-810. [ DOI ]
2013
Wibawa AD, Verdonschot N, Halbertsma JP, Burgerhof JG, Diercks RL, Verkerke GJ, (2013), "Lower Limb Musculoskeletal Model Validation during One Legged Forward Hopping and Side Jumping in Healthy Subjects Using EMG". HCI International 2013 - Posters’ Extended Abstracts, vol. 373 , pp. 557-560. [ DOI, WWW ]
2013
Buchner E, (2013), "Analyse der Ergonomie beim Einstieg in ein Fahrzeug – teil 2 [Analysis of ergonomics when entering a vehicle – part 2]".
2013
Doran ER, (2013), "Effects of combining of upper and lower body resistance training on lumbar loading". [ WWW ]
2013
Lemieux PO, (2013), "Analyse numérique des paramètres biomécaniques influencant la fonction de l’épaule atteinte d’arthropathie de rupture de coiffe [Numerical analysis of biomechanical parameters that Influence shoulder function in case of cuff tear arthropathy]".
2013
Haberly GJ, (2013), "Hip Loading During the Squat Exercise".
2013
Jung M, Damsgaard M, Andersen MS, Rasmussen J, (2013), "Integrating Biomechanical Manikins into a CAD Environment". 2nd International Digital Human Modeling Symposium, Michigan Ann Arbor,
2013
Tsuge Y, Ohshima S, (2013), "Musculoskeletal model for exercise skill optimization".
2013
Koblauch H, Bern SH, Brauer C, Mikkelsen S, de Zee M, Thygesen LC, Helweg-Larsen K, Alkjær T, Andersen MS, Simonsen EB, (2013), "Lumbar Load in Common Work Tasks for Airport Baggage Handlers – A 3D Dynamic Analysis". ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil, [ WWW ]
2013
Nolte D, Andersen MS, Rasmussen J, Al-Munajjed A, (2013), "Development of a patient-specific musculoskeletal model of a healthy knee to analyze hard and soft tissue loading". 21st Annual Symposium on Computational Methods in Orthopaedic Biomechanics,
2013
Motomu NAKASHIMA, Takahiro HASEGAWA, Akihiro MATSUDA, Takatsugu SHIMANA, (2013), "3d-cg based musculoskeletal analysis for a swimmer attaching competitive swimwear". [ DOI ]
2013
Vanheule V, Andersen MS, Wirix-Speetjens R, Jonkers I, Victor J, Sloten JV, (2013), "Modeling of Patient-Specific Knee Kinematics and Ligament Behavior Using Force-Dependent Kinematics". ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil, [ WWW ]
2013
Kulcsar RM, Borozan IS, Argesanu V, Madaras L, (2013), "Car Seats Ergonomic Evaluation". Int. J. Eng., [ WWW ]
2013
Andersen MS, Yang J, de Zee M, Zhou L, Bai S, Rasmussen J, (2013), "Full-body musculoskeletal modeling using dual Microsoft Kinect sensors and the Anybody Modeling System". TGCS 2013 Symposium, August 2013 Natal, Brazil, [ WWW ]
2013
Hess S, (2013), "Modelling and analysis of an impulse stimulated human body by a hand-guided power tool". [ WWW ]
2013
Guenzkofer F, Bubb H, Bengler K, (2013), "The validity of maximum force predictions based on single-joint torque measurements". The 2nd International Digital Human Modeling Symposium, Ann Arbor June 11-13, 2013, [ WWW ]
2013
Jung Y, Jung M, Lee K, Koo S, (2013), "Estimating Knee Adduction Moment From Joint Kinematics Using Musculoskeletal Simulation With Conditional Reaction Elements". ORS 2013 Annual Meeting, San Antonio, TX,
2013
Jun SK, Zhou X, Ramsey DK, Krovi VN, (2013), "Kinetostatic Design-Refinement of Articulated Knee Braces". Proceedings of the ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013 August 4-7, 2013, Portland, OR,
2013
Cadova M, (2013), "Use of OpenSim and AnyBody modelling software for dynamic simulation of the human masticatory system". 18th International Symposium on Computational Biomechanics in Ulm CBU 2013,
2013
Jun SK, Zhou X, Ramsey DK, Krovi VN, (2013), "A Comparative Study of Human Motion Capture and Analysis Tools". The 2nd International Digital Human Modeling Symposium, Ann Arbor, MI, [ WWW ]
2013
Han KS, Kim YH, Kim K, (2013), "Alteration of ligament stiffness can change the spine muscle coordination in flexed positions". Han2013-gm, [ WWW ]
2013
Zhou L, Bai S, Andersen MS, Rasmussen J, (2013), "Design and optimization of a spring-loaded cable-driven robotic exoskeleton". Proceedings of the 25th Nordic Seminar on Computational Mechanics, pp. 205-208.
2013
Cronskar M, Backstrom M, (2013), "Modeling of fractured clavicles and reconstruction plates using CAD, finite element analysis and real musculoskeletal forces input". Modelling in Medicine and Biology X, vol. 17, pp. 235. [ WWW ]
2013
Chen S, Andersen MS, Rasmussen J, Tang W, (2013), "The effect of muscle setting on kinetics of upper extremity in a baseball pitching modeling: A case study". ISBS-Conference Proceedings Archive, vol. 1, [ WWW ]
2012
Rashedi E, Jia B, Nussbaum MA, Lockhart TE, (2012), "Investigating the effects of slipping on lumbar muscle activity, kinematics, and kinetics". Proc. Hum. Fact. Ergon. Soc. Annu. Meet., vol. 56, pp. 1201-1205. [ DOI ]
2012
Xiao-hong JI, Jun-bing MA, Ren-cheng WA, Fang PU, Fang SU, (2012), "Effect of helmet mass and mass center on neck muscle strength in military pilots". Journal of Medical Biomechanics, [ WWW ]
2012
Grammatopoulos G, Mellon S, Andersen MS, Pandit H, Gundle R, McLardy-Smith P, Murray D, Gill H, (2012), "Why dont́ all malpositioned resurfaced cups have high wear? – A dynamic, gait lab study". Journal of Bone and Joint Surgery. British Volume. Orthopaedic Proceedings,
2012
Voigt C, Kunze M, Fischer M, Strauss G, Steinke H, Klöhn C, Scholz R, (2012), "Combined Multi-Body and Finite Element Simulation (AnyBody/ANSYS) – Examples of Application and Validation in Biomechanics". ANSYS Conference & 30th.CADFEM Users’ Meeting,
2012
Cho K, Kim Y, Yi D, Jung M, Lee K, (2012), "Analysis and evaluation of a combined human – exoskeleton model under two different constraints condition". Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL,
2012
Witkowski M, Lenar J, Sitnik R, Verdonschot N, (2012), "A virtual reality interface for pre-planning of surgical operations based on a customized model of the patient". Proc. SPIE, vol. 8289, [ WWW ]
2012
D’Souza S, Rasmussen J, Schwirtz A, (2012), "Multiple linear regression to develop strength scaled equations for knee and elbow joints based on age, gender and segment mass". International Journal of Human Factors Modelling and Simulation, vol. 3, pp. 32-47.
