Publications
 

2016

* Alexander, N. & Schwameder, H. (2016), "Lower limb joint forces during walking on the level and slopes at different inclinations", Gait & Posture, vol. 45, pp. 137–142. [DOI] [ gait; ]
* Al-Munajjed, A.A., Bischoff, J.E., Dharia, M.A., Telfer, S., Woodburn, J. & Carbe, S. (2016), "Metatarsal loading during gait - a musculoskeletal analysis", J Biomech Eng, vol. 138 (3). [DOI] [ foot; gait; orthopedics; ]
* Ardestani, M. & Moazen, M. (2016), "How human gait responds to muscle impairment in total knee arthroplasty patients: Muscular compensations and articular perturbations", Journal of Biomechanics, vol. 49 (9), pp. 1620-1633. [DOI] [ knee; gait; orthopedics; ]
* Arshad, R., Zander, T., Dreischarf, M. & Schmidt, H. (2016), "Influence of lumbar spine rhythms and intra-abdominal pressure on spinal loads and trunk muscle forces during upper body inclination", Medical Engineering and Physics, vol. 38 (4), pp. 333–338. [DOI] [ spine; validation; ]
* Blab, F., Avci, O., Daub, U. & Schneider, U. (2016), "New approaches for analysis in ergonomics: From paper and pencil methods to biomechanical simulation", Proceedings at 16. Internationales Stuttgarter Symposium, pp. 821-835. [DOI] [ methods; work place ergonomics; ]
* Carbone, V. (2016), "Subject-specific lower extremity modeling. Personalization of musculoskeletal models using medical imaging and functional measurements", Ph.D. Thesis, University of Twente, Enschede, Netherlands. [PDFDOIWWW] [ lower extremity; validation; methods; ]
* Carbone, V., van der Krogt, M., Koopman, H. & Verdonschot, N. (2016), "Sensitivity of subject-specific models to Hill muscle-tendon model parameters in simulations of gait", J Biomech, vol. 49 (9), pp. 1953-1960. [DOI] [ lower extremity; gait; ]
* NEW!!! Chen, Z. & Jin, Z. (2016), "Prediction of in-vivo kinematics and contact track of total knee arthroplasty during walking", Biosurface and Biotribology, vol. 2 (3), pp. 86–94. [DOI] [ knee; gait; orthopedics; ]
* Chen, Z., Zhang, Z., Wang, L., Li, D., Zhang, Y. & Jin, Z. (2016), "Evaluation of a subject-specific musculoskeletal modelling framework for load prediction in total knee arthroplasty", Medical Engineering and Physics, pp. S1350-4533(16)30066-2. [DOI] [ knee; validation; orthopedics; ]
* David, S., Funken, J., Potthast, W. & Blanke, A. (2016), "Musculoskeletal modeling of the dragonfly mandible system as an aid to understanding the role of single muscles in an evolutionary context", Journal of Experimental Biology, vol. 219, pp. 1041-1049. [DOI] [ mandible; animal; ]
* NEW!!! David, S., Funken, J., Potthast, W. & Blanke, A. (2016), "Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects", Journal of the Royal Society Interface, vol. 13 (123). [DOI] [ mandible; animal; ]
* NEW!!! David, S., Peters, M., Komnik, I. & Potthast, W. (2016), "Victory or defeat. How movement strategies distinguish fast direction changes from cutting maneuvers with high injury risk", 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [WWW] [ knee; sports; ]
* Dupré, T., Mortensen, K.R.L., Lysdal, F.G., Funken, J., Müller, R., Braun, M., Krahl, H., Kersting, U. & Potthast, W. (2016), "Hip joint load and muscle stress in soccer inside passing", International Conference on Biomechanics in Sports 2016, At Tsukuba, Japan. [WWW] [ sports; ]
* Eschweiler, J., Stromps, J.-P., Fischer, M., Schick, F., Rath, B., Pallua, N. & Radermacher, K. (2016), "Development of a biomechanical model of the wrist joint for patient-specific model guided surgical therapy planning: Part 1", J Engineering in Medicine, vol. 230 (4), pp. 310–325. [DOI] [ upper extremity; wrist; validation; orthopedics; ]
* Farahani, S.D., Svinin, M.M., Andersen, M.S., de Zee, M. & Rasmussen, J. (2016), "Prediction of closed-chain human arm dynamics in a crank-rotation task", Journal of Biomechanics. [DOIWWW] [ upper extremity; validation; methods; ]
* NEW!!! Garijo, N., Verdonschot, N., Engelborghs, K. & Pérez, M. (2016), "Subject-specific musculoskeletal loading of the tibia: Computational load estimation", Journal of the Mechanical Behavior of Biomedical Materials, vol. 65, pp. 334-343. [DOI] [ lower extremity; gait; methods; FEA; ]
* NEW!!! Grüneweller, N., Raschke, M., Zderic, I. & Windolf, M. (2016), "Biomechanical comparison of augmented versus non-augmented sacroiliac screws in a new hemi-pelvis test model", Journal of Orthopaedic Research. [DOI] [ gait; orthopedics; ]
* NEW!!! Guan, X., Ji, L., Wang, R. & Huang, W. (2016), "Optimization of an unpowered energy-stored exoskeleton for patients with spinal cord injury", 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), pp. 5030 – 5033. [DOI] [ spine; hip rehab; exoskeleton; ]
* Guzik-Kopyto, A., Michnik, R., PiotrWodarski & Chuchnowska, I. (2016), "Determination of loads in the joints of the upper limb during activities of daily living", Information Technologies in Medicine, vol. 472, pp. 99-108. [DOI] [ upper extremity; ]
* Hölscher, T., Weber, T., Lazarev, I., Englert, C. & Dendorfer, S. (2016), "The influence of rotator cuff tears on glenohumeral stability during abduction tasks", Journal of Orthopaedic Research. [DOI] [ upper extremity; shoulder; orthopedics; ]
* NEW!!! Jakobsen, L. & Ahlers, F.H. (2016), "Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics", Master's Thesis, Aalborg University, Denmark. [PDFWWW] [ sports; ]
* NEW!!! Jakobsen, L. & Ahlers, F.H. (2016), "Biomechanical analysis of hand cycling propulsion movement: A musculoskeletal modelling approach", Master's Thesis, Aalborg University, Denmark. [PDFWWW] [ sports; ]
* NEW!!! Jakobsen, L. & Ahlers, F.H. (2016), "Biomechanical analysis of hand cycling propulsion movement. A musculoskeletal modelling approach and Development of a wireless crank moment measurement-system for a handbike: Initial results of propulsion kinetics - worksheets", Master's Thesis, Aalborg University, Denmark. [PDFWWW] [ sports; ]
* Ji, Z., Wang, H., Jiang, G. & Li, L. (2016), "Analysis of muscle activity utilizing bench presses in the AnyBody Simulation Modelling System", Modelling and Simulation in Engineering (3649478), pp. 1-7. [PDFDOI] [ validation; sports; ]
* NEW!!! Jia, B. & Nussbaum, M.A. (2016), "Development and evaluation of an EMG-based model to estimate lumbosacral loads during seated work", International Journal of Industrial Ergonomics, vol. 55, pp. 96–102. [DOI] [ spine; seating; methods; ]
* Jung, Y., Jung, M., Ryu, J., Yoon, S., Park, S.-K. & Koo, S. (2016), "Dynamically adjustable foot-ground contact model to estimate ground reaction force during walking and running", Gait & Posture, vol. 45, pp. 62–68. [DOI] [ gait; methods; ]
* Kim, Y., Ta, D., Jung, M. & Koo, S. (2016), "A musculoskeletal lumbar and thoracic model for calculation of joint kinetics in the spine", Journal of Mechanical Science and Technology, vol. 30 (6), pp. 2891-2897. [WWW] [ spine; methods; ]
* NEW!!! Komnik, I., Peters, M. & Potthast, W. (2016), "Lower limb kinematics and kinetics after total knee arthroplasty surgery during running – a case study", 34th International Conference on Biomechanics in Sports, 18-22 July 2016, Tsukuba, Japan. [PDFWWW] [ knee; orthopedics; sports; ]
* Lemieux, P.-O., Barré, A., Hagemeister, N. & Aissaoui, R. (2016), "Degrees of freedom coupling adapted to the upper limb of a digital human model", 4th International Digital Human Modeling Symposium, At Montreal, Canada. [WWW] [ shoulder; methods; ]
* NEW!!! Lemieux, P.-O., Cresson, T. & Aissaoui, R. (2016), "Simultaneous estimation of the path, magnitude and orientation of the femorotibial contact forces using bone geometry constraints: an exploratory numerical study for the stance phase of gait", Multibody System Dynamics, pp. 1–21. [DOI] [ knee; gait; methods; ]
* Marková, M. & Gallo, L. (2016), "The influence of the human TMJ eminence inclination on predicted masticatory muscle forces", Human Movement Science, pp. 132-140. [DOI] [ mandible; ]
* Mehle, K., Eckert, A.W., Gentzsch, D., Schwan, S., Ludtka, C.M. & Knoll, W.-D. (2016), "Evaluation of a new PEEK mandibular reconstruction plate design for continuity defect therapy by finite element analysis", International Journal of New Technology and Research, vol. 2 (7), pp. 65-71. [PDFWWW] [ mandible; FEA; orthopedics; ]
* Miyoshi, T., Asaishi, K., Nakamura, T. & Takagi, M. (2016), "Master–Slave-Type Gait Training System for Hip Movement Disorders", Sensors and Materials, vol. 28 (4), pp. 295–309. [DOI] [ gait; rehab; exoskeleton; ]
* Muehling, M., Weber, T., Russ, P. & Dendorfer, S. (2016), "Prediction of ground reaction forces and moments by using gait analysis silhouette tracking method compared to marker tracking and force platform method", White paper - Simi Reality Motion Systems GmbH. [PDFWWW] [ gait; methods; ]
* Naddeo, A., Cappetti, N. & Trapanese, S. (2016), "A preventive evaluation of perceived postural comfort in car-cockpit design: Differences between the postural approach and the accurate muscular simulation under different load conditions in the case of steering-wheel usage", SAE Technical Papers, vol. 2016-01-1434, 2016. [DOI] [ upper extremity; seating; methods; automotive; ]
* Nakashima, M., Hosoya, T. & Shimana, T. (2016), "Musculoskeletal simulation of sports motion considering tension distribution in a whole body compression garmen", Procedia Engineering, vol. 147, pp. 252–256. [DOI] [ methods; sports; ]
* NEW!!! Nowakowska, K., Gzik, M., Michnik, R., Mysliwiec, A., Jurkoj, J., Suchon, S. & Burkacki, M. (2016), "The loads acting on lumbar spine during sitting down and standing up", Innovations in Biomedical Engineering, vol. 526, pp. 169-176. [DOI] [ spine; ]
* Oosterwaal, M., Carbes, S., Telfer, S., Woodburn, J., Tørholm, S., Al-Munajjed, A.A., van Rhijn, L. & Meijer, K. (2016), "The Glasgow-Maastricht foot model, evaluation of a 26 segment kinematic model of the foot", Journal of Foot and Ankle Research. [PDFDOIWWW] [ foot; gait; methods; ]
* Putzer, M., Auer, S., Malpica, W., Suess, F. & Dendorfer, S. (2016), "A numerical study to determine the effect of ligament stiffness on kinematics of the lumbar spine during flexion", BMC Musculoskeletal Disorders. [DOI] [ spine; methods; ]
* NEW!!! Renkawitz, T., Weber, T., Dullien, S., Woerner, M., Dendorfer, S., Grifka, J. & Weber, M. (2016), "Leg length and offset differences above 5 mm after total hip arthroplasty are associated with altered gait kinematics", Gait & Posture, vol. 49, pp. 196–201. [ hip gait; orthopedics; ]
* NEW!!! Ruiz, A.L.C., Pontonnier, C., Levy, J. & Dumont, G. (2016), "A synergy-based control solution for overactuated characters: application to throwing", Computer Animation and Virtual Worlds. [WWW] [ upper extremity; methods; ]
* Sanford, B., Williams, J., Zucker-Levin, A. & Mihalko, W. (2016), "Peak hip, knee and ankle joint forces during gait after total knee arthroplasty", The Bone and Joint Journal. [WWW] [ knee; gait; orthopedics; ]
* NEW!!! Savonnet, L., Duprey, S. & Wang, X. (2016), "Coupling rigid multi-body and deformable finite element human models for assessing seat discomfort", DHM 2016, Montreal, 2016. [PDFWWW] [ seating; FEA; automotive; ]
* NEW!!! Sins, L., Tétreault, P., Nuño, N. & Hagemeister, N. (2016), "Effects of prosthetic mismatch and subscapularis tear on glenohumeral contact patterns in total shoulder arthroplasty: a numerical musculoskeletal analysis", Journal of Biomechanical Engineering. [DOI] [ shoulder; orthopedics; ]
* Stambolian, D., Eltoukhy, M. & Asfour, S. (2016), "Development and validation of a three dimensional dynamic biomechanical lifting model for lower back evaluation for careful box placement", International Journal of Industrial Ergonomics, vol. 54, pp. 10-18. [DOI] [ spine; validation; work place ergonomics; ]
* Stokes, M.D. (2016), "Design and initial verification of a novel total knee replacement that incorporates synthetic ligaments to influence knee stability", Master's Thesis, Clemson University, SC, United States. [WWW] [ knee; orthopedics; ]
* Theodorakos, I., Rueterbories, J., Lund, M.E., Andersen, M.S., de Zee, M. & Kersting, U.G. (2016), "Ankle bracing effects on knee and hip mechanics during landing on inclined surfaces", International Biomechanics, vol. 3 (1), pp. 22-32. [DOIWWW] [ hip knee; ankle; methods; rehab; exoskeleton; ]
* Tomaszewski, P., Eijkenboom, J., Berahmani, S., Janssen, D. & Verdonschot, N. (2016), "Finite element assessment of initial stability and bone remodeling of short hip stem", The Bone and Joint Journal. [WWW] [ hip FEA; orthopedics; ]
* NEW!!! Weber, T., Dendorfer, S., Bulstra, S.K., Grifka, J., Verkerke, G.J. & Renkawitz, T. (2016), "Gait six month and one-year after computer assisted Femur First THR vs. conventional THR. Results of a patient- and observer- blinded randomized controlled trial", Gait Posture, vol. 49, pp. 418–425. [DOI] [ hip gait; orthopedics; ]
* NEW!!! Wibawa, A.D., Verdonschot, N., Halbertsma, J.P.K., Burgerhof, J.G.M., Diercks, R.L. & Verkerke, G.J. (2016), "Musculoskeletal modeling of human lower limb during normal walking, one-legged forward hopping and side jumping: Comparison of measured EMG and predicted muscle activity patterns", Journal of Biomechanics, vol. 16, pp. 31056-31059. [DOI] [ lower extremity; validation; ]
* Xu, C., Silder, A., Zhang, J., Hughes, J., Unnikrishnan, G., Reifman, J. & Rakesh, V. (2016), "An integrated musculoskeletal-finite-element model to evaluate effects of load carriage on the tibia during walking", Journal of Biomechanical Engineering. [DOI] [ lower extremity; validation; gait; FEA; ]
* Zander, T., Dreischarf, M. & Schmidt, H. (2016), "Sensitivity analysis of the position of the intervertebral centres of reaction in upright standing – a musculoskeletal model investigation of the lumbar spine", Medical Engineering and Physics, vol. 38 (3), pp. 297–301. [DOI] [ spine; methods; ]

2015

* Ali, N. (2015), "Predicting risk factors of noncontact anterior cruciate ligament injuries during single-leg landing", Ph.D. Thesis, University of Ottawa, Canada. [PDFWWW] [ knee; validation; orthopedics; sports; ]
* Benoit, D., Damsgaard, M. & Andersen, M. (2015), "Surface marker cluster translation, rotation, scaling and deformation: Their contribution to soft tissue artefact and impact on knee joint kinematics", Journal of Biomechanics, vol. 15, pp. 0021-9290. [DOI] [ knee; gait; methods; ]
* Boije, M. & Jönsson, M. (2015), "Biomechanical simulations of a flywheel exercise device in microgravity", Master's Thesis, Karolinska Institutet, Sweden. [PDFWWW] [ sports; aerospace; ]
* Carbone, V., Fluit, R., Pellikaan, P., van der Krogt, M., Janssen, D., Damsgaard, M., Vigneron, L., Feilkas, T., Koopman, H. & Verdonschot, N. (2015), "Tlem 2.0–A comprehensive musculoskeletal geometry dataset for subject-specific modeling of lower extremity", Journal of Biomechanics. [DOIWWW] [ lower extremity; methods; ]
* Chen, Z., Wang, L., Liu, Y., He, J., Lian, Q., Li, D. & Jin, Z. (2015), "Effect of component mal-rotation on knee loading in total knee arthroplasty using multi-body dynamics modeling under a simulated walking gait", Journal of Orthopaedic Research. [DOI] [ knee; gait; orthopedics; ]
* Cronskär, M. (2015), "Strength analysis of clavicle fracture fixation devices and fixation techniques using finite element analysis with musculoskeletal force input", Medical and Biological Engineering and Computing, vol. 53 (8), pp. 759-769. [DOI] [ shoulder; FEA; orthopedics; ]
* Cutlip, K., Nimbarte, A.D., Chowdhury, S.K. & Jaridi, M. (2015), "Evaluation of shoulder stability during forceful arm exertions", Industrial and Systems Engineering Review, vol. 3 (1). [WWW] [ shoulder; work place ergonomics; ]
* Duprey, S., Savonnet, L., Black, N. & Wang, X. (2015), "Muscle force prediction: can we rely on musculoskeletal model estimations? A case study on push force exertions with the upper limb", Computer Methods in Biomechanics and Biomedical Engineering. [DOI] [ upper extremity; validation; work place ergonomics; ]
* Efe, H., Kasal, A., Kiliç, H. & Özcan, C. (2015), "Effect of the critical ergonomics parameters on domestic chairs for comfort using the human based product development software", The XXVIITH International Conference Research for Furniture Industry, 17-18 September 2015 ,Ankara, Turkey. [PDFWWW] [ seating; work place ergonomics; ]
* Farahani, S.D., Andersen, M.S., de Zee, M. & Rasmussen, J. (2015), "Optimization-based dynamic prediction of kinematic and kinetic patterns for a human vertical jump from a squatting position", Multibody System Dynamics, pp. 1-29. [DOI] [ methods; ]
* Farahani, S.D., Andersen, M.S., de Zee, M. & Rasmussen, J. (2015), "Human arm posture prediction in response to isometric endpoint forces", Journal of Biomechanics. [DOI] [ upper extremity; methods; ]
* Farahani, S.D., Bertucci, W., Andersen, M.S., de Zee, M. & Rasmussen, J. (2015), "Prediction of crank torque and pedal angle profiles during pedaling movements by biomechanical optimization", Structural and Multidisciplinary Optimization, vol. 51 (1), pp. 251-266. [DOI] [ validation; methods; sports; ]
* Fu, Y., Li, S., Chen, Q. & Zhou, W. (2015), "Modeling and simulating lifting task of below-knee amputees", Digital Human Modeling. Applications in Health, Safety, Ergonomics and Risk Management: Ergonomics and Health, pp. 134-143. [DOI] [ spine; lower extremity; work place ergonomics; rehab; ]
* Funken, J., Heinrich, B., Heinrich, K., Felker, K., Fett, D., Platen, P. & Brüggemann, G.-P. (2015), "Estimating lumbar spine loading during volleyball specific movements using 3d modeling", 33rd International Conference on Biomechanics in Sports, Poitiers, France. [PDFWWW] [ spine; sports; ]
* Graichen, S. (2015), "Biomechanische Betrachtung manueller Montageprozesse – Beitrag zur Bewertung dynamischer Arbeitsformen innerhalb des Greifraums [Biomechanical view on manual assembly processes - Contribution to the evaluation of dynamic work within the space of reach]", Ph.D. Thesis, Karlsruhe Institute of Technology, Germany. [PDFDOI] [ work place ergonomics; ]
* Han, K.-S., Nam, H.D. & Kim, K. (2015), "Core muscle strengthening effect during spine stabilization exercise", Journal of Electrical Engineering and Technology. [WWW] [ spine; sports; rehab; ]
* Hangalur, G., Brenneman, E., Nicholls, M., Bakker, R., Laing, A. & Chandrashekar, N. (2015), "Can a knee brace reduce the strain in the anterior cruciate ligament? A study using combined in vivo/in vitro method", Prosthetics and Orthotics International. [DOI] [ knee; rehab; exoskeleton; ]
* Ignasiak, D., Dendorfer, S. & Ferguson, S.J. (2015), "Thoracolumbar spine model with articulated ribcage for the prediction of dynamic spinal loading", Journal of Biomechanics, vol. 15. [DOI] [ spine; methods; ]
* Kersting, U., Theodorakos, I., Lund, M.E., Andersen, M.S. & de Zee, M. (2015), "Semi-rigid ankle braces and force transfer in the ankle joint when landing on inclined surfaces", Footwear Science, vol. 7 (1), pp. 19-21. [DOI] [ lower extremity; ankle; sports; rehab; exoskeleton; ]
* Koblauch, H. (2015), "Low back load in airport baggage handlers", Ph.D. Thesis, University of Copenhagen, Denmark. [PDF] [ spine; validation; work place ergonomics; ]
* Kolk, S., Fluit, R., Luijten, J., Heesterbeek, P.J., Geurts, A.C., Verdonschot, N. & Weerdesteyn, V. (2015), "Gait and lower limb muscle strength in women after triple innominate osteotomy", BMC Musculoskeletal Disorders, vol. 16 (1), pp. 16:68. [DOIWWW] [ lower extremity; gait; orthopedics; ]
* Li, J., McWilliams, A.B., Jin, Z., Fisher, J., Stone, M.H., Redmond, A.C. & Stewart, T.D. (2015), "Unilateral total hip replacement patients with symptomatic leg length inequality have abnormal hip biomechanics during walking", Clinical Biomechanics. [DOI] [ hip gait; orthopedics; ]
* Li, W., Zhang, M., Lv, G., Han, Q., Gao, Y., Wang, Y., Tan, Q., Zhang, M., Zhang, Y. & Li, Z. (2015), "Biomechanical response of the musculoskeletal system to whole body vibration using a seated driver model", International Journal of Industrial Ergonomics, vol. 45, pp. 91–97. [DOI] [ seating; automotive; ]
* Lindenroth, L., Caplan, N., Debuse, D., Salomoni, S.E., Evetts, S. & Weber, T. (2015), "A novel approach to activate deep spinal muscles in space – results of a biomechanical model", Acta Astronautica, vol. 116, pp. 202-210. [DOI] [ spine; validation; aerospace; ]
* NEW!!! Lindenroth, L., Caplan, N., Debuse, D., Salomoni, S.E., Evetts, S. & Weber, T. (2015), "A novel approach to activate deep spinal muscles in space. Results of a biomechanical model", Acta Astronautica, vol. 116, pp. 202–210. [DOI] [ spine; validation; aerospace; ]
* Lund, M.E., Andersen, M.S., de Zee, M. & Rasmussen, J. (2015), "Scaling of musculoskeletal models from static and dynamic trials", International Biomechanics, vol. 2 (1), pp. 1-11. [DOI] [ validation; methods; ]
* Mabuma, J., Schwarze, M., Hurschler, C., Markert, B. & Ehlers, W. (2015), "Effects of osteoarthritis and pathological walking on contact stresses in femoral cartilage", Biomech Model Mechanobiol, pp. 1617-7959. [DOI] [ knee; gait; orthopedics; ]
* Marra, M., Vanheule, V., Fluit, R., Koopman, B.H., Rasmussen, J., Verdonschot, N. & Andersen, M.S. (2015), "A subject-specific musculoskeletal modeling framework to predict in vivo mechanics of total knee arthroplasty", Journal of Biomechanical Engineering, vol. 137. [DOI] [ knee; gait; orthopedics; ]
* Mellon, S.J., Grammatopoulos, G., Andersen, M.S., Pandit, H.G., Gill, H.S. & Murray, D.W. (2015), "Optimal acetabular component orientation estimated using edge-loading and impingement risk in patients with metal-on-metal hip resurfacing arthroplasty", Journal of Biomechanics, vol. 48, pp. 318-323. [DOIWWW] [ hip gait; orthopedics; ]
* Nedergaard, N.J., Heinen, F., Sloth, S., Holmberg, H.-C. & Kersting, U.G. (2015), "Biomechanics of the ski cross start indoors on a customised training ramp and outdoors on snow", Sports Biomechanics, vol. 9, pp. 1-14. [DOI] [ sports; ]
* Nishiki, T., Tawara, D., Tsujikami, T., Ninomiya, S., Okayama, H., Morikawa, S. & Sakamoto, J. (2015), "Musculoskeletal simulation for design of supportive underwear for pelvic floor disorder", Proceedings 8th Asian-Pasific Conference on Biomechanics, 16-19 September 2015, Sapporo, Japan, pp. 282. [WWW] [ FEA; ]
* Pendergast, M. & Rusovici, R. (2015), "A finite element parametric study of clavicle fixation plates", Int J Numer Method Biomed Eng. [DOI] [ shoulder; FEA; orthopedics; ]
* Putzer, M., Ehrlich, I., Rasmussen, J., Gebbeken, N. & Dendorfer, S. (2015), "Sensitivity of lumbar spine loading to anatomical parameters", Journal of Biomechanics, vol. 15. [DOI] [ spine; methods; ]
* Shin, Y.-H., Choi, J.-S., Kang, D.-W., Seo, J.-W., Lee, J.-H., Kim, J.-Y., Kim, D.-H., Yang, S.-T. & Tack, G.-R. (2015), "A study on human musculoskeletal model for cycle fitting: comparison with EMG", International Journal of Medical, Health, Pharmaceutical and Biomedical Engineering, vol. 9. [WWW] [ validation; sports; ]
* Sins, L., Tétreault, P., Hagemeister, N. & Nuño, N. (2015), "Adaptation of the AnyBody™ musculoskeletal shoulder model to the nonconforming total shoulder arthroplasty context", Journal of Biomechanical Engineering, vol. 137 (10). [DOI] [ upper extremity; orthopedics; ]
* Skals, S.L. (2015), "Prediction of ground reaction forces and moments during sports-related movements", Master's Thesis, Aalborg University, Denmark. [PDFWWW] [ validation; methods; sports; ]
* NEW!!! Svindt Gammelgaard, M. (2015), "A general marker-less motion capture approach for the Microsoft Kinect Sensor v2 using subject-specific articulated models within an iterative closest point algorithm for improved anatomical accuracy", Master's Thesis, Aalborg University, Denmark. [WWW] [ lower extremity; methods; sports; ]
* Varady, P.A., Glitsch, U. & Augat, P. (2015), "Loads in the hip joint during physically demanding occupational tasks: A motion analysis study", Journal of Biomechanics. [DOIWWW] [ hip orthopedics; work place ergonomics; ]
* Wang, X., Wang, C., Wang, Z. & Li, H. (2015), "Comfort analysis in EVA reachable envelope based on human-spacesuit integrated biomechanical modeling", Communications in Computer and Information Science, vol. 528, pp. 539-545. [DOI] [ upper extremity; work place ergonomics; aerospace; ]
* Willhuber, G.C., Zderic, I., Gras, F., Wahl, D., Sancineto, C., Barla, J., Windolf, M., Richards, R.G. & Gueorguiev, B. (2015), "Analysis of sacro-iliac joint screw fixation: does quality of reduction and screw orientation influence joint stability? A biomechanical study", International Orthopaedics, pp. 1-7. [DOI] [ gait; orthopedics; ]
* Worsley, P.R., Whatling, G., Barrett, D., Holt, C., Stokes, M. & Taylor, M. (2015), "Assessing changes in subjective and objective function from pre- to post-knee arthroplasty using the Cardiff Dempster–Shafer theory classifier", Computer Methods in Biomechanics and Biomedical Engineering, pp. 1-10. [DOI] [ knee; methods; orthopedics; ]
* Yang, Y., Cheng, X., rong, G.X. & ping, W.Y. (2015), "Numerical analysis of comfort of military helmets. based on inverse dynamics", Acta Armamentarii, vol. 36 (2), pp. 321-326. [DOI] [ spine; cervical; work place ergonomics; ]
* Yoder, A.J., Petrella, A.J. & Silverman, A.K. (2015), "Trunk-pelvis motion, joint loads, and muscle forces during walking with a transtibial amputation", Gait and Posture. [DOI] [ spine; gait; rehab; ]
* Zander, T., Dreischarf, M., Schmidt, H., Bergmann, G. & Rohlmann, A. (2015), "Spinal loads as influenced by external loads: A combined in vivo and in silico investigation", Journal of Biomechanics. [DOI] [ spine; orthopedics; ]
* Zhang, X., Chen, Z., Wang, L., Yang, W., Li, D. & Jin, Z. (2015), "Prediction of hip joint load and translation using musculoskeletal modelling with force-dependent kinematics and experimental validation", Journal of Engineering in Medicine. [DOI] [ hip validation; orthopedics; ]
* Zhou, L., Bai, S., Andersen, M.S. & Rasmussen, J. (2015), "Modeling and design of a spring-loaded, cable-driven, wearable exoskeleton for the upper extremity", Norwegian Society of Automatic Control, vol. 36 (3), pp. 167-177. [DOI] [ upper extremity; methods; rehab; exoskeleton; ]

2014

* Alexander, N. & Schwameder, H. (2014), "Analysis of muscle forces during downhill walking", eProceedings of the 32nd Conference of the International Society of Biomechanics in Sport; 2014; Johnson City, TN, pp. 199-202. [PDF] [ lower extremity; gait; ]
* Ardestani, M.M., Moazen, M., Chen, Z., Zhang, J. & Jin, Z. (2014), "A real-time topography of maximum contact pressure distribution at medial tibiofemoral knee implant during gait: Application to knee rehabilitation", Neurocomputing. [DOI] [ knee; methods; FEA; orthopedics; rehab; ]
* Ardestani, M.M., Moazen, M. & Jin, Z. (2014), "Gait modification and optimization using neural network–genetic algorithm approach: Application to knee rehabilitation", Expert Systems with Applications, vol. 41, pp. 7466–7477. [DOI] [ knee; gait; methods; FEA; orthopedics; rehab; ]
* Ardestani, M.M., Moazen, M. & Jin, Z. (2014), "Sensitivity analysis of human lower extremity joint moments due to changes in joint kinematics", Medical Engineering and Physics. [DOI] [ lower extremity; gait; ]
* Ardestania, M.M., Chena, Z., Wanga, L., Liana, Q., Liua, Y., Hea, J., Lia, D. & Jin, Z. (2014), "A neural network approach for determining gait modifications to reduce the contact force in knee joint implant", Medical Engineering & Physics. [DOI] [ knee; gait; methods; orthopedics; ]
* Bajelan, S. & Azghani, M.R. (2014), "Musculoskeletal modeling and simulation of three various Sit-to-stand strategies; an evaluation of the biomechanical effects of the 3 chair-rise strategy modification", Technology and Health Care, pp. 1–18. [ rehab; ]
* Basafa, E., Murphy, R.J., Gordon, C.R. & Armand, M. (2014), "Modeling the biomechanics of swine mastication – an inverse Dynamics approach", Journal of Biomechanics. [DOI] [ mandible; animal; orthopedics; ]
* Bonin, D., Wischniewski, S., Wirsching, H.-J., Upmann, A., Rausch, J. & Paul, G. (2014), "Exchanging data between Digital Human Modelling systems: a review of data formats", 3rd International Digital Human Modeling Symposium, Tokyo, Japan. [WWW] [ methods; ]
* Bosch, J.B. (2014), "Estudio computacional de los sistemas de fijación interna aplicados a la recuperación de fracturas diafisarias del húmero [Computational study of internal fixation systems applied to recovery of humeral diaphyseal fractures]", Master's Thesis, Universidad De Las Palmas De Gran Canaria, Mexico. [PDFWWW] [ upper extremity; FEA; orthopedics; ]
* Chen, Z., Zhang, X., Ardestani, M.M., Wang, L., Liu, Y., Lian, Q., He, J., Li, D. & Jin, Z. (2014), "Prediction of in vivo joint mechanics of an artificial knee implant using rigid multi-body dynamics with elastic contacts", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 228, pp. 564-575. [DOIWWW] [ knee; validation; orthopedics; ]
* Coombs, D.J., Wykosky, S. & Bushelow, M. (2014), "Calcaneal Fixation Plate Test Method Development", SIMULIA Community Conference, May 19-24, 2014, Providence, RI. [PDF] [ foot; methods; FEA; orthopedics; ]
* Cutlip, K., Nimbarte, A.D., Ning, X. & Jaridi, M. (2014), "A Biomechanical Strain Index to Evaluate Shoulder Stress", Proceedings of the 2014 Industrial and Systems Engineering Research Conference. [PDFWWW] [ shoulder; methods; work place ergonomics; ]
* D'Souza, S.F. (2014), "Physical efficiency as a function of age: Development of an age scaling model for biomechanical simulation", Ph.D. Thesis, Technical University of Munich. [PDF] [ methods; ]
* Fluit, R., Andersen, M., Kolk, S., Verdonschot, N. & Koopman, H. (2014), "Prediction of ground reaction forces and moments during various activities of daily living", Journal of Biomechanics, vol. 47 (10), pp. 2321-2329. [DOI] [ gait; methods; ]
* hai Gao, Z., Fan, D., Wang, D., Zhao, H., Zhao, K. & Chen, C. (2014), "Muscle activity and co-contraction of musculoskeletal model during steering maneuver", Bio-Medical Materials and Engineering, vol. 24, pp. 2697–2706. [DOI] [ automotive; ]
* Graichen, S., Stein, T. & Deml, B. (2014), "Adaptive Workplace Design Based on Biomechanical Stress Curves", Chapter 13, p. 175-183, in Advances in Production Technology edited by Christian Brecher, Springer Open. [PDFWWW] [ methods; work place ergonomics; ]
* Han, K.-S., Yu, C.-H. & Kwon, T.-K. (2014), "Muscle forces and activation patterns in the spine during spine stabilization exercise using a whole body tilt device", International Journal of Precision Engineering and Manufacturing, vol. 15 (12), pp. 2589-2595. [DOI] [ spine; validation; ]
* Jung, Y., Jung, M., Lee, K. & Koo, S. (2014), "Ground reaction force estimation using an insole-type pressure mat and joint kinematics during walking", Journal of Biomechanics. [DOIWWW] [ foot; gait; methods; ]
* Li, J., Redmond, A.C., Jin, Z., Fisher, J., Stone, M.H. & Stewart, T.D. (2014), "Hip Contact Forces in Asymptomatic Total Hip Replacement Patients Differ from Normal Healthy Individuals: Implications for Preclinical Testing", Clinical Biomechanics, pp. S0268-0033. [DOI] [ hip orthopedics; ]
* Li, L., Ji, Z., Xia, Y. & Gong, R. (2014), "Application of inertial navigation system in portable human body joint power test system", International Journal of Distributed Sensor Networks (Article ID 341072). [WWW] [ upper extremity; methods; ]
* Li, T., Liu, T., Li, G., Tao, W., Inoue, Y. & Yi, J. (2014), "A novel parallel mechanism designed for walking assistance", In Proceedings of IEEE International Conference on Robotics and Biomimetics, Bali, Indonesia, pp. 980-985. [ foot; gait; rehab; exoskeleton; ]
* N.Quirk, Baker, M. & Epari, D. (2014), "Force reaction analysis of lower limbs during common netball motions; a musculoskeletal modeling approach", Australian Biomedical Engineering Conference 2014, Canberra, Australia, 20 - 22 August 2014. [WWW] [ knee; sports; ]
* Okamoto, Y., Murakami, H., Demura, S., Kato, S., Yoshioka, K., Hayashi, H., Sakamoto, J., Kawahara, N. & Tsuchiya, H. (2014), "The effect of kyphotic deformity due to vertebral fracture – a finite element analysis of a 10 and 20 degree wedge-shaped vertebral fracture model", The Spine Journal. [DOIWWW] [ spine; FEA; orthopedics; ]
* Olesen, C.G., de Zee, M. & Rasmussen, J. (2014), "Comparison between a computational seated human model and experimental verification data", Applied Bionics and Biomechanics. [DOI] [ validation; seating; ]
* Phillips, C.W., Forrester, A.I., Hudson, D.A. & Turnock, S.R. (2014), "Comparison of kinematic acquisition methods for musculoskeletal analysis of underwater flykick", ScienceDirect, vol. 72, pp. 56 – 61. [DOI] [ methods; sports; ]
* Rajaee, M.A., Arjmand, N., Shirazi-Adl, A., Plamondon, A. & Schmidt, H. (2014), "Comparative evaluation of six quantitative lifting tools to estimate spine loads during static activities", Applied Ergonomics, vol. 48, pp. 22–32. [DOIWWW] [ spine; validation; ]
* Rasmussen, J., Andersen, M.S., Al-Munajjed, A.A. & Upmann, A. (2014), "H-point simulation in musculoskeletal models of seating", 3rd International Digital Human Modeling Symposium (DHM2014), May 20-22, 2014, Tokyo, Japan. [WWW] [ seating; methods; automotive; ]
* Seo, J.-W., Kang, D.-W., Kim, J.-Y., Yang, S.-T., Kim, D.-H., Choi, J.-S. & Tack, G.-R. (2014), "Finite element analysis of the femur during stance phase of gait based on musculoskeletal model simulation", Bio-Medical Materials and Engineering, vol. 24, pp. 2485–2493. [DOI] [ lower extremity; validation; gait; FEA; ]
* Sins, L. (2014), "Étude expérimentale et numérique d'arthroplasties totales anatomiques de l'épaule [Experimental and numerical study of anatomical total joint replacement of the shoulder]", Ph.D. Thesis, ÉTS - École de Technologie Supérieure, Montréal, Canada. [PDFWWW] [ shoulder; orthopedics; ]
* Weber, T.A., Dendorfer, S., Grifka, J., Verkerke, G.J. & Renkawitz, T. (2014), "Does computer-assisted Femur First THR improve musculoskeletal loading conditions?", BioMed Research International (Article ID 625317). [WWW] [ hip methods; orthopedics; ]
* Weber, T., Al-Munajjed, A.A., Verkerke, G.J., Dendorfer, S. & Renkawitz, T. (2014), "Influence of Minimally Invasive Total Hip Replacement on Hip Reaction Forces and Their Orientations", Journal of Orthopaedic Research. [DOI] [ hip orthopedics; ]
* NEW!!! Wibawa, A.D. (2014), "Lower limb musculoskeletal modeling during normal walking, one-legged forward hopping, side jumping and knee flexion: A Validation study of the AnyBody Modeling System for optimizing anterior cruciate ligament reconstruction", Ph.D. Thesis, University of Groningen, the Netherlands. [WWW] [ knee; validation; orthopedics; ]
* Witkowski, M., Sitnik, R. & Verdonschot, N. (2014), "Recent improvements in SPE3D – a VR-based surgery planning environment", The Engineering Reality of Virtual Reality. [DOIWWW] [ hip methods; orthopedics; ]
* Wu, J.Z., Sinsel, E.W., Shroyer, J.F., Warren, C.M., Welcome, D.E., Zhao, K.D., An, K.-N. & Buczek, F.L. (2014), "Analysis of the musculoskeletal loading of the thumb during pipetting – A pilot study", Journal of Biomechanics, vol. 47, Issue 2, pp. 392–399. [DOI] [ upper extremity; hand; work place ergonomics; ]