2012
Andersen MS, Rasmussen J, Damsgaard M, (2012), "Letter to the Editor". J. Theor. Biol., vol. 298 , pp. 154-155.
2012
Zhou L, Bai S, Rasmussen J, (2012), "Biomechanical modeling of an assistive shoulder orthoses". AAL Forum 2012, 24-27 Sep 2012, Eindhoven, The Netherlands,
2012
Kim T, Lee K, Kwon J, (2012), "Design improvement of the smith machine using simulation on musculoskeletal model". International Journal of CAD/CAM, vol. 12, [ WWW ]
2012
Rasmussen J, Holmberg J, Sørensen K, Kwan MM, Andersen MS, de Zee M, Holmberg LJ, Sørensen K, Kwan MM, Andersen MS, de Zee M, (2012), "Performance optimization by musculoskeletal simulation". Movement & Sport Sciences, Science & Motricite, vol. 1, pp. 73-83. [ DOI ]
2012
Rasmussen J, Boocock M, Paul G, (2012), "Advanced musculoskeletal simulation as an ergonomic design method". A Journal of Prevention, Assessment and Rehabilitation, vol. 41 , pp. 6107-6111. [ DOI ]
2012
Kersting UG, (2012), "Implications of subtalar joint motion for muscle and joint loading during running". Journal of Foot and Ankle Research, vol. 5,
2012
Nakashima M, Maeda S, Miwa T, Ichikawa H, (2012), "Optimizing Simulation of the Arm Stroke in Crawl Swimming Considering Muscle Strength Characteristics of Athlete Swimmers". Journal of Biomechanical Science and Engineering, vol. 7, pp. 102-117. [ DOI ]
2012
Kunze M, Voigt C, Strauss G, Scholz R, Fischer M, (2012), "Comparison of multi-body simulations and EMG measurements on the M. deltoideus acromialis". Cameroon J. Agric. Sci., vol. 1 , [ WWW ]
2012
Ahmed S, Babski-Reeves K, (2012), "Assessment of Upper Extremity Postures in Novice and Expert during Simulated Carpentry Tasks". Human Factors and Ergonomics Society 56th Annual Meeting,
2012
Olesen CG, (2012), "The Influence of Sitting Conditions on Soft Tissue Loads".
2012
Sheen DP, Lee D, Lee S, Sohn R, Ko BW, Song WK, Lee K, (2012), "An Upper Limb Motion Analysis of Stroke Patients in Daily Activities Using a Musculoskeletal Model". Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL,
2012
Koning BH, der Krogt MM, Baten CT, Koopman HF, (2012), "Kinematics of a musculoskeletal model using inertial and magnetic measurement units". 12th International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy, 18th to 20th July 2012, [ WWW ]
2012
Engstler F, (2012), "Perzentilierung maximaler Gelenkmomente des Menschen [Maximum joint moment percentiles for man]". [ WWW ]
2012
Oomen PW, Drost MR, van Rhijn LW, Meijer K, (2012), "Is Strength Scaling Sufficient for the Development of Personalized Multi Body Models?". 20th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, February 3, 2012 University of California Berkeley, Berkeley, California,
2012
Rackl M, (2012), "Patient-Specific Modelling of Fractures of the Lower Jaw with FEA and Musculoskeletal Simulation".
2012
Weber T, Stezowski P, Dullien S, Dendorfer S, (2012), "Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hueft-Totalendoprothese [A biomechanical evaluation of different load scenarios after implantation of a total hip replacement]". 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V. 25. - 27. Juli 2012, Regensburg, Germany,
2012
Mellon S, Andersen MS, Grammatopoulos G, Gill H, (2012), "Mal-positioning alone does not necessarily lead to increased wear in metal-on-metal hip resurfacing". Proceedings of the ORS 2012 annual meeting,
2012
Jung Y, Jung M, Lee K, Koo S, (2012), "Ground Reaction Force Estimation Using Musculoskeletal Simulation". 30th Conference of the International Society of Biomechanics in Sport, ISBS2012, Melbourne, Australia,
2012
Andersen MS, Mellon S, Lund ME, Grammatopoulos G, Gill HS, (2012), "The effect of including accurate pelvis bony landmarks in a nonlinearly scaled musculoskeletal lower extremity model". International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy,
2012
Cao E, Inoue Y, Liu T, Shibata K, (2012), "Muscle Force Analysis of Human Foot Based on Wearable Sensors and EMG Method". EMG Methods for Evaluating Muscle and Nerve Function, [ WWW ]
2012
Cao E, Inoue Y, Liu T, Shibata K, (2012), "Estimation of lower limb muscle forces during human sit-to-stand process with a rehabilitation training system". Proceedings of 2012 IEEE-EMBS International Conference on Biomedical and Health Informatics, Biomedical and Health Informatics (BHI), 2012 IEEE-EMBS International Conference, pp. 1016-1019. [ DOI, WWW ]
2011
Heinen F, Nedergaard NJ, Sloth S, Kersting U, (2011), "The effect of medially and laterally wedged insoles on lateral ankle stability during sidestepping movements". Footwear Sci., vol. 3, pp. S73-S74. [ DOI ]
2011
Kulcsar RM, Argesanu V, Borozan IS, Maniu I, (2011), "The human body behavior under vehicle vibrations". Proceedings of the 13th WSEAS international conference on Automatic control, modelling & simulation, pp. 368-373. [ WWW ]
2011
Schwarze M, Welke B, Seehaus F, Schmalz T, Hurschler C, (2011), "Stress Resultants in Proximal Femur of Transfemural Amputees During Different Cases of Falling: A Multi-Body Simulation". DgfB 2011, pp. 1-1 p..