2013

* binti Abdul Majid, N.A., Abdullah, M.F.E., Jamaludin, M.S., Notomi, M. & Rasmussen, J. (2013), "Musculoskeletal analysis of driving fatigue: The influence of seat adjustments", Advanced Engineering Forum, vol. 10, pp. 373-378. [PDF] [ seating; automotive; ]
* Ali, N., Andersen, M.S., Rasmussen, J., Gordon, D., Robertson, E. & Rouhi, G. (2013), "The application of musculoskeletal modeling to investigate gender bias in non-contact ACL injury rate during singleleg landings", Computer Methods in Biomechanics and Biomedical Engineering. [DOI] [ knee; validation; sports; ]
* Andersen, M.S., Yang, J., de Zee, M., Zhou, L., Bai, S. & Rasmussen, J. (2013), "Full-body musculoskeletal modeling using dual Microsoft Kinect sensors and the Anybody Modeling System", TGCS 2013 Symposium, August 2013 Natal, Brazil. [WWW] [ methods; ]
* Buchner, E. (2013), "Analyse der Ergonomie beim Einstieg in ein Fahrzeug - teil 1 [Analysis of ergonomics when entering a vehicle - part 1]", Master's Thesis, Fachhochschule Technikum Wien, Austria. [ automotive; ]
* Buchner, E. (2013), "Analyse der Ergonomie beim Einstieg in ein Fahrzeug - teil 2 [Analysis of ergonomics when entering a vehicle - part 2]", Master's Thesis, Fachhochschule Technikum Wien, Austria. [ automotive; ]
* Cadova, M. (2013), "Use of OpenSim and AnyBody modelling software for dynamic simulation of the human masticatory system", 18th International Symposium on Computational Biomechanics in Ulm CBU 2013. [PDF] [ mandible; ]
* Cao, E., Inoue, Y., Liu, T. & Shibata, K. (2013), "An Inverse Dynamic Approach for Quantitative Muscle Force Estimation during Human Standing-Up Process", Journal of Biomechanical Science and Engineering, vol. 8 (1). [WWW] [ lower extremity; validation; rehab; ]
* Cassidy, K., Hangalur, G., Sabharwal, P. & Chandrashekar, N. (2013), "Combined In Vivo/In Vitro Method to Study Anteriomedial Bundle Strain in the Anterior Cruciate Ligament Using a Dynamic Knee Simulator", Journal of Biomechanical Engineering, vol. 135. [DOI] [ knee; validation; ]
* Doran, E.R. (2013), "Effects of combining of upper and lower body resistance training on lumbar loading", Master's Thesis, Oregon State University. [PDFWWW] [ spine; orthopedics; ]
* Fluit, R., Andersen, M., Verdonschot, N. & Koopman, H. (2013), "Optimal inverse dynamic simulation of human gait", ESMAC 2013 22nd Annual Meeting of the European Society for Movement Analysis in Adults and Children, September 2013, Glasgow, Scotland. [PDFWWW] [ gait; methods; orthopedics; ]
* Galloway, F., Kahnt, M., Ramm, H., Worsley, P., Zachow, S., Nair, P. & Taylor, M. (2013), "A large scale finite element study of a cement less osseointegrated tibial tray", Journal of Biomechanics, vol. 46, pp. 1900–1906. [DOI] [ knee; FEA; orthopedics; ]
* Guenzkofer, F., Bubb, H. & Bengler, K. (2013), "The validity of maximum force predictions based on single-joint torque measurements", The 2nd International Digital Human Modeling Symposium, Ann Arbor June 11-13, 2013. [PDF] [ upper extremity; methods; ]
* Haberly, G.J. (2013), "Hip Loading During the Squat Exercise", Master's Thesis, Oregon State University. [ hip orthopedics; ]
* Han, K.-S., Kim, K., Park, W.M., Lim, D.S. & Kim, Y.H. (2013), "Effect of centers of rotation on spinal loads and muscle forces in total disk replacement of lumbar spine", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 227 (5), pp. 543-550. [DOIWWW] [ spine; lumbar; orthopedics; ]
* Han, K.-S., Kim, Y.H. & Kim, K. (2013), "Alteration of ligament stiffness can change the spine muscle coordination in flexed positions", 2013 ORS Annual Meeting, San Antonio, TX. [PDFWWW] [ spine; ]
* Hess, S. (2013), "Modelling and analysis of an impulse stimulated human body by a hand-guided power tool", Master's Thesis, Karlsruhe Institute of Technology. [PDFWWW] [ upper extremity; work place ergonomics; ]
* Jackson, M., Sylvestre, E., Bleau, J., Allard, P. & Begon, M. (2013), "Estimating optimal shoulder immobilization postures following surgical repair of massive rotator cuff tears", Journal of Biomechanics, vol. 46 (1), pp. 179–182. [DOI] [ shoulder; orthopedics; rehab; ]
* Jun, S.-k., Zhou, X., Ramsey, D.K. & Krovi, V.N. (2013), "Kinetostatic Design-Refinement of Articulated Knee Braces", Proceedings of the ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013 August 4-7, 2013, Portland, OR. [PDF] [ knee; methods; rehab; exoskeleton; ]
* kook Jun, S., Zhou, X., Ramsey, D.K. & Krovi, V.N. (2013), "A Comparative Study of Human Motion Capture and Analysis Tools", The 2nd International Digital Human Modeling Symposium, Ann Arbor, MI. [PDFWWW] [ lower extremity; methods; ]
* Jung, M., Damsgaard, M., Andersen, M.S. & Rasmussen, J. (2013), "Integrating Biomechanical Manikins into a CAD Environment", 2nd International Digital Human Modeling Symposium, Michigan Ann Arbor. [PDF] [ methods; ]
* Jung, Y., Jung, M., Lee, K. & Koo, S. (2013), "Estimating Knee Adduction Moment From Joint Kinematics Using Musculoskeletal Simulation With Conditional Reaction Elements", ORS 2013 Annual Meeting, San Antonio, TX. [PDF] [ knee; validation; ]
* Koblauch, H., Bern, S., Brauer, C., Mikkelsen, S., de Zee, M., Thygesen, L., Helweg-Larsen, K., Alkjær, T., Andersen, M. & Simonsen, E. (2013), "Lumbar Load in Common Work Tasks for Airport Baggage Handlers – A 3D Dynamic Analysis", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW] [ spine; work place ergonomics; ]
* Koning, B.H., van der Krogt, M.M., Baten, C.T. & Koopman, B.F. (2013), "Driving a musculoskeletal model with inertial and magnetic measurement units", Computer Methods in Biomechanics and Biomedical Engineering. [DOI] [ lower extremity; gait; methods; ]
* Kulcsar, R.M., Borozan, I.S., Argesanu, V. & Madaras, L. (2013), "Car Seats Ergonomic Evaluation", International Journal of Engineering. [WWW] [ spine; lower extremity; validation; seating; automotive; ]
* Lemieux, P., Tetreault, P., Hagemeister, N. & Nuno, N. (2013), "Influence of prosthetic humeral head size and medial offset on the mechanics of the shoulder with cuff tear arthropathy: A numerical study", Journal of Biomechanics, vol. 46 (4), pp. 806–812. [DOI] [ shoulder; orthopedics; ]
* Lemieux, P.O. (2013), "Analyse numérique des paramètres biomécaniques influencant la fonction de l’épaule atteinte d’arthropathie de rupture de coiffe [Numerical analysis of biomechanical parameters that Influence shoulder function in case of cuff tear arthropathy]", Ph.D. Thesis, L’école de technologie supérieure, Montréal, Canada. [PDF] [ shoulder; orthopedics; ]
* Lemieux, P.O., Hagemeister, N., Tetreault, P. & Nuno, N. (2013), "Influence of the medial offset of the proximal humerus on the glenohumeral destabilising forces during arm elevation: a numerical sensitivity study", Computer Methods in Biomechanics and Biomedical Engineering, vol. 16 (1), pp. 1-9. [DOIWWW] [ shoulder; sensitivity analysis; orthopedics; ]
* Lenar, J., Witkowski, M., Carbone, V., Kolk, S., Adamczyk, M., Sitnik, R., van der Krogt, M. & Verdonschot, N. (2013), "Lower body kinematics evaluation based on a multidirectional four-dimensional structured light measurement", Journal of Biomedical Optics, vol. 18. [ lower extremity; gait; methods; ]
* Mellon, S.J., Grammatopoulos, G., Andersen, M.S., Pegg, E.C., Pandit, H.G., Murray, D.W. & Gill, H.S. (2013), "Individual motion patterns during gait and sit-to-stand contribute to edge-loading risk in metal-on-metal hip resurfacing", Journal of Engineering in Medicine. [DOIWWW] [ hip gait; orthopedics; ]
* Mirakhorlo, M., Azghani, M.R. & Kahrizi, S. (2013), "Validation of a Musculoskeletal Model of Lifting and its Application for Biomechanical Evaluation of Lifting Techniques", Journal of Research in Health Sciences. [ lower extremity; validation; work place ergonomics; ]
* Nakashima, M., Hasegawa, T., Kamiya, S. & Takagi, H. (2013), "Musculoskeletal Simulation of the Breaststroke", Journal of Biomechanical Science and Engineering, pp. 13-0136. [DOIWWW] [ upper extremity; lower extremity; validation; sports; ]
* Nakashima, M., Hasegawa, T., Matsuda, A., Shimana, T. & Omori, K. (2013), "3D-CG based musculoskeletal simulation for a swimmer wearing competitive swimwear", Procedia Engineering, vol. 60, pp. 367-372. [DOI] [ validation; sports; ]
* Nimbarte, A.D., Sivak-Callcott, J.A., Zreiqat, M. & Chapman, M. (2013), "Neck Postures and Cervical Spine Loading Among Microsurgeons Operating with Loupes and Headlamp", IIE Transactions on Occupational Ergonomics and Human Factors. [DOI] [ spine; cervical; orthopedics; work place ergonomics; ]
* Nimbarte, A.D., Sun, Y., Jaridi, M. & Hsiao, H. (2013), "Biomechanical loading of the shoulder complex and lumbosacral joints during dynamic cart pushing task", Applied Ergonomics. [DOI] [ shoulder; spine; validation; work place ergonomics; ]
* Nolte, D., Andersen, M.S., Rasmussen, J. & Al-Munajjed, A. (2013), "Development of a patient-specific musculoskeletal model of a healthy knee to analyze hard and soft tissue loading", 21st Annual Symposium on Computational Methods in Orthopaedic Biomechanics, San Antonio, TX. [PDF] [ knee; ]
* Oliveira, A.S., Silva, P.B., Lund, M.E., Gizzi, L., Farina, D. & Kersting, U.G. (2013), "Effects of Perturbations to Balance on Neuromechanics of Fast Changes in Direction during Locomotion", PLOS ONE, vol. 8 (3). [DOI] [ rehab; ]
* Oliveira, A.S.C., de Brito Silva, P., Lund, M.E., Kersting, U.G. & Farina, D. (2013), "Fast changes in direction during human locomotion are executed by impulsive activation of motor modules", Neuroscience, vol. 228, pp. 283–293. [DOI] [ lower extremity; ]
* Pellikaan, P., van der Krogt, M., Carbone, V., Fluit, R., Vigneron, L., van Deun, J., Verdonschot, N. & Koopman, H. (2013), "Evaluation of a morphing based method to estimate muscle attachment sites of the lower extremity", Journal of Biomechanics. [DOIWWW] [ lower extremity; methods; ]
* Petrella, A., Rasmussen, J., Al-Munajjed, A., Damsgaard, M., Lund, M. & Kiis, A. (2013), "How Good is Good Enough? Lessons in Musculoskeletal Model Validation With the Anybody Modeling System", Journal of Medical Devices, vol. 7 (4). [DOI] [ validation; ]
* Pontonnier, C., de Zee, M., Samani, A., Dumont, G. & Madeleine, P. (2013), "Strengths and limitations of a musculoskeletal model for an analysis of simulated meat cutting tasks", Applied Ergonomics. [DOI] [ upper extremity; shoulder; validation; work place ergonomics; ]
* Sanford, B.A., Williams, J.L., Zucker-Levin, A.R. & Mihalko, W.M. (2013), "Tibiofemoral Joint Forces during the Stance Phase of Gait after ACL Reconstruction", Open Journal of Biophysics, vol. 3, pp. 277-284. [DOI] [ knee; gait; orthopedics; rehab; ]
* Schwarze, M., Hurschler, C., Seehaus, F., Correa, T. & Welke, B. (2013), "Influence of transfemoral amputation length on resulting loads at the osseointegrated prosthesis fixation during walking and falling", Clinical Biomechanics, vol. 13, pp. S0268. [DOI] [ lower extremity; gait; rehab; ]
* Schwarze, M., Hurschler, C., Seehaus, F., Oehler, S. & Welke, B. (2013), "Loads on the prosthesis–socket interface of above-knee amputees during normal gait: Validation of a multi-body simulation", Journal of Biomechanics, vol. 46, pp. 1201–1206. [DOI] [ lower extremity; validation; gait; rehab; ]
* Song, W.-K., Ko, B.-W. & Lee, J. (2013), "Dynamics Analysis of Upper-Extremity Motions of Stroke Survivors during Reaching Tasks at Different Levels", The 22nd IEEE International Symposium on Robot and Human Interactive Communication, Gyeongju, Korea. [DOI] [ upper extremity; rehab; ]
* van Drongelen, S., Wolf, S.I. & Fradet, L. (2013), "Muscle load in reaching movements performed by a wheelchair user: a case study", Informa Healthcare. [DOI] [ shoulder; validation; rehab; ]
* Vanheule, V., Andersen, M.S., Wirix-Speetjens, R., Jonkers, I., Victor, J. & Sloten, J.V. (2013), "Modeling of Patient-Specific Knee Kinematics and Ligament Behavior Using Force-Dependent Kinematics", ISB Technical Group on Computer Simulation, August 2013 Natal, Brazil. [WWW] [ knee; ]
* Wagner, D.W., Stepanyan, V., Shippen, J.M., Demers, M.S., Gibbons, R.S., Andrews, B.J., Creasey, G.H. & Beaupre, G.S. (2013), "Consistency Among Musculoskeletal Models: Caveat Utilitor", Annals of Biomedical Engineering. [DOI] [ methods; ]
* Welke, B., Schwarze, M., Hurschler, C., Calliess, T. & Seehaus, F. (2013), "Multi-Body Simulation of Various Falling Scenarios for Determining Resulting Loads at the Prosthesis Interface of Transfemoral Amputees with Osseointegrated Fixation", Orthopaedic Research Society. [DOI] [ lower extremity; rehab; ]
* Wibawa, A.D., Verdonschot, N., Halbertsma, J.P., Burgerhof, J., Diercks, R.L. & Verkerke, G. (2013), "Lower limb musculoskeletal model validation during one legged forward hopping and side jumping in healthy subjects using EMG", HCI International 2013 - Posters’ Extended Abstracts. Communications in Computer and Information Science, vol. 373, pp. 557-560. [DOI] [ lower extremity; validation; ]
* Worsley, P., Stokes, M., Barrett, D. & Taylor, M. (2013), "Joint loading asymmetries in knee replacement patients observed both pre- and six months post-operation", Clinical Biomechanics. [DOI] [ knee; orthopedics; ]
* Wu, J.Z., Sinsel, E.W., Shroyer, J.F., Welcome, D.E., Zhao, K.D., An, K.-N. & Buczek, F.L. (2013), "The musculoskeletal loading profile of the thumb during pipetting based on tendon displacement", Medical Engineering & Physics, vol. Volume 35, Issue 12, pp. 1801-1810. [DOI] [ upper extremity; hand; work place ergonomics; ]
* Yang, M., Xu, Z., Liu, Y., He, Y. & Xu, Y. (2013), "Perceiving and Predicting the Intended Motion with Human-Machine Interaction Force for Walking Assistive Exoskeleton Robot", Proceedings of 2013 IEEE International Conference on Mechatronics and Automation, Takamatsu, Japan. [ lower extremity; rehab; exoskeleton; ]
* Yang, Z., Zheng, Y. & Fu, S. (2013), "Simulation of pushing the push-pull rod action based on human body dynamics", Digital human modeling and applications in health, safety, ergonomics, and risk management. Human body modeling and ergonomics. 4th International Conference, DHM 2013, Held as Part of HCI International 2013, Las Vegas, NV, USA, July 21-26, 2013, Proceedings, Part II, pp. 393-401. [DOI] [ upper extremity; work place ergonomics; aerospace; ]
* Zhang, J., Zhou, R., Li, J., Ding, L. & Wang, L. (2013), "Optimization for lunar mission training scheme based on anybody software", Digital human modeling and applications in health, safety, ergonomics, and risk management. Human body modeling and ergonomics. 4th International Conference, DHM 2013, Held as Part of HCI International 2013, Las Vegas, NV, USA, July 21-26, 2013, Proceedings, Part II, pp. 169-178. [DOI] [ upper extremity; validation; aerospace; ]
* Zhou, L., Bai, S., Andersen, M.S. & Rasmussen, J. (2013), "Design and optimization of a spring-loaded cable-driven robotic exoskeleton", Proceedings of the 25th Nordic Seminar on Computational Mechanics, pp. 217-220. [PDF] [ shoulder; rehab; exoskeleton; ]
* Zhu, R., Zander, T., Dreischarf, M., N.Duda, G., Rohlmann, A. & Schmidt, H. (2013), "Considerations when loading spinal finite element models with predicted muscle forces from inverse static analyses", Journal of Biomechanics. [DOI] [ spine; FEA; ]