2011
Schwarze M, Welke B, Seehaus F, Oehler S, Hurscheler C, (2011), "Validation of an inverse dynamic model: Loads at the prosthesis interface of above-knee amputees". Poster presented at the DGfB, 19-21 May 2011, Murnau (Germany),, pp. 1-1 p..
2011
Worsley P, (2011), "Assessment of short-term knee arthroplasty function using clinical measures, motion analysis, and musculoskeletal modelling". [ WWW ]
2011
Kaalund S, Faunø P, Olsen SS, Olesen CG, (2011), "Pain Reduction by Using Insoles when Playing Soccer on Artificial Turf".
2011
Heiner F, Nedergaard NJ, Sloth S, (2011), "Effect of Crank-Axle Height and Crank Arm Length on Grinding Performance – A Computational Model Approach".
2011
Wu JZ, Sinsel E, Gloekler D, Wimer B, Zhao K, An KN, Buczek F, (2011), "Joint loading of the thumb while operating a mechanical pipette – an inverse dynamics approach". ASB, pp. 2-2 pp..
2011
Robie B, Dendorfer S, Rasmussen J, Tørholm S, (2011), "Axial Rotation Requires Greatest Load in Multifidus Muscle – Potential Association with Low Back Pain?". 2011 Annual Meeting of the AANS/CNS Section on Disorders of the Spine and Peripheral Nerves, Phoenix, Arizona,
2011
Ribeiro A, Rasmussen J, Flores P, Silva LF, (2011), "Biomechanical multibody knee model with condyle contact: modeling, simulation and analysis". Book Chapter, In: Roseiro L, Neto A, (Ed), pp. 209.
2011
Galibarov PE, Dendorfer S, Rasmussen J, (2011), "Two Computational Models of the Lumbar Spine: Comparison and Validation". Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA, vol. Marie Curi,
2011
Sabharwal P, (2011), "A combined in-vivo/in-vitro approach to study knee injury mechanism". [ WWW ]
2011
Gadomski BC, Rasmussen J, Galibarov P, Puttlitz CM, (2011), "The effect of coupled motions and lifting tasks on human lumbar nucleus pressures and annulus fibrosis stresses in a muscle-loaded finite element model". International Society for Biomechanics,
2011
Kwan MM, Andersen MS, Cheng CL, Tang WT, Rasmussen J, (2011), "Investigation of high-speed badminton racket kinematics by motion capture". Sports Eng., vol. 13, pp. 57-63.
2011
Rasmussen J, Olesen CG, Lund ME, Andersen MS, Farahani SD, de Zee M, (2011), "Prediction of motion in musculoskeletal models". XIII International Symposium on Computer Simulation in Biomechanics,
2011
Galibarov PE, Dendorfer S, Christensen ST, (2011), "On modelling spine curvature dependent on muscular and external forces in multibody dynamics system". Presented at the International Society of Biomechanics 13th congress, 2011, Brussels, Belgium, pp. 2-2 pp..
2011
Paul G, Lee WC, (2011), "Interfacing Jack and anybody : towards anthropometric musculoskeletal digital human modeling". 1st International Symposium on Digital Human Modelling, pp. 8-8 pp.. [ WWW ]
2011
Hase RU, (2011), "Development of a car-human-musculoskeletal integrated-dynamics model for driving posture assessment". The Proceedings of Mechanical Engineering Congress, Japan,
2011
Olesen CG, Lund ME, Sloth S, Heinen F, Nedergaard NJ, de Zee M, (2011), "Development of a musculoskeletal model for coffee-grinder design purposes". Book Chapter, In: Pedersen KT, Søgaard K, (Ed), 3. årsmøde i Dansk Biomekanisk Selskab, pp. 1-1 p..
2011
Lund ME, de Zee M, Rasmussen J, (2011), "Comparing calculated and measured curves in validation of musculoskeletal models". XIII International Symposium on Computer Simulation in Biomechanics, Leuven, Belgium, pp. 2-2 pp..
2011
Hase ST, (2011), "Development of Synthesizing Dynamics Model for Human Motion and Muscle Activity". The Proceedings of the Transportation and Logistics Conference,
2011
Cao E, Inoue Y, Liu T, Shibata K, (2011), "Estimate Muscle Forces of Ankle Joint with Wearable Sensors". Journal of Biomechanical Science and Engineering, vol. 6, pp. 299-310. [ DOI ]
2011
Moghadamab MN, Aminianb K, Asgharia M, Parnianpour M, (2011), "How well do the muscular synergies extracted via non-negative matrix factorisation explain the variation of torque at shoulder joint?". Comput. Methods Biomech. Biomed. Engin., pp. 1-11. [ DOI ]
2011
Madeleine P, Samani A, de Zee M, Kersting UG, (2011), "Biomechanics of human movement". International Federation for Medical and Biological Engineering Proceedings, vol. 34 , pp. 237-240.
2011
Galibarov PE, Al-Munajjed AA, Dendorfer S, Christensen ST, Rasmussen J, (2011), "The effect of varying the stiffness of spinal fusion devices on the adjacent levels using multibody dynamics simulation". ISTA, 24th annual congress, pp. 2-2 pp..
2011
Grujicic A, LaBerge M, Xie X, Arakere G, Pandurangan B, Grujicic M, Jeray KJ, Tanner SL, (2011), "Computational investigation of the relative efficacies of nail- and plate-type proximal femoral-fracture fixation implants". Multidiscipline Modeling in Materials and Structures, vol. 7, pp. 212-244. [ WWW ]
2011
Rohner C, (2011), "Berechnung der Kniedynamik beim Gehen durch Nutzung von experimentell ermittelter passiver Kniesteifigkeit und simulierten Muskelkräften (In German) [Calculation of knee-dynamics during walking using experimentally determined passive knee stiffness and si".
2011
Andersen MS, Damsgaard M, Rasmussen J, (2011), "Force-dependent kinematics: a new analysis method for non-conforming joints". Presented at the 13th Biennial International Symposium on Computer Simulation in Biomechanics, pp. 2-2 pp..
2011
Voinescu M, Soares D, Castro M, Mendes E, Davidescu A, Machado L, (2011), "A study of moments acting on the tibia during gait in the active elderly population". Portuguese Journal of Sport Sciences, vol. 11 (Suppl., pp. 575-578.