2012

* hong, J.X., bing, M.J., cheng, W.R., Fang, P. & Fang, S. (2012), "Effect of helmet mass and mass center on neck muscle strength in military pilots", Journal of Medical Biomechanics. [WWW] [ spine; cervical; work place ergonomics; aerospace; ]
* Ahmed, S. & Babski-Reeves, K. (2012), "Assessment of Upper Extremity Postures in Novice and Expert during Simulated Carpentry Tasks", Human Factors and Ergonomics Society 56th Annual Meeting. [DOI] [ upper extremity; work place ergonomics; ]
* Alkjær, T., Wieland, M.R., Andersen, M.S., Simonsen, E.B. & Rasmussen, J. (2012), "Computational modeling of a forward lunge: towards a better understanding of the function of the cruciate ligaments", Journal of Anatomy. [DOI] [ knee; ]
* Andersen, M.S., Damsgaard, M., Rasmussen, J., Ramsey, D.K. & Benoit, D.L. (2012), "A linear soft tissue artefact model for human movement analysis: Proof of concept using in vivo data", Gait Posture, vol. 35 (4), pp. 606-611. [DOI] [ gait; methods; ]
* Andersen, M.S., Mellon, S., Lund, M.E., Grammatopoulos, G. & Gill, H.S. (2012), "The effect of including accurate pelvis bony landmarks in a nonlinearly scaled musculoskeletal lower extremity model", International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy. [PDF] [ hip gait; methods; orthopedics; ]
* Andersen, M.S., Rasmussen, J. & Damsgaard, M. (2012), "Letter to the Editor", Journal of Theoretical Biology, vol. 298, pp. 154–155. [DOI] [ methods; ]
* Böhme, J., Shim, V., Höch, A., Mütze, M., Müller, C. & Josten, C. (2012), "Clinical implementation of finite element models in pelvic ring surgery for prediction of implant behavior", Clinical Biomechanics. [DOI] [ hip FEA; orthopedics; ]
* Cao, E. (2012), "Estimation of lower limb muscle forces during human sit-to-stand process with a rehabilitation training system", Biomedical and Health Informatics (BHI), 2012 IEEE-EMBS International Conference, pp. 1016 - 1019. [DOIWWW] [ lower extremity; validation; rehab; ]
* Carbone, V., van der Krogt, M.M., Koopman, B.F.J.M. & Verdonschot, N. (2012), "Subject-Specific Musculo-Tendon Parameters Based on MRI and Dynamometer Tests", ESMAC 2012, 12 - 15 September, Stockholm, Sweden. [PDF] [ lower extremity; knee; validation; methods; ]
* Carbone, V., van der Krogt, M.M., Koopman, B.F.J.M. & Verdonschot, N. (2012), "Sensitivity of subject-specific models to errors in musculo-skeletal geometry", Journal of Biomechanics (14). [DOI] [ lower extremity; ]
* Cho, K., Kim, Y., Yi, D., Jung, M. & Lee, K. (2012), "Analysis and evaluation of a combined human - exoskeleton model under two different constraints condition", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF] [ rehab; exoskeleton; ]
* Engstler, F. (2012), "Perzentilierung maximaler Gelenkmomente des Menschen [Maximum joint moment percentiles for man]", Master's Thesis, Technischen Universität München. [PDFWWW] [ methods; ]
* Eschweiler, J., Fieten, L., Dell’Anna, J., Kabir, K., Gravius, S., Tingart, M. & Radermacher, K. (2012), "Application and evaluation of biomechanical models and scores for the planning of total hip arthroplasty", Journal of Engineering in Medicine. [DOI] [ hip validation; orthopedics; ]
* Fluit, R., van der Krogt, M.M., van der Kooij, H., Verdonschot, N. & Koopman, H.F.J.M. (2012), "A simple controller for the prediction of three-dimensional gait", Journal of Biomechanics. [DOI] [ gait; orthopedics; ]
* Galloway, F., Worsley, P., Stokes, M., Nair, P. & Taylor, M. (2012), "Development of a statistical model of knee kinetics for applications in pre-clinical testing", Journal of Biomechanics, vol. 45, pp. 191–195. [DOI] [ knee; gait; methods; ]
* Grammatopoulos, G., Mellon, S., Andersen, M.S., Pandit, H., Gundle, R., McLardy-Smith, P., Murray, D. & Gill, H. (2012), "Why don't all malpositioned resurfaced cups have high wear? - A dynamic, gait lab study", Journal of Bone and Joint Surgery. British Volume. Orthopaedic Proceedings. [ hip gait; orthopedics; ]
* Han, K.-S., Rohlmann, A., Kim, K., Cho, K.W. & Kim, Y.H. (2012), "Effect of Ligament Stiffness on Spinal Loads and Muscle Forces in Flexed Positions", International Journal of Precision Engineering and Manufacturing, vol. Vol. 13 (12), pp. 2233-2238. [DOI] [ spine; lumbar; ]
* Han, K.-S., Rohlmann, A., Zander, T. & Taylor, W.R. (2012), "Lumbar spinal loads vary with body height and weight", Medical Engineering & Physics. [DOI] [ spine; lumbar; orthopedics; ]
* Holmberg, J.L. (2012), "Musculoskeletal Biomechanics in Cross-country Skiing", Ph.D. Thesis, Linköping University, Sweden. [WWW] [ methods; sports; ]
* Holmberg, L.J., Ohlsson, M.L. & Danvind, J. (2012), "Musculoskeletal simulations: a complementary tool for classification of athletes with physical impairments", Prosthetics and Orthotics International, vol. 36, pp. 396–397. [DOI] [ methods; sports; ]
* Holmberg, L.J., Ohlsson, M.L., Supej, M. & Holmberg, H.-C. (2012), "Skiing efficiency versus performance in double-poling ergometry", Computer Methods in Biomechanics and Biomedical Engineering. [DOI] [ sports; ]
* Jung, Y., Jung, M., Lee, K. & Koo, S. (2012), "Ground Reaction Force Estimation Using Musculoskeletal Simulation", 30th Conference of the International Society of Biomechanics in Sport, ISBS2012, Melbourne, Australia. [PDF] [ foot; validation; gait; methods; ]
* Kersting, U.G. (2012), "Implications of subtalar joint motion for muscle and joint loading during running", Journal of Foot and Ankle Research. [DOI] [ ankle; foot; sports; ]
* Kim, T., Lee, K. & Kwon, J. (2012), "Design improvement of the smith machine using simulation on musculoskeletal model", International Journal of CAD/CAM, vol. 12 (1). [WWW] [ lower extremity; validation; sports; ]
* Koning, B., der Krogt, M.V., Baten, C. & Koopman, H. (2012), "Kinematics of a musculoskeletal model using inertial and magnetic measurement units", 12th International Symposium on 3D Analysis of Human Movement (3DHMA), Bologna, Italy, 18th to 20th July 2012. [PDF] [ lower extremity; methods; ]
* Kulcsar, R.M., Madaras, L., Maniu, I., Borozan, I.S. & Argesanu, V. (2012), "Ergonomic Study Regarding the Effects of the Inertia and Centrifugal Forces on the Driver", Mechanisms, Mechanical Transmissions and Robotics, vol. 162, pp. 84-91. [DOIWWW] [ automotive; ]
* Kunze, M., Schaller, A., Steinke, H., Scholz, R. & Voigt, C. (2012), "Combined multi-body and finite element investigation of the effect of the seat height on acetabular implant stability during the activity of getting up", Computer Methods and Programs in Biomedicine, vol. 105 (2), pp. 175–182. [DOI] [ hip seating; FEA; orthopedics; ]
* Kunze, M., Voigt, C., Strauss, G., Scholz, R. & Fischer, M. (2012), "Comparison of multi-body simulations and EMG measurements on the M. deltoideus acromialis", CAME, vol. 1. [ shoulder; validation; ]
* Lemieux, P.O., Nunu, N., Hagemeister, N. & Tetreault, P. (2012), "Mechanical analysis of cuff tear arthropathy during multiplanar elevation with the AnyBody shoulder model", Clinical Biomechanics, vol. 27 (8), pp. 801-806. [DOIWWW] [ shoulder; ]
* Lund, M.E., de Zee, M., Andersen, M.S. & Rasmussen, J. (2012), "On validation of multibody musculoskeletal models", Institution of Mechanical Engineers. Proceedings. Part H: Journal of Engineering in Medicine, vol. 226 (2), pp. 82–94. [DOIWWW] [ validation; methods; ]
* Mellon, S., Andersen, M.S., Grammatopoulos, G. & Gill, H. (2012), "Mal-positioning alone does not necessarily lead to increased wear in metal-on-metal hip resurfacing", Proceedings of the ORS 2012 annual meeting. [PDF] [ hip gait; orthopedics; ]
* Nakashima, M., Maeda, S., Miwa, T. & Ichikawa, H. (2012), "Optimizing Simulation of the Arm Stroke in Crawl Swimming Considering Muscle Strength Characteristics of Athlete Swimmers", Journal of Biomechanical Science and Engineering, vol. 7 (2). [DOI] [ sports; ]
* Olesen, C.G. (2012), "The Influence of Sitting Conditions on Soft Tissue Loads", Ph.D. Thesis, Aalborg University, Denmark. [PDF] [ validation; seating; methods; rehab; ]
* Oomen, P.W., Drost, M.R., van Rhijn, L.W. & Meijer, K. (2012), "Is Strength Scaling Sufficient for the Development of Personalized Multi Body Models?", 20th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, February 3, 2012 University of California Berkeley, Berkeley, California. [PDF] [ methods; ]
* Rackl, M. (2012), "Patient-Specific Modelling of Fractures of the Lower Jaw with FEA and Musculoskeletal Simulation", Master's Thesis, Fachhochschule Regensburg, Germany. [PDF] [ mandible; FEA; orthopedics; ]
* Rashedi, E., Jia, B., Nussbaum, M.A. & Lockhart, T.E. (2012), "Investigating the effects of slipping on lumbar muscle activity, kinematics, and kinetics", Human Factors and Ergonomics Society 56th Annual Meeting. [DOI] [ spine; gait; work place ergonomics; ]
* Rasmussen, J., Boocock, M. & Paul, G. (2012), "Advanced musculoskeletal simulation as an ergonomic design method", A Journal of Prevention, Assessment and Rehabilitation, vol. Volume 41, pp. 6107-6111. [DOI] [ work place ergonomics; ]
* Rasmussen, J., Holmberg, L.J., Sørensen, K., Kwan, M.M.S., Andersen, M.S. & de Zee, M. (2012), "Performance optimization by musculoskeletal simulation", Movement & Sport Sciences, Science & Motricite, vol. 1 (75), pp. 73-83. [DOI] [ sports; ]
* Sheen, D.-P., Lee, D., Lee, S., Sohn, R., Ko, B.W., Song, W.-K. & Lee, K. (2012), "An Upper Limb Motion Analysis of Stroke Patients in Daily Activities Using a Musculoskeletal Model", Proceedings of the International Summit on Human Simulation 2012, St. Pete Beach, FL. [PDF] [ upper extremity; validation; rehab; ]
* Ulrey, B.L. & Fathallah, F.A. (2012), "Subject-specific, whole-body models of the stooped posture with a personal weight transfer device", Journal of Electromygraphy and Kinesiology. [DOI] [ spine; lower extremity; validation; work place ergonomics; exoskeleton; ]
* van der Ploeg, B., Tarala, M., Homminga, J., Janssen, D., Buma, P. & Verdonschot, N. (2012), "Toward a More Realistic Prediction of Peri-Prosthetic Micromotions", Journal Of Orthopaedic Research. [DOI] [ lower extremity; hip gait; FEA; orthopedics; ]
* Voigt, C., Kunze, M., Fischer, M., Strauss, G., Steinke, H., Klöhn, C. & Scholz, R. (2012), "Combined Multi-Body and Finite Element Simulation (AnyBody/ANSYS) – Examples of Application and Validation in Biomechanics", ANSYS Conference & 30th.CADFEM Users’ Meeting. [PDF] [ shoulder; hip validation; FEA; orthopedics; ]
* Voinescu, M., Soares, D.P., Natal Jorge, R.M., Davidescu, A. & Machado, L.J. (2012), "Estimation of the forces generated by the thigh muscles for transtibial amputee gait", Journal of Biomechanics, vol. 45 (0), pp. 972 - 977. [DOIWWW] [ lower extremity; validation; gait; rehab; ]
* Weber, T., Dendorfer, S., Dullien, S., Grifka, J., Verkerke, G.J. & Renkawitz, T. (2012), "Measuring functional outcome after total hip replacement with subject-specific hip joint loading", Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 226 (12), pp. 939-946. [DOI] [ hip orthopedics; ]
* Weber, T., Stezowski, P., Dullien, S. & Dendorfer, S. (2012), "Eine biomechanische Bewertung verschiedener Belastungsszenarios nach der Implantierung einer Hueft-Totalendoprothese [A biomechanical evaluation of different load scenarios after implantation of a total hip replacement]", 89. Jahrestagung der Vereinigung der Bayerischen Chirurgen e.V. 25. - 27. Juli 2012, Regensburg, Germany. [PDF] [ hip methods; FEA; orthopedics; ]
* Wyss, C. & Brunner, R. (2012), "Determination of reaction Forces and Moments Using Multibody Dynamics and FE Analysis, A clinical Application", ESMAC 2012. [PDF] [ foot; gait; FEA; ]
* Zhou, L., Bai, S. & Rasmussen, J. (2012), "Biomechanical modeling of an assistive shoulder orthoses", AAL Forum 2012, 24-27 Sep 2012, Eindhoven, The Netherlands. [PDF] [ shoulder; rehab; exoskeleton; ]
* Zhu, C., Jin, J., Sun, Y. & Zheng, A. (2012), "Simulation of constant resistance knee flexion movement", ICSC 2012, Part I, vol. CCIS 326, pp. 432-439. [WWW] [ knee; sports; ]

2011

* binti Abdul Majid, N.A. (2011), "Musculoskeletal analysis of driving fatigue: The influence of seat condition", Master's Thesis, Meiji University, Japan. [PDF] [ upper extremity; spine; lower extremity; validation; seating; automotive; ]
* binti Abdul Majid, N.A., Notomi, M. & Rasmussen, J. (2011), "Musculoskeletal computational analysis of the influence of car-seat design/adjustment on fatigue-induced driving", Modeling, Simulation and Applied Optimization (ICMSAO), 2011 4th International Conference on, vol. 19-21 April 2011, pp. 1-6. [DOI] [ seating; automotive; ]
* Andersen, M.S., Damsgaard, M. & Rasmussen, J. (2011), "Force-dependent kinematics: a new analysis method for non-conforming joints", Presented at the 13th Biennial International Symposium on Computer Simulation in Biomechanics, pp. 2 pp.. [PDF] [ methods; ]
* Andersen, M.S. & Rasmussen, J. (2011), "Total knee replacement musculoskeletal model using a novel simulation method for non-conforming joints", Proceedings of the International Society of Biomechanics Conference. [PDF] [ knee; gait; methods; ]
* Asfour, S. & Eltoukhy, M. (2011), "Development and Validation of a Three-Dimensional Biomechanical Model of the Lower Extremity", Intech, pp. 161-186. [PDFDOI] [ lower extremity; validation; ]
* Bai, S. & Rasmussen, J. (2011), "Modelling of Physical Human-Robot Interaction for Exoskeleton Designs", ECCOMAS Thematic Conference: Multibody Dynamics 2011, Brussels, Belgium, pp. 6 pp.. [PDF] [ upper extremity; rehab; exoskeleton; ]
* Bajelan, S. (2011), "Musculoskeletal analysis of sit-to-stand maneuver in order to compare the various standing up strategies", 18th Iranian Conference of Biomedical Engineering (ICBME), pp. 215 - 220. [DOI] [ hip knee; rehab; ]
* Cao, E., Inoue, Y., Liu, T. & Shibata, K. (2011), "Estimate Muscle Forces of Ankle Joint with Wearable Sensors", Trans. JSME, Journal of Biomechanical Science and Engineering, vol. 6 (4), pp. 299-310. [DOI] [ foot; validation; ]
* Cao, X. & Z.Dong (2011), "Human measurement technology based on small sample and its application in human factors engineering", In: Proc. IEEE 18Th Int Industrial Engineering and Engineering Management (IE&EM) Conf, pp. 589–591. [DOI] [ methods; ]
* Farahani, S.D., de Zee, M., Andersen, M.S., Lund, M.E. & Rasmussen, J. (2011), "Prediction of the Movement Patterns for Human Squat Jumping using the Inverse-Inverse Dynamics Technique", XIII International Symposium on Computer Simulation in Biomechanics. [PDF] [ lower extremity; methods; ]
* Gadomski, B.C., Rasmussen, J., Galibarov, P. & Puttlitz, C.M. (2011), "The effect of coupled motions and lifting tasks on human lumbar nucleus pressures and annulus fibrosis stresses in a muscle-loaded finite element model", International Society for Biomechanics. [PDF] [ spine; FEA; work place ergonomics; ]
* Gadomski, B.C., Rasmussen, J. & Puttlitz, C.M. (2011), "Implementation of Physiological Muscle Loading in a Finite Element Model of the Human Lumbar Spine", Transactions of the 57th annual meeting of the Orthopaedic Reasearch Society, Transactions of the 57th annual meeting of the Orthopaedic Reasearch Society. . . [PDF] [ spine; validation; FEA; ]
* Gadomski, B.C., Rasmussen, J. & Puttlitz, C.M. (2011), "The effect of muscle loading on internal mechanical parameters of the lumbar spine: a finite element study", Proceedings of 2011 ASME Summer Bioengineering Conference, pp. 2 pp.. [PDF] [ spine; FEA; ]
* Galibarov, P., Dendorfer, S. & Rasmussen, J. (2011), "Two Computational Models of the Lumbar Spine: Comparison and Validation", Proceedings of the 2011 ORS Annual Meeting, Long Beach, CA, vol. Marie Curie Initial Training Network "SpineFX". [PDF] [ spine; validation; ]
* Galibarov, P.E., Al-Munajjed, A.A., Dendorfer, S., Tørholm Christensen, S. & Rasmussen, J. (2011), "The effect of varying the stiffness of spinal fusion devices on the adjacent levels using multibody dynamics simulation", ISTA, 24th annual congress, pp. 2 pp.. [ spine; orthopedics; ]
* Galibarov, P.E., Dendorfer, S. & Tørholm Christensen, S. (2011), "On modelling spine curvature dependent on muscular and external forces in multibody dynamics system", Presented at the International Society of Biomechanics 13th congress, 2011, Brussels, Belgium, pp. 2 pp.. [PDF] [ spine; lumbar; methods; ]
* Grujicic, A., LaBerge, M., Xie, X., Arakere, G., Pandurangan, B., Grujicic, M., Jeray, K.J. & Tanner, S.L. (2011), "Computational investigation of the relative efficacies of nail- and plate-type proximal femoral-fracture fixation implants", Multidiscipline Modeling in Materials and Structures, vol. 7 (3), pp. 212 - 244. [WWW] [ lower extremity; background; methods; FEA; orthopedics; ]
* Han, K.-S., Zander, T., Taylor, W.R. & Rohlmann, A. (2011), "An enhanced and validated generic thoraco-lumbar spine model for prediction of muscle forces", Medical Engineering and Physics, vol. 34 (0), pp. 709-716. [DOIWWW] [ spine; thoracic; lumbar; validation; ]
* Heinen, F., Nedergaard, N.J., Sloth, S. & Kersting, U.G. (2011), "The effect of medially and laterally wedged insoles on lateral ankle stability during sidestepping movements", Footwear Science, vol. 3 (Suppl. 1), pp. 73–74. [DOI] [ ankle; foot; ]
* Holmberg, L. & Klarbring, A. (2011), "Muscle decomposition and recruitment criteria influence muscle force estimates", Multibody System Dynamics, pp. 1-7. [DOI] [ methods; ]
* Hopkins, A.R., Emmenegger, D., Stroud, L., Schärer, C., Lovern, B., Holt, C. & Seebeck, J. (2011), "Generation of subject specific shoulder kinematic models from motion capture data and AnyBody simulation", Presented at the International Soc. Biomechanics conference, 2011 Brussels. [PDF] [ shoulder; ]
* Jia, B., Kim, S. & Nussbaum, M.A. (2011), "An EMG-based model to estimate lumbar muscle forces and spinal loads during complex, high-effort tasks: Development and application to residential construction using prefabricated walls", International Journal of Industrial Ergonomics, vol. 41 (5), pp. 437 - 446. [WWW] [ spine; validation; work place ergonomics; ]
* Jiang, X. (2011), "Biomechanical analysis of asymmetric and dynamic lifting task", Master's Thesis, New Jersey Institute of Technology, NJ,United States. [WWW] [ work place ergonomics; ]
* Juliussen, R.B.V. (2011), "Udvikling af computermodel til analyse af roning [Development of computer model for analysis of rowing]", Master's Thesis, Technical University of Denmark. [PDF] [ validation; sports; ]
* Jung, M., Kim, Y., Cho, K. & Lee, K. (2011), "A novel method to predict posture of human model when designing resistance training machines using musculoskeletal analysis", Presented at the American Society of Biomechanics Meeting, Gainesville, FL, pp. 2 pp.. [PDF] [ methods; sports; ]
* Kwan, M.M.S., Andersen, M.S., Cheng, C.-L., Tang, W.-T. & Rasmussen, J. (2011), "Investigation of high-speed badminton racket kinematics by motion capture", Sports Engineering, vol. 13 (2), pp. 57–63. [DOI] [ sports; ]
* Kwan, M.M.S. & Rasmussen, J. (2011), "Linking Badminton Racket Design and Performance through Motion Capture", CAME - Computer Aided Medical Engineering, vol. 1, pp. 13-19. [PDF] [ sports; ]
* Lund, M.E., Andersen, M.S., de Zee, M. & Rasmussen, J. (2011), "Functional Scaling of Musculoskeletal Models", Presented at the XXIIIrd Congress of the International Society of Biomechanics, ISB 2011, 3-7 July 2011, Brussels, Belgium, pp. 2 pp.. [PDF] [ validation; methods; ]
* Lund, M.E., de Zee, M. & Rasmussen, J. (2011), "Comparing calculated and measured curves in validation of musculoskeletal models", XIII International Symposium on Computer Simulation in Biomechanics, Leuven, Belgium, pp. 2 pp.. [PDF] [ validation; methods; ]
* Madeleine, P., Samani, A., de Zee, M. & Kersting, U.G. (2011), "Biomechanical assessments in sports and ergonomics", Theoretical Biomechanics, vol. ISBN: 978-953-307-851-9, pp. 335-360. [PDFDOI] [ methods; sports; work place ergonomics; ]
* Madeleine, P., Samani, A., de Zee, M. & Kersting, U.G. (2011), "Biomechanics of human movement", International Federation for Medical and Biological Engineering Proceedings, vol. 34, pp. 237–240. [DOI] [ sports; ]
* Moghadamab, M.N., Aminianb, K., Asgharia, M. & Parnianpour, M. (2011), "How well do the muscular synergies extracted via non-negative matrix factorisation explain the variation of torque at shoulder joint?", Computer Methods in Biomechanics and Biomedical Engineering (0), pp. 1-11. [DOIWWW] [ shoulder; methods; ]
* Olesen, C.G., Lund, M.E., Sloth, S., Heinen, F., Nedergaard, N.J. & de Zee, M. (2011), "Development of a musculoskeletal model for coffee-grinder design purposes", 3. årsmøde i Dansk Biomekanisk Selskab, pp. 1 p.. [PDF] [ validation; sports; ]
* Oosterwaal, M., Telfer, S., Tørholm Christensen, S., Carbes, S., van Rhijn, L., Macduff, R., Meijer, K. & Woodburn, J. (2011), "Generation of subject-specific, dynamic, multisegment ankle and foot models to improve orthotic design: a feasibility study", BMC Musculoskeletal Disorders, vol. 12 (1), pp. 256. [DOIWWW] [ ankle; foot; ]
* Paul, G. & Lee, W. (2011), "Interfacing Jack And Anybody: Towards Anthropometric Musculoskeletal Digital Human Modeling", , pp. 8 pp., 1st International Symposium on Digital Human Modelling, 14-16 June 2011, Université Claude Bernard, Lyon. . . [WWW] [ methods; ]
* Pontonnier, C., de Zee, M., Samani, A., Dumont, G. & Madeleine, P. (2011), "Meat cutting tasks analysis using 3D instrumented knife and motion capture", International Federation for Medical and Biological Engineering Proceedings, vol. 34, pp. 144–147. [DOI] [ upper extremity; spine; validation; work place ergonomics; ]
* Pontonnier, C., de Zee, M., Samani, A., Dumont, G. & Madeleine, P. (2011), "Trend validation of a musculoskeletal model with a workstation design parameter", XIII International Symposium on Computer Simulation in Biomechanics. [PDF] [ validation; ]
* Rasmussen, J. (2011), "Challenges in human body mechanics simulation", Procedia IUTAM, vol. 2, pp. 176-185. [DOI] [ methods; ]
* Rasmussen, J., Bichler, R., S., T., T., R., Wirix-Speetjens, R. & Dendorfer, S. (2011), "Subject-specific Musculoskeletal Simulation of Hip Dislocation Risk in Activities of Daily Living", Proceedings of the 2011 ORS Annual Meeting, vol. Long Beach, CA. [PDF] [ hip automotive; orthopedics; ]
* Rasmussen, J., Olesen, C.G., Lund, M.E., Andersen, M.S., Farahani, S.D. & de Zee, M. (2011), "Prediction of motion in musculoskeletal models", XIII International Symposium on Computer Simulation in Biomechanics. [PDF] [ methods; ]
* Ribeiro, A., Rasmussen, J., Flores, P. & Silva, L.F. (2011), "Modeling of the condyle elements within a biomechanical knee model", Multibody System Dynamics, pp. 1-17. [DOI] [ knee; ]
* Robie, B., Dendorfer, S., Rasmussen, J. & Tørholm, S. (2011), "Axial Rotation Requires Greatest Load in Multifidus Muscle - Potential Association with Low Back Pain?", 2011 Annual Meeting of the AANS/CNS Section on Disorders of the Spine and Peripheral Nerves, Phoenix, Arizona. [PDF] [ spine; orthopedics; ]
* Rohlmann, A., Han, K.-S., Zander, T. & Taylor, W.R. (2011), "A validated thoraco-lumbar spine model for prediction of muscle forces", Eurospine. [PDF] [ spine; validation; methods; ]
* Rohner, C. (2011), "Berechnung der Kniedynamik beim Gehen durch Nutzung von experimentell ermittelter passiver Kniesteifigkeit und simulierten Muskelkräften (In German) [Calculation of knee-dynamics during walking using experimentally determined passive knee stiffness and simulated muscle forces]", Master's Thesis, Zurich University of Applied Science, Switzerland. [ knee; orthopedics; ]
* Sabharwal, P. (2011), "A combined in-vivo/in-vitro approach to study knee injury mechanism", Master's Thesis, University of Waterloo, Canada. [WWW] [ knee; ]
* Sandholm, A., Schwartz, C., Pronost, N., de Zee, M., Voigt, M. & Thalmann, D. (2011), "Evaluation of a geometry-based knee joint compared to a planar knee joint", The visual computer, vol. 27 (2), pp. 161-171. [DOI] [ knee; gait; ]
* Schwarze, M., Welke, B., Seehaus, F., Oehler, S. & Hurscheler, C. (2011), "Validation of an inverse dynamic model: Loads at the prosthesis interface of above-knee amputees", In: Poster presented at the DGfB, 19-21 May 2011, Murnau (Germany),, pp. 1 p.. [PDF] [ lower extremity; validation; gait; rehab; ]
* Schwarze, M., Welke, B., Seehaus, F., Schmalz, T. & Hurschler, C. (2011), "Stress Resultants in Proximal Femur of Transfemural Amputees During Different Cases of Falling: A Multi-Body Simulation", , pp. 1 p., Poster presented at the DGfB Murnau May 2011, Germany . . [PDF] [ lower extremity; gait; rehab; ]
* Sørensen, K., de Zee, M. & Rasmussen, J. (2011), "A biomechanical analysis of clear strokes in badminton executed by youth players of different skill levels", Proceedings of the International Society of Biomechanics Conference 2011 Brussels. [PDF] [ sports; ]
* Taylor, P.R.P., Day, R.E., Nicholls, R.L., Rasmussen, J., Yates, P.J. & Stoffel, K.K. (2011), "The comminuted midshaft clavicle fracture: a biomechanical evaluation of plating methods", Clinical Biomechanics, vol. 26 (5), pp. 491–496. [DOI] [ upper extremity; trunk; orthopedics; ]
* Toh, J.J.Y., Kin, L. & Xie, W. (2011), "Investigation of the Moment of Inertia and the Biomechanical Internal Forces Acting on the Knee During Hiking", Portuguese Journal of Sport Sciences, vol. 11. [PDF] [ knee; sports; ]
* Voinescu, M., Soares, D., Castro, M., Mendes, E., Davidescu, A. & Machado, L. (2011), "A study of moments acting on the tibia during gait in the active elderly population", Portuguese Journal of Sport Sciences, vol. 11 (Suppl. 2) (1), pp. 575-578. [PDF] [ lower extremity; gait; orthopedics; sports; ]
* Wong, C., Rasmussen, J., Simonsen, E.B., Hansen, L., de Zee, M. & Dendorfer, S. (2011), "The Influence of Muscle Forces on the Stress Distribution in the Lumbar Spine", The Open Spine Journal, vol. 3, pp. 21–26. [DOI] [ spine; lumbar; FEA; ]
* Worsley, P. (2011), "Assessment of short-term knee arthroplasty function using clinical measures, motion analysis, and musculoskeletal modelling", Ph.D. Thesis, University of Southampton, United Kingdom. [WWW] [ knee; validation; gait; methods; orthopedics; ]
* Worsley, P., Stokes, M. & Taylor, M. (2011), "Predicted knee kinematics and kinetics during functional activities using motion capture and musculoskeletal modelling in healthy older people", Gait & Posture, vol. 33 (2), pp. 268-273. [DOI] [ leg; knee; gait; ]
* Wu, J.Z., Sinsel, E., Gloekler, D., Wimer, B., Zhao, K., An, K. & Buczek, F. (2011), "Joint loading of the thumb while operating a mechanical pipette - an inverse dynamics approach", In: ASB, pp. 2 pp.. [PDF] [ hand; work place ergonomics; ]
* Wu, J.Z., Sinsel, E.W., Gloekler, D.S., Wimer, B.M., Zhao, K.D., An, K.-N. & Buczek, F.L. (2011), "Inverse dynamic analysis of the biomechanics of the thumb while pipetting: A case study", Medical Engineering & Physics (0). [DOIWWW] [ hand; methods; work place ergonomics; ]
* Zander, T., Rohlmann, A., Dreischarf, M., Han, K.S. & Bergmann, G. (2011), "Impact of the Number of Artificial Discs on Spinal Balance", EuroSpine. [PDF] [ spine; orthopedics; ]
* Zhou, L., Bai, S., Hansen, M.R. & Rasmussen, J. (2011), "Modeling of Human Arm Energy Expenditure for Predicting Energy Optimal Trajectories", Modeling, Identification and Control (Online Edition), vol. 31 (3), pp. 91–101. [DOI] [ upper extremity; validation; methods; ]