2011
Hopkins AR, Emmenegger D, Stroud L, Schärer C, Lovern B, Holt C, Seebeck J, (2011), "Generation of subject specific shoulder kinematic models from motion capture data and AnyBody simulation". Presented at the International Soc. Biomechanics conference, 2011 Brussels,
2011
Kwan MM, Rasmussen J, (2011), "Linking Badminton Racket Design and Performance through Motion Capture". CAME - Computer Aided Medical Engineering, vol. 1 , pp. 13-19.
2011
Andersen MS, Rasmussen J, (2011), "Total knee replacement musculoskeletal model using a novel simulation method for non-conforming joints". Proceedings of the International Society of Biomechanics Conference,
2011
Juliussen RB, (2011), "Udvikling af computermodel til analyse af roning [Development of computer model for analysis of rowing]".
2011
Rohlmann A, Han KS, Zander T, Taylor WR, (2011), "A validated thoraco-lumbar spine model for prediction of muscle forces". Eurospine,
2011
Jung M, Kim Y, Cho K, Lee K, (2011), "A novel method to predict posture of human model when designing resistance training machines using musculoskeletal analysis". Presented at the American Society of Biomechanics Meeting, Gainesville, FL, pp. 2-2 pp..
2011
Sørensen K, de Zee M, Rasmussen J, (2011), "A biomechanical analysis of clear strokes in badminton executed by youth players of different skill levels". Proceedings of the International Society of Biomechanics Conference 2011 Brussels,
2011
binti Abdul Majid NA, (2011), "Musculoskeletal analysis of driving fatigue: The influence of seat condition".
2011
Toh JJ, Kin L, Xie W, (2011), "Investigation of the Moment of Inertia and the Biomechanical Internal Forces Acting on the Knee During Hiking". Portuguese Journal of Sport Sciences, vol. 11 ,
2011
Farahani SD, de Zee M, Andersen MS, Lund ME, Rasmussen J, (2011), "Prediction of the Movement Patterns for Human Squat Jumping using the Inverse-Inverse Dynamics Technique". XIII International Symposium on Computer Simulation in Biomechanics, [ WWW ]
2011
Lund ME, Andersen MS, de Zee M, Rasmussen J, (2011), "Functional Scaling of Musculoskeletal Models". Presented at the XXIIIrd Congress of the International Society of Biomechanics, ISB 2011, 3-7 July 2011, Brussels, Belgium, pp. 2-2 pp..
2011
Pontonnier C, de Zee M, Samani A, Dumont G, Madeleine P, (2011), "Trend validation of a musculoskeletal model with a workstation design parameter". XIII International Symposium on Computer Simulation in Biomechanics,
2011
Gadomski BC, Rasmussen J, Puttlitz CM, (2011), "Implementation of Physiological Muscle Loading in a Finite Element Model of the Human Lumbar Spine". Transactions of the 57th annual meeting of the Orthopaedic Reasearch Society,
2011
Gadomski BC, Rasmussen J, Puttlitz CM, (2011), "The effect of muscle loading on internal mechanical parameters of the lumbar spine: a finite element study". Proceedings of 2011 ASME Summer Bioengineering Conference, pp. 2-2 pp.. [ WWW ]
2011
Bai S, Rasmussen J, (2011), "Modelling of Physical Human-Robot Interaction for Exoskeleton Designs". ECCOMAS Thematic Conference: Multibody Dynamics 2011, Brussels, Belgium, pp. 6-6 pp..
2011
Zander T, Rohlmann A, Dreischarf M, Han KS, Bergmann G, (2011), "Impact of the Number of Artificial Discs on Spinal Balance". EuroSpine,
2011
Sun Y, Moore C, Nimbarte A, (2011), "Musculoskeletal Loading During Dynamic Two-Wheeled Cart Pushing and Pulling". IIE Annual Conference., [ WWW ]
2011
Rasmussen J, Bichler R, Tørholm S, Renkawitz T, Wirix-Speetjens R, Dendorfer S, (2011), "Subject-specific Musculoskeletal Simulation of Hip Dislocation Risk in Activities of Daily Living". 57th annual meeting of the orthopaedic research Society, vol. Long Beach, [ PDF ]
2010
Ma C, Zhang M, Tan C, Zhang C, Su W, (2010), "Analysis of lower-limb muscle activities during whole body vibration with different standing postures". 2010 3rd International Conference on Biomedical Engineering and Informatics, Proc. Int. Conf. Biomed. Eng. Inform., vol. 5, pp. 1797-1801. [ DOI, WWW ]
2010
Alkjaer T, Wieland MR, Andersen MS, Simonsen EB, Rasmussen J, (2010), "ACL Research Retreat V". J. Athl. Train., vol. 45, pp. 522-541. [ DOI ]
2010
Manders CJ, (2010), "Combined musculoskeletal and finite element modelling of total hip replacement to account for surgical and patient related factors". pp. 238. [ WWW ]
2010
Olesen CG, de Zee M, Rasmussen J, (2010), "Why is the Etiology of Pressure Ulcers Still Unknown?".
2010
Olesen CG, Busscher L, de Zee M, Rasmussen J, (2010), "The significance of passive stiffness to a computational musculo-skeletal spine model of a seated human".
2010
Racine JO, (2010), "Estimation de léffet dúne force virtuelle sur les forces de contact lors de la transition assis-debout (In French) [Estimating the effect of a virtual force contact during the transition seated-upright]". [ WWW ]
2010
Carbes S, Telfer ST, Woodburn J, Oosterwaal M, Rasmussen J, (2010), "A new multisegmental foot model and marker protocol for accurate simulation of the foot biomechanics during walking". ISB 2011 Brussels,
2010
Kersting UG, Gurney JK, Lewis S, Rasmussen J, (2010), "An individualized musculoskeletal model for the analysis of amputee running". Proceedings of the 28th Conference of the International Society of Biomechanics in Sports, ISBS, 19-23 July 2010, Marquette, MI, USA, pp. 142-144.
2010
Rasmussen J, Kwan MM, Andersen MS, de Zee M, (2010), "Analysis of segment energy transfer using musculoskeletal models in a high speed badminton stroke". Book Chapter, In: Middleton J, Evans SL, Holt C, Jacobs C, Atienza C, Walker B, (Ed),
2010
de Zee M, Lund ME, Schwartz C, Olesen CG, Rasmussen J, (2010), "Validation of musculoskeletal models: the importance of trend validations". IUTAM 2010, Leuven, Belgium, pp. 2-2 pp..
2010
Meijer K, Oomen P, Rausch J, Annegarn J, Rasmussen J, Siebertz K, (2010), "A comparison of two different strength scaling methods for multi body modeling". IUTAM 2010, Leuven, Belgium, pp. 2-2 pp..