2010

* Agarwal, P., Narayanan, M.S., Lee, L.-F., Mendel, F. & Krovi, V.N. (2010), "Simulation-Based Design of Exoskeletons Using Musculoskeletal Analysis", ASME Conference Proceedings, vol. 2010 (44113), pp. 1357-1364. [DOIWWW] [ upper extremity; rehab; exoskeleton; ]
* Alkjaer, T., Wieland, M.R., Andersen, M.S., Simonsen, E.B. & Rasmussen, J. (2010), "Musculoskeletal Modeling of a Forward Lunge Movement: Implications for ACL Loading", Journal of Athletic Training, vol. 45 (5), pp. 533–534. [ knee; sports; rehab; ]
* Andersen, M.S., Benoit, D.L., Damsgaard, M., Ramsey, D.K. & Rasmussen, J. (2010), "Do kinematic models reduce the effects of soft tissue artefacts in skin marker-based motion analysis? An in vivo study of knee kinematics", Journal of Biomechanics, vol. 43 (2), pp. 268-273. [DOI] [ knee; gait; methods; ]
* Andersen, M.S., Damsgaard, M., Macwilliams, B. & Rasmussen, J. (2010), "A computationally efficient optimisation-based method for parameter identification of kinematically determinate and over-determinate biomechanical systems", Computer Methods in Biomechanics and Biomedical Engineering, vol. 13 (2), pp. 171-83. [DOI] [ gait; methods; ]
* Andersen, M.S., Rasmussen, J., Ramsey, D.K. & Benoit, D.L. (2010), "Validation of knee joint models - an in vivo study", Proceedings of the 6th World Congress of Biomechanics, vol. 31, pp. 1288-1291. [PDF] [ knee; validation; ]
* Bresnahan, L., Fessler, R.G. & Natarajan, R.N. (2010), "Evaluation of change in muscle activity as a result of posterior lumbar spine surgery using a dynamic modeling system", Spine, vol. 35 (16), pp. E761–E767. [DOI] [ spine; validation; orthopedics; ]
* Carbes, S., Telfer, S. Tørholm Christensen.S., Woodburn, J., Oosterwaal, M. & Rasmussen, J. (2010), "A new multisegmental foot model and marker protocol for accurate simulation of the foot biomechanics during walking", ISB 2011 Brussels. [PDF] [ foot; methods; ]
* Chu, A. & Hughes, R.E. (2010), "A method to determine whether a musculoskeletal model can resist arbitrary external loadings within a prescribed range.", Comput Methods Biomech Biomed Engin, vol. 13 (6), pp. 795–802. [DOI] [ shoulder; methods; orthopedics; ]
* de Zee, M., Lund, M.E., Schwartz, C., Olesen, C.G. & Rasmussen, J. (2010), "Validation of musculoskeletal models: the importance of trend validations", IUTAM 2010, Leuven, Belgium, pp. 2 pp.. [PDF] [ knee; validation; seating; ]
* Dendorfer, S., Rasmussen, J., Tørholm Christensen, S. & Robie, B. (2010), "The Effect of Spinal Disc Herniation on Multifidus Muscles", Orthopaedic Research Society. Transactions of the Annual Meeting, vol. 56th Annual Meeting of the Orthopaedic Research Society. [ spine; lumbar; orthopedics; ]
* Grujicic, M., Arakere, G., Xie, X., LaBerge, M., Grujicic, A., Wagner, D. & Vallejo, A. (2010), "Design-optimization and material selection for a femoral-fracture fixation-plate implant", Materials & Design, vol. 31, pp. 3463-3473. [DOI] [ upper extremity; lower extremity; leg; FEA; orthopedics; ]
* Grujicic, M., Pandurangan, B., Xie, X., Gramopadhye, A., Wagner, D. & Ozen, M. (2010), "Musculoskeletal computational analysis of the influence of car-seat design/adjustments on long-distance driving fatigue", International Journal of Industrial Ergonomics, vol. 40 (3), pp. 345-355. [DOI] [ spine; seating; automotive; ]
* Kersting, U.G., Gurney, J.K., Lewis, S. & Rasmussen, J. (2010), "An individualized musculoskeletal model for the analysis of amputee running", Proceedings of the 28th Conference of the International Society of Biomechanics in Sports, ISBS, 19-23 July 2010, Marquette, MI, USA, pp. 142-144. [PDF] [ sports; rehab; ]
* Kurpiers, N. (2010), "Dynamics of freestyle skiing: equipment development and implications for injury prevention strategies", Ph.D. Thesis, The University of Auckland, New Zealand. [WWW] [ knee; sports; ]
* Kwan, M. (2010), "Designing the World’s Best Badminton Racket", Ph.D. Thesis, Aalborg University, Denmark. [PDF] [ sports; ]
* Kwan, M., Cheng, C.L., Tang, W.T. & Rasmussen, J. (2010), "Measurement of badminton racket deflection during a stroke", Sports Engineering, vol. 12 (3), pp. 143-153. [DOI] [ sports; ]
* Lund, M.E., Andersen, M.S. & Rasmussen, J. (2010), "Patient-specific optimized kinematic models of the leg", Presented at the 2nd Annual Meeting of the Danish Biomechanical Society, Aalborg, Denmark, pp. 1 p.. [PDF] [ lower extremity; methods; ]
* Ma, C. (2010), "Analysis of lower-limb muscle activities during whole body vibration with different standing postures", Biomedical Engineering and Informatics, vol. 5, pp. 1797 - 1801. [WWW] [ lower extremity; validation; ]
* Manders, C.J. (2010), "Combined musculoskeletal and finite element modelling of total hip replacement to account for surgical and patient related factors", Ph.D. Thesis, University of Southampton, United Kingdom. [WWW] [ hip gait; FEA; orthopedics; ]
* Meijer, K., Oomen, P., Rausch, J., Annegarn, J., Rasmussen, J. & Siebertz, K. (2010), "A comparison of two different strength scaling methods for multi body modeling", IUTAM 2010, Leuven, Belgium, pp. 2 pp.. [PDF] [ methods; ]
* Nakashima, M. & Komura, T. (2010), "An Analysis of Muscle Load on the Erector Spinae of a Pregnant Woman", Journal of Biomechanical Science and Engineering, vol. 5 (4), pp. 357-367. [DOIWWW] [ spine; validation; ]
* Nucibella, E. (2010), "Development of musculoskeletal model for biomechanical analysis of trans-tibial amputee gait", Master's Thesis, University of Padova, Italy. [PDF] [ lower extremity; gait; rehab; ]
* Olesen, C., de Zee, M. & Rasmussen, J. (2010), "Using a Computer Model to Bridge Published Experimental Seated Posture Results", Proceedings of the EPUAP 2010 Annual Conference. Birmingham, United Kingdom. [ seating; rehab; ]
* Phillips, C., Forrester, A.I.J., Purdue, A.I. & Stokes, M.J. (2010), "Optimisation of a bicycle chainring to aid in rehabilitation of athletes suffering from patellofemoral pain syndrome", 8th Conference of the International Sports Engineering Association (ISEA), vol. 2 (2), pp. 3151–3156. [DOI] [ sports; rehab; ]
* Purdue, A.I., Forrester, A.I.J., Stokes, M.J., Hansen, E.A. & Rasmussen, J. (2010), "Efficient human force transmission tailored for the individual cyclist", Proceedia Engineering, vol. 2 (2), pp. 2543–2548. [DOI] [ sports; ]
* Racine, J.-O. (2010), "Estimation de l'effet d'une force virtuelle sur les forces de contact lors de la transition assis-debout (In French) [Estimating the effect of a virtual force contact during the transition seated-upright]", Master's Thesis, Université du Québec, Canada. [WWW] [ hip knee; rehab; ]
* Rasmussen, J., Andersen, M.S., Bichler, R., Carbes, S. & de Zee, M. (2010), "Hip Joint Kinematics in Activities of Daily Living", Journal of Biomechanics, vol. 43, pp. 25. [DOI] [ hip methods; automotive; orthopedics; ]
* Rasmussen, J. & de Zee, M. (2010), "Computational investigation of two interventions for neck and upper extremity pain in office workers", World Congress of Biomechanics 2010, Singapore, pp. 4 pp.. [PDF] [ upper extremity; spine; work place ergonomics; ]
* Saraswat, P. (2010), "Foot model for clinical application", Ph.D. Thesis, The University of Utah, UT, United States. [PDF] [ foot; gait; orthopedics; ]
* Saraswat, P., Andersen, M.S. & Macwilliams, B.A. (2010), "A musculoskeletal foot model for clinical gait analysis", Journal of Biomechanics, vol. 43 (9), pp. 1645–1652. [DOI] [ leg; foot; validation; gait; methods; ]
* Schwartz, C., Lund, M.E., de Zee, M. & Rasmussen, J. (2010), "Prediction of knee loads using a lower extremity model based on the Klein Horsman data set", In: Proceedings of the ASME [American Society of Mechanical Engineers] 2010 Summer Bioengineering Conference, pp. 2 pp.. [PDF] [ leg; validation; ]
* Si, W., zhi Yan, Z., Li, Y. & peng Liu, S. (2010), "The Crouch Start Modeling and Simulation Based on AnyBody Technology", JDCTA: International Journal of Digital Content Technology and its Applications, vol. 4 (8), pp. 8-14. [WWW] [ sports; ]
* Wagner, D.W., Divringi, K., Ozcan, C., Grujicic, M., Pandurangan, B. & Grujicic, A. (2010), "Combined musculoskeletal dynamics/structural finite element analysis of femur physiological loads during walking", Multidiscipline Modeling in Materials and Structures, vol. 6 (4), pp. 417 - 437. [WWW] [ lower extremity; gait; FEA; orthopedics; ]
* Weber, T. (2010), "Functional outcome of navigated minimally invasive total hip endoprosthesis using muculoskeletal modeling", Master's Thesis, University of Applied Science Regensburg, GermanyGermany. [PDF] [ hip gait; orthopedics; ]
* Wehner, T., Claes, L., Niemeyer, F., Nolte, D. & Simon, U. (2010), "Influence of the fixation stability on the healing time — A numerical study of a patient-specific fracture healing process", Clinical Biomechanics, vol. 25, pp. 606–612. [DOI] [ FEA; orthopedics; ]
* Wehner, T., Wolfram, U., Henzler, T., Niemeyer, F., Claes, L. & Simon, U. (2010), "Internal forces and moments in the femur of the rat during gait", Journal of Biomechanics, vol. 43 (13), pp. 2473–2479. [DOI] [ lower extremity; sensitivity analysis; animal; orthopedics; ]
* Welke, B., Hurschler, C., Windhagen, H., Calließ, T., Schwarze, M., Oehler, S., Mücke, S., Kraft, M. & Seehaus, F. (2010), "Validierung einer muskuloskelettalen Mehrkörpersimulation zur Ermittlung der Belastungen im Bereich der transfemuralen osseofixierten Endo-Exo-Prothese während des Gehens [Validation of a musculoskeletal multi-body simulation to determine the stresses in the transfemuralen osseofixierten Endo-Exo prosthesis during walking]", BMT 2010, 44. DGBMT Jahrestagung, Rostock, Germany. [PDFWWW] [ lower extremity; validation; rehab; ]
* Worsley, P., Stokes, M. & Taylor, M. (2010), "Comparison of Osteoarthritic Knee Kinematics and Kinetics with Age Matched Healthy Individuals", Journal of Biomechanics, pp. S29. [WWW] [ knee; orthopedics; ]
* Worsley, P., Taylor, M. & Stokes, M. (2010), "Robustness of optimised motion capture and musculoskeletal modelling of Gait", 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain. [PDF] [ gait; ]
* Wu, J.Z., An, K.N., Cutlip, R.G. & Dong, R.G. (2010), "A practical biomechanical model of the index finger simulating the kinematics of the muscle/tendon excursions", Bio-Medical Materials and Engineering, vol. 20 (2), pp. 89-97. [DOI] [ arm; hand; validation; momentarm; ]
* Xie, X. (2010), "Combined musculo-skeletal multi-body dynamics/finite element analysis of several ergonomics and bio-mechanics problems", Master's Thesis, Clemson University, SC, United States. [WWW] [ FEA; automotive; orthopedics; ]