2010
Rasmussen HY, (2010), "Deformation Analysis of Human Anterior Cruciate Ligament by Musculoskeletal Model". The Proceedings of Conference of Kanto Branch,
2010
Olesen CG, de Zee M, Rasmussen J, (2010), "Using a Computer Model to Bridge Published Experimental Seated Posture Results". Proceedings of the EPUAP 2010 Annual Conference. Birmingham, United Kingdom,
2010
Dendorfer S, Rasmussen J, Christensen ST, Robie B, (2010), "The Effect of Spinal Disc Herniation on Multifidus Muscles". 56th Annual Orthopaedic Research Society Meeting, New Orleans, USA, vol. 56th Annua,
2010
Kurpiers N, (2010), "Dynamics of freestyle skiing: equipment development and implications for injury prevention strategies". [ WWW ]
2010
Xie X, (2010), "Combined musculo-skeletal multi-body dynamics/finite element analysis of several ergonomics and bio-mechanics problems". [ WWW ]
2010
Welke B, Hurschler C, Windhagen H, Calließ T, Schwarze M, Oehler S, Mücke S, Kraft M, Seehaus F, (2010), "Validierung einer muskuloskelettalen Mehrkörpersimulation zur Ermittlung der Belastungen im Bereich der transfemuralen osseofixierten Endo-Exo-Prothese während des Gehens [Validation of a musculoskeletal multi-body simulation to determine the stresses in". BMT 2010, 44. DGBMT Jahrestagung, Rostock, Germany, [ WWW ]
2010
Bastrup J, Andersen AS, Fakhri SF, Rasmussen CE, (2010), "Ryggens biomekanik (in Danish) [The biomechanics of the back]". [ WWW ]
2010
Worsley P, Stokes M, Taylor M, (2010), "Comparison of Osteoarthritic Knee Kinematics and Kinetics with Age Matched Healthy Individuals". J. Biomech., pp. S29-S29. [ WWW ]
2010
Andersen MS, Damsgaard M, MacWilliams B, Rasmussen J, (2010), "A computationally efficient optimisation-based method for parameter identification of kinematically determinate and over-determinate biomechanical systems". Comput. Methods Biomech. Biomed. Engin., vol. 13, pp. 171-183. [ DOI, WWW ]
2010
Agarwal P, Narayanan MS, Lee LF, Mendel F, Krovi VN, (2010), "Simulation-Based Design of Exoskeletons Using Musculoskeletal Analysis". ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 2010, pp. 1357-1364. [ DOI, WWW ]
2010
Si W, Yan ZZ, Li Y, Liu SP, (2010), "The Crouch Start Modeling and Simulation Based on AnyBody Technology". JDCTA: International Journal of Digital Content Technology and its Applications, vol. 4, pp. 8-14. [ WWW ]
2010
Kooi FV, (2010), "MUSCULOSKELETAL ANALYSIS OF LIGHT POSTURAL MOVEMENTS DURING SITTING".
2010
Ting-Liters C, (2010), "Design an elder-friendly vehicle ingress space using musculoskeletal simulation". [ WWW ]
2010
Rasmussen J, Andersen MS, Bichler R, Carbes S, de Zee M, (2010), "Hip Joint Kinematics in Activities of Daily Living". J. Biomech., vol. 43 , pp. 25.
2010
Nucibella E, (2010), "Development of musculoskeletal model for biomechanical analysis of trans-tibial amputee gait".
2010
Weber T, (2010), "Functional outcome of navigated minimally invasive total hip endoprosthesis using muculoskeletal modeling".
2010
Kwan M, (2010), "Designing the World’s Best Badminton Racket".
2010
Worsley P, Taylor M, Stokes M, (2010), "Robustness of optimised motion capture and musculoskeletal modelling of Gait". 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,
2010
Lund ME, Andersen MS, Rasmussen J, (2010), "Patient-specific optimized kinematic models of the leg". Presented at the 2nd Annual Meeting of the Danish Biomechanical Society, Aalborg, Denmark, pp. 1-1 p..
2010
Saraswat P, (2010), "Foot model for clinical application".
2009
Chang CY, Rupp JD, Reed MP, Hughes RE, Schneider LW, (2009), "Predicting the effects of muscle activation on knee, thigh, and hip injuries in frontal crashes using a finite-element model with muscle forces from subject testing and musculoskeletal modeling". Stapp Car Crash J., vol. 53, pp. 291-328. [ WWW ]
2009
Parasuraman S, Yee KC, Oyong A, (2009), "Human upper limb and arm kinematics for robot based rehabilitation". 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Advanced Intelligent Mechatronics, 2009. AIM 2009. IEEE/ASME International Conference, pp. 845-850. [ DOI, WWW ]
2009
Lee LF, Narayanan MS, Kannan S, Mendel F, Krovi VN, (2009), "Case Studies of Musculoskeletal-Simulation-Based Rehabilitation Program Evaluation". IEEE Trans. Rob., vol. 25, pp. 634-638. [ DOI ]
2009
De Zee M, Cattaneo PM, Svensson P, Pedersen TK, Melsen B, Rasmussen J, Dalstra M, (2009), "Prediction of the articular eminence shape in a patient with unilateral hypoplasia of the right mandibular ramus before and after distraction osteogenesis—A simulation study". J. Biomech., vol. 42, pp. 1049-1053. [ DOI, WWW ]
2009
Cassidy K, (2009), "Design and Validation of a Dynamic Knee Injury Simulator".
2009
Chia-Yuan C, (2009), "Prediction of the Effects of Lower-extremity Muscle Forces on Knee, Thigh, and Hip Injuries in Frontal Motor Vehicle Crashes. and Hip Injuries in Frontal Motor Vehicle Crashes". [ WWW ]
2009
Wyss C, (2009), "Muscle Modelling mit AnyBody". ANSYS Conference & 27th.CADFEM Users’ Meeting,
2009
Worsley P, Warner M, Delaney S, Stokes M, Taylor M, (2009), "The application of ultrasound imaging in the musculoskeletal modeling process". 55th Annual Meeting of the Orthopaedic Research Society, February 22-25, 2009, vol. Las Vegas,, pp. 1501.