2009

* Andersen, M.S. (2009), "Kinematically Over-determinate Musculoskeletal Systems", Ph.D. Thesis, Aalborg University, Denmark. [PDF] [ lower extremity; validation; gait; methods; ]
* Andersen, M.S., Damsgaard, M. & Rasmussen, J. (2009), "Kinematic analysis of over-determinate biomechanical systems", Computer Methods in Biomechanics and Biomedical Engineering, vol. 12 (4), pp. 371-384. [DOI] [ gait; methods; ]
* Andersen, M.S., de Zee, M., Dendorfer, S., MacWilliams, B. & Rasmussen, J. (2009), "Validation of a detailed lower extremity model based on the Klein Horsman data set", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 27-28, TGCS. [PDF] [ lower extremity; validation; ]
* Chang, C.Y., Rupp, J.D., Reed, M.P., Hughes, R.E. & Schneider, L.W. (2009), "Predicting the Effects of Muscle Activation on Knee, Thigh, and Hip Injuries in Frontal Crashes Using a Finite-Element Model with Muscle Forces from Subject Testing and Musculoskeletal Modeling", Stapp Car Crash Journal, vol. 53, pp. 291-328. [ lower extremity; hip knee; validation; FEA; automotive; ]
* Chao, M., Ming, Z., lin, Z.C., xiang, L.Z. & xin, Y.J. (2009), "Analysis of Human Joint Forces in Standing Posture", Journal of Beijing Institute of Technology. [WWW] [ lower extremity; ]
* Chia-Yuan, C. (2009), "Prediction of the Effects of Lower-extremity Muscle Forces on Knee, Thigh, and Hip Injuries in Frontal Motor Vehicle Crashes. and Hip Injuries in Frontal Motor Vehicle Crashes", Ph.D. Thesis, University of Michigan. [WWW] [ lower extremity; automotive; ]
* de Zee, M., Cattaneo, P.M., Svensson, P., Pedersen, T.K., Melsen, B., Rasmussen, J. & Dalstra, M. (2009), "Prediction of the articular eminence shape in a patient with unilateral hypoplasia of the right mandibular ramus before and after distraction osteogenesis-A simulation study", Journal of biomechanics, vol. 42 (8), pp. 1049–1053. [DOI] [ mandible; validation; orthopedics; ]
* de Zee, M., Mikkelsen, P., Wong, C., Simonsen, E.B. & Rasmussen, J. (2009), "The Influence of the Center of Rotation on Facet Joint Loading and End Plate Loading Investigated with Musculoskeletal Simulation", Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1 p.. [PDF] [ spine; ]
* de Zee, M. & Rasmussen, J. (2009), "Using musculoskeletal modeling for estimating the most important muscular output: force", 3D Physiological Human Workshop, 3DPH, Zermatt, Switzerland. 29. November - 02. December, pp. 62-70. [DOI] [ methods; ]
* Eltoukhy, M. & Asfour, S. (2009), "Implementation and validation of a detailed three dimensional inverse dynamics lower extremity model for gait analysis applications", Proceedings of the XXIst Annual International Occupational Ergonomics and Safety Conference, Dallas, Texas, pp. 57-62. [ lower extremity; hip knee; validation; gait; ]
* Fukui, H., Sakamoto, J., Murakami, H., Oda, J., Tomita, K. & Higaki, H. (2009), "Biomechanical Analysis of Influence of Spinal Fixation on Intervertebral Joint Force by Using Musculoskeletal Model", 13th International Conference on Biomedical Engineering IFMBE Proceedings, pp. 1712-1715, IFMBE. [DOI] [ spine; orthopedics; ]
* Grujicic, M., Pandurangan, B., Arakere, G., Bell, W.C., He, T. & Xie, X. (2009), "Seat-cushion and Soft-tissue Material Modeling and a Finite Element Investigation of the Seating Comfort for Passenger-vehicle Occupants", Materials and Design, vol. 30, pp. 4273-4285. [DOI] [ seating; methods; FEA; automotive; ]
* Hansen, E.A., Jensen, K., Hallen, J., Rasmussen, J. & Pedersen, P.K. (2009), "Effect of chain wheel shape on crank torque, freely chosen pedal rate, and physiological responses during submaximal cycling", Journal of Physiological Anthropology, vol. 28 (6), pp. 261–267. [PDFDOI] [ sports; ]
* Jung, M., Cho, H., Roh, T. & Lee, K. (2009), "Integrated framework for vehicle interior design using digital human model", Journal of Computer Science and Technology, vol. 24(6), pp. 1149-1161. [DOI] [ methods; automotive; ]
* Kersting, U.G. & de Zee, M. (2009), "Reflex responses and ankle joint loading during perturbed turning movements.", Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1 p.. [PDF] [ ankle; ]
* Kim, S.H. & Lee, K. (2009), "Development of discomfort evaluation method for car ingress motion", International Journal of Automotive Technology, vol. 10 (5), pp. 619-627. [DOI] [ methods; automotive; ]
* Koller, T., Brodie, M., Litzenberger, S. & Sabo, A. (2009), "Biomechanische Bewegungs- und Belastungsanalyse im modernen Skisport mittels Mehrkörpersimulation in AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] [ sports; ]
* Lee, L.-F., Narayanan, M.S., Kannan, S., Mendel, F. & Krovi, V.N. (2009), "Case studies of musculoskeletal-simulation-based rehabilitation program evaluation", Trans. Rob., vol. 25 (3), pp. 634-638. [DOI] [ upper extremity; rehab; ]
* Manders, C. & New, A. (2009), "Effect of Surgical Approach on Femoral Strain Distribution after Total Hip Replacement", 55th Annual Meeting of the Orthopaedic Research Society. [PDF] [ hip FEA; orthopedics; ]
* Ohlsson, M.L. (2009), "New methods for movement technique development in cross-country skiing using mathematical models and simulation", Ph.D. Thesis, Mid Sweden University, Sweden. [WWW] [ validation; methods; sports; ]
* Olesen, C.G., Andersen, M.S., Rathleff, M.S., de Zee, M. & Rasmussen, J. (2009), "Understanding the biomechanics of medial tibial stress syndrome - a simulation study using a musculoskeletal model", Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1 p.. [PDF] [ lower extremity; rehab; ]
* Olesen, C.G., de Zee, M. & Rasmussen, J. (2009), "Experimental Validation of a Computational Human Seating Model", Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1 p.. [PDF] [ validation; seating; ]
* Parasuraman, S. (2009), "Bio-Mechanical Analysis of Human Hand", Computer and Automation Engineering, 2009. International Conference, pp. 93 - 97. [WWW] [ hand; rehab; ]
* Parasuraman, S. (2009), "Human upper limb and arm kinematics for robot based rehabilitation", Advanced Intelligent Mechatronics, 2009. AIM 2009. IEEE/ASME International Conference, pp. 845 - 850. [WWW] [ upper extremity; rehab; exoskeleton; ]
* Rasmussen, J., Carbes, S. & Gomaa, S.T. (2009), "A computational model of a reverse shoulder joint prosthesis", Presented at the Symposium on Computational Methods in Orthopaedic Biomechanics (Pre-ORS), Las Vegas, 2009, pp. 1 p.. [PDF] [ shoulder; orthopedics; ]
* Rasmussen, J., de Zee, M. & Carbes, S. (2009), "Validation of a biomechanical model of the lumbar spine.", Proceedings of the International Society of Biomechanics 2009 Congress XXII, Cape Town, South Africa, pp. 1 p.. [PDF] [ spine; validation; ]
* Rasmussen, J., de Zee, M., Dahl, J. & Damsgaard, M. (2009), "Salient properties of a combined minimum fatigue and quadratic muscle recruitment criterion", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 13-14. [PDF] [ methods; ]
* Rasmussen, J., Tørholm Christensen, S. & de Zee, M. (2009), "Computational analysis of the influence of seat pan inclination and friction on muscle activity and spinal joint forces", International Journal of Industrial Ergonomics, vol. 39, pp. 52-57. [DOI] [ spine; seating; ]
* Sakamoto, J., Fukui, H., Minowa, T., Murakami, H., Kawahara, N. & Tomita, K. (2009), "Mechanical analysis of spine with kyphosis due to compression fracture of osteoporotic vertebra", In: Proceedings of the 12th International Symposium on Computer Simulation in Biomechanics, Cape Town, South Africa, 2 – 4 July 2009, pp. 19-20, International Society of Biomechanics - Technical Group on Computer Simulation (TGCS). [PDF] [ spine; orthopedics; ]
* Sakamoto, J., Nakada, Y. & Murakami, H. (2009), "Musculoskeletal Analysis of Spine with Kyphosis Due to Compression Fracture of an Osteoporotic Vertebra", 13th International Conference on Biomedical Engineering IFMBE Proceedings, vol. 23 (5), pp. 1588-1591. [DOI] [ spine; orthopedics; ]
* Schwirtz, A., Bichler, R. & Kaiser, R. (2009), "Method for biomechanical evaluation of the ingress and egress motion", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] [ automotive; ]
* Sellgren, U. & Söderberg, A. (2009), "Robust brake feel deign", Proc. Nafems World Congress 09, June 16-19, 2009, Crete, Greece. [WWW] [ automotive; ]
* Siebertz, K. & Rausch, J. (2009), "Computer aided ergonomics case study: Vehicle brake system", Presented at the ANSYS Conference & 27th.CADFEM Users' Meeting, pp. 12 pp.. [PDF] [ automotive; ]
* Thielen, T., Maas, S., Zürbes, A., Waldmann, D. & Kelm, J. (2009), "Entwicklung einer Hüftinterimsprothese (Spacer) mittels FE-Analyse unter Berücksichtigung der Muskel- und Gelenkkräfte aus AnyBody [Development of a hip interim prosthesis (spacer) using finite element analysis taking into account the muscle and joint forces from AnyBody]", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] [ hip validation; orthopedics; ]
* Wehner, T., Claes, L. & Simon, U. (2009), "Internal loads in the human tibia during gait.", Clinical Biomechanics, vol. 24 (3), pp. 299-302. [DOI] [ gait; orthopedics; ]
* Worsley, P., Warner, M., Delaney, S., Stokes, M. & Taylor, M. (2009), "The application of ultrasound imaging in the musculoskeletal modeling process", 55th Annual Meeting of the Orthopaedic Research Society, February 22-25, 2009, vol. Las Vegas, Nevada, pp. 1501-1501. [PDF] [ methods; ]
* Wu, J.Z., An, K.-N., Cutlip, R.G., Andrew, M.E. & Dong, R.G. (2009), "Modeling of the muscle/tendon excursions and moment arms in the thumb using the commercial software anybody", Journal of Biomechanics, vol. 42 (3), pp. 383–388. [DOI] [ arm; hand; validation; momentarm; ]
* Wu, J.Z., Chiou, S.S. & Pan, C.S. (2009), "Analysis of Musculoskeletal Loadings in Lower Limbs During Stilts Walking in Occupational Activity", Annals of Biomedical Engineering, vol. 37 (6), pp. 1177–1189. [DOI] [ lower extremity; hip knee; ankle; work place ergonomics; exoskeleton; ]
* Wu, J.Z., Li, Z., Cutlip, R.G. & An, K. (2009), "A simulating analysis of the effects of increased joint stiffness on muscle loading in a thumb", BioMedical Engineering OnLine, vol. 8, pp. 41. [DOI] [ hand; ]
* Wyss, C. (2009), "Muscle Modelling mit AnyBody", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] [ foot; FEA; ]
* Wyss, C., Roethlisberger, M. & Gerber, H. (2009), "Intraarticular and muscle force reactions of the leg using different insoles", In: Proceedings of the ESB 2009 Workshop, June 7-9, 2009, Zürich, Switzerland, pp. 1 p.. [PDF] [ lower extremity; gait; rehab; ]
* Zander, T., Rohlmann, A. & Bergmann, G. (2009), "How important is the correct placement of artificial discs?", ANSYS Conference & 27th.CADFEM Users’ Meeting. [PDF] [ spine; orthopedics; ]

2008

* Arakilo, M. (2008), "Joint forces within the ankle during level walking", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] [ ankle; gait; ]
* Dubowsky, S.R. (2008), "Multibody computational biomechanical model of the upper body", Ph.D. Thesis, Rutgers, The State University of New Jersey, NJ, United States. [WWW] [ shoulder; validation; rehab; ]
* Dubowsky, S.R., Rasmussen, J., Sisto, S.A. & Langrana, N.A. (2008), "Validation of a musculoskeletal model of wheelchair propulsion and its application to minimizing shoulder joint forces", Journal of Biomechanics, vol. 41 (14), pp. 2981–2988. [DOI] [ shoulder; validation; rehab; ]
* Duffett, G.A., Badillo, H., Carbes, S. & Kiis, A. (2008), "Design and Optimization for Human Well-Being and Overall System Performance", Presented at the modeFrontier User Meeting 2008, 14-15 October 2008, Trieste, Italy, pp. 13 pp.. [PDF] [ methods; ]
* Finley, J.M., Perreault, E.J. & Dhaher, Y.Y. (2008), "Stretch reflex coupling between the hip and knee: implications for impaired gait following stroke", Experimental Brain Research, vol. 188, pp. 529-540. [PDF] [ hip knee; gait; ]
* Fritz, N.M. (2008), "Musculoskeletal Model, Countermeasure and Bone Analysis for Astronauts", ANSYS Conference & 26th. CADFEM Users’ Meeting. [PDF] [ aerospace; ]
* Holmberg, J. (2008), "Computational biomechanics in cross-country skiing", Master's Thesis, Linköping University, Sweden. [WWW] [ sports; ]
* Holmberg, L.J. & Lund., A.M. (2008), "A musculoskeletal full-body simulation of cross-country skiing", Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, vol. 222, pp. 11-22. [DOI] [ sports; ]
* Kannan, S. (2008), "Quantitative Analysis of Masticatory Performance in Vertebrates", Master's Thesis, State University of New York at Buffalo, NY, United States. [WWW] [ mandible; animal; ]
* Manders, C., New, A. & Rasmussen., J. (2008), "Validation of musculoskeletal gait simulation for use in investigation of total hip replacement", Journal of Biomechanics, vol. S41, pp. S488. [PDFDOI] [ hip validation; gait; orthopedics; ]
* Narayanan, M.S., Kannan, S., Lee, L.-F., Mendel, F. & Krovi, V.N. (2008), "Virtual musculoskeletal scenario-testing case-studies", Virtual Rehabilitation, pp. 150 - 156. [WWW] [ methods; ]
* Nolte, A., Augat, P. & Rasmussen, J. (2008), "Analysis of the muscle and joint forces in the shoulder joint using the AnyBody simulation model", ANSYS Conference & 26th.CADFEM Users’ Meeting, vol. 41 (1), pp. 492. [PDFDOI] [ shoulder; validation; ]
* Nolte, A., Augat, P. & Rasmussen, J. (2008), "Analysis of the muscle and joint forces in the shoulder joint using the AnyBody simulation model", Poster presented at the ESB2008 conference, Luzern, Switzerland, pp. 1 p.. [PDF] [ shoulder; validation; ]
* Rasmussen, J. (2008), "Prediction of human posture and movement by musculoskeletal optimization - or Can AnyBody do the Limbo?", Poster presented at the ASME 2008 summer bioengineering conference, Marco Island, Florida, June 29-29, pp. 1 p.. [PDF] [ methods; ]
* Rasmussen, J. & de Zee, M. (2008), "Design Optimization of Airline Seats", SAE International Journal of Passenger Cars - electronic and electrical systems, vol. 1 (1), pp. 580-584. [DOI] [ seating; aerospace; ]
* Rose, M. (2008), "Biomechanical Analysis of Anterior Cruciate Ligament Injury Mechanisms", Master's Thesis, Aalborg University, Denmark. [PDF] [ knee; gait; ]
* Siebertz, K. & Rausch, J. (2008), "The AnyBody Car Driver Model, a CAE tool to evaluate comfort", Conference article from FISITA. [WWW] [ validation; automotive; ]
* Simon, U., Niemeyer, F., Claes, L. & Wehner, T. (2008), "Patient specific fracture healing simulation", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] [ lower extremity; orthopedics; ]
* Simon, U., Wehner, T., Cosgun, I., Henzler, T., Claes, L. & Wolfram, U. (2008), "Musculoskeletal model for the rat hind limb", ANSYS Conference & 29th.CADFEM Users’ Meeting. [PDF] [ lower extremity; animal; ]
* Wu, J.Z., An, K.-N., Cutlip, R.G., Krajnak, K., Welcome, D. & Dong, R.G. (2008), "Analysis of musculoskeletal loading in an index finger during tapping", Journal of Biomechanics, vol. 41 (3), pp. 668-676. [DOI] [ hand; validation; work place ergonomics; ]
* Wu, J.Z., Chiou, S.S. & Pan, C.S. (2008), "Analysis of the effects of stilts walking on musculoskeletal loading in low extremities", poster presented at the NACOB2008 conference, Ann Arbor, MI, pp. 1 p.. [PDF] [ lower extremity; work place ergonomics; exoskeleton; ]

2007

* Andersen, M.S., Alkjær, T., Rasmussen, J. & Damsgaard, M. (2007), "Marker Position Determination and Kinematic Analysis of a Patient-specific Lunge Model", International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1 p.. [PDF] [ lower extremity; methods; ]
* Collet, Y., Rasmussen, J., Nuño, N., Tétrault, P. & Hagemeister, N. (2007), "Computational Modeling of the shoulder and improvement of a new prosthetic design for massive rotator cuff tears: our experience with the AnyBody Modeling System", Proceedings of the 18th IASTED International Conference on Modelling and Simulation - MS 2007. / R. Wamkeue (ed.) IASTED, pp. 624 - 627. [WWW] [ shoulder; orthopedics; ]
* de Zee, M., Dalstra, M., Cattaneo, P.M., Rasmussen, J., Svensson, P. & Melsen, B. (2007), "Validation of a musculo-skeletal model of the mandible and its application to mandibular distraction osteogenesis", Journal of Biomechanics, vol. 40 (6), pp. 1192–1201. [DOI] [ mandible; validation; methods; orthopedics; ]
* de Zee, M., Falla, D., Farina, D. & Rasmussen, J. (2007), "A detailed rigid-body cervical spine model based on inverse dynamics", Journal of Biomechanics, vol. 40 (2), pp. S284. [DOI] [ spine; cervical; methods; ]
* de Zee, M., Falla, D., Farina, D. & Rasmussen, J. (2007), "Simulation of pain-induced alterations in cervical motor control", Poster presented at the World Congress on Neck Pain. January 20-22, Los Angeles, California, USA, pp. 1 p.. [PDF] [ spine; ]
* de Zee, M., Falla, D., Farina, D. & Rasmussen, J. (2007), "Prediction of neuromuscular adaptation of experimentally induced neck pain using a musculoskeletal model", In: Presented at the 2007 XIth International Symposium on Computer Simulation in Biomechanics. Tainan, Taiwan, pp. 2 pp.. [PDF] [ spine; ]
* de Zee, M., Hansen, L., Wong, C., Rasmussen, J. & Simonsen, E.B. (2007), "A generic detailed rigid-body lumbar spine model", Journal of Biomechanics, vol. 40 (6), pp. 1219-1227. [DOI] [ spine; validation; ]
* Gielo-Perczak, K. & Rasmussen, J. (2007), "Biomechanical modeling of the shoulder anatomy", Biomechanics in Ergonomics, Second Edition, pp. 395-404. [ shoulder; work place ergonomics; ]
* Haahr, J. (2007), "Planning and conduction of a validation experiment - Simulation of driving situations in a Ford vehicle", Master's Thesis, Aalborg University, Denmark. [PDF] [ validation; automotive; ]
* Karlsson, D., Osvalder, A.-L. & Rasmussen, J. (2007), "Towards better seating design – a discussion and comparison between office chairs and car seats", Nordic Ergonomics Society Conference 2007, Lysekil, Sweden, pp. 6 pp.. [PDF] [ seating; work place ergonomics; ]
* Manders, C., New, A. & Rasmussen, J. (2007), "Validation of Hip Joint Force Simulation by Gait Analysis", ANSYS Conference & 25th.CADFEM Users’ Meeting. [PDF] [ hip validation; gait; ]
* Nakashima, M. & Motegi, Y. (2007), "Development of a Full-Body Musculoskeletal Simulator for Swimming", In: Proceedings of the 2007 International Symposium on Computer Simulation in Biomechanics (ISCSB2007), pp. 59-60. [PDF] [ validation; methods; sports; ]
* Nolte, A. (2007), "Untersuchung der Muskel- und Gelenkkräfte im Schultergelenk mithilfe eines Simulationsmodells der Software AnyBody (In German) [Investigation of the muscle- and joint forces in the shoulder joint using AnyBody software]", Master's Thesis, Unfallklinik Murnau, Germany and Paracelsus Medizinischen Privatuniversität Salzburg, Austria. [PDF] [ shoulder; validation; ]
* Rasmussen, J. (2007), "AnyBody: CAE for the human body", ANSYS Conference & 25th.CADFEM Users’ Meeting, CADFEM GmbH. [PDF] [ methods; ]
* Rasmussen, J., de Zee, M. & Tørholm Christensen, S. (2007), "Muscle Relaxation and Shear Force Reduction may be Conflicting: a computational model of seating", SAE Technical Paper 2007-01-2456, vol. SAE Congress: Digital Human Modeling for Design and Engineering (DHM), pp. Seattle, WA. [DOI] [ seating; automotive; ]
* Rasmussen, J., de Zee, M., Tørholm Christensen, S. & Damsgaard, M. (2007), "Comparison of a musculoskeletal shoulder model with in-vivo joint forces", Presented at the International Society of Biomechanics 11th congress, Taipei, Taiwan, pp. 1 p.. [PDFDOI] [ shoulder; validation; ]
* Renner, S. (2007), "Determination of muscle forces acting on the femur and stress analysis", Master's Thesis, Technische Universität München, Germany. [PDF] [ lower extremity; hip validation; gait; FEA; ]
* Sullivan, S.R., Langrana, N.A. & Sisto, S.A. (2007), "Shoulder mechanics: analytical modeling and validation", In: Presentation at the American Soc. of Biomechanics Annual Meeting, pp. 2 pp.. [PDF] [ shoulder; validation; ]
* Wagner, D., Rasmussen, J. & Reed, M. (2007), "Assessing the Importance of Motion Dynamics for Ergonomic Analysis of Manual Materials Handling Tasks using the AnyBody Modeling System", SAE Technical Paper 2007-01-2504, vol. SAE Congress: Digital Human Modeling for Design and Engineering (DHM) (6), pp. Seattle, WA. [DOIWWW] [ spine; work place ergonomics; ]
* Wilssens, J. & Hagman, F. (2007), "From High Speed Plantar Pressure Measurement to Lower Limb Skeletal Motion", 8th Biennial Footwear Biomechanics Symposium, June 27-29, 2007, National Yang Ming University, Taipei, Taiwan, pp. 2 pp.. [PDF] [ foot; methods; ]

2006

* Andersen, M.S., Damsgaard, M. & Rasmussen, J. (2006), "Marker-Based Motion Reconstruction of Constrained Rigid-Segment Systems", Presented at the 9th International Symposium on the 3-D Analysis of Human Movement, 28-30 June, Valenciennes, France, pp. 4 pp.. [PDF] [ methods; ]
* Andre, A., Carbes, S. & Ruiz, J.L. (2006), "Development of a computer model of the thoracic human spine with an aim to investigate loss of stability in scoliosis", Master's Thesis, Aalborg University, Denmark. [PDF] [ spine; orthopedics; ]
* Annegarn, J. (2006), "Scaling in human simulation models. The development of an isometric strength scaling method which needs easy accessible data only", Master's Thesis, Maastricht University, The Netherlands. [ methods; ]
* Annegarn, J., Rasmussen, J., Savelberg, H.H.C.M., Verdijk, L.B. & Meijer, K. (2006), "Scaling strength in human simulation models", 11th Symposium of the Flemish Society of Kinesiology, 20th September 2006, University Antwerp, pp. 1 p.. [PDF] [ validation; methods; ]
* Damsgaard, M., Rasmussen, J., Tørholm Christensen, S., Surma, E. & de Zee, M. (2006), "Analysis of musculoskeletal systems in the AnyBody Modeling System", Simulation Modelling Practice and Theory, vol. 14, pp. 1100-1111. [DOI] [ methods; ]
* Hansen, L., de Zee, M., Rasmussen, J., Andersen, T.B., Wong, C. & Simonsen, E.B. (2006), "Anatomy and biomechanics of the back muscles in the lumbar spine with reference to biomechanical modeling", Spine, vol. 31 (17), pp. 1888–1899. [DOI] [ spine; methods; ]
* de Jong, P. (2006), "Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence", Master's Thesis, Eindhoven University of Technology, The Netherlands. [PDF] [ validation; sports; ]
* de Jong, P., de Zee, M., Hilbers, P.A.J., Savelberg, H.H.C.M., van de Vosse, F.N., Wagemakers, A. & Meijer, K. (2006), "Multi-body modelling of recumbent cycling: An optimisation of configuration and cadence", Poster presented at the 11th Symposium of the Flemish Society of Kinesiology, Antwerp, Belgium, pp. 1 p.. [PDF] [ validation; ]
* Lee, L.-F. & Krovi, V.N. (2006), "Musculoskeletal simulation based optimization of rehabilitation program", 2006 International Workshop on Virtual Rehabilitation, pp. 36-41. [DOI] [ rehab; ]
* Rasmussen, J., de Zee, M., Damsgaard, M., Tørholm Christensen, S. & Andersen, M.S. (2006), "Musculoskeletal simulation of orthopedic surgical procedures", In: Miller, K. & Poulikakos, D. (Ed): Poster presented at the Workshop Proceedings of Computational Biomechanics for Medicine. MICCAI 2006, Copenhagen, Denmark, pp. 126-38. [PDF] [ methods; orthopedics; ]
* Rasmussen, J., Tørholm Christensen, S. & Damsgaard, M. (2006), "Synthesis of natural movements by inverse dynamics musculoskeletal modelling", Journal of Biomechanics, vol. 39, pp. S45. [ methods; ]
* Rasmussen, J., Tørholm Christensen, S., Siebertz, K. & Rausch, J. (2006), "Posture and Movement Prediction by Means of Musculoskeletal Optimization", SAE Technical Paper 2006-01-2342. [ methods; automotive; ]
* Rausch, J., Siebertz, K., Tørholm Christensen, S. & Rasmussen, J. (2006), "Simulation des menschlichen Bewegungsapparates zur Innenraum-gestaltung von Fahrzeugen (in German) [Simulation of the human musculoskeletal system for vehicle interior design]", VDI Bericht, vol. 1967 (2), pp. 1027 - 1048. [PDF] [ methods; automotive; ]
* Signore, M.J.D. (2006), "A Screw-Theoretic Framework for Musculoskeletal System Modeling and Analysis", Master's Thesis, State University of New York at Buffalo, NY, United States. [PDF] [ mandible; methods; FEA; animal; ]
* Svensson, I., Jeppesen, S. & Segerström, Å. (2006), "Use of inclinometers for measuring postures and movements in order to predict muscle activity", Journal of Biomechanics, vol. 39:Supplement 1, pp. 93. [WWW] [ validation; methods; ]
* Vondrak, V., Dostál, Z., Rasmussen, J. & Damsgaard, M. (2006), "The algorithms of mathematical programming in muscle recruitment and muscle wrapping problems", III European Conference on Computational Mechanics. [DOIWWW] [ methods; ]

2005

* de Zee, M., Rasmussen, J., Lem, J. & Siebertz, K. (2005), "Computer Simulations of the Active Motion System with Musculo-skeletal Models", SAE Technical Paper 2005-01-2705, vol. In press, pp. 272-278. [DOI] [ seating; automotive; ]
* Konakanchi, K. (2005), "Musculo-skeletal Modeling of Smilodon fatalis for virtual functional performance testing", Master's Thesis, State University of New York at Buffalo, NY, United States. [PDF] [ mandible; animal; ]
* Lund, M. (2005), "Biomechanical study of cross-country skiing", Master's Thesis, Umeå University, Sweden. [PDF] [ shoulder; sports; ]
* Perreault, E. & Viant, T. (2005), "Neural Coordination of Multijoint Stretch Reflexes in the Human Arm", Engineering in Medicine and Biology Society, 2005. IEEE-EMBS 2005, vol. 27th Annual International Conference, pp. 4389 - 4392. [DOIWWW] [ upper extremity; sensitivity analysis; ]
* Rasmussen, J., Damsgaard, M., Tørholm Christensen, S. & de Zee, M. (2005), "AnyBody - decoding the human musculoskeletal system by computational mechanics", Skallerud, B. & Andersson, H.I. (Ed): Konferanse i beregningsorientert mekanikk (computational mechanics). Trondheim, Norway, pp. 43-59. [PDF] [ methods; automotive; sports; rehab; ]
* Rasmussen, J., Damsgaard, M., Tørholm Christensen, S. & Kiis, A. (2005), "Computer-Aided Ergonomics - a new chapter in CAE?", ANSYS Conference & 23rd.CADFEM Users’ Meeting. [PDF] [ methods; ]
* Rasmussen, J., de Zee, M., Damsgaard, M. & Tørholm Christensen, S. (2005), "Ergonomic Optimization of a Bicycle Crank Based on Musculoskeletal Modeling", 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2 pp.. [PDF] [ methods; sports; ]
* Rasmussen, J., de Zee, M., Damsgaard, M., Tørholm Christensen, S., Marek, C. & Siebertz, K. (2005), "A General Method for Scaling Musculo-Skeletal Models", 2005 International Symposium on Computer Simulation in Biomechanics, Cleveland, Ohio, USA, pp. 2 pp.. [PDF] [ methods; automotive; ]
* Rasmussen, J. & Tørholm Christensen, S. (2005), "Musculoskeletal Modeling of Egress with the AnyBody Modeling System", SAE Technical Paper 2005-01-272, pp. 822-828. [DOI] [ methods; automotive; ]
* Rasmussen, J., Tørholm Christensen, S., Damsgaard, M. & de Zee, M. (2005), "Ergonomic optimization of a spring-loaded bicycle crank", In: 6th World Congress on Structural and Multidisciplinary Optimization. Rio de Janeiro, Brazil, pp. 8 pp.. [PDF] [ sports; rehab; ]
* Schaerer, C. (2005), "Muskuloskeletale Belastung und Beanspruchung des Femurs waehrend des Gangzyklus: Entwicklung und Vergleich unterschiedlicher Belastungsund Materialmodelle", Master's Thesis, ETH Zürich, Switzerland. [PDF] [ lower extremity; gait; FEA; ]
* Sullivan, S.R., Langrana, N.A. & Sisto, S.A. (2005), "Multibody computational biomechanical model of the upper body", ASME Conference proceedings, vol. 6. [DOI] [ shoulder; validation; rehab; ]

2004

* Gielo-Perczak, K., Rasmussen, J. & Tørholm Christensen, S. (2004), "An Analysis of Load Transmission Within The Human Body During Pushing and Pulling", In: Proceedings of the XVIII Conference of the International Society for Occupational Ergonomics and Safety, Houston, TX, CD, Group 10, pp. 4-8. [ work place ergonomics; ]
* Rasmussen, J., Tørholm Christensen, S., Damsgaard, M. & de Zee, M. (2004), "The role of mechanics and optimization in ergonomics", 5th ASMO-UK / ISSMO conference on Engineering Design Optimization, Stratford upon Avon, July 12-13, 2004, pp. 10 pp.. [PDF] [ work place ergonomics; rehab; ]
* Rasmussen, J., Tørholm Christensen, S., Gföhler, M., Damsgaard, M. & Angeli, T. (2004), "Design optimization of a pedaling mechanism for paraplegics", Structural and Multidisciplinary Optimization, vol. 26, pp. 132-138. [DOI] [ methods; rehab; ]

2003

* de Zee, M., Andersen, T.B., Hansen, L., Wong, C., Rasmussen, J. & Simonsen, E. (2003), "Simulation of lifting using the better of two worlds: Forward and inverse dynamics", IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 4 pp.. [PDF] [ methods; ]
* Forster, E. (2003), "Predicting muscle forces in the human lower limb during locomotion", Ph.D. Thesis, University of Ulm, Germany. [WWW] [ lower extremity; validation; gait; ]
* Holmberg, J. & Wagenius, P. (2003), "A biomechanical model of a double-poling skier", Milburn, P. (ed.), U. o.O. (Ed): International Society of Biomechanics XIXth Congress : the human body in motion, 6-11 July 2003, Dunedin New Zealand, Dunedin, N.Z., pp. 5 pp.. [PDF] [ sports; ]
* Rasmussen, J., Dahlquist, J., Damsgaard, M., de Zee, M. & Tørholm Christensen, S. (2003), "Musculoskeletal modeling as an ergonomic design method", International Ergonomics Association XVth Triennial Conference, August 24-29, 2003, Seoul, Korea, pp. 4 pp.. [PDF] [ methods; ]
* Rasmussen, J., Damsgaard, M., Surma, E., Tørholm Christensen, S. & de Zee, M. (2003), "Designing a general software system for musculoskeletal analysis", IX International Symposium on Computer Simulation in Biomechanics. Sydney, Australia, 2-4 July, pp. 6 pp.. [PDF] [ methods; ]
* Rasmussen, J., Damsgaard, M., Surma, E., Tørholm Christensen, S., de Zee, M. & Vondrak, V. (2003), "AnyBody - a software system for ergonomic optimization", In: Fifth World Congress on Structural and Multidisciplinary Optimization, May 19-23, 2003, Lido di Jesolo - Venice, Italy, pp. 6 pp.. [PDF] [ methods; ]
* Tørholm Christensen, S., Siebertz, K., Damsgaard, M., de Zee, M., Rasmussen, J. & Paul, G. (2003), "Human seat modeling using inverse dynamic musculo-skeletal models", SAE Technical Paper 2003-01-2221, Society of Automotive Engineers (SAE). [DOI] [ seating; automotive; ]

2002

* Gao, F., Damsgaard, M., Rasmussen, J. & Tørholm Christensen, S. (2002), "Calculating Muscle Line-of-action for Musculo-skeletal Modeling", Biological Cybernetics, vol. 3, pp. 199-210. [ methods; ]
* Rasmussen, J., Damsgaard, M., Tørholm Christensen, S. & Surma, E. (2002), "Design optimization with respect to ergonomic properties", Structural and Multidisciplinary Optimization, vol. 24, pp. 89-97. [DOI] [ methods; ]
* Rasmussen, J., Vondrak, V., Damsgaard, M., de Zee, M. & Tørholm Christensen, S. (2002), "The AnyBody project - Computer analysis of the human body", In: Computer Analysis of the Human Body. Biomechanics of Man, pp. 270-274, The Czech Society of Biomechanics, Cejkovice, Czech Republic,. [PDF] [ methods; ]

2001

* Damsgaard, M., Tørholm Christensen, S. & Rasmussen, J. (2001), "An efficient numerical algorithm for solving the muscle recruitment problem in inverse dynamics simulations", International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3 pp.. [PDF] [ methods; ]
* Rasmussen, J., Damsgaard, M. & Tørholm Christensen, S. (2001), "Optimization of human motion: to invert inverse dynamics", International Society of Biomechanics, XVIIIth Congress, July 8-13, 2001, Zurich, Switzerland, pp. 3 pp.. [PDF] [ methods; ]
* Rasmussen, J., Damsgaard, M. & Tørholm Christensen, S. (2001), "Simulation of tendon energy storage in pedaling", MEDICON 2001, IX Mediterranean Conference on Medical and Biological Engineering and Computing. Pula, Croatia, June 12-15, pp. 4 pp.. [PDF] [ methods; ]
* Rasmussen, J., Damsgaard, M. & Voigt, M. (2001), "Muscle recruitment by the min/max criterion - a comparative numerical study", Journal of Biomechanics, vol. 34 (3), pp. 409–415. [DOI] [ methods; ]

2000

* Damsgaard, M., Rasmussen, J. & Tørholm Christensen, S. (2000), "Numerical simulation and justification of antagonists in isometric squatting", In: Prendergast, P.J., Lee, T.C. & Carr, A.J. (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1 p., European Society of Biomechanics, Royal Academy of Medicine in Ireland. [PDF] [ methods; ]
* Damsgaard, M., Rasmussen, J. & Tørholm Christensen, S. (2000), "Bi-articular muscles as optimum force providers", In: Prendergast, P.J., Lee, T.C. & Carr, A.J. (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, pp. 1 p., European Society of Biomechanics, Royal Academy of Medicine in Ireland. [PDF] [ methods; ]
* Hartung, I. & Sjöström, J. (2000), "Optimering av stakning i längdskidåkningens klassiska stil (in Swedish, with English abstract) [Optimization of poling when cross-country skiing, classical style]", Master's Thesis, Mid Sweden University, Sweden. [PDF] [ sports; ]
* Rasmussen, J., Damsgaard, M. & Tørholm Christensen, S. (2000), "Inverse-inverse dynamics simulation of musculo-skeletal systems.", Prendergast, P., Lee, T. & Carr, A. (Ed): Proceedings of the The 12th Conference of the European Society of Biomechanics, Royal Academy of Medicine in Ireland, pp. 1 p.. [PDF] [ methods; sports; ]

1999

* Rasmussen, J., Damsgaard, M. & Voigt, M. (1999), "Joint Load Identification during Cyclic Movements", In: IUTAM Symposium on Synthesis in Bio Solid Mechanics, Lyngby, May 24-27, 1998, pp. 79-92. [WWW] [ methods; ]


Last update: 2016.11.03

EndOfPublicationsList

AnyBody Technology A/S · Niels Jernes vej 10 · DK-9220 Aalborg · Denmark · Tel. +45 9635 4286 · Fax. +45 9635 4599            Sitemap