2009
Zander T, Rohlmann A, Bergmann G, (2009), "How important is the correct placement of artificial discs?". ANSYS Conference & 27th.CADFEM Users’ Meeting,
2009
de Zee M, Mikkelsen P, Wong C, Simonsen EB, Rasmussen J, (2009), "The Influence of the Center of Rotation on Facet Joint Loading and End Plate Loading Investigated with Musculoskeletal Simulation". Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p..
2009
Fukui H, Sakamoto J, Murakami H, Oda J, Tomita K, Higaki H, (2009), "Biomechanical Analysis of Influence of Spinal Fixation on Intervertebral Joint Force by Using Musculoskeletal Model". 13th International Conference on Biomedical Engineering IFMBE Proceedings, vol. 23 , pp. 1712-1715.
2009
Chao M, Ming Z, Chun-lin Z, Zhi-xiang L, Jian-xin Y, (2009), "Analysis of Human Joint Forces in Standing Posture". J. Beijing Inst. Technol. , [ WWW ]
2009
Eltoukhy M, Asfour S, (2009), "Implementation and validation of a detailed three dimensional inverse dynamics lower extremity model for gait analysis applications". Proceedings of the XXIst Annual International Occupational Ergonomics and Safety Conference, Dallas, Texas, pp. 57-62.
2009
Kim SH, Lee K, (2009), "Development of discomfort evaluation method for car ingress motion". Int. J. Automot. Technol. Manage., vol. 10, pp. 619-627. [ DOI ]
2009
de Zee M, Rasmussen J, (2009), "Using musculoskeletal modeling for estimating the most important muscular output: force". 3D Physiological Human Workshop, 3DPH, Zermatt, Switzerland. 29. November - 02. December, pp. 62-70.
2009
Thielen T, Maas S, Zürbes A, Waldmann D, Kelm J, (2009), "Entwicklung einer Hüftinterimsprothese (Spacer) mittels FE-Analyse unter Berücksichtigung der Muskel- und Gelenkkräfte aus AnyBody [Development of a hip interim prosthesis (spacer) using finite element analysis taking into account the muscle and joint for". ANSYS Conference & 27th.CADFEM Users’ Meeting,
2009
Sellgren U, Söderberg A, (2009), "Robust brake feel design". Proc. Nafems World Congress 09, June 16-19, 2009, Crete, Greece, [ WWW ]
2009
Koller T, Brodie M, Litzenberger S, Sabo A, (2009), "Biomechanische Bewegungs- und Belastungsanalyse im modernen Skisport mittels Mehrkörpersimulation in AnyBody". ANSYS Conference & 27th.CADFEM Users’ Meeting,
2009
Manders C, New A, (2009), "Effect of Surgical Approach on Femoral Strain Distribution after Total Hip Replacement". 55th Annual Meeting of the Orthopaedic Research Society,
2009
Rasmussen J, de Zee M, Carbes S, (2009), "Validation of a biomechanical model of the lumbar spine". Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p..
2009
Olesen CG, de Zee M, Rasmussen J, (2009), "Experimental Validation of a Computational Human Seating Model". Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p..
2009
Kersting UG, de Zee M, (2009), "Reflex responses and ankle joint loading during perturbed turning movements". Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1-1 p..
2009
Rasmussen J, de Zee M, Dahl J, Damsgaard M, (2009), "Salient properties of a combined minimum fatigue and quadratic muscle recruitment criterion". Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 13-14.
2009
Siebertz K, Rausch J, (2009), "Computer aided ergonomics case study: Vehicle brake system". Presented at the ANSYS Conference & 27th.CADFEM Users ́Meeting, pp. 12-12 pp..
2009
Rasmussen J, Carbes S, Gomaa ST, (2009), "A computational model of a reverse shoulder joint prosthesis". Presented at the Symposium on Computational Methods in Orthopaedic Biomechanics (Pre-ORS), Las Vegas, 2009, pp. 1-1 p..
2009
Wyss C, Roethlisberger M, Gerber H, (2009), "Intraarticular and muscle force reactions of the leg using different insoles". Proceedings of the ESB 2009 Workshop, June 7-9, 2009, Zürich, Switzerland, pp. 1-1 p..
2009
Andersen MS, (2009), "Kinematically Over-determinate Musculoskeletal Systems". Book Chapter, In: Rasmussen J, (Ed),
2009
Sakamoto J, Fukui H, Minowa T, Murakami H, Kawahara N, Tomita K, (2009), "Mechanical analysis of spine with kyphosis due to compression fracture of osteoporotic vertebra". Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 19-20.
2009
Schwirtz A, Bichler R, Kaiser R, (2009), "Method for biomechanical evaluation of the ingress and egress motion". ANSYS Conference & 27th.CADFEM Users’ Meeting,
2009
Andersen MS, De Zee M, Dendorfer S, MacWilliams B, Rasmussen J, (2009), "Validation of a detailed lower extremity model based on the Klein Horsman data set". XII International Symposium on Computer Simulation in Biomechanics, pp. 27-28.
2009
Olesen CG, Andersen MS, Rathleff MS, De Zee M, Rasmussen J, (2009), "Understanding the biomechanics of medial tibial stress syndrome: a simulation study using a musculoskeletal model". Congress of the International Society of Biomechanics, ISB, pp. 1-1 p.. [ WWW ]
2009
Sakamoto J, Nakada Y, Murakami H, Kawahara N, Oda J, Tomita K, Higaki H, (2009), "Musculoskeletal Analysis of Spine with Kyphosis Due to Compression Fracture of an Osteoporotic Vertebra". Book Chapter, In: Lim CT, Goh JC, (Ed), 13th International Conference on Biomedical Engineering, vol. 23, pp. 1588-1591. [ PDF, DOI, WWW ]
2008
Rasmussen J, (2008), "Prediction of human posture and movement by musculoskeletal optimization – or Can AnyBody do the Limbo?". Poster presented at the ASME 2008 summer bioengineering conference, Marco Island, Florida, June 29-29, pp. 1-1 p..
2008
Fritz NM, (2008), "Musculoskeletal Model, Countermeasure and Bone Analysis for Astronauts". ANSYS Conference & 26th. CADFEM Users’ Meeting,
2008
Motomu NAKASHIMA YM, (2008), "Analyses of Four Swimming Strokes by a Whole Body Musculoskeletal Simulator for Swimming". Biomechanisms,
2008
Siebertz K, Rausch J, (2008), "The AnyBody Car Driver Model, a CAE tool to evaluate comfort". Conference article from FISITA, [ WWW ]
2008
Holmberg LJ, Lund. AM, (2008), "A musculoskeletal full-body simulation of cross-country skiing". Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, vol. 222 , pp. 11-22.
2008
Nolte A, Augat P, Rasmussen J, (2008), "Analysis of the muscle and joint forces in the shoulder joint using the AnyBody simulation model". Poster presented at the ESB2008 conference, Luzern, Switzerland, pp. 1-1 p.. [ WWW ]
2008
Arakilo M, (2008), "Joint forces within the ankle during level walking". ANSYS Conference & 29th.CADFEM Users’ Meeting,
2008
Rose M, (2008), "Biomechanical Analysis of Anterior Cruciate Ligament Injury Mechanisms".
2008
Wu JZ, Chiou SS, Pan CS, (2008), "Analysis of the effects of stilts walking on musculoskeletal loading in low extremities". poster presented at the NACOB2008 conference, Ann Arbor, MI, pp. 1-1 p..
2008
Manders C, New A, Rasmussen. J, (2008), "Validation of musculoskeletal gait simulation for use in investigation of total hip replacement". J. Biomech., vol. S41 , pp. S488-S488.
2008
Simon U, Niemeyer F, Claes L, Wehner T, (2008), "Patient specific fracture healing simulation". ANSYS Conference & 29th.CADFEM Users’ Meeting,
2008
Simon U, Wehner T, Cosgun I, Henzler T, Claes L, Wolfram U, (2008), "Musculoskeletal model for the rat hind limb". ANSYS Conference & 29th.CADFEM Users’ Meeting,
2008
Duffett GA, Badillo H, Carbes S, Kiis A, (2008), "Design and Optimization for Human Well-Being and Overall System Performance". Presented at the modeFrontier User Meeting 2008, 14-15 October 2008, Trieste, Italy, pp. 13-13 pp..
2007
Rasmussen J, Gielo-Perczak K, (2007), "Biomechanical modeling of the shoulder anatomy". Biomechanics in Ergonomics, Second Edition, pp. 395-404. [ DOI ]
2007
Lund AM, Holmberg J, (2007), "Which are the antagonists to the pectoralis major muscle in 4th gear free‐style technique, cross‐country skiing?". Book Chapter, In: Vesa Linnamo PV, Müller E, (Ed), Science and Nordic Skiing, Linnamo, V. , Komi, PV and Müller, E. (Eds. ), pp. 110-118. [ WWW ]
2007
Collet Y, Tétreault P, Rasmussen J, Nuño N, Hagemeister N, (2007), "Computational modeling of a prosthetic shoulder: our experience with the anybody modeling system". Proceedings of the IASTED International Conference on Modelling and Simulation, pp. 624-629. [ WWW ]
2007
Karlsson D, Osvalder AL, Rasmussen J, (2007), "Towards better seating design – a discussion and comparison between office chairs and car seats". Nordic Ergonomics Society Conference 2007, Lysekil, Sweden, pp. 6-6 pp..
2007
Haahr J, (2007), "Planning and conduction of a validation experiment – Simulation of driving situations in a Ford vehicle".
2007
Nolte A, (2007), "Untersuchung der Muskel- und Gelenkkräfte im Schultergelenk mithilfe eines Simulationsmodells der Software AnyBody (In German) [Investigation of the muscle- and joint forces in the shoulder joint using AnyBody software]".
2007
de Zee M, Falla D, Farina D, Rasmussen J, (2007), "Prediction of neuromuscular adaptation of experimentally induced neck pain using a musculoskeletal model". Presented at the 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan, pp. 2-2 pp..
2007
Collet Y, Rasmussen J, Nuño N, Tétrault P, Hagemeister N, (2007), "Computational Modeling of the shoulder and improvement of a new prosthetic design for massive rotator cuff tears: our experience with the AnyBody Modeling System". Proceedings of the 18th IASTED International Conference on Modelling and Simulation - MS 2007. / R. Wamkeue (ed.) IASTED, pp. 624-627. [ WWW ]
2007
Nakashima M, Motegi Y, (2007), "Development of a Full-Body Musculoskeletal Simulator for Swimming". Proceedings of the 2007 International Symposium on Computer Simulation in Biomechanics (ISCSB2007), pp. 59-60.
2007
de Zee M, Falla D, Farina D, Rasmussen J, (2007), "Simulation of pain-induced alterations in cervical motor control". Poster presented at the World Congress on Neck Pain. January 20-22, Los Angeles, California, USA, pp. 1-1 p.. [ WWW ]
2007
Wilssens J, Hagman F, (2007), "From High Speed Plantar Pressure Measurement to Lower Limb Skeletal Motion". 8th Biennial Footwear Biomechanics Symposium, June 27-29, 2007, National Yang Ming University, Taipei, Taiwan, pp. 2-2 pp..
2007
Sullivan SR, Langrana NA, Sisto SA, (2007), "Shoulder mechanics: analytical modeling and validation". Presentation at the American Soc. of Biomechanics Annual Meeting, pp. 2-2 pp..
2007
Rasmussen J, de Zee M, Christensen ST, Damsgaard M, (2007), "Comparison of a musculoskeletal shoulder model with in-vivo joint forces". Presented at the International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p..
2007
Manders C, New A, Rasmussen J, (2007), "Validation of Hip Joint Force Simulation by Gait Analysis". ANSYS Conference & 25th.CADFEM Users’ Meeting,
2007
Renner S, (2007), "Determination of muscle forces acting on the femur and stress analysis".
2007
Rasmussen J, (2007), "AnyBody: CAE for the human body". ANSYS Conference & 25th.CADFEM Users’ Meeting,
2007
Andersen MS, Alkjær T, Rasmussen J, Damsgaard M, (2007), "Marker Position Determination and Kinematic Analysis of a Patient-specific Lunge Model". International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1-1 p..
2007
Lund AM, Holmberg LJ, (2007), "Which are the antagonists to the pectoralis major muscle in 4th gear, freestyle technique, cross-country skiing?". Book Chapter, In: Vesa Linnamo PV, Müller E, (Ed), Science and Nordic Skiing, Linnamo, V. , Komi, PV and Müller, E. (Eds. ), [ WWW ]
2006
Andre A, Carbes S, Ruiz JL, (2006), "Development of a computer model of the thoracic human spine with an aim to investigate loss of stability in scoliosis".
2006
Haahr J, Madsen T, (2006), "Application of a Biomechanical Model for Prediction of Muscle Activity Patterns during Different Arm Cranking Styles".
2006
Andersen MS, Damsgaard M, Rasmussen J, (2006), "Marker-based motion reconstruction of constrained rigid-segment systems". Presented at the 9th International Symposium on the 3-D Analysis of Human Movement, 28-30 June, Valenciennes, France, pp. 4-4 pp..
2006
Annegarn J, (2006), "Scaling in human simulation models. The development of an isometric strength scaling method which needs easy accessible data only".
2006
Lee LF, Krovi VN, (2006), "Musculoskeletal Simulation Based Optimization of Rehabilitation Program". 2006 International Workshop on Virtual Rehabilitation, pp. 36-41. [ DOI ]
2006
Rausch J, Siebertz K, Christensen ST, Rasmussen J, (2006), "Simulation des menschlichen Bewegungsapparates zur Innenraum-gestaltung von Fahrzeugen (in German) [Simulation of the human musculoskeletal system for vehicle interior design]". VDI Bericht, vol. 1967, pp. 1027-1048.
2006
Signore MJ, (2006), "A Screw-Theoretic Framework for Musculoskeletal System Modeling and Analysis".
2006
Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Andersen MS, (2006), "Musculoskeletal simulation of orthopedic surgical procedures". Book Chapter, In: Miller K, Poulikakos D, (Ed), Poster presented at the Workshop Proceedings of Computational Biomechanics for Medicine. MICCAI 2006, Copenhagen, Denmark, pp. 126-138.
2006
de Jong P, de Zee M, Hilbers PA, Savelberg HH, van de Vosse FN, Wagemakers A, Meijer K, (2006), "Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence". Poster presented at the 11th Symposium of the Flemish Society of Kinesiology, Antwerp, Belgium, pp. 1-1 p..
2006
Annegarn J, Rasmussen J, Savelberg HH, Verdijk LB, Meijer K, (2006), "Scaling strength in human simulation models". 11th Symposium of the Flemish Society of Kinesiology, 20th September 2006, University Antwerp, pp. 1-1 p..
2005
Rasmussen J, Damsgaard M, Christensen ST, de Zee M, (2005), "AnyBody – decoding the human musculoskeletal system by computational mechanics". Book Chapter, In: Skallerud B, Andersson HI, (Ed), Konferanse i beregningsorientert mekanikk (computational mechanics). Trondheim, Norway, pp. 43-59.
2005
Rasmussen J, Damsgaard M, Christensen ST, Kiis A, (2005), "Computer-Aided Ergonomics – a new chapter in CAE?". ANSYS Conference & 23rd.CADFEM Users’ Meeting,
2005
Lund M, (2005), "Biomechanical study of cross-country skiing".
2005
Rasmussen J, de Zee M, Damsgaard M, Christensen ST, (2005), "Ergonomic Optimization of a Bicycle Crank Based on Musculoskeletal Modeling". 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp..
2005
Rasmussen J, de Zee M, Damsgaard M, Christensen ST, Marek C, Siebertz K, (2005), "A General Method for Scaling Musculo-Skeletal Models". 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2-2 pp.. [ WWW ]
2005
Konakanchi K, (2005), "Musculo-skeletal Modeling of Smilodon fatalis for virtual functional performance testing".
2005
Rasmussen J, Christensen ST, Damsgaard M, de Zee M, (2005), "Ergonomic optimization of a spring-loaded bicycle crank". 6th World Congress on Structural and Multidisciplinary Optimization. Rio de Janeiro, Brazil, pp. 8-8 pp.. [ WWW ]
2005
Schaerer C, (2005), "Muskuloskeletale Belastung und Beanspruchung des Femurs waehrend des Gangzyklus: Entwicklung und Vergleich unterschiedlicher Belastungsund Materialmodelle".
2004
Eshuis P, (2004), "Knee Modelling".
2004
Gielo-Perczak K, Rasmussen J, Christensen ST, (2004), "An Analysis of Load Transmission Within The Human Body During Pushing and Pulling". Proceedings of the XVIII Conference of the International Society for Occupational Ergonomics and Safety, Houston, TX, CD, Group 10, pp. 4-8. [ WWW ]
2004
Rasmussen J, Søren TC, Damsgaard M, de Zee M, (2004), "The role of mechanics and optimization in ergonomics". 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, July 12-13, 2004, pp. 10-10 pp.. [ WWW ]
2003
Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M, Vondrak V, (2003), "AnyBody – a software system for ergonomic optimization". Fifth World Congress on Structural and Multidisciplinary Optimization, May 19-23, 2003, Lido di Jesolo - Venice, Italy, pp. 6-6 pp.. [ WWW ]
2003
Forster E, (2003), "Predicting muscle forces in the human lower limb during locomotion". [ WWW ]
2003
Holmberg J, Wagenius P, (2003), "A biomechanical model of a double-poling skier". Book Chapter, In: Milburn University of Otago Ped, (Ed), International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., pp. 5-5 pp..
2003
Rasmussen J, Damsgaard M, Surma E, Christensen ST, de Zee M, (2003), "Designing a general software system for musculoskeletal analysis". IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 6-6 pp.. [ WWW ]
2003
Rasmussen J, Dahlquist J, Damsgaard M, de Zee M, Christensen ST, (2003), "Musculoskeletal modeling as an ergonomic design method". International Ergonomics Association XVth Triennial Conference, August 24-29, 2003, Seoul, Korea, pp. 4-4 pp.. [ WWW ]
2003
de Zee M, Andersen TB, Hansen L, Wong C, Rasmussen J, Simonsen E, (2003), "Simulation of lifting using the better of two worlds: Forward and inverse dynamics". IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 4-4 pp.. [ WWW ]
2003
Jun SK, Zhou X, Ramsey DK, Krovi VN, (2003), "A comparative study of human motion capture and computational analysis tools". The 2nd International Digital Human Modeling Symposium, Citeseer, [ WWW ]
2002
Rasmussen J, Vondrak V, Damsgaard M, de Zee M, Christensen ST, (2002), "The AnyBody project – Computer analysis of the human body". Computer Analysis of the Human Body. Biomechanics of Man, pp. 270-274.
2002
Gao F, Damsgaard M, Rasmussen J, Christensen ST, (2002), "Calculating Muscle Line-of-action for Musculo-skeletal Modeling". Biol. Cybern., vol. 3 , pp. 199-210.
2001
Lindsay N, (2001), "Modelling of the Shoulder Mechanism. A report describing the development of a three-dimensional biomechanical model of the human shoulde